Stiskalnica za izsekovanje

BOBST SPO 1600

Leto izdelave: 1979, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Bobst SPO1600 + 2-barvni SPO Flexo Najv. velikost: 1100x1600 mm Najm. velikost: 520x600 mm Najv. hitrost: 6000 pol/h Najv. rezalna sila: 400 T Leto: 1979 Flexo anilox: 1x keramičen in 2x kromiran V proizvodnji Hedsxl Am Uepfx Abhjh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, A UV-LED hybrid large format printer from Agfa, including a roll-to-roll unit, is available. Printing technology: UV-LED inkjet, maximum print width: 2540 mm, resolution: 1200 dpi, print colors: CMYKLcLm+White+Primer, maximum print speed: 275 m²/h, substrate type: rigid/flexible, maximum substrate thickness: 50 mm. Documentation is available. An on-site inspection is possible. Hjdpsww Iu Refx Abhsh

Stanje: rabljeno, Leto izdelave: 1988, Bobst Flexo 1604 Printing Press, 4 bottom printing units, anilox cylinders 120 l/cm and 80 l/cm Bobst Transfer Unit Hodpfov Ifpuex Abheh BOBST SPO 1600 FLATBED DIE-CUTTER, maximum format 1100 mm x 1600 mm / 43.3" x 63", with 4 printing units plus bottom printing, conventional roller feeder - Anilox cylinders: 120 l/cm and 80 l/cm - Open steel chambered doctor blade - Vacuum feeder - Die-cutting section - Waste removal section - Centerline II - High-pile delivery with two elevating tables - Maximum sheet size: 1100 mm x 1600 mm / 43.3" x 63" - Minimum sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Die-cutting force: 400 t - Materials: E, B, C, CB, BE flutes - Maximum speed: 6,000 sheets/hour Machines can be sold separately.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Hedpfx Asvwlqqebhoh Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: rabljeno, Leto izdelave: 1991, številka stroja/vozila: 6172025, Pallet hoist with tray / Pile hoist - Stack Lift Polar L-1000-W-3 Year of manufacture: 1991 - Serial No.: 6172025 Format / Maximum size: 1100 x 750 mm Lifting capacity: max. 1000 kg Lifting height: max. 1400 mm Online video inspection via Skype video available. Hedpjn Aw Ugjfx Abhsh We would be delighted to welcome you for an on-site visit – more machines in stock. Immediately available – Can be inspected Located in Emskirchen / Nuremberg – Can be tested on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za šivanje z nitjo Brehmer Polygraph 39-3/4 Hsdpfjxa Afmex Abheh Vključno z veliko dodatne opreme in potrošnega materiala Stroj je vzdrževan in v zelo dobrem stanju Vključuje opis in vso dokumentacijo – zelo redko Električni priključek 400V/50Hz

Stanje: dober (rabljeno), Adast Grafopress GPE stiskalni stroj Zelo dobro ohranjen, pripravljen za proizvodnjo, po opravljenem pregledu. Hedpfx Ajv E A U Nebhoh Stroj ima vso varnostno opremo. Izvozna izvedba. Oprema vključuje tiskarske valje. Naprava je namenjena izsekovanju, tisku, biganju, oštevilčenju itd.

Leto izdelave: 1987, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Asitrade Single Facer E-flute and B-flute Year: 1987 – completely overhauled in 2019 Hedstxlv Hopfx Abheh Unwinder: 6 stations Max. working width: 1410 mm Max. speed: 150 m/min Core diameter: 100–140 mm Max. roll diameter: 1300 mm Water spray system

Leto izdelave: 1972, Stanje: pripravljen za uporabo (rabljen), Format: 1000x700 mm, an on-site inspection is possible. Hedpsqzkdqefx Abhsh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 330 t, Machine for Die-Cutting, Embossing, Waste Stripping, and Blank Separation - as is - System equipped with a high-performance sheet feeder designed for fully automatic NON-STOP operation ⦁ for fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ for stripping internal waste as well as side and trailing edges of the sheets ⦁ for stacking the die-cut and stripped sheets with the attached gripper edges, or ⦁ for separating gripper edges and subsequently stacking the remaining blanks ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a pile stacking device enabling fully automatic separator sheet insertion and NON-STOP delivery, with no changeover required even for the smallest cut formats (exchange table with comb structure) ⦁ separator sheet magazine with automatic level control, refillable during operation ⦁ equipped with Centerline system ⦁ with automatic pallet changer at the delivery section Specifications Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum die-cutting force: 3.3 MN (330 t) Hjdpfxjww E Nre Abhsh Speed: 9,000 sheets/hour Materials processable: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4%) Equipment: Optical sheet alignment (Dyset) automatic non-stop feeder stripping station blank separation station Centerline fully automatic pallet changer at the delivery section including platform quick-lock frames in all tooling stations