Robnik Klešče nakup rabljenega (205)

Leto izdelave: 2019, stanje: rabljeno, skupna masa: 1.400 kg, težišče tovora: 600 mm, nosilnost: 12.000 kg, delovno območje: 2.200 mm, številka stroja/vozila: 449297, Proizvajalec: Durwen Tip: 805.5122-12.01 Pritrditev: Pin-tip / neposredna montaža Izvedba: klešče za bale s stranskim pomikom Leto izdelave: Mere: • Skupna širina: 2240 mm • Višina brez rešetke: 930 mm • Skupna višina z rešetko: 1200 mm • Notranja razdalja med nosilci: 530 mm Razpon odpiranja: • min: 200 mm • max: 2200 mm Kapaciteta / zmogljivost: • Nosilnost: 12000 kg • Težišče tovora: 600 mm Teže: • Lastna teža: 1400 kg • Prednji izsev: 450 mm Oprema: • Stranski pomik prisoten • Hidravlika popolnoma funkcionalna Hfsdpfx Asxw I E Hjfwef • Klešče Heavy-Duty izvedbe

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 314567.00, število vpenjalnih puš: 1, montažni premer: 30 mm, obseg vpenjanja: 30 mm, Vpenjalne puše / pokrovi za vpenjalne puše / podporna pušica za vpenjalno napravo novo - neuporabljeno 5 kosov pokrovov za vpenjalno pušo v velikosti Ø30, št. 314567.00 4 kosi vpenjalnih puš v velikosti Ø30,0 1 kos podporne pušice za vpenjalno pušo v velikosti Ø30 - za Reishauer RZ 301 / RZ 362 iz naše zaloge Cena / podrobnosti na zahtevo Pridržujemo si pravico do napak v vseh tehničnih podatkih. Prodajamo izključno v države Evropske unije. Hfsdpfx Afjwccp Hswof

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 105 kg, skupna višina: 1.400 mm, skupna dolžina: 1.850 mm, skupna širina: 1.150 mm, Ostalo Hidravlične škarje za drevesa z žago za Manitou Hfodpoyhhvzefx Afwsf Proizvajalec: Dorfmeister Tip: Prijemalo za les SS 550 Višina (mm): 1.400 Dolžina (mm): 1.850 Teža (kg): 105 Širina (mm): 1.150

Stanje: rabljeno, Spot welding tong with DALEX RS 17 controller and balancer Spot welding tong DALEX Type A 3139 Manufacturing No.: 98G 69757 Year of manufacture: 1998 Rated output at 50% duty cycle: 8 kVA Welding power max.: 22.4 kVA Open-circuit voltage: 2.9 Volt Electrode force max.: 200 daN Short-circuit current max.: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6 / 12.5 mm Electrode gap max.: 230 mm - Tong with water cooling - without cooling unit - cooling water requirement: 1.5 liters/min. - Suspension device Balancer DALEX Type D4-21 Weight of welding tong: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs Hjdpfxjyxrhde Afwsff PAS No.: 0413-410 Serial No.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Squeeze, hold, off, and pause times: each 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Pulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter adjustment: via arrow keys - with solenoid valve control - Current setting via phase angle control - Welding controller in sheet metal wall cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Stanje: rabljeno, Visokotlačna hidravlična enota do 630 bar WEBER tip E45 / 59600.0 Visokotlačna enota + hidravlične razpirne klešče, hidravlični razpiralec Leto izdelave 1988 / 1986 Hidravlična enota tip E45 / 59600.0 Obratovalni tlak max. 630 bar Pretok cca 2 l/min Prostornina rezervoarja cca 10 litrov Razpirna naprava – klešče WEBER tip SP30 / 59 198.0 Hfodpfxsdzp S Rs Afwjf Izteg = dolžina roke 340 mm Razpiralna razdalja max. 610 mm Razpirna sila v delovnem območju max. 132 kN Zapiralna sila 99 kN - Dvojna cev z hitrospojko Nazivna moč 0,9 kW Priključna napetost 220 V, 50 Hz Teža hidravlične enote cca 40 kg Teža razpirne naprave cca 25 kg Zelo dobro stanje Hidravlični gasilski reševalni komplet s hidravlično enoto in razpiralcem. Razpiralec je namenjen ustvarjanju reševalnih odprtin po prometnih nesrečah z razpiranjem. Lahko se uporablja tudi za stiskanje ali dvigovanje bremen. Vsestranski za uporabo zaradi večfunkcijskih čeljusti razpiralca iz odkovanega in kaljenega jekla.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, nosilnost: 1.500 kg, Objemalka za bale Stanje: pripravljena za uporabo in popolnoma funkcionalna Hfodjyzvl Ejpfx Afwef Tehnično stanje: dobro Opis: Leto 2018 Nosilnost 1500 kg Stranski pomik Razpon odprtja 650-2020 mm Širina 1320 mm Klešče 1000 mm Za Linde jambor 386 /391 standard ID OS1944

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, nosilnost: 1.600 kg, Objemka za bale Hodpfx Afjyzdfmowjff ISO razred: ISO razred 2 = 1.000 - 2.500 kg Stanje: Pripravljeno za uporabo in popolnoma delujoče Tehnično stanje: dobro Opis: Leto 2008, ISO 2A (41 cm), Nosilnost 1600 kg / 500 mm, Bočni pomik, Širina 1070 mm, Roke 1200 mm, ID OS1935

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, nosilnost: 4.000 kg, Objemka za bale Hfodpfx Aeyzdawsfwef ISO razred: ISO razred 3 = 2.500 - 4.999 kg Stanje: Pripravljeno za uporabo in popolnoma funkcionalno Tehnično stanje: dobro Opis: Leto 2017, ISO 3A (51 cm), Nosilnost 4000 kg, Stranski pomik, Širina 1450 mm, Razpon odpiranja 600-2380 mm, Kraki 1600 mm, ID OS1891

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, nosilnost: 4.000 kg, Spona za bale ISO razred: ISO razred 3 = 2.500 - 4.999 kg Hsdjyzdaqjpfx Afwoff Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Opis: Leto 2017, ISO 3A (51 cm), Kapaciteta 4000 kg, Stranski pomik, Širina 1450 mm, Obseg odpiranja 620-2380 mm, Klešče 1600 mm, ID OS1890.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, nosilnost: 5.000 kg, Objemka za bale Težišče tovora: 800 ISO razred: ISO razred 4 = 5.000 - 10.000 kg Hsdpfx Afsyzdakowjff Stanje: Pripravljen za uporabo in popolnoma delujoč Tehnično stanje: dobro Opis: Leto 2021 ISO 4A (61 cm) Nosilnost 5000 kg Stranski pomik Obseg odprtja 700-3100 mm Širina 2100 mm Klešče 1800 mm ID OS1889

Stanje: zelo dobro (rabljeno), Naprodaj komplet 4 profesionalnih klešč za stiskanje Tyco Electronics Premium CERTI-CRIMP, uporabljenih v elektronski industriji, avtomatizaciji in servisiranju kabelskih snopov. Oprema je z vso dokumentacijo (eDB kartice) – pripravljena za takojšnjo uporabo, vsaka klešča so namenjena za določen tip konektorjev. Hfodow Slhiepfx Afwof

Stanje: kot nova (razstavni stroj), Manufacturer: Busch Hfsdpjfbl Dfjfx Afwjf Model: Mink MV 0312B Motor: DS 400V Suction capacity: 290 m³/h Ultimate pressure: approx. 150 mbar (abs.) Delivery time: short notice

Stanje: rabljeno, Material clamp, material gripper, load clamp, carrying clamp, lifting clamp, block tongs Manufacturer: NORDGREIF Type 7548 Year of manufacture: 1997 Load capacity: 500 kg Hfedpfxjdz Spno Afwef Grip range: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective pads on gripping surfaces - Suitable for crane operation - With CE marking Own weight: 50 kg Good condition

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 656387.2, skupna masa: 180 kg, Point diameter: 8 mm Die depth: 1.20 mm Control dimension: 0.60 mm Hfedou Tuufopfx Afwjf Max. pressing force: 54 kN The clinching pliers from Tox Pressotechnik with servo drive are specifically designed for use in robotic systems and provide a precise and efficient solution for joining sheet metal and materials. With its advanced servo drive technology, it enables highly dynamic and controlled operation, making it ideal for integration into automated processes. The pliers are characterized by their robust construction and reliability, resulting in a durable and low-maintenance solution. Thanks to their flexibility and versatility, they are excellently suited for various industrial applications and help increase productivity and quality in manufacturing.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 656377.1, skupna masa: 170 kg, Nominal point diameter: 8 mm Die depth: 1 mm Dimension X: 0.90 mm Dimension X min.: 0.8 mm Dimension X max.: 0.95 mm Max. press force: 55 kN Hfedju Tuqtopfx Afwef Deflection constant: 27.63 kN/mm Zero position: 95.8 mm The clinching pliers from Tox Pressotechnik with servodrive are specially developed for use in robotic systems and offer a precise and efficient solution for joining sheets and materials. With its modern servo drive technology, it enables highly dynamic and controlled operation, making it ideal for integration into automated processes. The pliers are characterized by their robust construction and reliability, making them a durable and low-maintenance solution. Thanks to their flexibility and versatility, they are excellently suited for various industrial applications and help to increase productivity and quality in manufacturing.

Stanje: zelo dobro (rabljeno), Naprodaj komplet 3 profesionalnih ročnih klešč za stiskanje AMP / TYCO Electronics za industrijsko, avtomobilsko in delavniško uporabo. Originalno orodje z servisno dokumentacijo EDB Electronic – vsako namensko za določen obseg žic in kontaktov. Hodpfx Afjw Svapsweff

Stanje: zelo dobro (rabljeno), Prodajam klešče za priključke Molex 6982. Hfjdpfx Aow Sliaofwof

Stanje: novo, Leto izdelave: 2024, Hydraulic Guillotine Shear SMO-4008-N QC12Y 8x4000 Technical Specifications - Maximum sheet thickness (S235): up to 8.0 mm - Maximum sheet length: 4000 mm - Cutting angle: 1.5° - Strokes per minute: 8 - Maximum backgauge distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Weight: 7,300 kg Equipment - Rear backgauge with electric motor (on ball screw drives) - Hydraulic sheet clamping along the entire cutting length - Blade clearance adjustment - Ball inserts on the worktable - Work area lighting - Front support arms - Mobile foot controller E21S Control System (Mounted on a movable arm on the left side of the machine) - Backgauge control - Ability to store 40 programs – up to 25 individual steps per program - Retraction function - Parameter save at the push of a button - Parameter memory in the event of a power outage Hydraulic Connections in Steel Hydraulic connections are made of steel pipes instead of rubber hoses, reducing the risk of potential leaks. OCS - Oil Cooling System The oil cooling system ensures stable machine parameters even after long periods of continuous operation. PCS - Pressure Control System The pressure control system guarantees reliable blade performance over many years of operation. Professional Support We ensure ongoing contact with our customers. Therefore, every purchased machine includes hours of Otinus Specialist Support. Technical Consultation Our technicians assist you in selecting the right machine and accessories based on the relevant technical drawings of the parts to be manufactured. Come and Test Our Machine Take part in an exclusive demonstration conducted by a qualified Otinus technician, showcasing the full functionality of the machine. You may bring technical drawings and sample materials. Hfjdpfeiuzupjx Afwsf Included with the machine: 1-day operator training & commissioning - Day 1 (up to 8 hours) – commissioning and training on the control system. Telephone consultation by a specialist: - from 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months. Free loan of transport rollers and two lifters for easier machine installation at your site. Rollers and lifters supplied upon prior request (at least 7 days before machine delivery). Terms of Cooperation - 24-month warranty period. - Delivery time: approx. 10 - 12 weeks. Does not apply if the machine is marked as available from stock. - The machine is brand new - Warranty and post-warranty service by the seller - The customer is responsible for the machine during unloading and transport on their premises.

Leto izdelave: 2024, stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker C350 Felling Grapple / incl. Collector Grapple / incl. Tiltator / incl. Autospeed Function / incl. Electro-hydraulic Switching / in stock & immediately available / Year of manufacture: 2024 / DEMO unit / very good condition Price: €36,990.00 net / €44,018.10 gross Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 350 Grapple opening (mm): 1,430 Shear opening (mm): 700 Own weight (basic – fully equipped) (kg): 1,150 – 1,620 Recommended oil flow main circuit (l/min): 70 – 150 Recommended operating pressure (bar): 280 Recommended oil flow auxiliary circuit (l/min): 45-60 Carrier vehicle operating weight (t): 14 – 20 Equipment: - Collector grapple - Autospeed function - Tiltator, infinitely rotatable - Electro-hydraulic switching between collector grapple and tiltator - OilQuick OQ 70/55 adaptor plate Many other adaptor plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Hedpfx Afoyltvhewoff We have a large selection of various Westtech products in our warehouse, all immediately available! Mr. Herden (Tel.) will be happy to assist you. We will be pleased to provide you with a financing offer upon request. We are the official Westtech sales and service partner. We are the official OilQuick sales and service partner. We are the official Holp sales and service partner. We are the official Gierking GMT sales and service partner. We are the official Weber MT sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official Magni telehandler sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. Additionally, with 800 used commercial vehicles, we are one of Germany’s largest commercial vehicle dealers. We supply the complete Westtech range for you! Errors and prior sale excepted! Internal no.: 241097 = More information = New: No Part suitable for application in: Forestry Please contact Marius Herden for more information.

Leto izdelave: 2000, stanje: dober (rabljeno), številka stroja/vozila: Nbg, Only brackets left available!!! 1x steel chain hoist with 2 load chains, each 125 kg, equipped with a Müller Martini pneumatic stacking clamp – gripper – lifter, type 0277.0401 Hfjdpfx Afjhy Eqhewof Including trolley for mounting on Stahl KT2000, ABUS HB, or Demag KBK rail systems. Suitable for paper, pallets, cartons, etc. Chain hoist with 2 lifting speeds (fine lift), lifting height/chain length approx. 4 m Total weight approx. 150 kg Connection: 400V, 50Hz Good condition, fully functional Different years of manufacture, approx. 20 units available! Item location: 75053 Gondelsheim See pictures for details Shipping via freight forwarder or collection

Stanje: dober (rabljeno), Details on request. Hfodpfxjb Eu Nfo Afwof

Stanje: novo, The Brugger Grip 130 log grapple with 3-ton rotator is the ideal solution for efficient timber skidding and material handling. This grapple offers a 130 cm opening width and is equipped with a powerful rotator enabling precise control and rotation. The versatile mounting options make the Grip 130 extremely flexible. It can be easily attached to the rear three-point linkage or the front loader with Euro mount. This adaptability enables effective timber handling in a variety of applications. - Opening width: 130 cm - 3T rotator, 360° continuous rotation - Requires two double-acting hydraulic circuits - Suitable for Cat 2 & 3 three-point linkage - Suitable for Euro-mount front loaders Hfjdpfx Aethht Hsfwsf The rugged construction and high-quality finish ensure durability and reliability even under demanding conditions. The Brugger Grip 130 is the perfect choice for farmers, forestry professionals, and anyone in need of a dependable log grapple for timber operations. Contact us for your tailored quote!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The Brugger Grip 130 log grapple with 3-ton rotator is the ideal solution for efficient timber skidding and material handling. This grapple offers a 130 cm opening width and is equipped with a powerful rotator enabling precise control and rotation. The versatile mounting options make the Grip 130 extremely flexible. It can be easily attached to the rear three-point linkage or the front loader with Euro mount. This adaptability enables effective timber handling in a variety of applications. - Opening width: 130 cm - 3T rotator, 360° continuous rotation - Requires two double-acting hydraulic circuits - Suitable for Cat 2 & 3 three-point linkage Hfsdpfx Afjrbidvowjf - Suitable for Euro-mount front loaders The rugged construction and high-quality finish ensure durability and reliability even under demanding conditions. The Brugger Grip 130 is the perfect choice for farmers, forestry professionals, and anyone in need of a dependable log grapple for timber operations. Contact us for your tailored quote!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, nosilnost: 6.500 kg, Klešče za bale ISO razred: ISO razred 4 = 5.000 - 10.000 kg Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Hsdpfx Afeyi Nbhowsff Opis: Leto 2020, ISO 4A (61 cm), Nosilnost 6500 kg, Stranski pomik, Razpon odprtja 530-2740 mm, Širina 2200 mm, Klešče 1800 mm, ID OS1866

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, nosilnost: 2.800 kg, Klešče za bale Težišče tovora: 750 ISO razred: ISO razred 3 = 2.500 - 4.999 kg Stanje: Pripravljeno za uporabo in popolnoma delujoče Hfjdpfsyi I Rusx Afwef Tehnično stanje: dobro Opis: Leto 2019, ISO 3A (51 cm), Nosilnost 2800 kg / 750 mm, Bočni pomik, Širina 1450 mm, Klešče 1500 mm, ID OS1839