Traub Tns 42 nakup rabljenega (93)

Stanje: dober (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Traub CNC stružnica TNA480, TX8D, letnik 1990, št. stroja >550 C-os, pogon rotirajočega orodja, 1 revolver VDI40, konjiček, transporter za ostružke, votli vpenjalni valj, 3-čeljustna glava KNCS315. Hjdpfxszcdgfs Adrefh Dobro stanje, pripravljena za obratovanje Geometrija stroja je bila preverjena in popravljena/nastavljena Brisalci in jermeni so bili pregledani, zamenjani, servis pri 4000h. Slike so iz proizvodnje, stroj bo še očiščen in pregledan. Stroj je možno ogledati pod napetostjo.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 x avtomatski stružni stroj Traub A 25 Oprema: Hodpfjzcdp Hsx Adrofh Vrtalna konjička Naprava za vzdolžno struženje Podajanje z utežjo Lep, popoln stroj v tehnično brezhibnem stanju. Stroj si je mogoče ogledati pod napetostjo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 124.706 h, največja hitrost vretena: 6.300 obr/min, potovalna razdalja osi X: 370 mm, pomik po osi Z: 250 mm, moč vretenovega motorja: 10.700 W, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i (64-bit), število osi: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced features such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking for a high-quality lathe, you should consider the TRAUB TNK 36 horizontal lathe we are offering for sale. Contact us for further details. TECHNICAL DATA • MDE interface: Yes • Tool monitoring: Yes • Rigid tapping: Yes (without compensation chuck) • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Upper turret stroke X/Z: 50 / 100 mm • Rear attachment X stroke: 73 mm • Rear attachment Y stroke: ±50 mm • Main spindle C-axis: Yes • Hainbuch quick-change parts: Yes • Hainbuch setup aid base body: Yes • Hainbuch manual quick-change device: Yes • Sub spindle: Motor spindle • Sub spindle C-axis: Yes • Counter pressure device: Yes • Workpiece ejector: Yes • Hainbuch Axfix chuck: Yes • Upper tool carrier: Yes • Electronic gearbox: Yes • X3 cross-axis for front unit: Yes • Front unit: 5-position • Driven tools at the front unit: Yes • Parting-off side machining station: Yes • Driven tools at parting-off station: Yes • Workpiece unloading device: Gripper • Coolant tank capacity: 230 l • Coolant pressure: 7 bar • Coolant flow rate: 50 l/min • Internal coolant supply: 30 bar • High-pressure coolant: 120 bar (front and rear machining station) • Coolant filter: Knoll VRF 150/750 vacuum rotary filter • Suitable filter materials: Aluminum, plastic, brass, steel • Wash gun: Yes • Connected load: 22 kW • Maximum bar length: 3 m • Maximum bar diameter: 36 mm • Operating voltage: 400 V, 3~, 50 Hz • Control voltage: 24 V AC • Valve voltage: 24 V DC • Clutch voltage: 24 V DC • Total installed power: 33 kW • Total rated current: 60 A OPTIONAL ADDITIONAL EQUIPMENT Hjdsza Ucxspfx Adrefh • FMB turbo 5-42 XT / 3200 “C” bar feeder • Bar feeder year of manufacture: 2003 • Hinged belt chip conveyor • Chip conveyor discharge height: 950 mm • Guide tubes D25, D36 • Live workpiece stop, shank 16 × 16 mm • Brankamp CMS 100 collision monitoring Technical Specification Through-spindle coolant: Yes Counter spindle: Yes Driven tools: Yes

Stanje: pripravljen za uporabo (rabljen), Traub 700 734 VEMEM/I vmesna plošča, rabljena, v dobrem stanju, 100% delujoča, dobava skladno s fotografijami. Hfedpfex Eu Tvjx Adroh

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm Control system: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3150 rpm / 2-step Feed rate: 10,000 mm/min Tool turret - number of stations: 8 Operating hours: 8,834 h Tailstock taper: SK30 DIN 2080 Tailstock quill travel: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions (LxWxH): approx. 1.8 x 3.3 x 1.8 m Hydraulic unit dimensions: 580 x 400 x 750 mm Hfodpfx Aeu Rqabjdrjh Equipment: Ø 200 mm hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Precision adjustment device for tool setting

Stanje: rabljeno, Leto izdelave: 1993, Tehnične podrobnosti: x-pomik: 400 mm y-pomik: 300 mm z-pomik: 400 mm Vrtljaji vretena: 8000 vrt/min Krmiljenje: Fanuc OM Vpenjalna miza: 500x300 mm Število mest v magazinu: 16 kosov Vpenjalo orodja: SK40 Razdalja delovno vreteno/vpenjalna površina maks.: 50-450 mm Število palet: 2 kosa Skupna potrebna moč: 10 kW Teža stroja pribl.: 2,5 t Mere stroja pribl. D x Š x V: 2,4x1,8x2,5 m Hjdsu Idn Hjpfx Adrjfh Transportne mere stroja: 2,45x1,8x2,5 m - Električna omarica - Hladilna naprava - Transporter za ostružke proizvajalca META (transportna višina 1500 mm; širina 200 mm) Funkcija menjave mize ni v delovanju.

Stanje: rabljeno, CNC Lathe TRAUB Type TND 400 Serial No. 708 Year of manufacture: 1996 CNC Control: TRAUB TX 8 F Nominal turning diameter: 400 mm Swing diameter over bed max. 470 mm Spindle bore in draw tube: 65 mm Spindle drive motor output: 22 kW Total power requirement: 35 kW Electrical connection: 380 Volt, 50 Hz - Electronic handwheel - RS 232 data interface - Disc turret with 12 tool stations VDI 40 - Including 8 VDI 40 tool holders - 3-jaw power chuck Ø 225 mm SMW Autoblok, type KNCS-N-Ø 225-65 Including a large assortment of chuck jaws - Hydraulic hollow clamping cylinder SMW, type ZHDAS-130-67 - Chip conveyor KNOLL, type 200 S-1/600 - Coolant system - Hydraulic unit freestanding (L x W x H: 650 x 500 x 1000 mm) Space requirement (L x W x H): 4800 x 2000 x 2100 mm Space requirement main machine (L x W x H): 3500 x 2000 x 2100 mm Space requirement chip conveyor (L x W x H): 4500 x 700 x 1550 mm Hsdpfezacwdjx Adrsfh Weight approx. 5 tons Good condition Machine ready for demonstration. Hollow clamping cylinder for workpiece clamping needs to be repaired.

Leto izdelave: 1993, stanje: rabljeno, številka stroja/vozila: 156, CNC krmiljenje Traub System TX8 F, z 1 revolverjem s 6 mesti za orodja in 1 revolverjem s 6 mesti za orodja, gnana orodja, prehod palice 30 mm, z enoto za filtracijo s filcem, hladilno napravo in samodežnim zalogovnikom za nalaganje palic. Hfodpfx Adjy Sqkworjh

Stanje: rabljeno, Leto izdelave: 1992, številka stroja/vozila: 690, CNC krmiljenje Traub System TX8 D, z 1 revolverjem z 14 mesti za orodja in 1 revolverjem z 9 mesti za orodja, gnana orodja, maksimalna dolžina struženja cca 1000 mm, prehod palice 80 mm, moč 73 kW, z filtrom iz vlies materiala in transporterjem za ostružke. Hfjdpsy Sqimefx Adreh

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 18 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.0 / 5.5 kW - Minimum C-axis resolution: 0.001° - Z-axis travel: 205 mm SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 1.5 / 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turret heads: 2 UPPER TURRET - Number of positions: 8 - Number of driven positions: 8 - Driven tool speed: 12,000 rpm - Driven tool power: 1 / 2 kW - Travel X/Z: 165 / 550 mm - Travel Y: -40 / +25 mm - Rapid traverse rate (X/Y/Z): 21 / 21 / 42 m/min - B-axis stroke: 100° LOWER TURRET - Number of positions: 7 - Number of driven positions: 7 - Driven tool speed: 12,000 rpm - Driven tool power: 1.5 / 2.5 kW - Travel X/Z: 120 / 250 mm - Travel Y: -20 / +40 mm - Rapid traverse rate (X/Y/Z): 21 / 21 / 50 mm/min SUBSEQUENT MACHINING - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 10,000 rpm - Driven tool power: 1 / 2 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 24 kVA WEIGHT AND DIMENSIONS - Floor space required: 3,060 x 1,480 mm - Machine height: 2,420 mm - Machine weight: 4,300 kg MACHINE HOURS - Operating hours: 14,998 h - Spindle hours: 11,177 h ACCESSORIES - Control: Traub TX 8i-s - Driven guide bushing - Parts removal - Parts conveyor belt - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar feeder: IEMCA ELITE 220 / 32 XL Hedpozbvnljfx Adrsfh - Oil mist extraction: ELBARON RON/A 1500 DH - Fire extinguishing system * * NB: Functionality not guaranteed. Must be inspected by a qualified company on behalf of the buyer.

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis Hjdpfx Adowp D Nbjrofh 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: rabljeno, Leto izdelave: 1990, Tehnične podrobnosti: Premer struženja: 445 mm Dolžina struženja: 2000 mm Premer struženja nad posteljnim suportom: 660 mm Vretenska izvrtina: 65 mm Vretenaste hitrosti: 16 - 3150 min⁻¹ Hitri pomik v smeri x: 10 mm/min Hitri pomik v osi Z: 15 m/min Skupna potrebna moč: 34 kW Teža stroja cca.: 7,5 t Prostorska zahteva cca.: 6 x 2,5 x 2,2 m z CNC krmiljem TX 8 D Hfedpfew I R Ndjx Adreh C-os, pogonska orodja Revolverska glava s 14 pozicijami 3-čeljustna vpenjalna glava Ø 315 mm Konjiček, luneta SMW SLK 520 N kot NC-os različni pogonski nosilci orodij različni nosilci stružnih orodij Odvajač ostružkov in hladilna naprava

Stanje: dober (rabljeno), Leto izdelave: 1996, CNC Turning Center TRAUB Type: TNC65 DG Year of manufacture: 1996 Control: TRAUB TX8F Hfedpfx Asu Eug Ijdroh Includes extensive accessories.

Stanje: dober (rabljeno), Leto izdelave: 2003, CNC Turning Automation TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit), 10.4" flat display Additional V24 RS232 port in control cabinet MDE interface in control cabinet (machine running, piece counter) Tool monitoring for threading without compensating chuck Main spindle: spindle bore 36 mm, max. speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Hainbuch quick-change base body with installation aid Hainbuch manual quick-change device Sub-spindle: Hfjdpfx Aezaud Asdrjh Sub-spindle as motorized spindle with C-axis System for sub-spindle clamping pressure, part ejector, Axfix chuck Hainbuch Top tool turret with driven tools, electronic gearbox X3 cross slide for front attachment, 5-position front attachment Driven tools Face-side cut-off machining station with driven tools Workpiece removal unit: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Cooling/lubrication system: Tank 230 l / 7 bar / 50 l/min Internal coolant supply 30 bar High pressure 120 bar at front and rear machining station Vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Rinsing gun Hinged belt chip conveyor, discharge height 950 mm Preparation for mounting bar loader (guide tube D25, D36) Steady rest stop (shank 16x16) Collision monitoring Brankamp CMS 100 on main and sub-spindle Machine with no known defects,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 87.094 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 140 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 18.500 W, skupna višina: 1.917 mm, skupna širina: 2.076 mm, skupna masa: 5.200 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i, največja dolžina izdelka: 4.354 mm, število mest v zalogovniku orodij: 10, število osi: 7, Ta 7-osna stružnica TRAUB TNC 65 DGY je bila izdelana leta 2009. Opremljena je z zmogljivim revolverjem z največjo hitrostjo 4000 min⁻¹ ter visokotlačnim hladilnim sistemom s programirljivimi stopnjami tlaka. Stroj je zasnovan za obdelavo kovin in plastike ter opremljen z osjo C za numerično krmiljeno struženje in pozicioniranje. Če iščete kakovostno stružnico, razmislite o nakupu horizontalne stružnice TRAUB TNC 65 DGY, ki jo ponujamo v prodajo. Za več informacij nas kontaktirajte. Hfodpfx Adsy Sg Nijrsh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 116.688 h, največja hitrost vretena: 5.600 obr/min, potovalna razdalja osi X: 375 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 11.000 W, skupna višina: 1.800 mm, skupna masa: 3.500 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8H, največja dolžina izdelka: 2.700 mm, število osi: 3, This 3-axis horizontal lathe, TRAUB TNA 300, was manufactured in the year 2000. It features a spindle bore of 65 mm and is equipped with a high-pressure coolant system, driven tools with a power output of 4 kW, and an automatic bar change system. The machine comes with a chip conveyor and tool monitoring systems to enhance efficiency. If you're looking for a high-quality lathe, you should consider the TRAUB TNA 300 we have for sale. Contact us for further details. • Spindle bore/machine power: 65 mm • Capacity of the installed 185E collet system: max. 60 mm clamping diameter Hodpfx Adoy Sg Dgerofh • Machine design: without tailstock • Basic equipment: included • Hydraulic hollow clamping cylinder: included • High-pressure coolant system: 12 bar / 3 bar • Control: TX8H, 32-bit technology; latest-generation processor (at the time of manufacture); parameter data on diskette • Axes/functions: • C-axis: included (numerically controlled spindle positioning and rotary axis) • Y-axis: not included • Driven tools: included; power 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive switch-off at end of material: selectable via parameter • Fault message via parameter: selectable • Guideway covers: included • Workpiece clamping: • Collet system: ROHM • Collet system compatibility: • DIN 6343 Size 48, max. diameter 42 mm • Rubberflex Series 52 compatible • Rubberflex Series 36 compatible • Fahrion Collet FM 1149 MB compatible • Fahrion Collet FM 1148 MB compatible • Electrical: • Electrical system according to: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Auxiliary voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: Industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional Equipment • Chip conveyor: included • Workpiece removal device: included; via conveyor, left-hand side ejection • Bar loader preparation: included • Bar loader magazine: TRAUB DNH 61-3000 (automatic) • Loading: telescopic shuttle system • Bar shapes: round / hexagonal / square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included • Remnant removal: forward • Central adjustment of bar diameter: included • Stepless adjustment of feed force: included • Central magazine adjustment: included • No guide channel change required • No collet change required • Short remnants possible • Transverse feed system • Transport weight: approx. 2100 kg Technical Specification Counter spindle: No Driven tools: Yes

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Tool monitoring, thread cutting without compensation chuck, main spindle: spindle bore: 36mm, max. speed: 6300 rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch interchangeable parts, installation aid for base body, manual Hainbuch change device, sub-spindle: sub-spindle as motor spindle, C-axis, device for counter pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool turret, driven tools, electronic gearbox, X3 cross-slide for front unit, front unit 5-station and parting-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece removal device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel), rinse gun, connected load: 33kW, control: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in control cabinet, operating hours: 124,705h, with bar loader FMB TURBO 5-42XT/3200/C, chip conveyor, coolant system, and basic set of stationary and driven tool holders. On-site inspection possible. Hfjdpfxey U Nq Ij Adreh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 124.009 h, število osi: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, two tool turrets with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant purification system and a hinged belt conveyor for efficient chip removal. If you are looking for a high-quality lathe, consider the TRAUB TNC65 DG horizontal lathe we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis on main spindle: Yes • C-axis on counter spindle: Yes • V-axis: Yes (programmable position) • Tool turrets: 2 (turret I and II) • Driven tools on turret I: Yes • Driven tools on turret II: Yes • Number of tool stations: 10 per turret Hfjdpoy R Uvusfx Adreh • Thread cutting: Without compensation chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant equipment: Purification system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply integrated for both turrets • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Compatible with water-based coolant Additional Equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (including preparation) • Workpiece ejector: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max. clamping diameter 60 mm Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Swiss-Type Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2009 TECHNICAL SPECIFICATIONS Headstock - Max. bar diameter (mm): 12.7 - Quality of round stock (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Slide travel X1 (mm): 35 - Slide travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Slide travel X2 (mm): 35 - Slide travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven tools for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (number): 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear Slide Dragged / Fixed - Z-stroke dragged with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (number): 3 Rear Slide (X4-axis) - Stroke X4 (mm): 39 - Rapid traverse speed (m/min): 15 Hjdpjy N A S Usfx Adrsfh - Tool holder diameter (mm): 28 - Tool stations (number): 4 Driven tools for rear slide (with X4 axis) - Max. speed (rpm): 10,000 - Driven tools max. (number): 4 - Clamping diameter for drilling tools - driven (mm): 0.5–7 - non-driven (mm): 0.5–10 Coolant System - Pump pressure single stage (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - Bar feeder FMB Minimag 18 - High pressure system - Fire extinguishing system Subject to changes and errors in the technical data and specifications.

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, CNC Sliding Head Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2007 TECHNICAL DATA Spindle Head - Max. bar diameter (mm): 12.7 - Bar stock tolerance (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / spindle stroke - With fixed guide bushing (mm): 130 - With rotating guide bushing (mm): 80 - With programmable guide bushing (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Slide travel X1 (mm): 35 - Slide travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1/Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Slide travel X2 (mm): 35 - Slide travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Hfodpfx Asy N A Atodroh Tool drive for tool carriers 1 and 2 - Max. speed (rpm): 8,000 - Number of tool stations: 2xG - Clamping diameter for boring tools (mm): 0.5-7 Sub-spindle / Front unit - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24/Xg (mm): 140 / 228 - Rapid traverse 23,24/X3 (m/min): 30 - Number of tool stations: 4 - Max. speed (rpm): 12,000 - C-axis resolution (GSP) (degrees): 0.001 Back-working attachment, gang-type / fixed - Z stroke (mm), gang-type with working spindle: 80 - Tool holder diameter (mm): 20 - Number of tool stations: 3 Back-working attachment (X4 axis) - X4 stroke (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Number of tool stations: 4 Tool drive for back-working attachment (with X4 axis) - Max. speed (rpm): 10,000 - Number of driven tools: 4 - Clamping diameter for boring tools - Driven (mm): 0.5 - 7 - Non-driven (mm): 0.5 - 10 Coolant System - Single stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High pressure coolant system - Fire extinguishing system Subject to changes or errors in technical specifications or details.

Stanje: rabljeno, Leto izdelave: 2022, Turning diameter over bed: 254 mm Spindle bore: 20 mm Turning length: 120 mm Control: TX8i-s Total power requirement: 40 kW Machine weight approx.: 5 t Swiss-type automatic lathe TRAUB TNL 20 - 9 Year of manufacture: 2022 Control: TX8i-s (with Polyform / Helical / 19" multitouch with gesture control) Switchable operation: use as short or long turning machine Main spindle D20 (with 10,000 rpm) with C-axis Sub-spindle D20 with X/Z/C-axis Upper tool carrier X/Y/Z/H/B-axis with 8 tool stations Lower tool carrier X/Y/Z/H-axis with 8 tool stations Back working attachment with 4 tool positions Coolant mist extraction and filtration system Automatic CO2 extinguishing system Precision package Tool breakage detection (upper tool carrier) Tool breakage detection (lower tool carrier) Hinged belt chip conveyor Coolant system with 20 to 80 bar pump Bar feeder FMB Turbo 2-20 Shifting device for bar feeder Portal workpiece removal unit Workpiece conveyor belt Linear axes 1) X1 Upper turret 2) V1 Upper turret 3) X2 Lower turret 4) Z2 Lower turret 5) Z1 Sub-spindle 6) X4 Backworking unit 7) Z4 Backworking unit Rotary axes 8) C1 Sub-spindle 9) C2 Main spindle Swivel axes 10) B Upper turret carrier 11) H1 Upper turret 12) H2 Lower turret Workpiece removal unit 13) Z5 Lateral movement 14) X5 Rotary movement Max. bar capacity mm: 20 Max. Z travel long/short turning mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% ED kW: 3.0 / 5.5 Torque 100%/40% ED Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations quantity: 8 Driven tools quantity: 8 Max. speed rpm: 12,000 / 8,000 Holder diameter mm: 45 Drive power 100%/40% ED kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X / Y / Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret Tool stations quantity: 8 Hfedpoy Nfdtofx Adreh Driven tools quantity: 8 Max. speed rpm: 12,000 Holder diameter mm: 45 Drive power 100%/40% ED kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X / Y / Z m/min: 20 / 20 / 40 Backworking attachment Tool stations quantity: 4 Slide travel X / Y / Z mm: 120 / ±25.4 / 155 Holder diameter mm: 25 Sub-spindle Max. spindle bore mm: 20 Max. speed rpm: 10,000 Drive power 100%/40% ED kW: 3.0 / 5.5 Torque 100%/40% ED Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X / Z m/min: 20 / 40 Coolant system basic unit Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration fineness μm: 200

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units Hodpfxst E Dbye Adrjfh - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, krivinsko krmiljen avtomatski stružni stroj vključno z zalogovnikom Hjdpfoy R Tqqox Adrefh - proizvajalec PMT (Traub India) - največji premer palic 25 mm - konjiček - 2 navpična nosilca orodij - 2 vodoravna nosilca orodij - teža ca. 650 kg - mere (D x Š x V) ca. 1000 x 600 x 1500 mm - zalogovnik za palice IEMCA AS 325/62 (največja dolžina palic 6.200 mm)

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, krivinsko krmiljen avtomatski stružni stroj vključno z zalogovnikom - proizvajalec PMT (Traub India) - največji premer palic 25 mm - konjiček - 2 navpična nosilca orodij - 2 vodoravna nosilca orodij - teža ca. 650 kg - mere (D x Š x V) ca. 1000 x 600 x 1500 mm Hjdpfjy R Tm Sox Adrefh - zalogovnik za palice IEMCA AS 325/62 (največja dolžina palic 6.200 mm)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, krmiljeno krivinsko stružno avtomat vključno z dodajalnim magazinom - maks. premer palice 25 mm - konjiček - 2 navpična nosilca orodij - 2 vodoravna nosilca orodij - teža pribl. 650 kg Hfedpfx Ajy R Tg Ssdroh - dimenzije (DxŠxV) pribl. 1000 x 600 x 1500 mm - podajalnik palic IEMCA AS 325/62 (maks. dolžina palice 6.200 mm)