Rob Tot nakup rabljenega (5.414)

Stanje: rabljeno, Technical details: Welding current: 330A / 50% duty cycle, up to 210A / 100% duty cycle Protection class: IP23 Total power requirement: 13.8 kVA Machine weight approx.: 71 kg Machine dimensions: 0.95 x 0.60 x 0.90 m - MIG / MAG - Cooling type: water-cooled AF - Insulation class: B Gbjdpfx Agju Nwb Noysi - Power range: 3A / 20V to 330A / 34V - Wire diameter up to 1.6 mm Equipment: - Cooling unit Control via robot interface

Stanje: dober (rabljeno), Fronius interface Gsdpfx Agowbkf Teyjbi

Stanje: novo, Leto izdelave: 2026, Poultry Plucking Machine and Scalding Tank for Turkeys and Geese Poultry Machine SČP ROB *Time-saving when plucking larger quantities of poultry *The machine model can be adapted to the type of poultry (turkeys/geese or chickens) *Very easy to use and clean *Easy to move thanks to wheels mounted as standard *Connection tap for rinsing feathers with water Godpfx Asp At Rpogyobi *If the poultry is properly prepared beforehand, it will not be damaged during processing in the machine. 306.121, SČP ROB 60, max 20kg / 2 units, 60 pieces per hour, Dimensions: 1030x1050x950 mm, weight: 91 kg, 2.2 kW, 400V 307.220 Scalding Tank for Turkeys and Geese *For scalding larger poultry – turkeys and geese *Processing 2–4 birds at the same time *Scalding time for turkeys and geese – 7 minutes at 72°–74°C *Safe operation and easy cleaning *Easy temperature control via electronic thermostat *The thermostat reliably maintains the selected water temperature *Maximum water temperature in the tank: 90°C *Built-in drain tap for emptying water *Mobile on wheels 307.220 KOH, 120L, max. temp. 90°C Dimensions: 1000x1380x1050 mm, weight: 318 kg, 10kW, 400V

Stanje: novo, Leto izdelave: 2022, Bandwidth: 150 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Gjdpfogr Ufhox Agyjbi Auxiliary table: 330 mm x 330 mm Veneer sanding attachment: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 810 mm Weight: 290 kg

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 3000 mm Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Sanding drum diameter: 60 mm / 100 mm / 120 mm Gsdpfogtdpujx Agyebi Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Weight: 310 kg

Stanje: rabljeno, Leto izdelave: 1990, Rabljeni stroj Leto izdelave: 1990 Oprema in tehnični podatki: - Avtomatski dovod robnega traku - Lepilni sistem s kartušo - Pritiskalni agregat s 4 valji - Enota za čelno žaganje - Enota za rezkanje poravnave - Kombinirana enota za poravnano/posneto/radijsko rezkanje - Radijski strgalnik - Polirni agregat - Debelina robnega traku 0,3 - 20 mm - Največja višina robnega traku 66 mm - Najmanjša dolžina robnega traku 200 mm - Podajalna hitrost 8/16 ali 12/24 m/min Gbodoyncpvopfx Agysi Razpoložljivost: takoj Skladišče: 63934 Röllbach

Stanje: novo, Oscilirajoči tračni brusilnik Močna izvedba za profesionalne obrtnike Električni priklop: 400 V Moč motorja: 3 kW Moč oscilacijskega motorja: 0,18 kW Dolžina traku: 2600 mm Širina traku: 200 mm Velikost mize: 930/300 mm Potrebni prostor: pribl. 1600/700 mm Teža: pribl. 280 kg Naprava za krožno brušenje z oporno mizo: 400/250 mm Gbeds Dxrgepfx Agyji Zagozdna letev z merilno skalo Agregat nagiben do 45° z ročnim kolesom Nastavitev višine mize z ročico Valji DM 120 mm Centralni priključek za odsesavanje DM 140 mm

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Gedpec S Di Rsfx Agyjbi Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Gjdpfefbr S Rox Agyjbi Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm - Thickness min. 6 mm Gbjdpfx Agebahd Esyoi Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!) Gbjdpfx Aec Tmygegyoi

Stanje: novo, Deburring machine Gjdpfxjb E Dc Hj Agysbi Make: Assfalg Model: FS 5 Condition: New machine Speed: 2,800 rpm Max. chamfer width: 3 mm Standard equipment includes: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating manual

Stanje: novo, Deburring machine Manufacturer: Assfalg Model: AF 165 Gsdodurxnspfx Agyjbi Condition: New machine Speed: 2,800 rpm Maximum chamfer width: 1 mm Standard equipment includes: - Special flap grinding wheel K80-ST - Extraction nozzle - Operating manual

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min Gbjdpfx Aowx Aaqegyei - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Stanje: novo, DM1100 C Edge Rounding Machine for Laser, Plasma, and Punched Parts The DM1100 C performs edge rounding and deburring of sharp burrs on both inner and outer edges of steel, stainless steel or aluminum parts after laser cutting, shearing, or punching processes. The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks, providing uniform edge rounding for the entire product. A key advantage of this machine is its ability to deburr products with protective surface film without damaging the foil – only the edges are processed. Excellent processing of parts in a wide range of dimensions, from small parts (50 x 50 mm) up to 1100 mm. Technical Data – DM1100 C Gsded Evcwepfx Agyobi Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Power consumption (A): 13 Extraction port per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Stanje: novo, Edge sanding machine Bernardo HV 80 OSZI Work table: 850 x 300 mm Table height adjustment: 90 mm Belt length: 2510 mm Belt width: 150 mm Sanding belt back panel: 950 x 200 mm Sanding unit lockable: 90° / 0° Belt speed: 16 m/sec Additional table: 300 x 250 mm Extraction connection: Ø100 mm Roller diameter: 110 mm Godpfxod Tb U Se Agyebi Motor output (continuous duty S1 100%): 1.5 kW (2.0 HP) Motor input power (intermittent duty S6 40%): 2.1 kW (2.8 HP) Voltage: 400 V Machine dimensions (W x D x H): 1400 x 680 x 1220 mm Weight: approx. 148 kg

Stanje: dober (rabljeno), Dvojnosni profilirni stroj, stroj za obdelavo robov, motor za zarezovanje, motor za odrezovanje, frezalni motor, motor vretena - Moč: 0,4 kW 12000 o/min pri 200 Hz - Moč: 0,60 kW 16500 o/min pri 300 Hz - Z obratnimi rezkarji z izmenljivimi ploščicami Gbsdpfx Agjb A Igpeyei - Količina: na voljo so 3 motorji - Cena: na kos - Teža: 6 kg/kos

Stanje: novo, Leto izdelave: 2026, Debarking and Chamfering Machine ECS500 / ECS500 E • Weight: 150kg / 250kg • Drive: PTO hub drive / Electric three-phase motor 5.5kW • Dimensions (LxWxH): 100cm x 90cm x 155cm • 3-point hitch for tractor • Knife disc diameter: 500mm Gbsdpfxer D Nk Nj Agyji • Knives are resharpenable and replaceable Price: €5,400 / €6,700

Stanje: rabljeno, Leto izdelave: 2010, Stroj deluje brezhibno, sprednja lepilna enota potrebuje čiščenje. Popolnoma funkcionalen Gedpfjx Hqdmsx Agyobi Leto izdelave: 2010 Rezalni nož za radij Ploščati rezalni nož Čistilna enota Spojni rezkar do 3 mm Rezkalna enota za nesting Pnevmatska zapora za vložke Poliranje Št. stroja: 200.07.011.10

Stanje: pripravljen za uporabo (rabljen), Dowel Cutting and Chamfering Machine Manufacturer: Löser Model: AA 200 Bench-top machine for the production of wooden dowels, designed for efficient cutting to length and chamfering of dowel rods / round bars. The dowel cutting and chamfering machine type AA 200 is a machine with low to medium capacity. It can cut and chamfer round bars made of wood, plastic, hard paper, and other materials. The dowel length is adjustable between 20 and 150 mm, set using an adjustment scale. The chamfer size can be set as required. The machine comes standard with a magazine ring, allowing the operator to run multiple machines simultaneously or perform other tasks. The machine features a solid, torsion-resistant cast iron frame. Additional advantages include very easy operation, simple maintenance, and easily accessible lubrication points. Technical data: - For dowel diameters approx. 6–13 mm - Minimum cutting length: 15 mm Gbsdpjwmpvhjfx Agysi - Maximum cutting length: 150 mm - Operating capacity: approx. 2000 pieces per hour - Weight: 53 kg (bench machine) Includes adapters for dowel diameters 8–9 mm, 10–11 mm, and 12–13 mm. Gear and chain have been replaced.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Cylinder 1350 + auger 55 mm Gbodpfx Agsr Avfvjyei Year of manufacture 2004 LD 24

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 576.509 km, moč: 243 kW (330,39 KM), prva registracija: 02/2019, vrsta goriva: dizel, velikost pnevmatike: 315/70 R22,5, konfiguracija osi: 4x2, medosna razdalja: 3.700 mm, gorivo: dizel, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: drugo, skupna dolžina: 6.160 mm, skupna širina: 2.500 mm, skupna višina: 3.200 mm, Leto izdelave: 2019, Oprema: ABS, airbag, električno upravljanje oken, klimatska naprava, servovolan, spojler, tempomat, = Dodatne možnosti in oprema = - Strešni usmernik zraka - Radio/CD predvajalnik - Spalna kabina Gbedpfx Agoyldh Ijysi - Senčnik = Opombe = PREVOZ DO ANTVERPNA 390 EVROV = Dodatne informacije = Tehnične informacije Število valjev: 6 Prostornina motorja: 10.677 ccm Konfiguracija osi Dimenzije pnevmatik: 315/70 R22,5 Sprednja os: Največja obremenitev osi: 7.500 kg; Vzmetenje: parabolične vzmeti Zadnja os: Dvojna montaža; Največja obremenitev osi: 11.500 kg; Vzmetenje: zračno vzmetenje Teže Lastna teža: 6.987 kg Nosilnost: 12.013 kg Skupna dovoljena masa: 19.000 kg Vzdrževanje, zgodovina in stanje Tehnični pregled: veljaven do 02.2027 Tehnično stanje: zelo dobro Optično stanje: zelo dobro Identifikacija Referenčna številka: 31

Stanje: zelo dobro (rabljeno), naprava za prevzem pri lastniku: Gbedpeyhzxgjfx Agyoi Green Factory Zdunowo 48 09-142 Załuski

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Naprodaj je ta lepa robna lepilka znamke Brandt. Stroj si je mogoče ogledati in preizkusiti na lokaciji. O stroju: Kap agregat Predgretje robu Poravnalni žagalni agregat Profilni rezkar zgoraj/spodaj Strgalo zgoraj/spodaj Polirni agregat Gsdpfx Aeykindjgyobi

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 572 h, vrsta goriva: električni, Genie GS1932 Škarjasto dvigalo / Scissor Lift 8M delovne višine, električno, 2013, pregledan do 9-26 Video se lahko pošlje preko Whatsappa. Neprekinjena zaloga, glejte spletno stran. Cene so EXW Nuland. Van de Wert Trading B.V. ima različno zalogo strojev, tovornjakov, prikolic in priključkov. Gsdpfxeyi Suks Agysbi Vse naše dobave so po trgovinskih cenah v stanju AS-IS, brez garancij (glejte naše splošne pogoje). Za ogled in/ali testno vožnjo se lahko dogovorite brez obveznosti. Pokličite vnaprej, ker nismo stalno prisotni na lokaciji. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland