Traub Tnd 360 nakup rabljenega (81)

Leto izdelave: 1982, stanje: pripravljen za uporabo (rabljen), Na voljo je splošni CNC stružni stroj s poševnim ležiščem Traub. Število orodnih mest: 12, orodna glava: VDI40, premer struženja: 180 mm, največji premer obrata: 450 mm, največja dolžina struženja: 490 mm, premer prehoda palice: 60 mm, pomik X/Z: 160 mm/490 mm, hitri pomik: 15 m/min, delovni pomik: 10 m/min, dimenzije stroja X/Y/Z: pribl. 3100 mm/2000 mm/1800 mm, teža: pribl. 4250 kg, krmiljenje: Traub System TX-8. Možen je ogled na lokaciji. Bsdey I Adbspfx Aa Rowp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: popolnoma funkcionalen, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, Oprema: podajalnik palic, transportni trak za ostružke, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the machine within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Maximum counter-spindle speed: 4,000 rpm Maximum workpiece diameter: 56 mm Rapid traverse: up to 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece discharge via counter-spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 minutes Counter-spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 minutes Tool Turrets 1 & 2 Driven tools per turret: 10 (14) Maximum speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Tool holder bays/turret: 10 (14) Cylindrical shank according to DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time (as per VDI 2852): 1.2 s Station change time: 0.6 s Across 5 stations: 1.5 s Counter-spindle (numerically controlled in Z-direction) Maximum speed: 4,000 rpm Maximum clamping diameter: 65 mm Continuously programmable three-phase motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Bsdjym A E Iepfx Aa Rswp Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Nominal pressure current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator’s position: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant/Lubrication Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read-off operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chuck system Two 10-position tool turrets with driven tool stations Counter-spindle External reference: L. Schaible

Stanje: rabljeno, Leto izdelave: 1996, maks. premer palice: 65 mm maks. premer vrtenja: 175 mm maks. dolžina palice: 3.000 mm Krmiljenje: sistem TX 8F Hod – x: 140 mm Hod – z: 520 mm CNC stružnica | TRAUB - TNC 42/65 DG, opremljena z nalagalnikom palic. Stroj je v dobro vzdrževanem stanju. Bwsdpoxbtq Njfx Aa Rsp Videoposnetke stroja na lokaciji z veseljem posredujemo na zahtevo. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 19.441 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6000816, stružna dolžina: 50 mm, največja hitrost vretena: 12.000 obr/min, prehod palice: 12 mm, model krmilnika: Mitsubishi TX-8i, največja hitrost protivretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Bedpfsx Hxv Dsx Aa Rewp Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet, max. configuration: 2,000 kg Weight without control cabinet, max. configuration: 1,600 kg Weight with control cabinet, min. configuration: 1,200 kg Weight without control cabinet, min. configuration: 850 kg Operating Hours Control power-on hours: 19,441 h Automatic hours 1: 7,607 h Automatic hours 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanically prepared interface Various fixed holders Rinsing pistol

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Opis sledi Bwjdpfx Aox A Hdfsa Rsp

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 43.000 h, Funkcionalnost: popolnoma funkcionalen, moč vretenovega motorja: 3.700 W, največja hitrost vretena: 10.000 obr/min, skupna masa: 5.000 kg, skupna širina: 1.500 mm, skupna dolžina: 4.000 mm, skupna višina: 2.400 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 40 m/min, moč: 24 kW (32,63 KM), pomik po osi Z: 205 mm, Oprema: dokumentacija / priročnik, Nudimo naprodaj enega izmed naših strojev, ki ga izločamo kot del načrtovane obnove našega strojeparka. Stroj je TRAUB TNL 18P stružnica z drsnim vretenom, letnik 2013, ki je v dobrem tehničnem stanju. Razlog za prodajo je nabava nove tehnologije v okviru nadgradnje strojeparka. Trenutne delovne ure znašajo 43.000. Ponudba vključuje tudi podajalnik palic FMB Minimag 20/3200, ki zagotavlja nemoteno in učinkovito dovajanje materiala v stroj. V okviru dobave lahko zagotovimo tudi notranjo opremo, vključno z vodili in vpenjalnimi vložki za glavno vreteno, protivreteno in podajalnik palic, primerno za materiale do premera 12 mm. Za več informacij me prosim kontaktirajte. Bsdpfx Ajxdk Ukja Rswp

Stanje: rabljeno, Leto izdelave: 2005, Premer struženja 5-42 mm Dolžina struženja 3200 mm Krmiljenje Traub TX8i X-os 50 mm Z-os 50 mm Bodpfey Nd U Dex Aa Rswp Teža stroja pribl. 4000 kg 21817 ur

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 55.000 h, največja hitrost vretena: 8.000 obr/min, skupna masa: 7.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i-s, število osi: 7, This 7-axis TRAUB TNL 32-7 horizontal lathe was manufactured in 2013. It is ideal for precision turning operations and offers robust performance and reliability. Take advantage of the opportunity to purchase this TRAUB TNL 32-7 horizontal lathe. Contact us for more information. Additional Equipment • Coolant pump 3 bar / Coolant pump 8 bar • Chip conveyor, hinge belt type H = 1000 mm • Length measuring system X-axis for upper/lower turret • Fabric filtration for coolant: filtration grade approx. 30–40 µm • High-pressure coolant pump 20 bar • CO2 fire extinguishing system Kraft & Bauer Machine Advantages Technical machine advantages • Maximum bar diameter: 32 mm • Spindle stroke: 305 mm Bedpfx Aajyrd H Dj Rjwp • Automatic bar feeder: fmb lsk38-3200, max. bar length 3200 mm • Upper turret: x/y/z/h-axis, 10 tools, double drive • Lower turret: x/y/z/h-axis, 9 tools, same drive; counter spindle with independent drive • Conveyor belt for finished parts with gripper • Machine operated exclusively with cutting oil

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 8.000 obr/min, število osi: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control unit with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle offers a 32-mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It includes an upper tool turret with double drive and a lower turret with nine tool holders. Consider the opportunity to purchase this TRAUB TNL 32 Swiss-type lathe. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; TFT color flat screen; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), thread cutting without compensating chuck, part-off tool breakage monitoring, part-off tool ejection monitoring, axis disabling, T-ATC • Main spindle: motor spindle with hollow clamping system; 32 mm bar/drill capacity; C-axis max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; double drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter spindle operation • Measurement/feedback: glass scales on X axes (upper and lower turret); encoder on C axis • Backworking: 8-position rear station with combined drive for up to 3 tools; ready for internal coolant feed • Clamping: clamping direction reversal device and counter clamping pressure unit on main and counter spindle • Coolant system: standard unit with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), flow rate 19 l/min • Extraction: D 150 mm connection for central extraction system Bodpfx Aajx D Drcs Rjwp Additional equipment • None specified (no robots, bar feeders, chip conveyors, or external automation listed)

Stanje: zelo dobro (rabljeno), CNC machine Traub TNL 26 Bodpfxehlp Sdo Aa Rswp Condition: used, well maintained Sale without any warranty

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, TRAUB suha kamnoseška žaga MULTI-STONE 520 — letnik 2022 Rabljeno, iz profesionalne najemne flote podjetja Kurt König Baumaschinen GmbH, Einbeck. Stanje in opombe: - Stanje: Rabljeno iz najema, redno servisirano - Funkcija: Popolnoma delujoča - Slike izdelka sledijo — v primeru zanimanja nas kontaktirajte za aktualne fotografije - Ogled možen po dogovoru v 37574 Einbeck Cena: 3.750 EUR + DDV | EXW Einbeck | Dostava na zahtevo Bwedpfx Aaey A E Nij Rop

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, automatic lathe Traub Bwjdpfx Aaewcqv Io Rjp

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Bjdsw E Nnbepfx Aa Rowp Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Stanje: dober (rabljeno), Odmikač brusilnih plošč, odmikač lončastih plošč, odmikač za dvostranski brusilnik, odmikač za ploščinsko brusilko, odmikač za cilindrično brusilko, glava za oblačenje, glava za uravnavanje za brusilne stroje Bwsdpfxed R Ikdj Aa Rsp - Količina: 1 kos na voljo - Dimenzije: 325/130/V135 mm - Teža: 7,3 kg

Stanje: dober (rabljeno), Leto izdelave: 2001, TNK 36 letnik 2001 vključuje transporter ostružkov, filtrirni sistem Resy Bwjdpfexv Sr Ijx Aa Rsp v dobrem stanju, obratoval brez polnilnika, ni priključen na elektriko

Stanje: rabljeno, Leto izdelave: 2008, Premer struženja 12,7 mm Dolžina struženja 50 mm Krmiljenje Traub System TX 8i Število vrtljajev 12.000 vrt/min C-os 0,001° Postaja za prijem 12,7 mm Število vrtljajev 12.000 vrt/min Hitri pomik 15 m/min Revolver glava (x-krat) 6 Bedpfx Asygm R Isa Rewp Sistemi orodij 5+3 Sistemi orodij 3 orodja sistemi Skupna priključna moč 2,5/4 kW Teža stroja pribl. 2 t Potreben prostor pribl. 2,4 x 1,1 x 1,7 m CNC kratkostrugalni stroj Traub TNL 12K z avtomatskim podajalcem LNS Tryton 112 Pogon S8 (hrbtna obdelava z gnanimi orodji) prisoten Pogon S7 (sprednja obdelava z gnanimi orodji) prisoten

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 8.300 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 6.400 obr/min, Premer palice (maks.): 32 mm, model krmilnika: TX 8 i-p, dolžina obdelovanca (maks.): 245 mm, DÉTAILS TECHNIQUES Broche principale Passage maximum de barre : 32 mm Longueur maximale de pièce (usinage longitudinal) : 245 mm Longueur maximale de pièce (usinage court) : 125 mm Vitesse maximale de broche : 6.400 tr/min Contre-broche Passage maximum de barre : 32 mm Profondeur de serrage max. de la pièce : 250 mm Vitesse maximale de broche : 6.000 tr/min Tourelle supérieure Nombre de stations : 10 Toutes motorisées Vitesse maximale : 12.000 tr/min Tourelle inférieure Nombre de stations : 9 Toutes motorisées Vitesse maximale : 12.000 tr/min Unité arrière Nombre de stations : 8 Stations motorisées : 3 (T12, T13 et T14) Vitesse T12 & T14 : 12.000 tr/min Vitesse T13 : 4.000 tr/min DÉTAILS DE LA MACHINE Heures broche : 8.300 heures Commande : TX 8 i-p Bwjdpfx Aasyn Imys Rjp ÉQUIPEMENT Convoyeur de pièces Convoyeur de copeaux Pompe arrosage 20 bars Filtre à brouillard d'huile IFS Chargeur de barres FMB turbo 3-36

Leto izdelave: 1997, obratovalne ure: 54.646 h, stanje: rabljeno, Traub TNA500 SN 253 Vreteno 2800 obr/min Bedpfx Aoyt Slwea Rjwp 12-pozicijski revolverski nosilec orodij Ima gnana orodja Moč 46 kVA

Stanje: dober (rabljeno), Leto izdelave: 1994, TRAUB TNS 65 D / 5-osni CNC stružno-rezkalni center - Krmiljenje TX8 D - Popolni tehnični podatki na slikah - Leto izdelave: 1994 - Podajalnik Hydrobar - Razni gnani držala za orodje - Držala za orodje - Trizverčnična glava Bwedeyc Nnzepfx Aa Rjp - Popolna dokumentacija Pridržujemo si pravico do napak in sprememb.

Stanje: rabljeno, Leto izdelave: 1987, obratovalne ure: 80.678 h, Funkcionalnost: popolnoma funkcionalen, Opis sledi Bodpfx Aaox A Hl As Rewp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 364, model krmilnika: Traub TX8F, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control unit: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Sub spindle 2 turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Bwsdpfjw Ec Aljx Aa Rsp Chip conveyor

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Bsdpfx Ajv Scrhja Rowp

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), Prehod vretena: 42mm, maks. premer obdelovanca: 115mm, število vrtljajev: 3150 min⁻¹, moč: 9kW, dolžina palice: 5200mm. Dimenzije stroja X/Y: pribl. 2100mm/1000mm, teža: pribl. 1500kg. Vključno s podajalnikom palic Stamag D 5000 in različnim priborom, kot so vpenjalne in podajalne čeljusti. Dokumentacija je na voljo. Možen ogled na lokaciji. Bwedpfoxwn Ihox Aa Rjp

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Bsdpfxjv Scrbo Aa Rowp

Leto izdelave: 2005, stanje: dober (rabljeno), 7 Driven Tool Holders suitable for CNC Lathe Manufacturer: TRAUB TNA 480 Tool Mount Size: VDI 40. Compatible with SAUTER tool turret with VDI 40 interface. Bedpfx Aashwnfkj Rjwp 7 Horizontal units No. 3/4/5/6/7/8/9 for drilling and milling; price per unit: €550 2 Horizontal units No. 1 and No. 2 for thread tapping; price per unit: €600 1 NC drill chuck VDI 40, clamping range 1–13 mm; price: €100 1 NC drill chuck VDI 40, clamping range 2.5–16 mm; price: €150