Traub Tnc 65 Dgy nakup rabljenega (87)

Stanje: dober (rabljeno), Interna št. artikla: 25090 Pogonski nosilec orodja Index / Traub Št.: W 7045003 B Zelo dobro ohranjeno stanje! Nosilec je bil uporabljen na stroju Traub TNL18. Cpedpfx Aexu Uz Nefxeu

Stanje: dober (rabljeno), Notranja št. artikla: 25091 Pogonski nosilec orodja Nastavljiva kotna glava Index / Traub Št.: W 7045011A Cpjdpfxjxvaqlj Afxeu Zelo dobro ohranjen! Nosilec je bil uporabljen na stroju Traub TNL18.

Stanje: dober (rabljeno), Interna številka artikla: 25093 Pogonski nosilec orodja Nastavljiva kotna glava Index / Traub Št.: W 7045011A Cpjdpfexvat Tex Afxou Zelo lepo ohranjen! Nosilec je bil v uporabi na stroju Traub TNL18

Stanje: dober (rabljeno), Interna št. artikla: 25088 Nosilec orodja Csdoxu Dcvepfx Afxjpu Nosilec za navojno vrtinčenje vklj. z rezilnimi ploščicami Index / Traub Št.: 12068219 Orodje je bilo v uporabi na stroju Traub TNL18 Zelo dobro ohranjen!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Cpodpfowuddvjx Afxsu Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We offer you a TRAUB TNL 26 CNC Swiss-type automatic lathe, year of manufacture 2004. The machine is in well-maintained, fully functional condition. Important note: This model comes equipped with only one turret. While the TNL 26 was also built in versions with two turrets, this is explicitly the version with a single turret. Technical data (summary) Manufacturer: Traub Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, mounted at the bottom, 12 tool positions, driven (live tool drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt type, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Csdpfx Aexgg Rmjfxepu Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is immediately available and ready for operation; it is ideally suited for precise production of small and medium batch sizes in the automotive, medical, and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex location, ex works Inspection: viewings can be arranged at any time by appointment. For further information or to arrange a viewing, please do not hesitate to contact me at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Stanje: dober (rabljeno), Leto izdelave: 1989, 1 x Automatic Lathe Manufacturer: Traub Model: TD 16 Year of manufacture: 1989 with hydraulic bar feeder LNS Hydrobar Model: 3.16-HS 4.4 Year of manufacture: 1989 Equipment: 6-position turret head Quick-action material clamping Long turning device Cedjvga A Tepfx Afxopu Central lubrication system by Vogel Accessories: See photos The machine can be inspected under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 47.600 h, številka stroja/vozila: 325, Dobro ohranjena Cpedpfxeh Dzqle Afxeu

Leto izdelave: 1978, Stanje: rabljeno, Article: Programmable automatic lathe Cedpfxsl Rmqtj Afxjpu Brand: Traub Model: TF60 / 140 Year of manufacture: 1978 Bar automatic lathe Please contact us for further information and photos via email (at) or

Stanje: dober (rabljeno), Leto izdelave: 2004, TRAUB TX8H CONTROL Weight: 3500 kg Dimensions (LxWxH): 3960 x 1640 x 1800 mm Power: 11 kW Spindle Speed: 5600 / 4000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe is designed for machining workpieces with a turning length of up to 450 mm. --> Suitable for chip-forming metal and plastic machining with defined cutting edges using appropriate tools. --> For clamping in jaw chucks from size 160 up to approx. 250. --> For machining bar stock up to a diameter of 42 or 65 mm, respectively. --> With special EHS version workpiece removal unit --> Chip conveyor extended by 800 mm --> Technical Data Working Area Spindle bore: 42 mm --> Spindle head DIN 55026, size: A5 --> Chuck diameter: 160-175 mm / 200-250 mm --> Max. turning diameter: 275 mm --> Clearance above spindle center: 35 mm --> Max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool Carrier Tool holders for cylindrical shank DIN 60880: 12 pcs --> Shank diameter: 30 mm --> Tool cross-section: 20x20 mm --> Indexing time, 1st position: 0.5 sec. --> Indexing time, each subsequent position: 0.15 sec. --> Feed Drives X-Axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> Rapid traverse/Path speed: 15 m/min --> Z-Axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 18 m/min --> Y-Axis: --> Slide travel: ±35 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 10 m/min --> C-Axis: --> Speed: 100 rpm --> Torque: 140 / 196 Nm --> Electronic resolution: 0.001 degree --> Tailstock Quill diameter: 70 mm --> Quill stroke: 60 mm --> Rapid retraction travel: 280 mm --> Quill clamping force at 55 bar: 8600 N --> Mounting per DIN 228: Mk 4 Cpodpswwl Iuefx Afxou --> Steady Rest Clamping range: 8 - 95 mm --> Parts Removal Device Max. part length: 250 mm --> Max. part weight: 3 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, TRAUB A-15 v odličnem delovnem stanju s sistemom prehodne luknje. Cpodpfx Afsxz R Ilexsu

Stanje: dober (rabljeno), Leto izdelave: 2001, TNK 36 letnik 2001 Cpodpfxexv Sr Is Afxsu vključuje transporter ostružkov, filtrirni sistem Resy v dobrem stanju, obratoval brez polnilnika, ni priključen na elektriko

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, V okviru stečajnega postopka ponujamo: 2 x CNC stružnica (1 x protivreteno (1 x spodnji revolver)), rabljena + podajalnik palic + dodatna oprema Codpfxjx Ed A Ds Afxepu 1. CNC stružnica s protivretenom Proizvajalec: MIYANO Tip: BNC 34-S Leto izdelave: 1989 Krmiljenje: Fanuc 0-T - Podajalnik palic HYDROBAR - 2 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 2. CNC stružnica z 2 x revolverjem Proizvajalec: MIYANO Tip: JNC 45-T Leto izdelave: 1989 Krmiljenje: Fanuc 0-T Podajalnik palic HYDROBAR - 1 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 3. Dodatna oprema - Približno 65 x napenjalna tule - Približno 40 x komplet čeljusti - Različni nosilci orodij + orodja - Dokumentacija Stroji niso testirani, vendar so bili uporabljeni do konca. Prodaja iz lokacije, nakladanje možno za doplačilo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Cedpfx Afewg Taksxjpu Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): Cpedpfx Afet E Dbyjxou - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 8.000 obr/min, prehod palice: 32 mm, model krmilnika: Traub TX8i-S, število mest v zalogovniku orodij: 12, Oprema: transportni trak za ostružke, TEHNIČNI PODATKI Premer prehoda palice: 26 / 32 mm Maks. hitrost glavnega vretena: 8.000 obr/min Cpodpfx Aexlfk Njfxeu Osi: X1 / Y1 / Z1, C-os integrirana v glavno vreteno Revolver: 1 Število orodij: 12 Pogonska moč: 6,7 kW (100 % ED) / 10,7 kW (40 % ED) Navor: 21 Nm (100 % ED) / 32 Nm (40 % ED) PODROBNOSTI O STROJU Čas vklopa: 116.721 h Obratovalne ure: cca 48.000 h Krmiljenje: Traub TX8i-S Dimenzije & teža Dimenzije (D × Š × V): cca 4,4 × 1,4 × 1,7 m Teža stroja: cca 4.000 - 4.200 kg OPREMA Transporter za ostružke: lamelni trak, višina izmeta cca 950 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 22.232 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 317, stružna dolžina: 1.000 mm, premer struženja: 680 mm, moč vretenovega motorja: 60.000 W, največja hitrost vretena: 2.800 obr/min, Oprema: transportni trak za ostružke, TEHNIČNE PODROBNOSTI Dolžina struženja: 1.000 mm Premer struženja: 680 mm Moč glavnega motorja: 60.000 W Maks. število vrtljajev vretena: 2.800 obr/min PODROBNOSTI O STROJU Model krmiljenja: TX 8H Električni podatki Obratovalna napetost: 400 V 3~ Krmilna napetost: 24 V ~ Napetost ventila: 24 V – Napetost sklopke: 24 V – Skupna moč: 60 kW Skupni tok: 100 A Čas obratovanja vretena: 22.232 ur OPREMA Dokumentacija/priročnik Brezstopenjsko nastavljivo število vrtljajev Transporter za ostružke RUEZ SFWW2 Separator olja Držalo orodja VDI40 Popolna dokumentacija Cjdpfxsw Rp Sve Afxepu Opomba: Demontaža in nakladanje sta lahko podprta z osebjem in žerjavom.

Stanje: rabljeno, Leto izdelave: 2001, Drehdurchmesser 340 mm Drehlänge 750 mm Steuerung SYSTEM TX 8H Spindeldurchlass 80 mm Umlaufdurchmesser über Planschlitten 530 mm Umlaufdurchmesser über Bett 665 mm Drehzahlbereich - Hauptspindel 3.150 min/-1 Antriebsleistung - Hauptspindel 22 kW Anzahl der Werkzeugplätze 12 Pos. Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Cpjdpfoxwdw Eex Afxou Es sind 2 Maschinen verfügbar. Preis pro Stück. Maschine 1: - Bilder 1-5 - Betriebsstunden ca.55.790 h Maschine 2: - Bilder 6-10 - Betriebsstunden ca.54.347 h Technische Merkmale & Zubehör: - Y Achse - Zubehörpaket mit starren und angetriebenen Werkzeughaltern -Späneförderer Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Leto izdelave: 1989, Stanje: pripravljen za uporabo (rabljen), Prehod vretena: 42mm, maks. premer obdelovanca: 115mm, število vrtljajev: 3150 min⁻¹, moč: 9kW, dolžina palice: 5200mm. Dimenzije stroja X/Y: pribl. 2100mm/1000mm, teža: pribl. 1500kg. Vključno s podajalnikom palic Stamag D 5000 in različnim priborom, kot so vpenjalne in podajalne čeljusti. Dokumentacija je na voljo. Možen ogled na lokaciji. Codpjxwn Ihsfx Afxjpu

Stanje: zelo dobro (rabljeno), CNC machine Traub TNL 26 Cpedohlp Sdopfx Afxju Condition: used, well maintained Sale without any warranty

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, stružna dolžina: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Cpjdpfx Aowtq Ufsfxju Spindle bore: 42 mm Tool post: 4 slots MACHINE DETAILS Length (L - R): 2,500 mm Width (F - B): 900 mm Height: 1,700 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25//16455, največja hitrost vrtenja: 2.800 obr/min, vrtljajska hitrost (min.): 1.400 obr/min, stružna dolžina: 65 mm, TECHNICAL DETAILS Turning length: 65 mm Threading length: 40 mm Maximum part length: 65 mm Spindle speeds: 1,400–2,800 rpm Csdpfx Afjwtq Uloxopu MACHINE DETAILS Total power requirement: 2.6 kW Machine weight: 0.7 t Space requirement: 1,200 x 700 x 1,600 mm Main voltage: 415 V

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: omejena funkcionalnost, izvrtina vretena: 42 mm, največja hitrost vretena: 4.000 obr/min, moč vretenovega motorja: 7.500 W, Stroj je v stalni uporabi in proizvaja hidravlične priključke iz šestkotnika 22 (avtomatno jeklo). Zelo tog in učinkovit stroj za enostavne komponente. Stroj ima tangencialni navojni nastavek FETTE. Na voljo sta 2 taka stroja, eden izmed njih je opremljen s stranskim vrtalnim nastavkom ter nastavkom za rezkanje navojev z veliko garnituro rezkarjev. Oba stroja imata velik komplet držal in puš. Cena za oba stroja je predmet dogovora. Csdpexq Rz Djfx Afxepu

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE Codpfx Afeuhawhexjpu - Max. bar diameter: 13 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 26,709 [h] COUNTER SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 16,854 [h] - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] - Z stroke: 50 [mm] - Driven tool speed: 8,000 [rpm] LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] * Y travel: -9.5 / +28 [mm] - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 16 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,850 x 1,100 [mm] - Machine height: 1,480 [mm] - Machine weight: 2,000 [kg] EQUIPMENT - Control: Traub TX 8i - Driven guide bushing - Parts removal device - Parts conveyor belt - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 [l] * with paper filter - Bar loader: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Leto izdelave: 1986, Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 360mm/160mm, centre distance: 800mm, travel X/Z: 205mm/810mm, spindle speed: 3,150 rpm, spindle bore: 60mm, tool stations: 8, rapid traverse X/Z: 10 m/min. Machine dimensions X/Y/Z: approx. 3,300mm/1,800mm/1,800mm, weight: approx. 3,300kg, control: Traub System TX-8. An on-site inspection is possible. Codpfjwmqx Dex Afxjpu