Traub Tnd 360 nakup rabljenega (108)

Stanje: dober (rabljeno), Notranja št. artikla: 25091 Pogonski nosilec orodja Gkedsxvaqlopfx Ab Tef Nastavljiva kotna glava Index / Traub Št.: W 7045011A Zelo dobro ohranjen! Nosilec je bil uporabljen na stroju Traub TNL18.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, V okviru stečajnega postopka ponujamo: 2 x CNC stružnica (1 x protivreteno (1 x spodnji revolver)), rabljena + podajalnik palic + dodatna oprema 1. CNC stružnica s protivretenom Proizvajalec: MIYANO Tip: BNC 34-S Godpfx Ajx Ed A Dob Tekf Leto izdelave: 1989 Krmiljenje: Fanuc 0-T - Podajalnik palic HYDROBAR - 2 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 2. CNC stružnica z 2 x revolverjem Proizvajalec: MIYANO Tip: JNC 45-T Leto izdelave: 1989 Krmiljenje: Fanuc 0-T Podajalnik palic HYDROBAR - 1 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 3. Dodatna oprema - Približno 65 x napenjalna tule - Približno 40 x komplet čeljusti - Različni nosilci orodij + orodja - Dokumentacija Stroji niso testirani, vendar so bili uporabljeni do konca. Prodaja iz lokacije, nakladanje možno za doplačilo.

Stanje: dober (rabljeno), Leto izdelave: 2004, TRAUB TX8H CONTROL Weight: 3500 kg Dimensions (LxWxH): 3960 x 1640 x 1800 mm Power: 11 kW Spindle Speed: 5600 / 4000 rpm Gksdpfx Ajwwl Iusb Tjf Torque: 200 / 280 Nm The TRAUB TNA 300 lathe is designed for machining workpieces with a turning length of up to 450 mm. --> Suitable for chip-forming metal and plastic machining with defined cutting edges using appropriate tools. --> For clamping in jaw chucks from size 160 up to approx. 250. --> For machining bar stock up to a diameter of 42 or 65 mm, respectively. --> With special EHS version workpiece removal unit --> Chip conveyor extended by 800 mm --> Technical Data Working Area Spindle bore: 42 mm --> Spindle head DIN 55026, size: A5 --> Chuck diameter: 160-175 mm / 200-250 mm --> Max. turning diameter: 275 mm --> Clearance above spindle center: 35 mm --> Max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool Carrier Tool holders for cylindrical shank DIN 60880: 12 pcs --> Shank diameter: 30 mm --> Tool cross-section: 20x20 mm --> Indexing time, 1st position: 0.5 sec. --> Indexing time, each subsequent position: 0.15 sec. --> Feed Drives X-Axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> Rapid traverse/Path speed: 15 m/min --> Z-Axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 18 m/min --> Y-Axis: --> Slide travel: ±35 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 10 m/min --> C-Axis: --> Speed: 100 rpm --> Torque: 140 / 196 Nm --> Electronic resolution: 0.001 degree --> Tailstock Quill diameter: 70 mm --> Quill stroke: 60 mm --> Rapid retraction travel: 280 mm --> Quill clamping force at 55 bar: 8600 N --> Mounting per DIN 228: Mk 4 --> Steady Rest Clamping range: 8 - 95 mm --> Parts Removal Device Max. part length: 250 mm --> Max. part weight: 3 kg

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Gjdpfxow E Nnbs Ab Tokf Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Stanje: dober (rabljeno), Leto izdelave: 2004, Traub TNA 400 Y, letnik 2004, krmiljenje TX 8 H, pomik X/Z 285/750 mm, pomik Y osi +/-50 mm, os C 0,001°, os V – programabilna konica, hitrost vretena do 3.150 vrt./min, revolverska glava 12 položajna, gnana orodja, VDI 40 vpenjalo, 4360 ur vretena, stroj iz prototipne proizvodnje, ATC merilna optika, veliko dodatne opreme. Gjdpexyyn Eefx Ab Tekf

Stanje: rabljeno, Leto izdelave: 1987, obratovalne ure: 80.678 h, Funkcionalnost: popolnoma funkcionalen, Opis sledi Gjdpjx A Hl Aefx Ab Tjkf

Stanje: dober (rabljeno), Interna št. artikla: 25088 Nosilec orodja Nosilec za navojno vrtinčenje vklj. z rezilnimi ploščicami Index / Traub Št.: 12068219 Gjdpfx Aboxu Dcve Tskf Orodje je bilo v uporabi na stroju Traub TNL18 Zelo dobro ohranjen!

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, V okviru stečajnega postopka ponujamo: 2 x CNC stružnica (1 x protivreteno (1 x spodnji revolver)), rabljena + podajalnik palic + dodatna oprema 1. CNC stružnica s protivretenom Proizvajalec: MIYANO Tip: BNC 34-S Leto izdelave: 1989 Krmiljenje: Fanuc 0-T - Podajalnik palic HYDROBAR - 2 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 2. CNC stružnica z 2 x revolverjem Proizvajalec: MIYANO Tip: JNC 45-T Leto izdelave: 1989 Krmiljenje: Fanuc 0-T Podajalnik palic HYDROBAR Gedpfxex Edz To Ab Tekf - 1 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 3. Dodatna oprema - Približno 65 x napenjalna tule - Približno 40 x komplet čeljusti - Različni nosilci orodij + orodja - Dokumentacija Stroji niso testirani, vendar so bili uporabljeni do konca. Prodaja iz lokacije, nakladanje možno za doplačilo.

Stanje: dober (rabljeno), Leto izdelave: 2001, TNK 36 letnik 2001 Gkodpexv Sr Isfx Ab Tsf vključuje transporter ostružkov, filtrirni sistem Resy v dobrem stanju, obratoval brez polnilnika, ni priključen na elektriko

Stanje: rabljeno, Leto izdelave: 2001, Drehdurchmesser 340 mm Drehlänge 750 mm Steuerung SYSTEM TX 8H Spindeldurchlass 80 mm Umlaufdurchmesser über Planschlitten 530 mm Umlaufdurchmesser über Bett 665 mm Drehzahlbereich - Hauptspindel 3.150 min/-1 Antriebsleistung - Hauptspindel 22 kW Anzahl der Werkzeugplätze 12 Pos. Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Gkodpexwdw Ejfx Ab Tof Es sind 2 Maschinen verfügbar. Preis pro Stück. Maschine 1: - Bilder 1-5 - Betriebsstunden ca.55.790 h Maschine 2: - Bilder 6-10 - Betriebsstunden ca.54.347 h Technische Merkmale & Zubehör: - Y Achse - Zubehörpaket mit starren und angetriebenen Werkzeughaltern -Späneförderer Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 18770, model krmilnika: TX 8F, premer vpenjanja: 65 mm, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Driven tool system Max. speed of driven tool: 4,000 rpm Driven tool power at 100% duty cycle: 1.5 kW Driven tool power at 15% duty cycle: 4 kW Driven tool torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s X/Z input and output resolution: 0.001 mm C-axis input and output resolution: 0.001° Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 minutes Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Speed override: 50 – 120% MACHINE DETAILS CNC Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated power current: 85 A Connection: 54 kW Power consumption: 39 kW Gjdpfx Absxpgl Aj Tskf Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% Hydraulic system pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M commands: 3 digits B commands: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with powered tool stations HAINBUCH chuck system Counter spindle Bar loader from STAMAG Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Opis sledi Gkodsx A Hdfepfx Ab Tsf

Stanje: dober (rabljeno), Interna številka artikla: 25093 Pogonski nosilec orodja Nastavljiva kotna glava Index / Traub Št.: W 7045011A Zelo lepo ohranjen! Gkodpfjxvat Tex Ab Tsf Nosilec je bil v uporabi na stroju Traub TNL18

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, V okviru stečajnega postopka ponujamo: 2 x CNC stružnica (1 x protivreteno (1 x spodnji revolver)), rabljena + podajalnik palic + dodatna oprema 1. CNC stružnica s protivretenom Proizvajalec: MIYANO Tip: BNC 34-S Leto izdelave: 1989 Krmiljenje: Fanuc 0-T Gkedsx A Aw Iepfx Ab Tef - Podajalnik palic HYDROBAR - 2 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 2. CNC stružnica z 2 x revolverjem Proizvajalec: MIYANO Tip: JNC 45-T Leto izdelave: 1989 Krmiljenje: Fanuc 0-T Podajalnik palic HYDROBAR - 1 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 3. Dodatna oprema - Približno 65 x napenjalna tule - Približno 40 x komplet čeljusti - Različni nosilci orodij + orodja - Dokumentacija Stroji niso testirani, vendar so bili uporabljeni do konca. Prodaja iz lokacije, nakladanje možno za doplačilo.

Leto izdelave: 1989, Stanje: pripravljen za uporabo (rabljen), Prehod vretena: 42mm, maks. premer obdelovanca: 115mm, število vrtljajev: 3150 min⁻¹, moč: 9kW, dolžina palice: 5200mm. Dimenzije stroja X/Y: pribl. 2100mm/1000mm, teža: pribl. 1500kg. Vključno s podajalnikom palic Stamag D 5000 in različnim priborom, kot so vpenjalne in podajalne čeljusti. Dokumentacija je na voljo. Možen ogled na lokaciji. Gjdpfx Asxwn Iheb Tjkf

Stanje: rabljeno, Leto izdelave: 2005, Krmiljenje Traub TX8i Teža stroja pribl. 4000 kg 6300 vrt/min Dolžina palice: 3200 mm Gjdpexzk Rmefx Ab Tokf Premer palice: 5-42 mm

Stanje: rabljeno, Leto izdelave: 2004, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 18.5 kW Torque: 230 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Sub Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 11 kW Torque: 210 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Parts ejector: Hydraulic with flushing Travel in Z: 520 mm Rapid traverse in Z: 30 m/min Tool Turret I (X/Y/Z): Technology: 10-station turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z: 140/70/450 mm Gkedpfx Absxhbfns Tef Rapid traverse in X/Y/Z: 15/6/30 m/min Tool Turret II (X/Z): Technology: 10-station turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Z: 140/450 mm Rapid traverse in X/Z: 15/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material feed: Short bar loader, FMB SL80S Finished parts discharge: Hydraulic part gripper with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Additional equipment: Various tool holders, flushing gun

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 10.170 h, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, Opis sledi Gedpex A Ha Hofx Ab Tskf

Stanje: dober (rabljeno), Interna številka artikla: 25092 Poganjalo držalo orodja Nastavljiva kotna glava Index / Traub Št.: W 7045011A Gkedjxvazkspfx Ab Tjf Zelo dobro ohranjeno stanje! Držalo je bilo uporabljeno na stroju Traub TNL18

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel: Z-axis travel: 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Gjdju Ix N Sopfx Ab Tskf Spindle bore: Ø 60 mm Operating hours / Power-on hours: 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. (LxWxH): 3.6 x 2.5 x 2.2 m Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm hydraulic clamping Operation via double foot switch and control panel/operator console. Coolant system The Traub has an integrated chip conveyor with a discharge height of 1,100 mm (currently not functional). Accessories: various small parts 8 various machine feet without tailstock i.D.

Stanje: rabljeno, Leto izdelave: 1990, Tehnične podrobnosti: Premer struženja: 445 mm Dolžina struženja: 2000 mm Skupna potrebna moč: 34 kW Teža stroja pribl.: 7,5 t Prostorske mere pribl.: 6 x 2,5 x 2,2 m Premer struženja nad posteljnim vozičkom: 660 mm Premer vretena: 65 mm Hitrosti vretena: 16 - 3150 min⁻¹ Hitri pomik X-smer: 10 mm/min Hitri pomik Z-os: 15 m/min S CNC krmiljenjem TX 8 D Gsdjw I R Ndjpfx Ab Tjkf C-os z gnanim orodjem Revolverska glava s 14 pozicijami Konjiček, luneta SMW SLK 520 N kot NC-os Transporter za odrezke in hladilni sistem

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Gsdpfxjwg Taks Ab Tjkf Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, SAMO 8.300 ur vretena! Krmilnik: TX 8 i-p Gedpfx Aoxrf Etsb Tskf GLAVNO VRETENO maks. premer palice: 32 mm maks. dolžina obdelovanca - dolgi način struženja: 245 mm - kratki način struženja: 125 mm maks. hitrost vretena: 6.400 /min C-os PROTIVRETENO maks. premer palice: 32 mm maks. dolžina vpenjanja obdelovanca: 250 mm maks. hitrost vretena: 6.000 /min C-os ZGORNJI REVOLVER ORODIJ Število postaj: 10 vse gnane maks. hitrost: 12.000 /min SPODNJI REVOLVER ORODIJ Število postaj: 9 vse gnane maks. hitrost: 12.000 /min ZADNJA ENOTA Število postaj: 8 od tega 3 gnane (T12, 13 in 14) Hitrost T12 & T14: 12.000 /min Hitrost T13: 4.000 /min Transportni trak za dele Transporter za ostružke KSS črpalka 20 bar IFS filter za oljno meglo Podajalec palic FMB turbo 3-36

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 47.600 h, številka stroja/vozila: 325, Dobro ohranjena Gjdpfsh Dzqlox Ab Tskf

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Gedst E Dbyspfx Ab Tskf Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.