Robu Banding nakup rabljenega (9.622)

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270° Ffjdpfx Ajd Nt Rqjflet

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Ffsdodh Tfgspfx Aflst Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Fjdpocr T N Dsfx Afloft Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW)

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 Fsdpedt Rgvsfx Afljft VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: rabljeno, Chuck outer diameter: 250 mm Bore: 80 mm Chuck body height: 87 mm Ffsdpfxedan Ale Afljt Including externally stepped jaws and chuck key; internally stepped jaws are missing!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, The cartons are taken from the discharge conveyor of the folding box machine, stacked manually, and pushed onto the infeed conveyor of the US-2000 TRC 900. Inside the system, the stack is precisely aligned three times using the side guide and front stop, then pressed and banded. For the second banding operation, the front stop automatically shifts to the next position, which can be set via the display. A servo-driven conveyor motor allows for customized band tensioning, ensuring gentle banding of high-quality carton stacks with minimal edge damage. Processing capacity of up to 22 stacks per minute. Fjdpfxjvcyw Ae Aflsft

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 50 kg, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, dolžina obdelovanca (maks.): 2.500 mm, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Workpiece thickness: 12 - 40 mm Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Maximum workpiece weight: 50 kg Edging material (coil stock) - material thickness: 0.4 - 3 mm Maximum edge cross-section (plastic): 135 mm Maximum edge cross-section (veneer): 100 mm Maximum coil diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edge up to 3 mm Cross-processing speed: up to 30 m/min for panel sizing Cross-processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm Fjdpfx Afox Ezz Hsleft MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Standard milling unit: 6.6 kW EQUIPMENT Top/bottom separation agent spraying unit A3 gluing station with 2 rollers FF12 profile milling unit top/bottom, motors 12,000 rpm FA11 finishing unit top/bottom Continuously adjustable stop cams with max. cam stroke of 25 mm Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 202.01.006.16, hitrost pomika os X: 12 m/min, skupna dolžina: 3.940 mm, višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, Redno vzdrževano s strani proizvajalca. Vsa navodila za uporabo na voljo. Menjava zaradi prehoda na večji stroj. Ffodpfjxuik Sjx Aflet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Ffjdohy Tlrepfx Aflet Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Ta industrijska proizvodna linija HOMAG WEEKE je bila izdelana leta 2007. Ima celovito postavitev za obsežno obdelavo plošč in lepljenje robov, vključno z avtomatskimi nakladalnimi sistemi, centralnim valjčnim transporterjem, več moduli za lepljenje robov ter portalnim manipulatorjem za zlaganje. Idealna za optimizirano lesno proizvodnjo, zagotavlja učinkovito rokovanje in natančnost. Razmislite o priložnosti za nakup te industrijske linije HOMAG WEEKE. Kontaktirajte nas za več informacij o tem stroju. Vrste uporabe Kompletna proizvodnja Fodjx D Dq Sepfx Aflsft

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Single-Sided Edge Bander Advantage 400 Equipment: - Working length: 6700 mm - Release agent application top and bottom - Jointing milling unit 08.380 - Pre-heater (300 mm long), 2 x 1.5 kW, for pre-warming the workpiece edge - Gluing unit 283.1516, toothed belt drive - Strip detection to prevent gluing errors - End trimming unit for front and rear edges of workpiece - Reserve space for applying lubricant to high-gloss edges - Milling unit 08.0561 - Copy milling unit SKF-L - Profile scraper unit 08.519 - Spray nozzles (top and bottom) for applying cleaning agents - Self-sensing scraper unit 08.521 - Buffing unit 08.617-2 - Interior lighting - Electronic height adjustment of pressure beam (single-sided) Technical Data "Workpiece": - Min. workpiece length: 150 mm - Min. workpiece width: 65*/ 150 mm (*for max. workpiece thickness of 25 mm) - Min. workpiece thickness: 8 / 12* mm (*with profile scraper) - Max. workpiece thickness: 60 mm - Smallest workpiece: 65x380 / 150x380 x 19 mm - Allowance per workpiece edge: 0 - 5 mm* (*observe max. machining cross-section) - Workpiece shape: rectangular - Material: chipboard, MDF - Surface material: direct coating (melamine paper), paper, foil, veneer - Lateral protruding coating material: 0 mm Technical Data "Edge Material": Roll material without foil*: - Paper edges & plastic edges: 0.3 - 3.0 mm (*Foil only with additional equipment) - Veneer edges: 0.5 - 3.0 mm Veneer edge cross-section max.: 150 mm² Plastic edge cross-section max.: 180 mm² Pre-cut edge strips: 3.0 - 12.0 mm Strip cross-section max.: 600 mm² Min. edge height: 12 mm Max. edge height: 65 mm Max. upper edge overhang: 2 mm Edge profiles: - Paper edge approx. 0.4 mm (15° chamfer) - Plastic edge up to 3.0 mm (radius depends on tool) - Strip up to 12 mm (flush milling) Technical Data "Machine": Working length: 6700 mm Feed speed: 20 m/min for Advantage 400 Constant workpiece projection from chain track: 35 mm + edge thickness Max. trimming cross-section: 520 mm² Min. pass-through width (with 35 mm projection): 65 mm Min. workpiece length in feed direction: 150 mm Fedpfeitu Eaox Afloft Base height (top of chain track): 900 mm Unit side: left in feed direction Control voltage: 24 V DC / 230 V AC Mains voltage: 3/N/PE, 400/230 V, 50 Hz, +/-5% (Residual current device (RCD) not applicable) Machine Control ICOS Expert Features: - PC-based control system with integrated PLC and electronic line control - Simple, process-oriented program creation - Navigation and operation via touch screen - Program memory for up to 1,000 programs - Program number: 3-digit numeric - Control system prepared for service portal Technical Data Control:* - Panel PC with integrated 15" TFT display, with touch screen - USB port - Fast EtherCAT interface (fieldbus) - Ethernet network connection RJ45 in the control cabinet - Operating system: Windows with TwinCAT system for real-time control Note: The technical data and descriptions are based on the original order confirmation. Data is provided for information only and is not binding. Condition: - Machine fully overhauled - New pressure belt - New feed chain - New tracing rollers and post-processing tools

Stanje: novo, številka stroja/vozila: 7-KZM2, Edge banding machine for gluing ABS and PVC edges onto straight surfaces. The machine features an automatic panel feed and applies the adhesive directly onto the panels. Suitable for edge thicknesses from 0.4 to 3 mm and panel thicknesses from 10 to 45 mm. It automatically trims edge overhangs at both ends of the panel and mills the excess on the top and bottom flush or with a radius. Mechanical digital displays for panel thickness, edge thickness, and milling units are included as standard. Electronic glue temperature control with digital thermometer. Table extensions for wider panels are included in the price. The machine is pneumatically operated. Adhesive granulate is melted in a heated tank. Overhead control panel for convenient operation. Technical specifications: Table dimensions: 1400 x 600 mm Table extension: up to 500 mm Veneer roll holder diameter: 600 mm Fedovw Ea Eepfx Aflsft Panel thickness: 10 – 45 mm Minimum workpiece size LxW: 300 x 90 mm Feed speed: 5 m/min Extraction port diameter: 120 mm Total motor output: 3.2 kW S6 (2.4 kW S1) Heating power: 1260 W Compressed air connection: 6.5 bar Weight: 410 kg Optional accessories: Roll holder with 800 mm diameter Mobility kit

Stanje: rabljeno, Holz Her Sprint 1312 FÜ + PU Fedpfx Aex Eilqjflsft močna izvedba – debelina robov 0,4 - 12 mm SPS zaslonsko upravljanje Predrezkalna enota za pripravo pred lepljenjem Popolnoma avtomatski podajalnik robnega materiala za rolo in trak Lepilna postaja za kartuše + PU-lepljenje samodejna testna šoba Višina obdelovanca 6-55 mm Kap enota za rolo in trak do 12 mm debeline robu z nastavljivim naklonom kap žage od 0-10° Rezkalna enota, poravnava do 12 mm, rezkanje radijev – fazno rezkanje – 15° MOT – 4 osi Strgalska enota za faze in radije z 2 pnevmatskima nosilcema strgal pnevmatsko vklapljanje in izklapljanje Površinska strgalska enota – finish Sistem za pršenje – PU Stroj v ODLIČNEM STANJU iz zaloge Lieboch

Stanje: zelo dobro (rabljeno), SCM Contura in excellent condition. Ffsdpfxst E T I Ns Aflet

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Ffsdpfxsc S Di Rs Afljt Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: rabljeno, Leto izdelave: 1997, HolzHer Robna lepilka 1436SE Leto izdelave: 1997 -PVC Primus, 3 mm PVC sistem s kartušami -Lepljenje robov, poravnalno žaganje, poravnalno rezkanje, fazno rezkanje, radiusno rezkanje -Strgalo, polirna enota -Mere: 4700 mm x 1400 mm; višina: 1650 mm -Teža: 1300 kg -Delovne mere: Dolžina 4500 mm Globina 1020 mm Višina 1630 mm -Priključek: 140 mm Ø -Širina obdelovanca: min. 60 mm -Podaljšana hitrost: 11 m/min Fsdpfxswv Uq Aj Aflsft -6 bar -400 V stisnjen zrak -Deblina roba: 8 mm pri trakovih, 2 mm pri roli -BREZ predrezkalne enote

Stanje: novo, Leto izdelave: 2025, Machine neuve Année de fabrication : 2025 Compacte et flexible sur un espace très réduit. Sur seulement 2,13 m de longueur, les pièces reçoivent leur finition ici. Équipée d’un moteur haute fréquence de 1,1 kW, d’un groupe d'assemblage avec fraise spirale garnie de diamant, d’un module d'encollage avec revêtement Téflon, d’un groupe de pré-découpage et d’un module de fraisage multifonction HF. 2 emplacements libres pour unités de finition, comme par exemple une lame à tirer et une unité de polissage. Utilisation simple via écran tactile couleur 3,5''. Données techniques Ffsdex Sttuspfx Aflst Longueur machine : 2 122 mm Épaisseur des pièces : 10–45 mm Largeur des pièces (min) : env. 120 mm Épaisseur des chants : 0,4 – 2,0 mm Hauteur des chants (max) : = hauteur pièce + 4 mm (2+2) Raccordement électrique : 400 V Puissance totale raccordée : 3,6 kW Avance : 6,5 m/min Connexion pneumatique : 6 bars Poids net : env. 490 kg Options : Unité lame à tirer Outils diamant hauteur = 45 mm Emplacement : Flörsheim Disponibilité : court terme

Stanje: novo, hitrost pomika os X: 7 m/min, višina obdelovanca (maks.): 50 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, With corner copying, for plastic edging from 0.4 to 3 mm, solid wood edging up to 3 mm, and workpieces from 8 to 50 mm, with pneumatic adjustment Panel thickness: 8 – 50 mm Edge thickness: 0.4–3 mm (coil material) Pre-milling: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Top equipment for high productivity in a compact footprint! Intuitive operation via the eye-S control and 10" touchscreen: HMI Maestro Active Edge; Graphical display of all processing units and their operational status; Graphical simulation of processing tasks; Control of all processing units; Regulation of glue pot temperature; Assistance functions for machine setup according to the processing program; Error diagnostics for quick resolution of simple faults; Statistics on processing parameters; USB port; Prepared for network connection; Prepared for Industry 4.0 with API REST data transfer protocol Outstanding access to working units thanks to the large hood, providing both protection and noise reduction Monoblock steel construction ensures high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Saw-trimming unit with corner rounding (me 35 tr s): For trimming the edge as well as rounding corners on the top and bottom; When applying solid wood edges, trimming is done using the radius cutter; High-frequency motor with 12,000 rpm; Saw blade Ø125mm Z12 Panel feed via feed chain with rubber sliding shoes Extendable workpiece support Adjustment of the infeed fence by spacer plates Dimensions and Weights Length (product): approx. 3314 mm Width/Depth (product): approx. 1085 mm Height (product): approx. 1300 mm Weight (net): approx. 623 kg Flush-radius milling unit Flush-radius milling unit drive power: 2 x 0.35 kW Flush-radius milling unit cutter diameter: HM 55.3 mm Flush-radius milling unit cutter speed: 12,000 rpm Flush-radius milling unit extraction port diameter: 60 mm Flush-radius milling unit number of extraction ports: 2 Corner copying unit Corner copying unit drive power: 0.35 kW Corner copying unit tool diameter: 58 mm Corner copying unit speed: 12,000 rpm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Glue unit Glue pot drive power: 0.25 kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60 mm Glue pot filling capacity: 0.8 kg Pneumatic connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed drive power: 0.55 kW Feed speed: 7 m/min Edging Edge thickness coil material: 0.4 – 3.0 mm Pre-milling unit Pre-milling unit extraction port Ø: 2 x 80 mm Pre-milling unit drive power: 3 kW Pre-milling unit cutter speed: 7,200 rpm Fedpsxxvanefx Aflsft Pre-milling unit diamond cutter Ø: 80 mm Pre-milling unit cutter height: 56 mm Pre-milling unit material removal: 0.5 / 1 / 1.5 / 2 mm Scraper units Radius scraper: 2 mm Buffing unit Buffing unit drive power: 2 x 0.14 kW Buffing unit speed: 2,800 rpm Workpiece Workpiece thickness: 8 – 50 mm Workpiece length min.: 120 mm Workpiece width min.: 110 mm

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Ffedpfxol D Rp Es Aflot Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.774 mm, največja debelina roba: 3 mm, skupna masa: 842 kg, višina plošče: 50 mm, For plastic edging from 0.4 – 3 mm, solid wood edging up to 5 mm, and workpieces from 8 – 50 mm Panel thickness: 8 – 50 mm Edging thickness: 0.4 – 3 mm (coil material) Jointing unit: Yes Radius trimming unit: Yes Scraper: Yes Buffing unit: Yes Top features for high productivity in a compact footprint! Intuitive operation with the eye-S control and 10” large touchscreen: HMI Maestro Active Edge Graphic representation of all processing units and their operating status Graphic simulation of processing operations Control of all processing units Regulation of glue pot temperature Assistance functions for setting up the machine according to the processing program Error diagnosis for quick resolution of simple faults Statistics on processing parameters USB port Prepared for network connection Excellent accessibility to working units thanks to the large hood, providing protection and noise reduction Automatic unit positioning when changing panel thickness Panel feed via feed chain with rubber glide shoes Quality Made in Italy Equipment details 10” touchscreen control panel Optimum machine management via the new 10” touchscreen control panel with Maestro active edge, displaying all machine functions graphically Pre-milling unit Two DIA pre-milling cutters Glue station The glue is rapidly and evenly heated by heating rods located both in the glue pot and on the glue application roller Automatic temperature reduction during longer machine idle times Glue tank is Teflon-coated for easy glue change Device for recycling unused glue Automatic application of edging strips with guillotine for edges up to 3 mm Turntable with Ø 730 mm Self-lubrication of the glue pot Quick-change kit for glue tank Flush/radius trimming unit With tracing rollers in horizontal and vertical direction for optimum tool positioning Equipped with combination trimming tool Ø 55.3 mm for flush trimming of edges up to 5 mm and radius edges up to 2 mm Precise adjustment by means of 2 digital displays With chip extraction Surface scraper Absolute cleanliness for a perfect finish on the workpiece surface With rotary copy device Buffing unit Driven by two independent motors, adjustable in tilt and height For perfect cleaning and polishing of panel edges Radius scraper With numerical position display For perfect finishing of plastic edges Fsdpfx Ajxxuvbjflsft With device to retract the unit when not needed Edge magazine For automatic application of strip edging Solid wood strip edging is automatically loaded and synchronized with the panel feeding

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Ffsdpfx Aelc Ewisfljt Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 45 mm, največja debelina roba: 3 mm, moč rezkalne enote: 750 W, vrsta vhodnega toka: trifazni, kapaciteta rezervoarja: 1 l, Automatic edge banding machine with chain feed and jointing milling unit Demo machine, year of manufacture 2022 Features: Touch ME "7" touchscreen control Fjdpfxjwa Ag Tj Afljft Quick-change glue pot kit Multifunctional end trimming unit Radius scraper unit Flat scraper unit LED interior lighting

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. Ffodpfofbr S Rox Aflot • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Ffjdec Tmygspfx Afljt Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Edge banding machine SCM Model: Olympic 500 HP 'T-ER2' Offer Type: LEASE RETURN, Used Machine Availability: Immediate Location: In stock Condition: As new Year of manufacture: 2023 GENERAL INFORMATION: A complete and versatile edge banding machine designed for small and medium-sized businesses, capable of processing a wide range of materials with a high quality standard while requiring minimal space. The SCM Olympic 500 is equipped with an electronic adjustment device and allows the machining of 2 radii, each with its own tool, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for human-machine interface (HMI) • Maestro connect: preconfigured for later installation without gateway • Dual radius machining, chamfering on all units with multi-knife tools - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacer at infeed KIT “SAV€NERGY” Internal lighting for the cabin and gluing area “Nesting” sensing roller KIT “Separating agent” spray unit “AAR” Spray unit for post-processing the edge Spray unit for sensitive edges Jointing cutter unit “RT-V1” “EASY SIZE” device – electronic quick setting for jointing cutter unit Glue application unit “VC-VM” Ceramic infrared preheating lamp for workpieces Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius milling unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3’ – automatic switching between straight / R/R positions for the “Round 2-A Multiedge 1R” unit Radius scraper unit "RAS-HP Multiedge 2R" Flat scraper unit “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm Fedpfxeq A Tyzj Afljft SPECIAL LEASE RETURN PRICE!!