Rob Glodalica nakup rabljenega (4.951)

Stanje: rabljeno, Wema Probst profile milling machine Main motor: 11 kW Rodpfx Aoc N N U Njg Tsp Dismantled and ready for loading

Stanje: dober (rabljeno), Fronius interface Rsdpfx Agjwbkf Ts Tsp

Stanje: rabljeno, Leto izdelave: 1990, Rabljeni stroj Leto izdelave: 1990 Oprema in tehnični podatki: Samodejno podajanje robnega traku Sistem za lepilo – vložek Pritisna enota s 4 valji Enota za kapno žago Enota za poravnavanje z rezkanjem Kombinirana rezkalna enota za poravnavo/posnetje/radius Radius strgalo Rodjyncpvjpfx Ag Tjp Polirna enota Debelina robnega materiala: 0,3 - 20 mm Največja višina robnega traku: 66 mm Minimalna dolžina robnega traku: 200 mm Pomik: 8/16 ali 12/24 m/min Razpoložljivost: Kratkoročno Mesto skladiščenja: Röllbach

Stanje: novo, Oscilirajoči tračni brusilnik Močna izvedba za profesionalne obrtnike Električni priklop: 400 V Moč motorja: 3 kW Moč oscilacijskega motorja: 0,18 kW Dolžina traku: 2600 mm Širina traku: 200 mm Velikost mize: 930/300 mm Potrebni prostor: pribl. 1600/700 mm Teža: pribl. 280 kg Naprava za krožno brušenje z oporno mizo: 400/250 mm Zagozdna letev z merilno skalo Agregat nagiben do 45° z ročnim kolesom Rsdpj Dxrgofx Ag Top Nastavitev višine mize z ročico Valji DM 120 mm Centralni priključek za odsesavanje DM 140 mm

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Rjdpfx Aec S Di Reg Tsp Heatable infeed fence Quick-change glue pot system ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. Rjdpfx Agefbr S Ro Tjp (We only respond to enquiries that include your full address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm - Thickness min. 6 mm Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm Rjdpfx Agsbahd Ej Tjp

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Rjdsc Tmygepfx Ag Tep Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Deburring machine Make: Assfalg Model: FS 5 Condition: New machine Speed: 2,800 rpm Max. chamfer width: 3 mm Standard equipment includes: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts Rsdpfx Aob E Dc Hjg Tep - Chip drawer - Operating manual

Stanje: novo, Deburring machine Manufacturer: Assfalg Model: AF 165 Condition: New machine Speed: 2,800 rpm Maximum chamfer width: 1 mm Standard equipment includes: - Special flap grinding wheel K80-ST - Extraction nozzle Rsdpfsdurxnsx Ag Tep - Operating manual

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Redpjwx Aaqjfx Ag Tjp Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Stanje: novo, DM1100 C Edge Rounding Machine for Laser, Plasma, and Punched Parts The DM1100 C performs edge rounding and deburring of sharp burrs on both inner and outer edges of steel, stainless steel or aluminum parts after laser cutting, shearing, or punching processes. Redpjd Evcwefx Ag Tep The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks, providing uniform edge rounding for the entire product. A key advantage of this machine is its ability to deburr products with protective surface film without damaging the foil – only the edges are processed. Excellent processing of parts in a wide range of dimensions, from small parts (50 x 50 mm) up to 1100 mm. Technical Data – DM1100 C Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Power consumption (A): 13 Extraction port per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Stanje: novo, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. The OD tube deburring machines remove burrs from tubes after cutting. This machine simultaneously removes internal and external burrs from tubes and profiles without rotating the tube material. Redpfxjd Ixbzo Ag Tsp Round, square, rectangular, and various other tube and profile shapes are deburred within just a few seconds. Thanks to the rotating brush, the operator does not need to rotate the tube. The tube clamping system enables precise insertion of the tubes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Rodjd Ixadepfx Ag Tsp Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: novo, Edge sanding machine Bernardo HV 80 OSZI Work table: 850 x 300 mm Table height adjustment: 90 mm Belt length: 2510 mm Belt width: 150 mm Sanding belt back panel: 950 x 200 mm Rjdpfxod Tb U So Ag Tep Sanding unit lockable: 90° / 0° Belt speed: 16 m/sec Additional table: 300 x 250 mm Extraction connection: Ø100 mm Roller diameter: 110 mm Motor output (continuous duty S1 100%): 1.5 kW (2.0 HP) Motor input power (intermittent duty S6 40%): 2.1 kW (2.8 HP) Voltage: 400 V Machine dimensions (W x D x H): 1400 x 680 x 1220 mm Weight: approx. 148 kg

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Mikron WF2S universal milling machine with 3-axis Elesta-Visulesta digital readout. Fixed angle table, SK 40 spindle taper. Machine is in very good, ready-to-operate condition, from a research institute. Can be demonstrated under power by prior arrangement. Redpfx Ajg Nw Rzjg Tsp

Stanje: dober (rabljeno), Dvojnosni profilirni stroj, stroj za obdelavo robov, motor za zarezovanje, motor za odrezovanje, frezalni motor, motor vretena - Moč: 0,4 kW 12000 o/min pri 200 Hz - Moč: 0,60 kW 16500 o/min pri 300 Hz - Z obratnimi rezkarji z izmenljivimi ploščicami - Količina: na voljo so 3 motorji - Cena: na kos Rodob A Igpepfx Ag Tep - Teža: 6 kg/kos

Stanje: novo, Leto izdelave: 2026, Debarking and Chamfering Machine ECS500 / ECS500 E • Weight: 150kg / 250kg • Drive: PTO hub drive / Electric three-phase motor 5.5kW • Dimensions (LxWxH): 100cm x 90cm x 155cm • 3-point hitch for tractor • Knife disc diameter: 500mm • Knives are resharpenable and replaceable Rjdpfx Agjr D Nk Ns Top Price: €5,400 / €6,700

Stanje: pripravljen za uporabo (rabljen), Dowel Cutting and Chamfering Machine Rsdpfxjwmpvho Ag Tjp Manufacturer: Löser Model: AA 200 Bench-top machine for the production of wooden dowels, designed for efficient cutting to length and chamfering of dowel rods / round bars. The dowel cutting and chamfering machine type AA 200 is a machine with low to medium capacity. It can cut and chamfer round bars made of wood, plastic, hard paper, and other materials. The dowel length is adjustable between 20 and 150 mm, set using an adjustment scale. The chamfer size can be set as required. The machine comes standard with a magazine ring, allowing the operator to run multiple machines simultaneously or perform other tasks. The machine features a solid, torsion-resistant cast iron frame. Additional advantages include very easy operation, simple maintenance, and easily accessible lubrication points. Technical data: - For dowel diameters approx. 6–13 mm - Minimum cutting length: 15 mm - Maximum cutting length: 150 mm - Operating capacity: approx. 2000 pieces per hour - Weight: 53 kg (bench machine) Includes adapters for dowel diameters 8–9 mm, 10–11 mm, and 12–13 mm. Gear and chain have been replaced.

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Cylinder 1350 + auger 55 mm Rsdpfx Agjr Avfve Tsp Year of manufacture 2004 LD 24

Leto izdelave: 1997, Stanje: rabljeno, številka stroja/vozila: B-388, FIL FA 160 bed-type milling machine with HEIDENHAIN TNC-360 control Rjdsgcuzrepfx Ag Tsp

Leto izdelave: 1980, Stanje: pripravljen za uporabo (rabljen), Max. speed: 2500 rpm, feed rate: 5–500 mm/min. Rodpfxefdzzyo Ag Tsp

Stanje: dober (rabljeno), Leto izdelave: 2001, CNC bed milling machine, manufacturer IBERIMEX-MVR Type: UH-1250, Year of manufacture: 2001 Control: Heidenhain TNC124 Travel distances: X 1250 mm, Y 500 mm, Z 460 mm Clamping table: 360 mm x 1800 mm Spindle taper: ISO50 Redpfx Aed Eraneg Top Machine with complete enclosure. For further technical details, please refer to the machine data sheet. Machine is in good condition.

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Roded Hintspfx Ag Tep Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Stanje: zelo dobro (rabljeno), naprava za prevzem pri lastniku: Green Factory Zdunowo 48 09-142 Załuski Rodpfx Ajyhzxgeg Tep