Traub Tns 42 nakup rabljenega (94)

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 60.764 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030637, Stroj je v dobrem, takoj za uporabo pripravljenem stanju in ga je trenutno možno ogledati pod napetostjo. Stroj mora razstaviti in odpeljati kupec. Stroj ima 2 revolverski glavi, vsaka s 12 orodnimi mesti, vsa orodna mesta so gnana. Poleg tega ima sprednjo napravo s 5 orodnimi mesti, od katerih so 4 gnana. Zadnja naprava ima 5 orodnih mest, 4 so gnana. Vpenjalni sistem glavnega vretena je Hainbuch 32, za nasprotno vreteno pa Axfix znamke Hainbuch. Pgedpfx Aasw N Rziefsu Priložiti je mogoče različne osnovne nosilce.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turret heads: 1 MAIN SPINDLE - Spindle drive power: 10.7 kW - Spindle speed: 6300 rpm - Max. bar diameter: 36 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle drive power: 10.7 kW - Spindle speed: 6300 rpm - Max. bar diameter: 36 mm - Minimum C-axis resolution: 0.001° - Traverse paths X/Z: 370 x 250 mm LEFT UPPER TURRET - Number of positions: 12 - Number of driven positions: 12 - Traverse paths X/Z: 50/100 mm - Traverse path Y: +/-20 mm - Driven tool speed: 6000 rpm - Driven tool power: 5.5 kW DRILLING UNIT - Number of driven positions: 4 - Driven tool speed: 6000 rpm - Driven tool power: 4.3 kW - Traverse paths X/Z: 370 x 270 mm OPPOSITE DRILLING UNIT - Number of tools: 5 - Number of driven tools: 4 - Driven tool speed: 6000 rpm - Driven tool power: 4.3 kW - Strokes X/Y: 73 x +/-50 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 33 kW WEIGHT AND DIMENSIONS - Required space: 3335 x 1222 mm - Machine height: 1680 mm - Machine weight: 4000 kg OPERATING HOURS - Power-on hours: 41,698 h - Operating hours: 11,346 h ACCESSORIES - Control: TRAUB TX 8i - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor Pedpfjuhadhsx Aafsgu - Parts removal - Parts belt conveyor - Bar feeder: LNS HYDROBAR EXPRESS 332 (2005)

Stanje: zelo dobro (rabljeno), CNC machine Traub TNL 26 Condition: used, well maintained Pgsdpfx Ashlp Sdsafeu Sale without any warranty

Leto izdelave: 1983, Stanje: pripravljen za uporabo (rabljen), Swing diameter: 320 mm, turning length: 1000 mm, spindle bore: 80 mm, spindle speed: 3150 rpm, travel X/Z: 265 mm / 1000 mm. Machine dimensions (L/W/H): approx. 5500 mm / 2400 mm / 2400 mm, weight: approx. 7000 kg, control system: Traub System TX-8. Includes a set of tools, 3-jaw chuck, and bar feeder with collets. Documentation available. On-site inspection possible. Pgedpfxowzld Dj Aafsu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 364, model krmilnika: Traub TX8F, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control unit: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Sub spindle 2 turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Pjdpfx Aasw Ec Alofogu Chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, obratovalne ure: 49.274 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 247, stružna dolžina: 80 mm, največja hitrost vretena: 12.000 obr/min, dolžina podajanja os X: 35 mm, dolžina pomika po osi Y: 37 mm, dolžina podajanja os Z: 75 mm, Premer palice (maks.): 12 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Main spindle Technology: Belt-driven spindle Max. speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel in Z1: 75 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Max. speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: Collet chuck Pgedpfx Aajvrz E Hjfeu Turret I (X/Y) Technology: 6-station turret (all stations powered) Tool holder: Ø 25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Installation dimensions: 7,943 x 1,430 x 1,480 mm Control on-time: 96,171 h Machine on-time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: Coolant pump - Raw material feeding: Bar loader, FMB minimag 3200 - Finished parts discharge: Finished part removal system (tube) - Emulsion mist extraction: Interface mechanically prepared - Tool holders: Various static and driven holders

Stanje: novo, 3 safety glass panes suitable for CNC lathe TRAUB TNA 300 TNA 400 Psdpfx Aaew Edq Dofjgu TNA 500 TNC 42 TNC 65 Size: 660 x 480 mm Price: €500.00 / unit net Delivery time: immediate, subject to prior sale Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] Pgsdpfx Aeuhav Doafeu - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 86.157 h, The machine was built in 1999 and underwent an 8,000-hour maintenance last year. Total machine operating hours: 86,157 h. Turret 1 is equipped with 14 stations (with Y-axis). Pjdpewur N Tsfx Aafjgu Turret 2 is equipped with 10 stations (without Y-axis).

Leto izdelave: 1986, Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 360mm/160mm, centre distance: 800mm, travel X/Z: 205mm/810mm, spindle speed: 3,150 rpm, spindle bore: 60mm, tool stations: 8, rapid traverse X/Z: 10 m/min. Machine dimensions X/Y/Z: approx. 3,300mm/1,800mm/1,800mm, weight: approx. 3,300kg, control: Traub System TX-8. An on-site inspection is possible. Psdpfswmqx Dex Aafogu

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Traub CNC Turning Machine TNC65DGY, TX8I, year 2005, serial no. 1130 Description: Y-axis on S1, V-axis, 2x C-axis, 2x driven tool stations, 2 turrets VDI30, Hainbuch BZI65 clamping system on main and counter spindle, parts catcher, Iemca Master 880MP-E bar feeder. Condition: Pgjdpfx Aaewi I Eyefeu Very well maintained, good condition, serviced. Machine geometry checked and corrected/adjusted. The machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly covers only the spare parts, not downtime hours, labor time, or travel time. The warranty expressly does not cover parts other than those listed above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5318, izvrtina vretena: 26 mm, največja hitrost vretena: 4.750 obr/min, TECHNICAL DETAILS Max round diameter: 26 mm Max square dimension: 18 mm Pgjdpfx Aswtq Ursafou Max hexagon dimension: 22 mm Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 - 4,750 rpm Tool holder: 6 slots MACHINE DETAILS Length L -- R: 1,800 mm Width F -- B: 1,000 mm Height: 1,400 mm Weight: 800 kg Total power: 3.2 kW Operating voltage: 380 V 50 Hz

Stanje: rabljeno, Leto izdelave: 1987, Control system: Traub TX 8D Swing diameter over cross slide: 660 mm Swing diameter over face slide: 445 mm Turning length: 1000 mm Spindle bore: 80 mm Spindle speed: 2,000 rpm Number of tool stations: 14 positions Chuck diameter: 250/315 mm Operating hours: approx. 39,794 h In our estimation, the machine is in good used condition and can be inspected under power by appointment. Pgjdsv Ig D Tspfx Aafeu Accessories, displayed tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and information are subject to change and error. Prior sale reserved!

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] Pgedpfouhaw Uex Aafou - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Pgodpfx Aajwuddvefeu Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), A universal CNC lathe Traub is available. Swing diameter over bed/cross slide: 400mm/360mm, maximum/standard turning diameter: 360mm/320mm, maximum turning length: 1000mm, distance between centers: 2000mm, chuck diameter: 315mm. Spindle bearing diameter: 160mm, spindle bore: 80mm, speed: 4000rpm, power: 26kW, tool positions: 14. Travel X/Z: 180mm/1000mm, feed rate: 24mm/rev, rapid traverse X/Z: 1000mm/1500mm/min. Tailstock quill diameter: 100mm, quill stroke: 200mm. Machine dimensions X/Y/Z: approx. 5800mm/2400mm/2400mm, weight: approx. 7200kg, control: Traub System TX-8-D. Documentation available. Inspection on site is possible. Pgodpfxswrrq Es Aafeu

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 • 2x 10-position turrets with live tooling drive VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts catalogue, circuit diagram, ATC optics Very good condition. Pgedpfx Aaowi Izhofou Machine can be inspected under power. Machine geometry has been checked and corrected/set.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25//16455, največja hitrost vrtenja: 2.800 obr/min, vrtljajska hitrost (min.): 1.400 obr/min, stružna dolžina: 65 mm, TECHNICAL DETAILS Turning length: 65 mm Pgodswtq Ulopfx Aafsu Threading length: 40 mm Maximum part length: 65 mm Spindle speeds: 1,400–2,800 rpm MACHINE DETAILS Total power requirement: 2.6 kW Machine weight: 0.7 t Space requirement: 1,200 x 700 x 1,600 mm Main voltage: 415 V

Stanje: dober (rabljeno), Leto izdelave: 1989, 1 x Automatic Lathe Manufacturer: Traub Model: TD 16 Year of manufacture: 1989 with hydraulic bar feeder LNS Hydrobar Model: 3.16-HS 4.4 Year of manufacture: 1989 Equipment: 6-position turret head Quick-action material clamping Long turning device Central lubrication system by Vogel Pjdevga A Tjpfx Aafogu Accessories: See photos The machine can be inspected under power.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET HEAD Pgedpouhaxfofx Aafju - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Leto izdelave: 1994, obratovalne ure: 38.274 h, Stanje: pripravljen za uporabo (rabljen), Spindle bore: 42 mm, turning diameter over cross slide/bed: 170/400 mm, spindle speed: 56–5600 rpm, control system: TX 8F. Equipped with four driven tools, various VDI30 tool holders, 15 bar high-pressure pump, and a measuring arm for tool measurement. Operating hours: 38,274 h. Baumüller drive BUH-4-55-6-002 is showing a fault message and requires servicing. On-site inspection is possible. Pedpfeq A S Dujx Aafogu

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 51.400 h, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main / sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, New hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed tool holders Pgjdpjwxc Hksfx Aafju Short bar loader Breuning Approx. 114,586 operating hours Approx. 51,400 production hours Good condition Under power, available for inspection Delivery time approx. 2 weeks, by arrangement

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis increment: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: main spindle Pjdpfx Aasuhawzefogu - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of bushings and collets for bar feeder magazine - Set of spare parts

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 4 SUB MACHINING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL Pgodpfxjuhawuo Aafsu - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Bushings: 4 - Set of sleeves and collets for bar loader - Tool presetting device

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW DIMENSIONS AND WEIGHT Pgjdpfx Aaouhadzefju - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status light - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Number of driven tool holders: 6 - Number of static tool holders: 33 - Collet chuck: 2 HAINBUCH