Popolnoma prenovljeno vroče radialno kovanje

CNC GFM SX-16

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Nedetzdyzopfx Ag Tswc Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Leto izdelave: 2018, Stanje: novo, Brand new freeze dryer. Pilot plant. Nwodpsfn Iudjfx Ag Tec Capacity: 1 kg product / 8 h. Effective area: 0.15 m² Raw material per 8 h: 1 kg. Final dry product per 8 h: 0.2 kg. Drying temperature range: 30°C-100°C. Material: Stainless steel 304. Maximum vacuum pump capacity: 13 m³/h Water removal capacity: 0.8 kg Final condensation temperature: -40°C Freeze dryer dimensions: 1.1 m × 0.7 m × 1.5 m

Stanje: dober (rabljeno), Weiler E70 CNC Strug s prizmom vretena Godina: 2003 Nedpfxswmqkyj Ag Towc Rastojanje između centara: 2000 mm Provrt vretena: 8" (200 mm) Mašina opremljena sa: Prednji i zadnji stezna glava Konjić Fiksna luneta

Stanje: rabljeno, Leto izdelave: 2004, Presskraft: 630 t Hub: 800 mm Ständerweite: 2.600 mm Abstand Tisch/Stößel (bei oberem, verstelltem Hubanschlag): 1.500 mm Tischfläche: 2.500 x 1.300 mm Ziehkissendruck (im Tisch): 300 t Ziehkissenhub (im Tisch): 300 mm Stößelfläche: 2.500 x 1.300 mm Seitlicher Ständerdurchgang: 1.040 mm Abwärtsgeschwindigkeit: ab 600 mm/sec Aufwärtshub-Geschwindigkeit: 360 mm/sec Arbeitsgeschwindigkeit: 14 – 42 mm/sec Antriebsleistung: 145,0 kW Maschinengewicht: 85,0 t Platzbedarf (BxTxH): 4,2 x 4,0 x 7,8 m Bauhöhe über Flur: 6,80 m Bauhöhe unter Flur: 1,0 m Vorführmaschine aus einer technischen Hochschule mit ca. 920 Betriebsstunden – neuwertiger Zustand! Für Handbeschickung gemäß CE-Norm zugelassen. Mit ölhydraulischem Antrieb, druck-, zeit- und wegabhängig steuerbar, oberer und unterer Hubbegrenzung, Lichtschranke (Sick) vorder- und rückseitig, hydraulischem Ziehkissen im Tisch inkl. Auswerferfunktion, hydraulischer Schnittschlagdämpfung, mechanischem Tiefenanschlag über 4 motorisch verstellbare Spindeln, hydraulischer Stößelverriegelung, Zweihandbedienung, 2 Werkzeugwechselkonsolen, 4 hydraulische Kugelrollenleisten im Tisch, 4 Schwingelemente. Nwedpjv Svarofx Ag Tec English translation: Press force: 630 t Stroke: 800 mm Upright clearance: 2,600 mm Distance table/ram, max. stroke up (adjusted): 1,500 mm Table size: 2,500 x 1,300 mm Cushion force in table: 300 t Cushion stroke in table: 300 mm Ram area: 2,500 x 1,300 mm Side frame pass opening: 1,040 mm Downward speed: from 600 mm/sec Upward speed: 360 mm/sec Working speed: 14 – 42 mm/sec Drive motor power: 145.0 kW Machine weight: 85.0 t Space requirements (W x D x H): 4.2 x 4.0 x 7.8 m Overall height above floor: 6.80 m Foundation pit depth below floor: 1.0 m Demonstration machine from a technical university with approx. 920 operating hours – as new condition! Approved for manual loading/unloading according to CE standards. Equipped with electro-hydraulic drive, pressure/time/position-dependent controls, upper and lower stroke limit, light barriers (Sick) front and rear, hydraulic die cushion in table incl. ejector function, hydraulic cutting shock absorber, mechanical depth stop via 4 motorised spindles, hydraulic ram locking, two-hand operation, 2 die change consoles, 4 hydraulic ball roller strips in the table, 4 vibration-damping elements.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Wheel diameter - max. 100 mm Wheel width 26 mm Module - max. 3 Module - min. 0.1 Control system Siemens 840 D SL Operating hours 9,598 h Total power requirement 45 kW Machine weight approx. 7 t Space requirement approx. 4x3x2.5 m Gleason 100S Gear Shaping Machine for manufacturing internal and external cylindrical gears and other regularly recurring rollable profiles and shapes on the cylindrical workpiece circumference, as well as for single-piece production of profiles. Technical specifications: Nominal workpiece diameter 100 mm Maximum rotating diameter 150 mm Nominal module of the machine approx. 3 mm (reference value depending on the respective machining task) Stroke spindle speed range 0 - 3,000 rpm Manual stroke position adjustment range 20 mm Maximum gear width 26 mm Minimum rise height of hydrostatic skew guide 400 mm Minimum/maximum distance between tool and workpiece spindle -20/+180 mm Column tilt range (manual) -1/+11° Tool holder (manual clamping) HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight approx. 7,000 kg Njdpfxjv Ehbbo Ag Tswc with robot cell

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 5.991 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11415584024, For sale is a 5-axis CNC machining center DMG MORI DMU 50, year of manufacture 2012, equipped with a Siemens control system. The machine is in good, well-maintained condition and was in operation until recently. An on-site inspection under power is possible by appointment at any time. The DMU 50 is a vertical machining center with an integrated NC rotary/swivel table, making it ideal for precise 5-axis complete machining of complex workpieces. Typical applications include tool and mold making, manufacturing of precision components, as well as prototypes and small to medium production runs. Technical data (extract): Manufacturer: DMG MORI / Deckel Maho Model: DMU 50 Machine type: Vertical 5-axis CNC machining center Year of manufacture: 2012 Control system: Siemens Number of axes: 5 simultaneous X travel: approx. 500 mm Y travel: approx. 450 mm Z travel: approx. 400 mm Spindle: Vertical motor spindle, up to approx. 14,000 rpm Tool changer: automatic, approx. 30 tool stations Country of origin: Germany Worktable Simultaneous-capable rotary tilt table Control 3D control Siemens 840D solutionline Main drive Spindle speed up to 14,000 rpm SK40 Tool magazine Tool magazine 60 stations, SK40 vertical chain Automation / Measuring / Monitoring Infrared probe TS649 DMG Direct measuring systems X/Y/Z Cooling / Chip removal Coolant-air switch-over Rinsing gun for chip cleaning Siemens Control Options Electronic handwheel General Options Mode 4 operation Second cabin door Special constructions Rotating viewing window (S-K3008) Operating hours (according to meter): Machine hours: approx. 31,987 h Spindle hours: approx. 10,489 h Condition & Scope of delivery: Used, fully functional, regularly in operation. Scope of delivery includes the machine as shown, further accessories by arrangement. Nedpfex S D N Tex Ag Tjwc Miscellaneous: Location: Birkenfeld (75217)

Stanje: rabljeno, Leto izdelave: 2022, številka stroja/vozila: 8525-6-9605-FA, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Hexagon Absolute Arm with 6 axes (S/N: 8525-6-9605-FA; year of manufacture: 05.09.2022) including: - CPW-5076-FA (Control Pack Wireless) - MAGNETIC BASE - Reference bar - Certified sphere for calibration - Standard probe kit Nodpfx Ajwzkmkeg Towc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2-1, 2006, Eurobend CNC 16x4 wapeningsstaal uit haspel richt- en knipmachine, gebruikt maar werkend. 4 x 5 ton haspelwagens met pneumatische remmen. 4 x rotoreenheden voor het richten van betonstaal in diameter 8-10-12-16 mm en automatische afkorting met hydraulisch bewegende messen. Mogelijkheid tot knippen van 1 lijn of gelijktijdig tot 4 lijnen. PC met optie voor barcodescanner. Afkortlengte tot 14 meter of meer. Opvangvakken voor opslag. Kettingtransporteur voor het transport van bundels. Nwodpfxjrdvq Aj Ag Tjc

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Feeding chamber dimensions: 280x580 mm, loading height: 700 mm, maximum load: 300 kg, equipped with safety enclosure and documentation. The machine was fully operational until recently; however, a complete maintenance service is required. Inspection is possible. Nwedpsqgfbgsfx Ag Tjc

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. Nwedpfx Agjhzbipe Tjc - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.