Stiskanje tabličnih računalnikov

Hidrobrasil Einständerpresse

Stanje: novo, Leto izdelave: 2021, stiskalna sila: 10 t, Single-column press with 10 t capacity, suitable for continuous shift operation, supplied with these basic specifications: a) Traverse speed 0 – 10 mm/sec downward b) Opening speed up to 25 mm/sec c) Pressing speed from 0 to 10 mm/sec, adjustable; initial pressing speed 10 mm/sec d) Table size: 600 x 300 mm e) Ram size: 300 x 300 mm, with T-slots and central cylinder clamping f) Overall dimensions approx. 1100 x 600 x 1850 mm g) Oil temperature indicator on the oil tank h) Pressure adjustment range from 0.5 t to 10 t (adjustable via rotary controller) i) Remote cable control for up/down movement j) Machine frame powder-coated or double-painted k) Control cabinet connection from above with 3000 mm cable and 16 amp plug l) Assembly, commissioning, and operator training available at additional cost Design details: Press type: Single-column press Thermal neutrality: 80 – 120°C Number of operator sides: 1 Forces: Pressing force max. (at 250 bar): 100 kN Free lift-off force max.: 10 kN Pressure build-up time, closed die steel-on-steel: max. 2 sec Dimensions: Max. opening width: 800 mm Stroke/minimum opening: 500/300 mm Table height above floor: 850 mm Total height above floor (overall height): approx. 2850 mm Minimum hall height: 3500 mm Parallel deviation at 20°C: n/a Deflection at max. closing force with 70% table coverage: ≤ 0.1 mm/m Weight: Total machine weight (without operating fluids): approx. 1.6 t Speeds: Rapid closing speed: 10 mm/sec Pressing speed: 10 – 0 mm/sec Sound level: Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: Number of press cylinders: 1 Operating pressure max.: 250 bar Pressure build-up time: 2 sec Pressure control accuracy during pressing stroke: n/a Main pump: Gear pump, approx. 6 l/min Gisdpfshma Smsx Agysp Oil reservoir: approx. 80 l HLP 46 MW Ambient temperature max.: 40°C Oil temperature max.: 55°C Pre-feed temperature: n/a Electrics: Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection (main motor): 2.2 kW Total connected load: approx. 3 kW

Stanje: dober (rabljeno), Dvostruko spiralno miješalo Potpuno od nehrđajućeg čelika Giodpfsqu Uykox Agyep Dimenzije komore za miješanje: 1500 mm duljina x 1100 mm širina x 700 mm dubina

Stanje: novo, Leto izdelave: 2022, stiskalna sila: 100 t, Estimated equipment weight: 3,500 kg Equipment dimensions (W x D x H) (approx. external): 1,354 x 2,005 x 2,595 mm Table dimensions (work area) W x D (table size): Ø1,050 mm Daylight opening between table and hammer: 350 mm Hammer stroke (ram travel): 300 mm Drive power (power in kW): 14.24 kW Motor speed: 1,500 rpm Godpfx Aohmi T Uegyjip Pump flow rate: 44.5 L/min Pump-motor displacement ratio: 27.59 cm³/rev Working force (cylinder output): 100 tonnes Return force: 10 tonnes Feed speed: 250 mm/s Working speed under pressure: 3–15 mm/s Return speed (lifting speed): 150 mm/s Working pressure (maximum): 210 bar Number of cylinders: 2 pcs. Rod diameter: 41.76 mm Cylinder diameter: 250.97 mm Cylinder stroke (ram travel): 300 mm Tank capacity (oil tank volume): 350 litres Suction cylinder: 5 tonnes Stroke of suction cylinder (ram travel): 150 mm

Stanje: novo, Leto izdelave: 2022, stiskalna sila: 15 t, C-frame press with 15 t capacity Suitable for continuous shift operation a) Travel speed: 10 mm/sec downward b) Opening speed: up to 25 mm/sec c) Initial pressing speed: 10 mm/sec d) Table size: 400 x 400 mm e) Ram size: 200 x 200 mm, with T-slots and central cylinder clamping f) Overall dimensions: approx. 1150 x 800 x 1750 mm g) Oil temperature indicator on the oil tank h) Pressure adjustment from 5 t to 17 t (adjustable via rotary control) i) Manual lever operation with two speeds j) Machine body powder-coated or double-lacquered k) Control cabinet supply from above with 3000 mm cable and 16 Amp plug l) Assembly, commissioning, and training available at extra cost Press type: C-frame press Thermally neutral: 80–120 °C Number of operator sides: 1 side Forces: Max. pressing force (at 250 bar): 150 kN Max. free tearing force: 10 kN Pressurization time, closed die (steel on steel): max. 2 sec Max. opening width: 400 mm Stroke and min. opening: 350 mm Table height above floor: 850 mm Height above floor (total height): approx. 1900 mm Minimum ceiling height: 2,500 mm Parallelism deviation at 20°C: +/- 0.1 mm Giodpfx Aeitylgegyjp Measured at max. closing force with 70% occupancy:

Stanje: skoraj kot novo (rabljeno), Manesty D3B tablettenpers Seriennummer: 24D117 Giodpfxeiy Nnyj Agyop Manesty 16-Stationen-Tablettenpresse, bis zu 500 Tabletten pro Minute, maximaler Tablettendurchmesser 25 mm, maximale Fülltiefe 20 mm, 3-Phasen-Anschluss.

Stanje: novo, Leto izdelave: 2021, stiskalna sila: 17 t, Here are the technical specifications of the offered machine: If this press does not exactly match your requirements, please request an individual offer tailored to your needs with just one click: Contact us for a customized quotation. HIDROBRASIL manufactures presses exactly according to your specifications at surprisingly affordable prices! Technical Data & Information: Hydraulic 17-ton C-frame Press C-frame press with 17-ton capacity, suitable for continuous operation, with these basic specifications: a) Travel speed: 10 mm/s downward b) Opening speed: up to 25 mm/s c) Initial pressing speed: 10 mm/s d) Table size: 400 x 400 mm e) Ram size: 200 x 200 mm, with T-slots and central cylinder clamping f) Overall dimensions approx.: 1150 x 800 x 1750 mm g) Oil temperature display on the oil tank h) Adjustable pressing force from 5 to 17 tons (set via rotary knob) i) Manual lever operation with two speeds j) Machine frame powder-coated or double-painted k) Electrical cabinet cable entry from above, with 3000 mm cable and 16 A plug l) Installation, commissioning, and training available at additional cost Press Type C-frame press Thermal neutral zone 80 – 120 °C Number of operator sides 1 side Forces Pressing force max. (at 250 bar): 170 kN Free return force max.: 10 kN Pressure build-up time (closed die, steel on steel): Max. 2 sec Dimensions Max. opening width: 250 mm Stroke and min. opening: 100 mm Table height above floor: 850 mm Height above floor (overall): ca. 2200 mm Minimum hall height: 2500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% utilization: ≤ 0.3 mm/m Weight Total weight of press (without operating fluids): approx. 1 ton Speeds Fast closing: 10 mm/s Pressing speed: 10 – 0 mm/s Sound Level Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press cylinders: 1 pc Operating pressure max.: 250 bar Pressure build-up time (press): 2 sec Pressure accuracy during pressing stroke: +/- 5 bar Main Pump Gear pump approx.: 6 L/min Oil volume: Approx. HLP 46 MW 100 liters Ambient temperature max.: 40°C Oil temperature max.: 55°C Preheat temperature: (not specified) Electrics Main supply: 400 V AC Control voltage (hydraulic pump): 24 V DC Frequency: 50 Hz Hydraulic main motor connection: 2.2 kW Total power input: Approx. 3 kW Design The press is designed as an oil-hydraulic C-frame press. Hydraulics and tank are located at the top or on the press itself. Hydraulic Unit The hydraulic system is mounted above the press. Safety Features The press meets the applicable safety regulations (UVV) as well as current EU standards and directives for the described scope of delivery, each in their latest versions. Electrics / Controls The control cabinet, with control, power, and safety components, is mounted on the right side of the press. Operation is via hand lever control. Giedpfxjgrki Se Agysp Control Cabinet Equipment Protection class: IP 54 Reserve space: approx. 20% Cooling: none Internal lighting: none Mode selector switch lockable: Yes

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.620 mm, skupna širina: 850 mm, skupna dolžina: 1.869 mm, stiskalna sila: 30 t, širina mize: 600 mm, dolžina mize: 600 mm, skupna masa: 2.900 kg, Weight approx. 2,900 kg Table plate size 600 x 600 x 100 mm, plus 50 mm of free space behind the plate up to the press frame Table fixing points at 600, 800, 1000 mm Ram stroke 400 mm Motor 3 kW 60-litre hydraulic tank Downward speed 10 mm/s Giodpfjvhcykox Agyjp Upward speed 24 mm/s

Stanje: zelo dobro (rabljeno), Easycount CD5 števni stroj za tablete Serijska številka: 51002040 Giedpfxeiy Nnge Agyjp Iz nerjavečega jekla, Easycount omogoča natančno inventarizacijo vseh trdih in mehkih želatinskih kapsul ter večine velikosti in oblik tablet, natančno in samodejno polni vse vrste posod, omogoča pregled števila napolnjenih posod kadar koli ter zazna število kosov v zadnjih in nedokončano napolnjenih posodah, 1-fazni priklop.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good Gedpfx Aohy Tp Degyjip 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Stanje: dober (rabljeno), Leto izdelave: 2008, Granulator La Meccanica CLM 800 POR The machine does not have doors It was used for processing wood shavings Gijdpfx Ajwdawqogyep