Rob Sander

WESETSLINTNER KSM 260

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, dolžina brusnega traku: 2.600 mm, širina brusilnega traku: 200 mm, premer povezave za izpihovanje: 140 mm, višina brušenja: 200 mm, moč: 3 kW (4,08 KM), premer valja: 120 mm, Velika, a obenem prostoroma učinkovita izvedba z delovno širino 200 mm! Hitra nastavitev višine brusilne mize, vključno z omejevalnikom za poševne reze s skalo, nagib agregata s pomočjo ročnega kolesa. Električni priključek 400 V, moč motorja 3 kW (4,0 KM), nihajni motor 0,18 kW (0,25 KM). Dolžina pasu 2.600 mm, delovna širina 200 mm, velikost mize 930 x 300 mm, premer valjev D=120 mm, omejevalnik za poševne reze. Teža približno 280 kg, priključek za sesanje 140 mm. Priporočena maloprodajna cena 5.400, plus DDV. Gsdpfx Aszi Az Todkebr

Stanje: rabljeno, Leto izdelave: 2001, Širina udarne stene: 4000 mm Višina udarne stene: 1000 mm Zunanje dimenzije: 4600 x 1500 mm 2 x 1,5 kW motorja Skupni nazivni volumenski pretok: 7000 m³/h Odsesovalni priključki levo in desno s premerom 300 mm Lokacija skladišča: Garbsen Gedpfovvizksx Adkebr

Stanje: novo, Leto izdelave: 2026, Širina traku: 200 mm Dolžina traku: 2600 mm Oscilacija: da Brusni valji za zaobljenja: 1 Nagibno brusilno agregat: da Velikost mize: 930 mm x 300 mm Priključek za odsesavanje: 140 mm Moč motorja: 3 kW Dolžina stroja: 1700 mm Gjdpjyvz Riofx Adkobr Širina stroja: 700 mm Teža: 280 kg

Stanje: novo, Leto izdelave: 2026, skupna dolžina: 1.450 mm, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna masa: 500 kg, moč: 4,75 kW (6,46 KM), FC 120 ZK Working capacity: Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Current consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg Gedst D D Nzjpfx Adksbr

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Gbodeqt Dmyjpfx Adker Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 20281, Offer 23034 Technical specifications: - Max. grinding length approx.: 350 mm - Max. grinding width: 150 mm - Max. installation height with/without magnet: 150 / 210 mm - Grinding wheel stroke approx.: 200 mm - Clamping surface: 300 x 160 mm - Magnetic clamping plate: 250 x 150 mm - Grinding wheel dimensions approx.: 200 x 80 x 78 mm - Grinding wheel speed: 2800 rpm - Swivel range of grinding arm approx.: 180° Gbodpfx Adoklxwkokor - Manual arm clamping via clamping lever - Wet grinding system - Drive: 400 V / 1.85 kW - Required floor space approx.: W 850 x H 1650 x D 800 mm - Weight approx.: 350 kg

Stanje: novo, Leto izdelave: 2022, Dowel hole boring unit: no Drilling depth: 150 mm Gjdjgq Un Aopfx Adkobr Slot length: 180 mm Height adjustment travel: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Stanje: novo, – Polavtomatski – Hidravličen – 2 hitrosti Gbjdpfxeh Razfs Adkor – Dvojno poševno rezanje – Tlak žage hidravlično nastavljiv – Hlajenje – List žage 2730 x 27 x 0,9 mm – Nadzor s stopalko – Nujna zaustavitev – Dokumentacija – 400 V

Stanje: novo, Cutting diameter: 305 mm Saw band length: 3375 mm Cutting width: 350 mm Saw band dimensions: 3375 x 27 x 0.9 mm Gbjdou Dbvtepfx Adker Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° to the left and 45° to the right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Gbsdpfx Adsg A D Anoker Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm