Robu Banding nakup rabljenega (3.731)

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting capacity flat: 300 x 260 mm Saw blade length: 3920 x 34 x 1.1 mm Table height: 780 mm Blade speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m Iodpfx Asxfwbtsl Nsia Unused exhibition machine!!!! 2-column high-performance automatic bandsaw of the SBS series • Modern SNC 20 control in CNC configuration • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic blade tension • Adjustable clamping pressure • Double vice (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, electrically and hydraulically prepared • Chip conveyor The SNC 20 control enables convenient and user-friendly input of up to 20 different sawing jobs (length and quantity). When the desired dimensions are entered, the control automatically calculates the cutting waste and the number of feed cycles. In addition, the error code display system allows for fast troubleshooting. Including band run-off detection (€1,800)

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting dimensions flat: 300 x 260 mm Saw band dimensions: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL PROMOTIONAL PRICE!!!! 2-column high-performance bandsaw automats from the SBS series Iiedefb Nbfspfx Al Nea The SBS series impresses with sophisticated engineering, high quality, durability, and an unrivalled, comprehensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping force • Double vice (in front and behind the band) • Creep mode for positioning • Electrical and hydraulic bundle clamping preparation • Chip conveyor The SNC 20 control enables convenient and straightforward programming of up to 20 different sawing operations (length and quantity). When the target dimension is entered, the control system automatically calculates the saw kerf and the number of feed cycles. In addition, the error code display system allows for quick fault diagnosis and troubleshooting.

Stanje: novo, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 – 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series impresses with proven technology, superior quality, durability, and an unrivalled range of standard features. Iodpfx Alefb Nbgs Neia • Modern SNC 20 control system (CNC version) • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure regulation • Double clamping vice (in front of and behind the band) • Creep speed for positioning • Electrically and hydraulically pre-equipped bundle clamping • Swarf conveyor The SNC 20 control system allows for convenient and straightforward programming of up to 20 different sawing tasks (length and quantity). When entering the desired length, the control system automatically calculates cut loss and the number of feed strokes required. The error code display system also enables quick error analysis and troubleshooting.

Stanje: novo, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Iiedpfx Alofg E Hvo Nea Cutting diameter flat: 460 x 460 mm Saw band length: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series stands out for its advanced technology, high quality, durability, and an exceptionally extensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) • Jog mode for positioning • Bundle clamping, electrically and hydraulically prepared • Chip conveyor The SNC 20 control enables easy and intuitive input of up to 20 different sawing jobs (length and quantity). Upon entering the required dimensions, the control automatically calculates the saw kerf and the number of feed cycles. Additionally, the error code display system provides rapid fault analysis and troubleshooting.

Stanje: novo, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Iisdpfx Asfu Nbbel Noa Cutting capacity at 90 degrees: rectangular 610 x 450 mm Saw blade length 5320 x 34 x 1.1 mm Blade speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height sensor (automatic cut start detection) Automatic feed unit via ball screw incremental feed with automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure switch-off in idle mode Mechanical swarf removal brush, feed vice opens on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple cutting jobs with various cutting lengths and quantities. Automatic feed unit, 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Fully hydraulic control of saw frame and clamping devices Selection of 3 different material feed rates Visualization of the entire workflow with simple data entry

Stanje: novo, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, smooth and ergonomic sawing Specially developed for cutting profiles, beams, and solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting with the K-tech 800H model, the machine is equipped as standard with an additional horizontal clamping vise. The interaction of the hydraulic saw frame lowering, material positioning, and the pusher system is controlled by CNC. The machines come standard with the environmentally friendly 'B&S Clean Cut cutting system' with minimal quantity lubrication, saving on cleaning effort and conserving resources. CNC Control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feed and positioning unit, is fitted with 'double-opening clamping jaws' controlled hydraulically. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is constructed separately and is guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust gear motor. Iodpfx Alofgyife Njia

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirements approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H, with push system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. Iiodpjfgyigefx Al Nea The machines come standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeder, and positioning system is equipped with "double-sided opening gripper jaws" that are hydraulically actuated. This ensures safe gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is built as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Control system: CNC Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.63 t Space required: approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) Iiedod Iipzopfx Al Nsa • Material height sensor (automatic cutting start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cutting! • Optimize workflows through CNC control Input options for various parameters such as quantity and material length, automatic offset calculation for the cutting channel • CNC control for 10 different sawing programs with 99 sub-programs each for different lengths and quantities (e.g. 1 sawing program with various section lengths) • Automatic feeding unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnants length 170 mm.

Stanje: novo, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Cutting range at 60 degrees: round 370 mm Iiedpofg E Hmsfx Al Nja Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Iedpfx Ajfg E Hnjl Nsia Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Band speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column double mitre bandsaw for fast cutting with Pusher System P15. Option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures seamless interaction of linear encoder and self-braking positioning motor in combination with reliable hydraulic braking via large-radial centre positioning. The work table is mounted on high-quality preloaded bearings, which ensure extremely smooth rotation. CNC control A CNC control enables programming of up to 90 cutting programs with different cutting lengths, quantities and mitre angles. Positioning system with double-sided clamps The B&S pusher system—feeding and positioning system—is equipped with double-sided hydraulic gripping tongs. This ensures secure gripping and transportation of materials and bundles deviating slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, ground rack, and a frequency-driven robust gearbox motor.

Stanje: novo, Cutting range at 90°: round 310 mm Cutting range at 90°: square 280 mm Cutting range at 90°: rectangular 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total connected load: 2.2 kW Machine weight approx. 0.99 t Space requirement approx. 1.85 x 2.2 x 2.0 m Iijdpfxjd Iipro Al Nja Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet operation with minimal vibration • Removable chip tray (disinfection) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Top access to saw, material and feed unit • Safety cover can be folded up • Fine feed adjustment • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different saw programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with various cut lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Iiedsd Iip Aepfx Al Nsa Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 250 Super VA-I MPS • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover (a). • Material height sensor (c). (Automatic cut start detection) • Frame and gearbox cast in one piece, very quiet cutting and low vibration • Removable chip tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering required quantity and length: material infeed, cutting process, and piece counting until the program is completed • MPS control for setting the required number of feed strokes • All important machine data is displayed on the LED display during the cutting process (power consumption, cutting time, quantity) • Entered data is stored in RAM memory • The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or by reverse feed function, repeatable 1 - 29 times, remaining workpiece length 210 mm

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Iijdpfx Ajupw R Aol Nja Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Hello, For sale: MebaEco 335 DGA band saw. Fully automatic machine with CNC control. The machine has been refurbished, is fully operational, and has been prepared for work by the authorized Meba bandsaw service in Poland. The machine has been inspected, and all parts requiring replacement or repair have been carefully identified and replaced. Below are the technical specifications of the bandsaw: Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Table height: 750 mm • Feed range: from 5 to 2300 mm per stroke • Cutting area at 90°: flat materials 500 x 335 mm • Cutting range at 45°: approximately 330 mm • Cutting area at 45°: flat materials 320 x 335 mm • Round cutting at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm Iodpsyzqv Ssfx Al Neia • Cutting speed: stepless adjustment from 15 to 150 m/min • Maximum material load: 250 kg/m • Total installed power: 3.0 kW Once programmed, the machine automatically feeds material for cutting using the feed vise. Additionally, you can observe the bandsaw in operation in the attached video. If you would like to see the machine in person, this is also possible. The saw is currently located in our warehouse. If you have any questions, please contact me by email :)

Stanje: dober (rabljeno), Leto izdelave: 1983, Potrebni prostor cca 1210 x 1000 x 2070 mm Teža - paletni sistem: 1000 kg Velikost mize: 800 x 820 mm MÖSSNER SSF/501 Vertikalna tračna žaga Velikost mize: 800 × 820 mm Pomik mize: cca 350 mm Iisdpfx Alsyxhg As Nea Višina reza pod vodilom: cca 400 mm Širina reza / izhod: cca 500 mm

Stanje: rabljeno, Leto izdelave: 2005, Tračna žaga AMADA HFA 400W Avtomat (avtomatsko podajanje materiala) Leto izdelave: 2005 Iedpfoyxplyex Al Noia Zaslon na dotik Maksimalen razpon rezanja: Palica Ø 420 mm Kvadrat 400 x 400 mm Zelo dobro stanje

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €9,210 Lease rate: €177.75 Saw frame: pivoting frame Saw blade dimensions: 3160 x 27 x 0.9 mm Infinitely variable blade speed: 20–100 m/min Cutting capacity 0° round: 270 mm Cutting capacity 0° square: 270 mm Cutting capacity 0° flat: 340 x 220 mm Cutting capacity 45° round: 230 mm, square: — Cutting capacity 60° round: 150 mm, square: — Cutting capacity -45° round: 180 mm, square: — Working height: 910 mm Hydraulic motor: 0.37 kW Main motor: 1.5 kW Coolant pump motor: 0.12 kW Length: 1,730 mm Width: 770 mm Height: 1,460 mm Weight: 476 kg MITER ANGLE ADJUSTABLE VIA DIGITAL DISPLAY Chip brush Control panel Pivoting frame Infinitely adjustable lowering via hydraulic cylinder Hydraulic lifting of the saw frame Quick lowering with automatic switch to working speed via sensor pin Iiedpjwirktofx Al Nsa Mechanical vise with quick clamping Coolant system Machine base Chip collection tray Operating manual in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw blades available upon request

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Iijdpswiqndsfx Al Noa Stock number: 6254 Delivery time: immediate, subject to prior sale Country of origin: Italy Price: €15,040 Lease rate: €288.77 In stock: 1 Saw frame: double column guide Saw blade dimensions: 3270 x 27 x 0.9 mm Band speed: 40/80 m/min Cutting capacity 0° round: 300 mm Cutting capacity 0° square: 300 mm Cutting capacity 0° flat: 350 x 260 mm Cutting capacity 45° round: 210 mm, square: 210 mm Cutting capacity 60° round: 110 mm, square: 110 mm Working height: 830 mm Motor: 1.5 kW Length: 1,500 mm Width: 1,600 mm Height: 1,900 mm Weight: 590 kg Hydraulic vise INCLUDING ADJUSTABLE CLAMPING PRESSURE Lowering and raising of the saw frame via hydraulic cylinder Quick lowering Automatic rapid lowering and lifting, controlled by feeler pin Adjustable cutting pressure according to cross-section and material quality Double safety pressure buttons for cycle start 2 speeds Coolant system _CUTTING CYCLE_ Vise closes; rapid hydraulic lowering of the saw frame; blade rotation and coolant pump start; lowering at working speed; end of cut; blade rotation and coolant pump stop; rapid raising of the saw frame; stop lifting of the saw frame; vise opens Manufacturer’s warranty until 31/12/2026 OPTIONS: Roller conveyors and saw bands on request

Stanje: novo, Leto izdelave: 2026, Manual bandsaw machine for cuts from 0° to 60° to the right. Hydraulic blade tensioning, bow handle with control button. Combination blade guide with lateral bearings. Carbide cutting inserts and an upper bearing. Manual cutting or semi-automatic cutting possible; the bow's own weight is regulated via hydraulic brakes, then the bow is manually raised again to the desired position. Manual vice for quick and precise clamping of the workpiece. Bow rotation from 0° to 60° to the right with locking positions, precise angle adjustment, manual clamp with quick-release lever. Millimeter-graded scale rod. Coolant tank integrated into the upper side of the machine base with drain nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Iijdpfegculvsx Al Nsa Control voltage 24 VAC, main switch and control system. Maximum current and short-circuit protection. Connection voltage: 400V/50Hz/3Ph standard. Machine color: yellow RAL 1018 and grey RAL 7036. You are welcome to visit the desired machine in our production/demo hall at any time. Please feel free to contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Condition new Delivery time approx. 14 - 16 weeks from order Country of origin Turkey Price €11,100 Leasing rate €213.12 Saw frame pivoting frame Saw band dimensions 3660x27x0.9 mm Infinitely variable band speed 20-100 m/min Cutting capacity 0° round 320 mm Cutting capacity 0° square 300 mm Cutting capacity 0° flat 320x300 mm Working height 640 mm Hydraulic motor 0.37 kW Motor 2.2 kW Coolant pump motor 0.12 kW Length 1900 mm Width 850 mm Iisdpswirhfofx Al Nsa Height 1300 mm Weight 770 kg Roller feed with manually adjustable stop with limit switch Chip brush Control panel Height adjustment via sensor bar with limit switch Hydromechanical band tension Hydraulic vise Coolant pump Saw band Safety switch 1.2 meter roller conveyor Operating manual in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw bands on request

Stanje: zelo dobro (rabljeno), J4 Tunnel oven from year 2012, disassembled and ready for shipment. For more information, send an email. Iisdjw Elytjpfx Al Nsa

Stanje: rabljeno, Leto izdelave: 1993, Hitrost rezanja: 15 - 125 m/min Iiodpfx Aleywzxcj Noa Rezkalni presek: 260 mm Dolžina tračne žage: 4.115 x 41 x 1,1 mm Širina reza: 260 x 260 mm Tračna žaga | KASTO - SSB 260 VA Stroj je v dobro vzdrževanem stanju. Upoštevajte, da so bili tehnični podatki prevzeti iz primerljivih strojev.

Stanje: rabljeno, Leto izdelave: 1989, Hitrost rezanja: 15 - 125 m/min Rezani presek: 260 mm² Dolžina žaginega traku: 4.115 x 41 x 1,1 mm Širina reza: 260 x 260 mm Tračna žaga | KASTO - SSB 260 VA Stroj je v dobro vzdrževanem stanju. Isdpfeywzw Sjx Al Neia Upoštevajte, da so tehnični podatki povzeti po primerljivih strojih.

Stanje: dober (rabljeno), Leto izdelave: 1997, Rabljena tračna žaga proizvajalca MEP Tip: Shark 260 Kapaciteta: 260 x 210 mm Vključuje 2 podajalnika Iodpfxsy A Ecco Al Noia

Stanje: rabljeno, Leto izdelave: 1997, Machine weight approx. 3 t Saw band dimensions (metric): 18' 4-1/2" x 1-1/2" x 0.050" Saw band dimensions (inch): 18' 4-1/2" x 1-1/2" x 0.050" Band width in mm: 41 Band length in mm: 5600 Band thickness in mm: 1.3 Automatic bandsaw (360 mm) SMA-REF-7091 Category: Bandsaws Manufacturer: Pehaka Model: PEHAKAMAT 360 ZP Year of manufacture: 2000 Saw blade: 5,600 x 41 x 1.3 mm Iisdpsv I Ercefx Al Nea Working range: 90° round: 360 mm 90° square: 360 x 360 mm Features: Roller conveyor 1,300 x 380 mm Hydraulic blade tensioning Dimensions: Weight: 3 t