Kabinet Tiska nakup rabljenega (4.386)

Stanje: rabljeno, Leto izdelave: 1991, Pression 125 t Distanța între stâlpi 2100 mm Cursă 1000 mm Înălțime de montare 1300 mm Suprafața mesei 2230 x 1300 mm Forță pernă de tragere 63 t Cursă pernă de tragere 60 mm Suprafața pernei de tragere 1000 x 900 mm Înălțime masă deasupra pardoselii 1050 mm Suprafața ștampilei 2100 x 1000 mm Viteză coborâre 50 mm/sec Viteză ridicare 50 mm/sec Viteză de lucru 10 mm/sec Volum ulei 410 l Putere acționare 22,0 kW Greutate 31,0 t Nwodpfx Aovut D Tsdyob Dimensiuni aprox. 3,1 x 1,7 x 5,95 m Presă de probă hidraulică Aprobată pentru încărcări manuale conform normelor germane de prevenire a accidentelor (UVV) Cu acționare hidro-oleică, control dependent de presiune/timp și cursă, pernă de tragere hidraulică în masă, blocare a ștampilei, operare cu două mâini Nu necesită groapă de fundație Poate fi oferită nepusă în funcțiune, pusă în funcțiune în starea dată sau opțional cu nouă comandă Siemens S 7-1500 F.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Dobro delujoče stanje. Prosimo, oglejte si tudi naše druge oglase. Nwsdpfoupx E Uox Adyjb

Leto izdelave: 2025, Stanje: novo, Rated capacity 3000 kg/h (depending on fruit type & operating conditions up to 6000 kg/h possible) Yield up to 75% Belt width/length: 1000 mm / approx. 7000 mm Working width/height: 900 mm / 0–50 mm, continuously adjustable Belt speed continuously adjustable: 1.0–5.2 m/min Nodpfx Ajygmwjdyewb Electrical connection: drive motor 2.2 kW 400V Washing arm motor 0.25 kW 400V Water consumption: 3 l/operating minute Weight: approx. 2300 kg Dimensions LxWxH: 2750x1890x1690 mm without high-pressure cleaner and without compressor

Stanje: rabljeno, Leto izdelave: 1991, Pressure 300 t Column gap 1350/1000 mm Stroke 500 mm Machine weight approx. 20 t Table area 1900x1600 mm Ram area 1900x1600 mm Njdpfx Adevn U S Soyswb Table height 1000 mm Stroke and pressure shut-off Working feed 10 mm/s

Stanje: rabljeno, Leto izdelave: 1998, Pressure 40 t Stroke 250 mm Total power requirement 6 kW Machine weight approx. 3 t Frame/gap width 600/350 mm Table surface 860x620 mm Njdjvnwfnspfx Adyswb Ram surface 860x620 mm Table height 900 mm Manual lever operation Pressure cut-off

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen,

Leto izdelave: 1981, Stanje: skoraj kot novo (rabljeno), Used hydraulic (triple-acting) deep drawing press LAUFFER 400t. The press has already been dismantled and is in excellent condition, as it has been used very little. Technical Data: Year of manufacture: 1981 Press force in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Table dimensions (LxW) in mm: 1600 x 1300 Ram dimensions (LxW) in mm: 1500 x 1300 Installation space in mm: 850 Upper ejector stroke in mm: 160 Njdpfed Ntd Djx Adyewb Upper ejector force in t: 6.3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power in kW: 150 Overall dimensions (LxWxH) in mm: 3550 x 1200 x 5940 Total weight in kg: 50,000

Stanje: novo, Leto izdelave: 2024, MOBIL 2500 Mobile Pneumatic Edge Press for Furniture Manufacturing! Technical Data MOBIL Type 2500 (Type 3000): > Sturdy welded-frame construction made from rectangular hollow sections with stop and straightening guide, suitable for solid wood, veneer, and plastic edges. Nwsdsyuv Tjpfx Adyjb > Integrated electric heating rod made of durable AL alloy, cross-section 64 x 46 mm, adjustable from 50 - 248°C, power 1200 (1450) watts. > 4 (6) clamping and pressing units, each with 7-fold ball bearing guidance. Each pressing unit features one clamping and one pressing cylinder; gluing width adjustable via moveable straightening guide from 12 - 105 mm. Edging thickness up to 50 mm for solid wood edges. > Adjustable counter-stops ensure precise edge overhang. > The clamping cylinders and counter-stops are equipped with rubber pads. The stop and straightening guide have a special glue-repellent coating. > The pneumatic pressing units can always be actuated in pairs, with one switch for 'clamping the workpiece' and one switch for 'pressing'. > Press is mobile with 4 swivel casters, 2 of which are braked. > The press is equipped with a pneumatic maintenance unit, 3/8" connection, adjustable from 3-10 bar. Electrical connection for heating rods is 230 V, 50 Hz, 1200 (1450) watts. Usable dimensions W x H x D in mm: 2500 x 50 x 105 External dimensions W x H x D in mm: 2700 x 1200 x 850 Additional options and accessories for MOBIL available on request! Packaging: €92

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Z293-068, skupna višina: 3.800 mm, skupna širina: 4.000 mm, skupna dolžina: 5.000 mm, širina mize: 1.500 mm, dolžina mize: 2.500 mm, RASTER ZEULENRODA GHP 400 H/K-08 preskusna stiskalnica, leto izdelave 2004 TEHNIČNI PODATKI IN OPREMA: Tovarniška številka: Z293-068 Obratovalna napetost: 400 V Frekvenca: 50 Hz Krmilna napetost: 230 V Nodpfx Ajw Rggwedyowb Priključna moč: 240 kW Nazivni tok: 100 A Hidravlični pritisk: 320 bar Nazivna sila: 2 x 2000 kN Dimenzije mize: 2500 x 1500 mm Izteg konzol proizvajalca HILMA: 1600 mm Vključno s CNC krmiljenjem ter hladilno napravo in filtrom za izsesavanje REFERENČNA ŠTEVILKA 138 MERE IN TEŽA: 5000 x 4000 x 3800 mm 32000 kg OPOMBE O ODVOZU: Artikel je na voljo od oktobra 2025. Termin za prevzem je treba uskladiti na določen datum med 20.10.2025 in 31.10.2025 FCA: 59759 Arnsberg (DE), naloženo na tovornjak

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, Pressure: 125 t Passage width: 1000 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 6 t Dimensions (L x W x H): 2540 x 933 x 3000 mm Retracting force: 12 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 600 x 1300 mm Table plate: 600 x 1300 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Motor power: 11 kW Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Oil tank: 250 l Rapid traverse speed: 10 mm/sec Column diameter: 120 mm Operating principle of the tool testing press: 1. The main switch is activated by turning. 2. Then, the press lighting should be switched on. 3. The tool is placed into the pressure center of the press. If the tool requires greater force off-center (e.g., with combination tools where the first station punches thick sheets while subsequent stations only carry out fine work), it may be necessary to shift the tool slightly to the left or right so that the counterforce from the material acts as centrally as possible on the ram. 4. The lower tool is bolted to the press table, and the upper tool is then lowered. 5. To do this, switch on the pump at the control cabinet. The fall protection then releases the ram. 6. A slow pull on the control lever starts the downward movement. The more you pull, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec. 7. The pressing force is set via a rotary knob, located to the right near the manual control lever. Nodefxykpopfx Adyswb 8. After the ram reaches the upper tool, it is attached to the ram. 9. Any transport locks are removed if present, then the press is opened by pressing the manual lever. The speed of the upward movement can be continuously adjusted from 0 to 25 mm/sec using the manual lever.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, Pressure: 40 t Passage width: 1000 mm Stroke: 400 mm Approx. machine weight (without operating fluids): 3.5 t Nedpfxefxykwj Adyewb Dimensions (L x W x H): 2065 x 700 x 2905 mm Retracting force: 4 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 1320 x 600 mm Table plate: 1320 x 600 mm Table height above floor approx.: 750 mm Oil cooling (electric): 1.5 kW (max) Motor power: 8 kW Feed speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Rapid traverse speed: 10 mm/sec Column diameter: 100 mm Hydraulics and tank mounted on top of the press: 2400 ? All-round maintenance platform: 3600 ? Siemens S7 1200: 4600 ? Drip tray made of painted steel: 850

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0199 - Rev.00, Pressure: 160 t Passage width: 1200 mm Stroke: 600 mm Nwjdpfxjdxvfhe Adyob Machine weight approx. (without operating materials): 7 t Dimensions (L x W x H): approx. 2400 x 1400 x 3400 mm Return force: 16 t Max. working height: 800 mm Return speed: 25 mm/sec Ram plate: 1670 x 800 mm Table plate: 1670 x 800 mm Table height above floor approx.: 800 mm Oil cooling (electric): 1.5 kW (max) Motor power: 18 kW Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Travel distance: 600 mm Oil tank: 300 l

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0163, Pressure: 800 t Clear width between uprights: 1200 mm Stroke: 500 mm Total power requirement: 85 kW Approx. machine weight: 40 t Dimensions L x W x H: 4100 x 3500 x 6650 mm Return force: 80 t Main cylinder: 1 piece Column diameter: 250 mm Installation height (distance between bolster and ram plate with cylinder fully retracted): 1000 mm Table size: 1300 x 1100 mm Ram area: 1300 x 1100 mm Ram height: 800 mm Table height above floor approx.: 950 mm Max. table load: 5 t Approach speed: 250 mm/sec Return speed: 150 mm/sec Oil tank: 1000 l Working speed at start: 10 mm/sec Hydraulics and tank mounted on top of press: included? All-round maintenance balcony: included? Side panels: included? Light barriers front and rear: included? Right side monitored door: included (800 x 530 mm)? Left side monitored door: included (800 x 530 mm)? Electrical oil cooling and thermal insulation for ram and table by a 30 mm thick insulation plate Table deflection according to DIN max. 0.2 mm Nwsdpfx Adedxvfpoyjb Ejector force: 150 t Ejector stroke: 200 mm Ejector speed: 70 mm/sec

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, Pressure: 110 t Passage width: 1500 mm Stroke: 650 mm Total power requirement: 15 kW Approx. machine weight: 11 t Dimensions L x W x H: approx. 2640 x 3200 x 3650 mm Return force: 11 t Column diameter: 120 mm Max. working height: 1000 mm Table size: 1990 x 1000 mm Nwsdpfxofhcc Ts Adyob Ram size: 1990 x 1000 mm Ram travel: 650 mm Table height above floor: approx. 800 mm Approach speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Oil cooling (electric): 1.5 kW (max)

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, širina mize: 620 mm, dolžina mize: 750 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Rok plačila za stroj je 20.11.2025! Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Prostornina: 180 l Tlačna sila: 100 kg Dimenzije mize: 750 x 620 mm PODROBNOSTI STROJA Nwodpfexniw Esx Adyob Priključna moč: 7,5 kW Dimenzije in teža Dimenzije (D x Š x V): 1.500 x 1.200 x 2.900 mm Teža: 4.250 kg

Stanje: rabljeno, Ta ponudba se nanaša na Dasit Biopharma Faster SafeFAST Classic 209D mikrobiološko varnostno komoro. Nodpfx Asxhftcodyjwb Naprava je popolnoma delujoča in takoj pripravljena za uporabo. Pregled in skladnost Primerna za skladnost s standardi EN 12469:2000 (EU) in NSF/ANSI 49 (ZDA), SafeFAST Classic 209D nudi trojno zaščito (uporabnik, izdelek, okolje) z razredom II vertikalnega laminarnega zračnega toka. Pretok zraka: približno 70 % zraka se recirkulira skozi H14 HEPA/ULPA filter, približno 30 % pa se izpusti preko drugega H14 HEPA filtra. Ključne značilnosti Konstrukcija: Ohišje iz jekla z epoksi prašnim premazom; zadnja stena ustreza merilom čistljivosti po EN12469; segmentiran delovni pladenj iz nerjavečega jekla AISI 304L, odstranljiv za čiščenje ali avtoklaviranje. Električna varnostna spušna steklena zaščita: Motorizirano, vertikalno pomično čelno steklo z standardno delovno odprtino 200 mm (maksimalno 490 mm), tečajno za temeljito čiščenje. Sistem pretoka zraka in filtracije: Ena ali dve centrifugalni ventilatorji; statična zasnova z negativnim tlakom zagotavlja, da je ves onesnažen zrak voden v HEPA filtre, brez pozitivnega tlaka v kateremkoli prostoru. Nadzorni in varnostni sistemi Mikroprocesorsko vodenje (ECS™ ali podobno): Spremljanje delovanja v realnem času preko osvetljenega LCD zaslona in tipkovnice na dotik, prikaz pretoka zraka, stanja filtrov, delovanja ventilatorja in položaja zaščitnega stekla; omogoča varno uporabo in beleženje podatkov. Zvočni in vizualni alarmi: Opozarjajo uporabnika na odstopanja hitrosti zračnega toka, nepravilno postavitev zaščitnega stekla, zamašene filtre, težave z ventilatorjem ali izpad električne energije.

Stanje: rabljeno, Ta ponudba predstavlja 8 mobilnih izolatorjev znamke Envair različnih specifikacij, ki so trenutno na zalogi. Vsi izolatorji so v popolnoma delujočem stanju in so pripravljeni za takojšnjo uporabo. Envair Mobilni Izolator Njdpfsxv Dhbjx Adyewb Podjetje Envair Technology je proizvajalec iz Združenega kraljestva, specializiran za rešitve čistih prostorov in zadrževanja za potrebe zdravstva, biotehnologije in farmacevtske industrije. Njihov program vključuje širok nabor izolatorjev, zasnovanih za zagotavljanje nadzorovanih pogojev pri ravnanju z nevarnimi snovmi, kar omogoča varnost tako za operaterja kot tudi za izdelek. Področja uporabe: - Bolnišnične lekarne: priprava TPN, CIVAS in aseptično izdajo zdravil. - Farmacevtski laboratoriji: rokovanje z visoko potentnimi učinkovinami (HPAPI) in sterilna priprava zdravil. - Testiranje sterilnosti: zaščiteni, nadzorovani prostori za testiranje produktov. - Razvojno-raziskovalni oddelki: varno zadrževanje med eksperimentalnimi ali zgodnjimi fazami razvoja. Ključne lastnosti izolatorjev Envair: - Modeli s pozitivnim in negativnim tlakom: Envair nudi izolatorje s pozitivnim tlakom za zaščito izdelka pred kontaminacijo ter z negativnim tlakom za zaščito operaterja pred nevarnimi snovmi. - Skladnost z GMP standardi: številni izolatorji Envair ustrezajo EU GMP razredu A in ISO 5 klasifikaciji, kar zagotavlja sterilne in nadzorovane pogoje. - Prilagodljive zasnove: Envair izdeluje rešitve po meri glede na specifične zahteve strank, vključno z edinstvenimi dimenzijami in tehničnimi lastnostmi. - Napredne tehnologije zadrževanja: izolatorji so opremljeni z avtomatiziranimi testi tesnosti s padcem tlaka, elektromagnetnimi zaporami prenosnih komor ter integriranimi sistemi za dekontaminacijo. - Uporabniku prijazni upravljalni sistemi: večina naprav ima intuitivne zaslone na dotik in PLC-vodene sisteme za enostavno in učinkovito upravljanje. Naraščajoča potreba po zadrževanju HPAPI Povpraševanje po personaliziranih zdravilih, ki vsebujejo visoko potentne farmacevtske učinkovine (HPAPI)—zlasti pri novih zelo potentnih onkoloških, kardiovaskularnih in diabetičnih zdravilih—hitro narašča. Ta zdravila pogosto zahtevajo krajše roke izdelave, zato morajo farmacevtska podjetja razvijati hitrejše in bolj prilagodljive delovne tokove. V takih okoljih z visokim tveganjem in veliko vrednostjo je skladnost z GMP nepogrešljiva. Pogosto se spregleda dejstvo, da so ljudje, ki razvijajo, proizvajajo in izdajajo ta zapletena zdravila, izpostavljeni nevarnim, celo smrtonosnim spojinam. Njihova varnost je ključna, saj zagotavljajo zanesljivo dobavo naprednih terapevtikov. Strokovno znanje pri ravnanju s HPAPI za CMO in CDMO Envair ima specializirano znanje pri pomoči proizvajalcem (CMO) in izvajalcem razvoja/proizvodnje po pogodbi (CDMO) pri varnem delu s HPAPI—tudi v obstoječih, nepopolnoma varovanih prostorih. Njihovi izolacijski sistemi so načrtovani, izdelani in nameščeni za doseganje zahtevnih ravni zadrževanja pod 1 μg/m³ (OEB 5). Vsak sistem je prilagojen specifični lokaciji in procesnemu koraku—naj bo to tehtanje, mešanje, mletje, razprševanje ali pakiranje. Področja uporabe: - Bolnišnične lekarne: priprava TPN, CIVAS in aseptično izdajo zdravil. - Farmacevtski laboratoriji: rokovanje z visoko potentnimi učinkovinami (HPAPI) in sterilna priprava zdravil. - Testiranje sterilnosti: zaščiteni, nadzorovani prostori za testiranje produktov. - Razvojno-raziskovalni oddelki: varno zadrževanje med eksperimentalnimi ali zgodnjimi fa

Stanje: dober (rabljeno), Obel Pedersen High-Frequency Throughfeed Belt Press Opel-Pedersen Press Type 2412 Pressing length: 2,500 mm, width: 600 mm with glue application system, lay-up table, HF generator T20 V and water cooling Nwodpfxedybr Ro Adyob The system has been dismantled.

Stanje: rabljeno, System: Used chamber filter press Nwedpfxjb E A Efe Adyeb Design: Side-beam guided Filter plate size: 400x400 mm Number of chambers: 30 Cake thickness: 25 mm Filter plates: Polypropylene (PP) Filter cloths: Optionally available, tailored to the specific medium Discharge: Open Open filtration area: approx. 7.5 m² Press capacity: approx. 90 dm³ Plate pack length: approx. 1,512 mm Filtration pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10°C / max. 50°C Plate shifting: Manual Hydraulic pump: Optional Motor voltage: 380 V Control voltage: 230 V – 24 V Accessories: Optional, according to customer requirements and machine type Safety devices: Optional Special accessories: Optional, depending on configuration Upgrades: Possible in consultation, depending on machine type Special services: Refurbishment service available upon request. Each unit undergoes a service check or general overhaul before delivery. Up to 12 months warranty provided for these units. Condition: The system is immediately operational. Purchase or rental: Inspections of the systems are possible by appointment at our premises.

Stanje: novo, Hydraulic Cylinder Replacement Cylinder Chamber Filter Press We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats. Nwodpfxsd Hgade Adyjb

Stanje: rabljeno, System: Chamber filter press, pre-owned Application area: Chamber filter press, pilot plant Design: Side-bar guided Filter plate size: 400 x 400 mm Number of plates: 15 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available as an option, matched to the specific medium Discharge: Open Filtration area: approx. 3.0 m² Press volume: approx. 37 dm³ Plate package length: approx. 700 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Pump technology: Optional Purchase or rental: Inspection of the systems at our facility can be arranged by appointment. Nsdeb E I T Sepfx Adyswb Would you like to rent or purchase this unit? Please contact us—we are happy to assist you.

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-1, System: Chamber filter press, demonstration model – as new Operating hours: None Application areas: Chamber filter press, laboratory press, pilot plant, wine press Design: Side-beam guided Filter plate size: 250 x 250 mm Number of plates: 8 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available optionally, customized to medium Discharge: Open Filter area: approx. 0.56 m² Pressing volume: approx. 7 dm³ Plate bundle length: approx. 379.2 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Njdpob Dluwjfx Adyswb Product-contact parts: PP & stainless steel Dimensions (L x W x H): approx. 960 x 400 x 360 mm Weight: 350 kg (photo shows identical machine) Pump system: Optional Purchase or rental: Machine inspections available by appointment at our facility. Note: Several units available. Please pre-order due to high demand. Are you interested in renting or purchasing this machine? Please contact us – we are happy to assist.

Stanje: novo, Hydraulic cylinder replacement cylinder Chamber filter press Nwedpsd Hf Uwsfx Adyob We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats.

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-2, System: Chamber Filter Press – as new, demonstration model Operating hours: None Application area: Chamber filter press, pilot plant, wine press Design: Side-bar guided Nodpfx Adsb Dluyeyswb Filter plate size: 390x390 mm Number of plates: 14 Filter plates: Polypropylene (PP) Cake thickness: 25 mm Filter cloths: Available optionally, tailored to the medium Filtrate discharge: Open Filter area: Approx. 2.8 m² Chamber volume: Approx. 35 dm³ Plate stack length: Approx. 391 mm Filtration pressure: Approx. 15 bar Plate shifting: Manual Frame: Steel Product-contact parts: Polypropylene (PP) + stainless steel Dimensions (LxWxH): Approx. 1695x750x630 mm Weight: 610 kg (photo shows identical system) Pump technology: Optional Purchase or rental: Inspection of the systems can be arranged at our facilities by appointment. Additional: Several units available. Please order in advance due to high demand.

Leto izdelave: 1999, Stanje: dober (rabljeno), We are selling the membrane press for kitchen doors or door frames, etc. Manufacturer: Italpresse, Model: Form Air. Year of manufacture: 1999. Working area: 2330 x 780 mm. Inspection possible. Complete documentation included. Nedpfx Aed Ew Tbodyowb