Rob Tiska nakup rabljenega (26.269)

Stanje: novo, Leto izdelave: 2024, MOBIL 2500 Mobile Pneumatic Edge Press for Furniture Manufacturing! Technical Data MOBIL Type 2500 (Type 3000): > Sturdy welded-frame construction made from rectangular hollow sections with stop and straightening guide, suitable for solid wood, veneer, and plastic edges. Lhedeyuv Topfx Afrep > Integrated electric heating rod made of durable AL alloy, cross-section 64 x 46 mm, adjustable from 50 - 248°C, power 1200 (1450) watts. > 4 (6) clamping and pressing units, each with 7-fold ball bearing guidance. Each pressing unit features one clamping and one pressing cylinder; gluing width adjustable via moveable straightening guide from 12 - 105 mm. Edging thickness up to 50 mm for solid wood edges. > Adjustable counter-stops ensure precise edge overhang. > The clamping cylinders and counter-stops are equipped with rubber pads. The stop and straightening guide have a special glue-repellent coating. > The pneumatic pressing units can always be actuated in pairs, with one switch for 'clamping the workpiece' and one switch for 'pressing'. > Press is mobile with 4 swivel casters, 2 of which are braked. > The press is equipped with a pneumatic maintenance unit, 3/8" connection, adjustable from 3-10 bar. Electrical connection for heating rods is 230 V, 50 Hz, 1200 (1450) watts. Usable dimensions W x H x D in mm: 2500 x 50 x 105 External dimensions W x H x D in mm: 2700 x 1200 x 850 Additional options and accessories for MOBIL available on request! Packaging: €92

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, Pressure: 110 t Passage width: 1500 mm Stroke: 650 mm Total power requirement: 15 kW Approx. machine weight: 11 t Dimensions L x W x H: approx. 2640 x 3200 x 3650 mm Return force: 11 t Column diameter: 120 mm Max. working height: 1000 mm Table size: 1990 x 1000 mm Ram size: 1990 x 1000 mm Ram travel: 650 mm Table height above floor: approx. 800 mm Approach speed: 10 mm/sec Lsdpfxsfhcc Tj Afrshp Pressing speed: 10 mm/sec Oil tank: 200 l Oil cooling (electric): 1.5 kW (max)

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, Pressure: 125 t Ljdpfefxykpex Afrshp Passage width: 1000 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 6 t Dimensions (L x W x H): 2540 x 933 x 3000 mm Retracting force: 12 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 600 x 1300 mm Table plate: 600 x 1300 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Motor power: 11 kW Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Oil tank: 250 l Rapid traverse speed: 10 mm/sec Column diameter: 120 mm Operating principle of the tool testing press: 1. The main switch is activated by turning. 2. Then, the press lighting should be switched on. 3. The tool is placed into the pressure center of the press. If the tool requires greater force off-center (e.g., with combination tools where the first station punches thick sheets while subsequent stations only carry out fine work), it may be necessary to shift the tool slightly to the left or right so that the counterforce from the material acts as centrally as possible on the ram. 4. The lower tool is bolted to the press table, and the upper tool is then lowered. 5. To do this, switch on the pump at the control cabinet. The fall protection then releases the ram. 6. A slow pull on the control lever starts the downward movement. The more you pull, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec. 7. The pressing force is set via a rotary knob, located to the right near the manual control lever. 8. After the ram reaches the upper tool, it is attached to the ram. 9. Any transport locks are removed if present, then the press is opened by pressing the manual lever. The speed of the upward movement can be continuously adjusted from 0 to 25 mm/sec using the manual lever.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, Pressure: 40 t Passage width: 1000 mm Stroke: 400 mm Approx. machine weight (without operating fluids): 3.5 t Dimensions (L x W x H): 2065 x 700 x 2905 mm Retracting force: 4 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 1320 x 600 mm Table plate: 1320 x 600 mm Table height above floor approx.: 750 mm Oil cooling (electric): 1.5 kW (max) Motor power: 8 kW Feed speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Rapid traverse speed: 10 mm/sec Column diameter: 100 mm Lhsdpjfxykwefx Afrep Hydraulics and tank mounted on top of the press: 2400 ? All-round maintenance platform: 3600 ? Siemens S7 1200: 4600 ? Drip tray made of painted steel: 850

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0199 - Rev.00, Pressure: 160 t Passage width: 1200 mm Stroke: 600 mm Machine weight approx. (without operating materials): 7 t Dimensions (L x W x H): approx. 2400 x 1400 x 3400 mm Return force: 16 t Max. working height: 800 mm Return speed: 25 mm/sec Ram plate: 1670 x 800 mm Table plate: 1670 x 800 mm Table height above floor approx.: 800 mm Oil cooling (electric): 1.5 kW (max) Motor power: 18 kW Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Travel distance: 600 mm Lhsdpfedxvfhjx Afrop Oil tank: 300 l

Stanje: novo, Leto izdelave: 2024, We offer universal CNC pallet nailing machines for all types of pallets. Lsdpfxjtk Dghs Afrehp The machine is available in two versions: 1. Palletmax – CNC pallet nailing machine with a double table for alternating cycle operation. 2. Palletstar – CNC pallet nailing machine with a triple delta table and a stacking robot, also suitable for pallets up to 2600mm in length. - Easy and fast system for switching and programming for new pallet types. - Available standard and adjustable templates - Low operating and maintenance costs - The highest productivity among machines of this type - Short lead times

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, stiskalna sila: 200 t, Main Cylinder Press Capacity: 200 t - Maximum Operating Pressure: 285 bar - Cylinder Stroke: 1,500 mm - Clear Width / Clear Height: 1,500 mm - Distance Between Columns: 2,050 mm - Maximum Lateral Cylinder Travel: 1,450 mm - Maximum Longitudinal Frame Travel: 2,800 mm - Table Plate Dimensions: 4,000 x 2,000 mm - Hydraulic Power Unit Output: 5.5 kW - Approach Speed: 20 mm/s - Working Speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic units mounted on top of the press - Hydraulic block and valves from Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Hydraulic cooling by air & water (cooler) - Stroke cylinders integrated in the worktable Rod Diameter: 25 mm Lhodpoxrb Nbjfx Afrop - Stroke: 80 mm - Control via cylinder controller or via hydraulic unit for lever control - 10 stroke cylinders are installed - Digital control with position measurement via encoder and pressure measurement incl. value output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum cylinder up/down stroke - Pressure holding time below the table - Decompression time - Working pressure setting - Piece counter - Pre-stop up/down stroke accuracy 0.1 mm - Alarm management - Frame-mounted display for real-time working parameter display - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic power unit with solenoid valves (replacing hanging control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - PLC system from SIEMENS (S7-1200 series) - Siemens brand LCD touchscreen (9-inch) MTP900 installed in control cabinet - Electrical components from SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure for the pressure cylinder adjustable via the LCD touchscreen - Operating modes (semi-automatic and automatic), power, vertical stroke and the dwell time of the upper cylinder are programmable - 99 recipes can be stored, and all aforementioned parameters can be programmed for each recipe - Activation via wireless remote control - Equipped with a double-button for slow/fast up and down movement, emergency stop button, and operation confirmation - For safety, a sensitive safety edge is fitted at the base of the portal columns - Control cabinet mounted to the bridge sidewall - Rotation lock for the cylinder - Oil temperature displayed on the LCD touchscreen - Hydraulic oil overtemperature warning displayed on the LCD touchscreen - Filter clogging status displayed on the LCD touchscreen - System errors displayed on the LCD touchscreen - Press status information displayed on the LCD touchscreen - Once the oil temperature reaches 45°C, the air cooler starts cooling the oil; at 65°C, the machine halts operation until back to operating temperature - Operating manual included - System fulfills all essential safety and health requirements according to CE regulations.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address. Lhjdpfx Ajibikwjfrjp

Stanje: dober (rabljeno), Fronius interface Lsdpfxjwbkf Te Afrjhp

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, širina mize: 1.000 mm, dolžina mize: 600 mm, 40T H-frame press with sliding table Press Specifications • Pressing force: 6–40 t (adjustable) • Max. installation height: 700 mm Lhsdpfx Afsxrby Hsrop • Usable area lower table: 1000 x 600 mm • Usable area slide: 1000 x 600 mm • Frame type: H-frame • Guide column diameter: Ø 100 mm (4 pcs., corners) • Table height from floor: 800 mm • Overall dimensions approx. (W x D x H): 2,100 x 1,600 x 3,500 mm • Total weight approx.: 3,500 kg • T-slots and holes are manufactured according to customer specifications. HYDRAULIC CYLINDER: • Piston stroke: 0–500 mm (adjustable) • Cylinder diameter: Ø 140 mm (1 pc.) • Piston rod diameter: Ø 80 mm (1 pc.) • Max. working pressure: 260 bar • Return speed: 90 mm/s • Slide speed: 9 mm/s • Idling speed: 80 mm/s HYDRAULIC UNIT: • Hydraulic pump (Brand: ASC): 67 + 8 L/min (1 pc.) • Motor rating: 4 kW (1 pc.) • Pressure accuracy during pressing stroke: +/- 5 bar • The hydraulic power unit is mounted at the top rear of the press. • Hydraulic manifold and valves are by DUPLOMATIC. • Pressure displayed via manometer. • Air and oil filters by FILTREC. • Electronic oil level switch is installed. • Air cooler is used for hydraulic cooling. • System pressure adjustable via pressure switch. • Control via sensor. • Rear safety cover (door) on the press. • Safety light sensors and internal lighting included. ELECTRICAL CONNECTION: • Main supply: 400V AC • Control voltage: 24V DC • Frequency: 50 Hz • Hydraulic main motor connection: 4 kW • Total connected load approx.: 6 kW CONTROL CABINET EQUIPMENT: • Protection class: IP 54 • Reserve space: 30% • Cooling: Yes (air cooling) • Internal lighting: Yes • Mode selector switch: Yes (lockable) • Electrical equipment from Siemens, Allen Bradley, and SICK brands.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 200 h, temperatura: 450 °C, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 500 mm, HIGHLIGHTS - High temperatures – for maximum performance - Fast start-up – production volume can be preheated in just over an hour - Large print volume – for high demand of high-end parts made from high-performance polymers - Precise manufacturing – patented mechatronic X and Y handling Lhedpowd Sgdsfx Afrep - Greater stability on large prints – thanks to ARGO vacuum bed system - Improved control – automatic self-levelling bed, dual gearboxes in dual extruder, advanced sensor system - Spool temperature control – for dry polymers and filaments TECHNICAL DETAILS Extrusion temperature: 450 °C Heated chamber temperature: 180 °C Heated chamber parameters: humidity, pressure, temperature Polymers and composites: PEEK, ULTEM(TM) AM9085F, FLEX-TPU, FUNCTIONAL-NYLON, STRONG-ABS, PP, PC-LEXANTM AMHI240F, ABS-ESD, ULTRA-PLA, Carbon PEEK and Carbon PA PRO Build volume: 500 x 500 x 500 mm Accuracy X, Y / Z: 10 / 25 µm Layer resolution quality/speed: 0.225 / 0.300 mm Print speed: 5,000 mm/min Extruder nozzle 2-B: 0.4 mm and 0.6 mm Extruder nozzle 2-HA: 0.4 mm and 0.6 mm Extruder nozzle 3-HSA: 0.4 mm and 0.6 mm MACHINE DETAILS Dimensions: 1,935 x 1,436 x 2,375 mm Weight: 1,700 kg Connection: 15 kVA / 400 V AC / 50 Hz DESCRIPTION - Robust structure made of aluminium bars and steel cover - System with precision balls and ground steel linear guides - Mechatronic movement on X and Y axes with hardened C5 helical rack and pinion - Z-axis movement with precision C6 ball screw system - Moving components and aluminium supports machined by CNC precision processes - Vacuum system for adhesion of polymer layers - Automatic build plate levelling - Safety system with door lock - Integrated HT dryer up to 120 °C with automatic filament loading - Controlled build chamber with forced ventilation - Pneumatic auxiliary system Hyperspeed – optional upgrade available (€30,000)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Portal frame press with 400 T capacity Oil-hydraulic double-column press a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000 x 3000 mm d) Clear opening height 1500 mm e) Overall dimensions approx. LxWxH 6000 x 5000 x 4500 mm f) Oil temperature indicator on tank g) Lubrication via grease nipples h) Table with grid design i) Operation via a control panel mounted on a pivot arm, attached to the bridge j) Pressure adjustment from 60 T to 400 T via monitor k) Bridge movement by two geared motors via rack and pinion l) Cylinder traverses left and right via rack and pinion m) Machine body powder-coated or double painted n) T-slots as per customer specifications o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operator sides: 3 sides Forces Ljdpehyc Nwefx Afrehp Maximum pressing force: 4000 kN Maximum free pulling force: 600 kN Pressurization time (clamped tool, steel on steel): max. 3 sec Dimensions Maximum opening: 1500 mm Stroke and min. opening: 1500 mm / 0 mm Table height above floor: approx. 900 mm Overall height above floor: approx. 4500 mm Minimum hall height: 5500 mm Deflection Measured at max. closing force with 70% load ≤ 0.8 mm/m Weight Total press weight without operating fluids and table plate: approx. 52 T Speeds Fast closing: 17 mm/sec Sound pressure Sound pressure level measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press cylinders: 1 pc. Operating pressure: max. 280 bar Pressurization time: 2–3 sec Pressure accuracy during pressing stroke: ±5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrics Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic main motor connection (IE3): 30 kW Total connected load: approx. 35 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Lhsdoph Uk Nepfx Afrjp Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: novo, Leto izdelave: 2021, Design Single-column press Number of operation sides: 1 side Forces Pressing force (max. at 250 bar): 100 kN Free tear-off force (max.): 10 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions Maximum opening width: 400 mm Stroke and minimum opening: 350 mm Table height above floor: 850 mm Overall height above floor (installation height): approx. 1850 mm Minimum hall height: 2,500 mm Total weight of the press without operating fluids: approx. 1.2 t Speeds Rapid closing: 10 mm/sec Pressing speed: 10 – 0 mm/sec Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 db(A) Hydraulics Number of press cylinders: 1 pc. Maximum operating pressure: 250 bar Press pressure build-up time: 2 sec. Pressure accuracy during pressing stroke: +/- 5 bar Main pump Gear pump: approx. 6 L/min Oil volume: approx. HLP 46 MW 80 liters Electric Main power supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection Main motor: 2.2 kW Total connected load: ca. 3 kW Additional Information Single-column press with 10 t capacity, suitable for continuous multi-shift operation CE Certificate Manufactured according to EU standards Operating manual, technical documentation in German Robust machine body with solid welded construction, manufactured to DIN 8651 Low maintenance and reliable Cylinder with induction hardening and chrome plating Travel speed 0 - 10 mm/sec downward, Lodpfshaqygex Afrehp Opening speed up to 25 mm/sec Initial pressing speed 10 mm/sec, adjustable from 0 to 10 mm/sec Table size: 600x300 mm Ram size: 300x300 mm, with T-slots and central cylinder clamping Overall size: approx. 1100x600x1850 mm Oil temperature gauge on the oil tank Pressure setting from 0.5 t to 10 t (adjustable via rotary knob) Cable remote control for downward/upward movement Machine body powder coated or double painted Control cabinet feed from above with 3000 mm cable and 16-amp plug Assembly, commissioning, and training available at additional cost Equipment Control system: Siemens Hydraulic components: Bosch Rexroth

Stanje: novo, Leto izdelave: 2021, Here are the technical specifications of the offered machine: If this press does not exactly match your requirements, please request an individual offer tailored to your needs with just one click: Contact us for a customized quotation. HIDROBRASIL manufactures presses exactly according to your specifications at surprisingly affordable prices! Technical Data & Information: Hydraulic 17-ton C-frame Press C-frame press with 17-ton capacity, suitable for continuous operation, with these basic specifications: a) Travel speed: 10 mm/s downward b) Opening speed: up to 25 mm/s c) Initial pressing speed: 10 mm/s d) Table size: 400 x 400 mm e) Ram size: 200 x 200 mm, with T-slots and central cylinder clamping f) Overall dimensions approx.: 1150 x 800 x 1750 mm g) Oil temperature display on the oil tank h) Adjustable pressing force from 5 to 17 tons (set via rotary knob) i) Manual lever operation with two speeds j) Machine frame powder-coated or double-painted k) Electrical cabinet cable entry from above, with 3000 mm cable and 16 A plug l) Installation, commissioning, and training available at additional cost Press Type C-frame press Thermal neutral zone 80 – 120 °C Number of operator sides 1 side Forces Pressing force max. (at 250 bar): 170 kN Free return force max.: 10 kN Pressure build-up time (closed die, steel on steel): Max. 2 sec Dimensions Max. opening width: 250 mm Stroke and min. opening: 100 mm Table height above floor: 850 mm Height above floor (overall): ca. 2200 mm Minimum hall height: 2500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% utilization: ≤ 0.3 mm/m Weight Total weight of press (without operating fluids): approx. 1 ton Speeds Fast closing: 10 mm/s Pressing speed: 10 – 0 mm/s Lhsdpfxsgrki So Afrjp Sound Level Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press cylinders: 1 pc Operating pressure max.: 250 bar Pressure build-up time (press): 2 sec Pressure accuracy during pressing stroke: +/- 5 bar Main Pump Gear pump approx.: 6 L/min Oil volume: Approx. HLP 46 MW 100 liters Ambient temperature max.: 40°C Oil temperature max.: 55°C Preheat temperature: (not specified) Electrics Main supply: 400 V AC Control voltage (hydraulic pump): 24 V DC Frequency: 50 Hz Hydraulic main motor connection: 2.2 kW Total power input: Approx. 3 kW Design The press is designed as an oil-hydraulic C-frame press. Hydraulics and tank are located at the top or on the press itself. Hydraulic Unit The hydraulic system is mounted above the press. Safety Features The press meets the applicable safety regulations (UVV) as well as current EU standards and directives for the described scope of delivery, each in their latest versions. Electrics / Controls The control cabinet, with control, power, and safety components, is mounted on the right side of the press. Operation is via hand lever control. Control Cabinet Equipment Protection class: IP 54 Reserve space: approx. 20% Cooling: none Internal lighting: none Mode selector switch lockable: Yes

Stanje: novo, Leto izdelave: 2021, Single-column press with 10 t capacity, suitable for continuous shift operation, supplied with these basic specifications: Lhjdpohma Smsfx Afrjp a) Traverse speed 0 – 10 mm/sec downward b) Opening speed up to 25 mm/sec c) Pressing speed from 0 to 10 mm/sec, adjustable; initial pressing speed 10 mm/sec d) Table size: 600 x 300 mm e) Ram size: 300 x 300 mm, with T-slots and central cylinder clamping f) Overall dimensions approx. 1100 x 600 x 1850 mm g) Oil temperature indicator on the oil tank h) Pressure adjustment range from 0.5 t to 10 t (adjustable via rotary controller) i) Remote cable control for up/down movement j) Machine frame powder-coated or double-painted k) Control cabinet connection from above with 3000 mm cable and 16 amp plug l) Assembly, commissioning, and operator training available at additional cost Design details: Press type: Single-column press Thermal neutrality: 80 – 120°C Number of operator sides: 1 Forces: Pressing force max. (at 250 bar): 100 kN Free lift-off force max.: 10 kN Pressure build-up time, closed die steel-on-steel: max. 2 sec Dimensions: Max. opening width: 800 mm Stroke/minimum opening: 500/300 mm Table height above floor: 850 mm Total height above floor (overall height): approx. 2850 mm Minimum hall height: 3500 mm Parallel deviation at 20°C: n/a Deflection at max. closing force with 70% table coverage: ≤ 0.1 mm/m Weight: Total machine weight (without operating fluids): approx. 1.6 t Speeds: Rapid closing speed: 10 mm/sec Pressing speed: 10 – 0 mm/sec Sound level: Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: Number of press cylinders: 1 Operating pressure max.: 250 bar Pressure build-up time: 2 sec Pressure control accuracy during pressing stroke: n/a Main pump: Gear pump, approx. 6 l/min Oil reservoir: approx. 80 l HLP 46 MW Ambient temperature max.: 40°C Oil temperature max.: 55°C Pre-feed temperature: n/a Electrics: Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection (main motor): 2.2 kW Total connected load: approx. 3 kW

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0303, Pressure: 160 t Clear height: 700 mm Stroke: 400 mm Return force: 16 t Motor power: 15 kW Travel distance: 400 mm Ram plate: 700 x 600 mm Table height above floor: 850 mm Table plate: 700 x 600 mm Forward speed: 10 mm/sec Pressing speed: 10 mm/sec Rapid traverse speed: 10 mm/sec Oil cooling (electric): 1.5 kW (max) Oil tank capacity: 300 l Machine weight approx.: 4.2 t Dimensions (L x W x H): 950 x 2440 x 2400 mm Ejector: 30 x 30 mm Ejector stroke: 150 mm Ejector force: 15 t Ejector speed: 25 mm/sec Number of ejector pins: 1 piece Heating plates (L x W): 550 x 500 mm Safety light curtains front and rear: 6800 Double door with rear monitoring: 2400 Lodpfxjfxyh Rj Afrjhp Side door with right monitoring: 1200 Side door with left monitoring: 1200 The heating plates are 550x500 mm, electrically heated up to 200°C, and insulated from the machine frame. The heating plates are equipped with 12 mm T-slots according to DIN 650; T-slot design per customer specifications. Each heating plate has two temperature sensors ensuring heating precision within ±3°C across a 500x450 mm area. Pressing force is adjusted via a rotary switch in 10 steps. Return speed is 25 mm/sec. The two-hand control panel is rotatable and pivot-mounted on the machine frame. Internal lighting. Heating time is freely adjustable. Heating power approx. 12 kW. The desired temperature is freely adjustable. Upper and lower heating plates can be set independently. After the heating period elapses, a signal sounds and the press opens automatically if desired. Heating plates supplied by German manufacturer ELKOM.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, Portal frame press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500 x 1600 mm d) Clear opening height 700 mm e) Overall dimensions (LxWxH) approx. 4500 x 2300 x 3700 mm f) Oil temperature display on tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots according to customer specification, otherwise 22 mm i) Controls mounted on a pivoting arm attached to the bridge j) Pressure adjustable from 50 T up to 300 T via MONITOR k) Bridge travel driven by two geared motors, rack and pinion drive l) Cylinder moves left and right via rack and pinion drive m) Machine body double-coated n) Cylinder induction-hardened Design Type: Gantry Press Thermally neutral 80–120 °C Number of operator sides: 3 Forces Maximum pressing force: 3,000 kN Maximum free tear-off force: 500 kN Pressure build-up time (closed die, steel on steel): Max. 3 sec Dimensions Maximum opening width: 700 mm Stroke and min. opening: 700 mm / 0 mm Table height above floor: approx. 980 mm Height above floor (overall height): approx. 3700 mm Ledpfxeh Agnuj Afrjhp Minimum hall height: 5,000 mm Deflection Measured at maximum closing force with 70% occupancy: ≤ 0.8 mm/m Weight Total weight of press (without operating fluids and table plate): approx. 22 T Speeds Rapid closing: 17 mm/sec Pressing speed: 8 mm/sec Opening: 55 mm/sec Sound Pressure Sound level measured at 1.5 m height at control panel: max. 78 dB(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders: 1 Operating pressure: max. 350 bar Pressing pressure build-up time: 2-3 sec Pressure accuracy during pressing stroke: +/- 5 bar Main Pump BOSCH REXROTH, approx. 93 L/min Oil volume: HLPD 46 MW, 900 liters Ambient temperature: max. 45 °C Oil temperature: max. 55 °C Electrics Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Connection for hydraulic main motor: IE3, 22 kW Total connected load: approx. 30 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, širina mize: 1.500 mm, dolžina mize: 1.000 mm, hitrost vzvratne vožnje: 10 mm/s, širina plošče bata: 1.500 mm, dolžina plošče bata: 1.000 mm, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 1.200 mm, moč: 9 kW (12,24 KM), Oprema: varnostna svetlobna zapora, If the press does not exactly match your requirements, simply request a customized quote tailored to your specifications with one click: HIDROBRASIL manufactures presses precisely according to your wishes — at surprisingly attractive prices! ##### Mold opener/closer with 40 tons pressing force Table and ram size: 1500 x 1000 mm for heated tools Technical Data: Pressing force: 40 tons Maximum open height: 1800 mm Ram stroke: 1500 mm Oil temperature monitoring: Electric air cooling Lubrication: Manual via grease nipples Travel of extendable table: 1200 mm Speed of extendable table: 30 mm/sec Electrically steplessly rotating ram: Up to 180 degrees T-slots: To customer's specification Pressure adjustment: From 10 tons to 40 tons Monitor: 10" on control cabinet for pressure adjustment and warning alerts Two-hand operation Special Features: Insulation of clamping plates towards the ram: Via resin insulation plate and special ventilation plate Hydraulic system: Components from BOSCH, REXROTH, PARKER, ATOS Safety components: By SICK Control: SIEMENS Remote maintenance unit: SECOMEA - Ethernet Installation and Operating Conditions: Ljdpetwmp Ssfx Afrehp Maximum ambient temperature: 40 °C Height above ground (installation height): Approx. 3800 mm Total weight of the press without operating fluids: Approx. 13 tons This machine is delivered in the colors specified by the customer and complies with all statutory requirements and EU standards. ##### Are you looking for a precisely tailored machine? Contact us for a personalized offer.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Double-column press, 20-ton capacity a) Closing speed up to 10 mm/sec b) Opening speed up to 30 mm/sec c) Table size between columns: 1400x1100 mm d) Ram size between columns: 1400x1100 mm e) Manual lubrication (via grease nipples) f) UKF recirculating-cooling-filtration system (electric cooling) g) Pressure setting from 4 T to 20 T (adjustable via rotary knob) h) Stroke adjustment via sliding control Design Press type: Double-column press, hydraulic Thermally neutral: 80–120°C Number of operator sides: 1 side Forces Pressing force max.: 200 kN Free return force max.: 20 kN Pressure build-up time (closed tool, steel-on-steel): max. 4 sec. Dimensions Max. opening width: 500 mm Stroke: 300 mm Table height above floor: approx. 900 mm Overall height above floor: approx. 2,800 mm Minimum hall height: 3,500 mm Parallel deviation (at 20°C): #ERROR! mm Deflection Measured at max. closing force with 2/3 occupancy: ≤ 0.4 mm/m Weight Total weight of the press without operating fluids: approx. 3 t Table cut-out size: 1100x850 mm Speeds Rapid closing speed: 9 mm/sec Pressing speed: 9 mm/sec Ledpehmbhqjfx Afrjhp Sound pressure Sound pressure level, measured at 1.5 m height at control panel per DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press/travel cylinders: 2 pcs. Operating pressure: max. 280 bar Pressure build-up time (presses): 3–5 sec. Pressure accuracy during pressing stroke: +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 l/min Oil volume: approx. HLP 46 D 150 liters Ambient temperature: max. 40°C Oil temperature: max. 55°C Flow temperature: °C Cooling circulation pump ACS approx. 6.5 l/min Electrical Main supply: 400 V AC Control voltage: 24 V Frequency: 50 Hz Hydraulic motor connection: Main motor 3 kW Total connected load: approx. 5 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Hydraulic 400-ton column press suitable for continuous shift operation, with the following basic specifications: a) Closing speed: 100 - 450 mm/sec b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen) Lhsdpfog Iihwsx Afrjp c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen) d) Accumulator with approx. 4 nitrogen bottles e) Table size (clamping area): 2700 x 1700 mm (front view, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots as per customer specification h) Table, ram, and press head are stress-relieved annealed i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping area 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 mm (floor area) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light curtains 14 mm on front and rear sides p) Recirculating oil cooling (adjustable via touchscreen) q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision-milled s) Side-monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m away from the press u) Pressure adjustment from 50 to to 400 to (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programming mode, setup mode, single stroke + continuous stroke (selectable via rotary switch) x) Swiveling operator panel with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine body primed and painted bb) Installation, commissioning, and training available at extra cost The hydraulics of the presses we offer are completely assembled using components from BOSCH-REXROTH/Parker/HAWE. Only components (SIEMENS) that are readily available in Germany are used in the control cabinet. All safety equipment, except the light curtains, is supplied by SICK. The control system is supplied by SIEMENS (S7 1500) including the 15-inch touchscreen monitor. The SIEMENS remote maintenance unit SECOME-Ethernet is included in the scope of delivery. SPECIAL FEATURE: Our design, featuring two press cylinders and the accumulator, allows full performance with a main motor of just 90 kW. Please refer to section 1.3 for technical details. Technical Data Design Type of press: Column press Thermally neutral: 80 – 120°C Number of operator sides: 2 Forces Press force max.: 4,000 kN Free opening force max.: 600 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions – intended minimum tool height: 600 mm Max. opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 tons Speeds (see attached cycle diagram) Rapid closing: 100 - 450 mm/s Pressing speed at F max.:

Leto izdelave: 2021, Stanje: kot nova (razstavni stroj), It is equipped with a cylinder for 10 to 135 tonnes and a small auxiliary cylinder for 1,500 kg to 7 tonnes. Idle travel: 2–10 mm per second Pressing speed: 2 mm per second Lsdpfxsigg E Ho Afrohp Table size: 1100 x 650 x 120 mm Maximum open height: 800 mm Maximum table height: 900 mm Cylinder stroke: 400 mm Total height: 2,900 mm Weight: 2.3 tonnes Tank capacity: 200 L Pump output: 60 L Main motor: 5 kW Control cabinet with: Controller: SIEMENS S7 1200 Safety technology by SICK Remote maintenance module

Leto izdelave: 2021, Stanje: novo, Here are the technical specifications of the machine on offer: If this press does not precisely meet your requirements, please request a customized quote tailored exactly to your needs with a single click: Contact us for a custom quote. HIDROBRASIL manufactures presses to your specifications at surprisingly affordable prices! Technical data & information: Hydraulic 50 T heated press for laboratories Lhedogrkigjpfx Afrop - This is an under-ram press with a daylight opening of 400 mm - Ram stroke: 300 mm - Heated platen temperature up to 250°C - Heated platen size: 200 x 200 mm - Weight: approx. 1,500 kg - Height: 1,950 mm - Integrated hydraulics in the press frame - Hydraulic tank: 100 L - Monitored vertical safety door for the pressing area - Pressure, position, and speed adjustable via SIEMENS S7-1200 - SIEMENS 9-inch touchscreen monitor - Safety technology provided by SICK (C-frame press, hydraulic press, laboratory press) Looking for a custom-fit machine? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these requirements. Our main strengths are special-purpose machine construction and press automation. We offer tailored hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.400 mm, skupna širina: 1.500 mm, skupna dolžina: 2.400 mm, stiskalna sila: 20 t, skupna masa: 2.000 kg, vrsta vhodnega toka: trifazni, širina krmilne omare: 80 mm, vhodna napetost: 400 V, dolžina elektro omare: 60 mm, moč: 22 kW (29,91 KM), vhodni tok: 32 A, temperatura okolja (min.): 10 °C, okoljska temperatura (maks.): 40 °C, vrsta nastavitve višine: hidravlični, Oprema: dokumentacija / priročnik, If the press does not exactly meet your requirements, simply request a tailor-made offer with just one click: Contact us for a customized quotation. HIDROBRASIL manufactures presses precisely according to your specifications at surprisingly affordable prices! ##### 20 T Tablet Press, C-Frame Press, Single-column Press, Manual Loading Press Machine type: Hydraulic C-Frame Press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical data: - Pressing force: max. 20 tons (at 250 bar) - Free stripping force: max. 20 kN - Pressure build-up time: max. 2 seconds (closed tool, steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor level: 800 mm - Overall height: approx. 2400 mm - Minimum hall height: 3,500 mm - Parallelism tolerance: +/- 0.1 mm at 20°C - Deflection: 0.3 mm/m (at max. closing force with 70% occupancy) - Total weight: approx. 2 tons - Travel speeds: Fast closing 120 mm/s, pressing speed 10 – 5 mm/s - Sound pressure level: max. 78 dB(A) measured at 15 m height at the operator’s panel in accordance with DIN 45635-T16-KL3 Hydraulics: - Number of press cylinders: 1 - Operating pressure: max. 250 bar - Pressure accuracy during press stroke: +/- 5 bar - Main pump: Gear pump approx. 10 L/min - Oil volume: approx. 150 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C Electrical: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total connection load: approx. 6 kW Control cabinet: - Protection rating: IP 54 - Reserve space: approx. 20% - Cooling: no - Internal lighting: no - Operating mode selector: lockable Equipment: - Light curtain: SICK/PILZ/SCHMERSAL - Position adjustment: via adjustable sensors - Pressure setting: 5 T to 20 T, adjustable via rotary controller - Two-hand operation: standard, optional foot pedal available - Table plate: tray design with 50 mm high rim and side drain - Control cabinet: mounted on the right side of the press, IP 54 protection class Function and operation: - Activation: via main switch - Pressure setting: via rotary controller - Cycle initiation: by two-hand control or optional foot pedal - Safety features: compliant with EU standards and accident prevention regulations (UVV) Special features: - Toolset includes: top die with 8 press plungers, 3-part bottom die Lhjdpfstv Ewdsx Afrjp - Press cycle: production of 8-12 pressed parts per minute possible - Hydraulic unit: completely removable for maintenance purposes Service and warranty: - Monitoring and inspection: in accordance with DIN ISO 16092-3-2018 - Customer service: based in Waibstadt or Gelsenkirchen - Documentation: compliant with CE standards --- Are you looking for a machine tailored to your needs? Contact us for an individual quotation.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021,