Doziranje Vijak nakup rabljenega (1.110)

Leto izdelave: 2002, Stanje: skoraj kot novo (rabljeno), L x W x H: approx. 12.1 x 3.0 x 3.25 m Volume: 55 cbm Conveying capacity: approx. 150 m³/h 6 dosing/discharge screws – driven in pairs, each with 11 kW Weight: approx. 15 t Previously operated in an RDF facility Duodsllvpzepfx Aflol

Stanje: skoraj kot novo (rabljeno), Dobro delujoče stanje. Prosimo, oglejte si tudi naše druge oglase. Duodpoimwxwefx Aflol

Stanje: dober (rabljeno), Primež, mizni primež, ključavničarski primež, vpenjalni primež, primež za delovno mizo, vpenjalni primež, namizni primež - Proizvajalec: Bernstein, kroglični primež Spannfix, vrtljiv 360° + nagibljiv 45° - Vpenjalne čeljusti: 45 x 25 mm - Širina vpenjanja: 90 mm - Namizna spona: do 82 mm - Transportne dimenzije: 310/10/110 mm Dujdpfxsx S Rq Ro Aflel - Teža: 1,4 kg

Stanje: dober (rabljeno), 150 RABLJEN stroj Reimelt, avtomatsko doziranje mikrokomponent, doziranje surovin, doziranje sladkorja, soli, moke, doziranje izboljševalcev. Izvajanje receptur. OPREMA: - 6 pravokotnih nerjavečih rezervoarjev (dimenzije: višina 250 cm, širina 100 cm, globina 176 cm), - avtomatika, - pnevmatika, - konstrukcija, - dovodne in odvodne cevi za surovine, Djdoxfh Eiepfx Afleul - dokumentacija, - naprava brez krmiljenja. ZUNANJE DIMENZIJE SKLOPA (v cm): - dolžina: 250, - višina: 270, - širina: 650. Naprava je pripravljena za ogled in se nahaja v našem skladišču (36-068 Bachórz, Poljska). Plačljive opcije: remont / transport / montaža / zagon. Cena je neto. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZSKO, RUSKO, UKRAJINSKO.

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Technical Details: Manufacturer: • MEYER PLANTTEC • PLANER Systemtechnik Model / Description: Weighing System Ricon 603 Control Cabinet Type: 2005767 = P1 Power Supply: 400 VAC / 50 Hz Control Voltage: 24 VDC Maximum Fuse Capacity: 25 A Dujdpjx Itr Nefx Aflsl Rated Current: 8 A Total Weight: 60 kg Serial Number: 2005767-1 Year of Manufacture: 2020 PST Drawing Number: 161-10-760-02 2. System Overview (Visible Components) 2.1 Structural Frame • Welded steel frame with grating working platform • Integrated drum support area • Installed linear guide rails and table components • Lower grating section for drainage or spill containment 2.2 Pump and Mixing Section Mounted on the left side: • Vertical, motor-driven pump assembly, equipped with INVEOR motor controller • Pump inlet connected to a chemical container positioned on the system frame • Stainless steel pipes connected to valve block and dosing line 2.3 Valve and Drive Unit • Stainless steel valve block with flanged connections • Pneumatic rotary actuator: AIR TORQUE Germany Type/Model: SC0050-AJZ Series: FGF-010-S-17 Pressure Range: max. 10 bar Torque Values: 29 Nm (min) / 60 Nm (max) Temperature Range: –40 °C to +180 °C Connections: 1/4" Certification: CE, ATEX (EX II 2 G Ex h IIC T6 Gb X / Ex h IIIC T85°C Db X) Year Code: 20138769

Stanje: rabljeno, Leto izdelave: 2000, Proizvajalec: Atoma Model: 823-C-400 Letnik: 2000 Število tehtalnih kanalov: 3 Največja teža: 400 g Dsdpfx Ajx Rz Hgsfljul Dopustna napaka (e): 0,5 g Dovajanje preko lijaka in vibracijske proge. Transportni trak Zaustavitev izdelka s celico

Leto izdelave: 1980, Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 2489, Stock No. 2489 1 used, function-tested single-screw extruder, ready for demonstration Manufacturer: KUHNE Germany Model: ES 60-24 Screw diameter: 60 mm – 24 LD Feed zone is coolable Screw speed up to 100 rpm Drive: 25.5 kW – 63 A – DC 4x barrel heating zones with blower cooling 3x head heating zones Control cabinet and operator console The machine is ready for demonstration; a test run with your material can be arranged at short notice at our Wuppertal facility. Dsdpfxjd Sg Hce Afljul Accessories such as screen changers, pelletizers, etc. are available at additional cost. Details upon request. Further extruders available from stock—visit us or request our current machine inventory list.

Stanje: rabljeno, Press screw REG-MAC for drying films and fibers, and for compacting foam material (e.g. Styrofoam, EPS) Drive motor 55 kW Dusdpfx Aoxgtd Heflsl

Stanje: dober (rabljeno), Ball screw with nut, Transroll screw, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: Rexroth -Type: 102553 -Type: 2492458 -Thread diameter: 48 mm Dujdpfx Ascp Anmjflel -Thread pitch: 30 mm -Overall length: 2285 mm -Weight: 34 kg

Stanje: dober (rabljeno), 149 RABLJENA Reimelt stroj, samodejno doziranje mikrokomponent, doziranje surovin, doziranje sladkorja, soli, moke, doziranje izboljševalcev. Izvajanje receptur. Dusdpex Nn Nrefx Aflsl OPREMA: - 6 okroglih posod iz nerjavečega jekla (dimenzije: višina 70 cm, premer 60 cm, prostornina: cca 150 L.) - avtomatika, - pnevmatika, - upravljanje, - konstrukcija. ZUNANJE DIMENZIJE (v cm): - dolžina: 300, - višina: 300, - širina: 300. Naprava je pripravljena za ogled in se nahaja v našem skladišču (36-068 Bachórz, Poljska). Na voljo plačljive možnosti: prenova / transport / montaža / zagon. Navedena cena je neto cena. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZSKO, RUSKO, UKRAJINSKO.

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2025, Elektronski uređaj za doziranje vode sa prikazom temperature NOVO NOVO WMD Aquamix 11 NOVO NOVO Vaše prednosti: brzo i precizno unošenje količine vode pregledna upravljačka tabla sa velikim i osvetljenim displejem kompaktno, kućište od nerđajućeg čelika, otporno na brašno i prašinu jednostavno povezivanje sa instalacijom za ledenu vodu sa automatskim ponovnim doziranjem Tehnički podaci: Duedpfofmciisx Aflol Dozirni opseg: 0,1 l - 999,9 l Preciznost temperature: samo prikaz Preciznost doziranja od 1 l: +/- 0,1 l Protok vode pri 3 bara: do 30 l/min Priključak za vodu: 3/4" spoljašnji navoj Samo kod nas: DGUV V3 testirano Priključak za struju: 100 - 240V; 50Hz Dimenzije uređaja Š x V x D: 200 x 300 x 130 mm NOVO & SAB testirano sa garancijom + servis rezervnih delova Opcije: Leasing & rentiranje Usluga montaže Isporuka i puštanje u rad Posetite naš prodajni centar i pogledajte još mašina i uređaja!

Stanje: dober (rabljeno), Technical data for the locking pin: System: Elvedi Type: HRZ 15 Scope of delivery includes: 01x Locking pin, used for cantilever racking Material finish: galvanized Dimensions: 178 x 24 x 17 mm (LxWxH) Weight: 0.660 kg/each For securing cantilever arms against unintentional lifting Currently in stock: approx. 350 pcs. The stated price is the collection price incl. VAT. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or delivery of this item is required, additional costs will apply, which can be provided on request depending on place of delivery or quantity. Duedpowdvzlofx Aflsl

Stanje: rabljeno, The bottles, which are selected by a screw, are then placed onto the rotating carousel and guided by a starwheel. First station: Disgorging – The bottles are first gripped by the neck and their bodies are then guided along the inclined path by the infeed system. Each bottle carrier is equipped with an adjustable disgorging system and a thumb device to prevent wine loss. Second station: Partial extraction, up to 6 centiliters (bottle in upright position). Third station: Dosage of the sealed bottle, tilted to 60 degrees; dosage control is performed both above and below. Duedpfox Iv Uajx Afljl Fourth station: Wine topping up (upright bottles) using a small, pneumatically adjustable pump to ensure perfect filling. The machine features a robust and well-maintained construction, with a frame and housing made from top-quality stainless steel. The upper part is made from transparent polycarbonate. Basic machine configuration is suitable for processing 0.75 liter, 0.375 liter, and Magnum (1.5 liter) sparkling wine bottles, as well as special bottles upon request. Capacity: Up to 1,500 bottles/hour with electronic variator. Motor: 0.55 kW Dimensions: Depth: 1,630 mm / Width: 1,600 mm Weight: 550 kg

Leto izdelave: 2018, Stanje: rabljeno, Predmet prodaje je delujoč, rabljen polžasti transporter s premerom polža 50 cm. Naprava je bila več mesecev uporabljana na liniji za dovajanje zelenjave v luščilnik. POLŽASTI TRANSPORTER Tip PSL.U500/1,8 • Naprava namenjena dovajanju zelenjave v zalogovnik luščilnika • Dovajalni lijak prilagojen za ročno doziranje, H=800 • Korito polža U-profila, širina 500 mm, dolžina cca 2700 mm • Višina dovajanja do zalogovnika luščilnika cca 1800 mm • Čistilna odprtina za pranje v spodnjem delu korita; delovni kot cca 45° • Ležaji nameščeni izven delovnega območja; spodnje tesnilo gredi s pleteno vrvico • Konstrukcija stoji na nastavljivih nogah in kolesih Dusdexnrr Sspfx Aflsl • Hitrost dovajanja je nastavljiva s frekvenčnim pretvornikom, zunanji potenciometer na upravljalni plošči • Krmilna plošča iz nerjavečega jekla, stran montaže po dogovoru • Električni priključek: N=2,2 kW, ~3x380 VAC, 50Hz

Stanje: dober (rabljeno), Grease pins for rope pulley, steel wire rope pulley, rope deflection pulley, crane rope, four-rope multi-shell grab, orange-peel grab, mechanical multi-shell grab, clamshell grab, ship unloading grab, scrap grab, waste grab, rope grab, grab bucket, crane pin, grease pin - Grease pin: Crane pin type 75x145 M48 Duedpfov Ilc Isx Aflol - Shaft: Ø 59.6 mm - Art.: 1045 1707 - Quantity: 10 pins available - Price: per piece - Dimensions: Ø 80 x 150 mm - Weight: 3.4 kg/unit

Leto izdelave: 2010, Stanje: dober (rabljeno), 3 pcs. ball screw spindles (from HURON BAZ) Manufacturer: SCHNEEBERGER Diameter: 63 mm Diameter: 50 mm Diameter: 40 mm Dujdpfx Ash I T Nrsflel In good condition.

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 11.000 h, Funkcionalnost: popolnoma funkcionalen, Processing and dosing plant for green waste, wood chips, and biomass fuel, consisting of: - 2 x feed bunkers 1,500 x 8,000 mm, with dosing and disentanglement stages - Drum screening unit 2,300 x 7,000 mm, screening drum 15 mm² - Overband permanent magnet separator - Disc separator 1,500 x 4,500 mm, cut size 15–100 mm² - Support structure, steel construction - Conveyor belts, distribution belts - Control cabinet with control system Manufacturer: Rudnick & Enners Project No.: AF4 167 C Year of manufacture: 2015 Operating hours: approx. 11,000 h Location: Hesse (Germany) Availability: August 2024, by arrangement Service details: The plant is in technically very good condition. Warranty: The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. All prices ex location, net plus statutory VAT, excluding dismantling, packaging, transport, and crane provision! Duedpfx Afstynftolel Interim sale, modifications, and repairs reserved. This overview serves solely for information purposes and does not constitute a binding offer.

Stanje: dober (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5083, potovalna razdalja osi X: 440 mm, pomik osi Y: 440 mm, pomik po osi Z: 210 mm, For sale: B3000 dosing machine in very good overall condition Dedpsxzpdxefx Afleul Due to the closure of our site, we are selling our B3000 dosing unit, which is only two years old. The machine has seen little use and currently has a book value of CHF 120,000. Additionally, a credit note worth €9,000 for the procurement of spare parts for this machine from BDtronic is included in the sale. The machine is set up until January 2026 and can be inspected in Mendrisio. Please note that it is currently decommissioned and will require a full maintenance service before being recommissioned. A demonstration in running operation is therefore not possible at this time. Technical key data: - Sequential dosing of three different resins or foams - Delivery rate: 1–4 g/s Processed materials: - Elantas Elan-tron PU 505 HR/PH3 - Elantas Elan-tron PU 505 LR/PH3 - Elantas Micares X1080 R14/P 978 Further technical details and dimensions can be found in the attached PDF documentation. Inspections are possible by appointment. Disassembly and transport to be organized by the buyer. Dismantling can be supported by Bdtronic, who estimate 3 days’ work at €2,770 per day.

Stanje: rabljeno, Dozirna enota, dozirni polž, dozirni lijak. Opremljeno s premičnim dnom za preprečevanje mostičenja. Opremljeno z nadzorno omarico. Premer polža približno 30 mm. Oglejte si naše druge oglase. Dodpfsx Nzvfex Afljul VMA Wekerom

Stanje: zelo dobro (rabljeno), Ball screw with nut, Transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Quantity: 2 spindles available Dujdpfod Iqqisx Aflsl -Price: per piece -Weight: 6.8 kg

Stanje: rabljeno, Dozirni polž iz nerjavečega jekla, dovajalni polž, vijačni transporter. Vključno z dodatnim zalogovnikom z aluminijastim pokrovom. Premer polža 200 mm. Moč motorja 3 kW, 36 vrt/min. Skupna dolžina 1730 mm. Oglejte si še naše druge oglase. VMA Wekerom. Dujdpfx Afjx Nzu Ujlsl

Stanje: dober (rabljeno), Grease pin for wire rope sheave, steel cable sheave, rope deflection sheave, crane rope, four-rope clamshell grab, orange peel grab, mechanical multi-shell grab, clamshell bucket, ship unloading grab, scrap grab, waste grab, rope grab, grab bucket, bolt, crane bolt, grease pin - Grease pin: crane bolt type M48 - Shaft: Ø 69.5 mm - Quantity: 8 crane bolts available - Price: per piece - Dimension: Ø 92 x 280 mm Dsdpfjv Ikrusx Afljul - Weight: 9.3 kg/unit

Stanje: dober (rabljeno), Lubrication pins for rope sheave, steel rope sheave, deflection pulley, crane rope, four-rope clamshell grab, orange peel grab, mechanical multi-shell grab, clamshell grab, ship unloading grab, scrap grab, waste grab, rope grab, grab bucket, pin, crane pin, lubrication pin - Lubrication pin: Crane pin type 75x145 M48 - Shaft: Ø 59.6 mm Dodpfx Afsv Illcolsul - Quantity: 7 pins available - Price: per piece - Dimensions: Ø 80 x 170 mm - Weight: 3.9 kg/pc.

Stanje: dober (rabljeno), Leto izdelave: 2008, Monopump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump Pumps: for tunnel excavation Speed adjustable: 120–600 rpm Drive: 5.5 kW Speed: 20–220 rpm Pump capacity: 80–100 l/min Max. pressure: 16 bar Djdob A Igmopfx Afljul Pipe connection diameter: DN 100 Dimensions: 3900/470/H1070 mm Weight: 722 kg

Stanje: dober (rabljeno), Ball screw with nut, Transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod Dsdpfx Ajcp Anpsfleul - Manufacturer: Rexroth - Type: R150257086 - Type: 69115 40H - Thread diameter: 48 mm - Thread pitch (double start): 20 mm - Total length: 1995 mm - Weight: 26 kg