Rob Tiska nakup rabljenega (26.267)

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1200 x 930 x 1080 mm Weight: 390 kg Total power requirement: 1.5 kW Dowel Cutting and Chamfering Machine DCC-220 - Working range: 6 - 18 mm - Minimum dowel length: 6 - 18 mm - Maximum dowel length: 150 mm - Capacity: approx. 7,500 - 15,000 cut-offs/hour - Continuously adjustable feed rate - Drive motor: 0.37 kW / 750 rpm - Milling motor: 0.37 kW / 2,900 rpm - Saw motor: 0.37 kW / 2,900 rpm - Chamfering motor: 0.37 kW / 2,900 rpm - Milling spindle speed: 1,450 rpm Lhjdpfsvz Et Hex Afrsp - Saw spindle speed: 2,900 rpm - Chamfering cutter spindle speed: 1,450 rpm - Extraction port diameter: 3 x 80 mm - Air requirement: approx. 900 m³/hour - Machine frame made of cast iron - Including guide for dowel diameter of your choice - Dimensions: L = 1200, W = 930, H = 1080 mm - Weight: 390 kg

Stanje: kot nova (razstavni stroj), - Press force: 700 kN - Press size: 2500 x 1250 mm - Medium heated (water), incl. heating unit up to a temperature of 85°C. - Incl. Joos A.B.S. system for protection of the heating plates in case of incorrect loading Lhsdpfx Afewaznsrjp Price on request!

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 160 tons Side frame passage: 600 mm Installation height: 420 mm stroke top, adjustment bottom Ram adjustment: 80 mm Lsdpfx Afecna Hfjrjhp Table surface: 1100 x 1100 mm Ram surface: 1030 x 800 mm Pass-through hole in table: 680 x 250 mm Adjustable stroke: 30–100 mm Strokes per minute: 40–180 Power requirement: 18.5 kW Weight: 20 tons Height: 3950 mm Siemens press control and ALBA roller feed, year 1989, 400 x 3 mm

Leto izdelave: 1994, Stanje: dober (rabljeno), številka stroja/vozila: 25286,

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Lhsdpod Ixadsfx Afrep Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Leto izdelave: 2021, Stanje: novo, Unladen weight: 765 kg Lhodpfxen Tm S Uj Afrjp Trenching bucket K160 L1400 OQ65 reversible blade This bucket is ready for dispatch. For transport arrangements, please contact us with your delivery address. We can offer affordable shipping solutions. We manufacture trenching buckets with OilQuick or Lehnhoff mounting systems. For detailed information, please contact us.

Stanje: rabljeno, Leto izdelave: 1992, HYDRAP tip HPSKZ 63t / 20t Tlak: 63t Dimenzije spodnje mize: 700x700 mm Lhodpfxjw Slnij Afrjp Dimenzije zgornje mize: 600x600 mm Dolžina hoda: 600 mm Svetla višina: 800 mm Blazina: 20t

Stanje: kot nova (razstavni stroj), Technical Data: Lhedpfx Afofhqhderop Maximum pressing force: 800 kN Adjustment range: 10 – 100 % Total pressing area: 3100 x 1300 mm Specific pressure at full capacity: 2.0 daN/cm² (kg/cm²) 6 cylinders, 80 mm diameter, 400 mm stroke Hydraulic operating pressure: 265 bar Press chamber height: 400 mm Heating Plates: Electric heating plate 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, scratch- and abrasion-resistant. Thermal high-pressure insulation between the heating plate and press table. Maximum operating temperature: 120°C.

Stanje: pripravljen za uporabo (rabljen), Trumpf TKFB 100 weld seam former, complete with case and accessories, includes two attachments (30° and 45°). Lhjdpod Spwdsfx Afrsp

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Pressure: 45 tons Installation height: 205/305 mm Table: 700 x 450 mm Ram: 700 x 360 mm Ram adjustment: 50 mm Stroke: 10 - 50 mm Strokes per minute: 80 - 400 Power requirement: 11 kW Weight: 7,200 kg Height: 3,100 mm Siemens S7 control system Feed with gripper Lhedsgfvnnspfx Afrop

Stanje: novo, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. The OD tube deburring machines remove burrs from tubes after cutting. This machine simultaneously removes internal and external burrs from tubes and profiles without rotating the tube material. Round, square, rectangular, and various other tube and profile shapes are deburred within just a few seconds. Lhsdpsd Ixbzjfx Afrop Thanks to the rotating brush, the operator does not need to rotate the tube. The tube clamping system enables precise insertion of the tubes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.

Stanje: rabljeno, Leto izdelave: 1991, Pressure 300 t Column gap 1350/1000 mm Stroke 500 mm Machine weight approx. 20 t Table area 1900x1600 mm Ram area 1900x1600 mm Table height 1000 mm Stroke and pressure shut-off Lodpfx Afovn U S Serehp Working feed 10 mm/s

Leto izdelave: 2020, Stanje: novo, The PT-400 belt press is a machine designed for extracting apple must. This process takes place between the machine’s belt and appropriately positioned press rollers. The extracted juice is pumped directly into the pasteurizer tank. The entire unit is constructed from AISI 304 stainless steel. Lsdpfx Asfgl Hfefrehp TECHNICAL SPECIFICATIONS: - Capacity: up to 500 kg of apples per hour - Juice yield from pressed apples: up to 75% - Installed power: 0.8 kW, 230V - Water consumption: up to 4 l/min - Weight: 500 kg - Belt width: 400 mm - Adjustable belt speed - Juice tray with screen, mesh diameter: 1 mm - Juice pump included

Stanje: dober (rabljeno), Press control unit from Brankamp, removed from a used machine due to a complete rebuild of the control system. Not tested, but was in use up to removal. Lhedjbu N N Nepfx Afrop May be suitable for spare parts or as a donor unit.

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, machining motor, spindle motor, milling motor - Power: 0.4 kW, 11,300 rpm at 200 Hz - Voltage: 133 volts - Shaft mount: Ø 20 mm Lhodpfxeb A Rybs Afrop - Tool: mm - Dimensions: 250/60/H130 mm - Weight: 3.8 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Pressure: 125 tons Lateral frame passages: yes Installation height: 380 mm Table surface: 1100 x 700 mm Ram surface: 700 x 350 mm Stroke: 01-120 mm Max. strokes per minute: approx. 70 Power requirement: 22 kW Weight: 8,500 kg Lsdpodvb Tfofx Afrshp Height: 2,900 mm

Stanje: novo, DM1100 C Edge Rounding Machine for Laser, Plasma, and Punched Parts The DM1100 C performs edge rounding and deburring of sharp burrs on both inner and outer edges of steel, stainless steel or aluminum parts after laser cutting, shearing, or punching processes. The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks, providing uniform edge rounding for the entire product. A key advantage of this machine is its ability to deburr products with protective surface film without damaging the foil – only the edges are processed. Lhjdpfsd Evcwex Afrep Excellent processing of parts in a wide range of dimensions, from small parts (50 x 50 mm) up to 1100 mm. Technical Data – DM1100 C Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Power consumption (A): 13 Extraction port per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Stanje: rabljeno, Leto izdelave: 1998, Pressure 40 t Stroke 250 mm Total power requirement 6 kW Lsdsvnwfnjpfx Afrehp Machine weight approx. 3 t Frame/gap width 600/350 mm Table surface 860x620 mm Ram surface 860x620 mm Table height 900 mm Manual lever operation Pressure cut-off

Stanje: rabljeno, double-end profiler, edge processing machine, scoring motor, cutting motor, spindle motor, milling motor Lsdpecmyg Hofx Afrehp - Motor: 2.35/3.3 kW, 1420/2850 rpm at 50 Hz - Shaft mounting: Ø 30 mm - Dimensions: 665/290/H180 mm - Weight: 61 kg

Leto izdelave: 1983, Stanje: rabljeno, Pressure: 75 tons Table: 630x620 mm Slide: 500x450 mm Lhedpoctl Dtjfx Afrsp Installation height: 370 mm Slide adjustment: 80 mm Lateral column passage: 300 mm Stroke adjustable: 8-100 mm Strokes per minute: 7-160 Power requirement: 11 kW Weight: 7 tons Height: 3050 mm SIRI roller feeder for material 300x3 mm Hydraulic overload protection Hydraulic Ortlinghaus clutch with auxiliary brake

Stanje: rabljeno, Double-end tenoner, edge processing machine, scoring motor, cutting motor, spindle motor, milling motor - Voltage: 165 V - Power: 0.22 kW motor, 17,250 rpm at 300 Hz Lhedpfxjcx Ifie Afrop - Shaft diameter: Ø 15 mm - Thread: right-hand - Quantity: 5 motors available - Price: per unit - Dimensions: 200/70/H90 mm - Weight: 1.8 kg

Stanje: rabljeno, Double-end tenoner, edge processing machine, scoring motor, machining motor, electric motor, spindle motor, milling motor - Power: 3.7 kW 2885 rpm at 50 Hz - Power: 5.2 kW 5870 rpm at 100 Hz - Voltage: 380 V - Shaft mounting: Ø 40 mm - Tool: mm - Dimensions: 480/250/H150 mm - Weight: 36.5 kg Lhsdpfsb A Tbfjx Afrep

Stanje: rabljeno, Double-end tenoner, edge processing machine, scoring motor, main spindle motor, electric motor, spindle motor, milling motor - Power: 3.7 kW 2885 rpm at 50 Hz - Power: 5.2 kW 5870 rpm at 100 Hz Lhsdpfx Aob A Tbgjfrjp - Voltage: 380 V - Tool shaft: Ø 40 mm - Tool: mm - Dimensions: 480/250/H150 mm - Weight: 36.5 kg

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, machining motor, spindle motor, milling motor - Power: 0.4 kW, 11,300 rpm at 200 Hz Lhodpfx Aob A Tbhsfrjp - Voltage: 133 volts - Shaft diameter: Ø20 mm - Tool interface: mm - Quantity: 3 motors available - Price: per unit - Dimensions: 250/60/H155 mm - Weight: 4.2 kg

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor - Power: 4.4 kW, 2890 rpm at 50 Hz - Power: 6.6 kW, 5880 rpm at 100 Hz - Voltage: 220/380 Volt - Shaft mount: Ø 35 mm - Tool: Ø 240 x 20 mm - Dimensions: 550/270/H150 mm Lodpfxsb A Tbuo Afrehp - Weight: 51 kg