Hidrobrasil Stiskanje Tabličnih Računalnikov nakup rabljenega (418)

Leto izdelave: 2007, obratovalne ure: 138 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 900K707385, Tablet Press PRESSIMA – as new, in delivery condition Fully functional machine with complete documentation and software. Includes a multi-tip tool set EU-D (5 × 4mm) (original price €12,000, 6 months old) as well as a single-tip tool set (5mm) EU-B. Both punch sets supplied by Ritter. The machine features an interchangeable turret. B or D tooling can be used, each in EU or TSM standard. Hjdpfx Agsy Hl Aqjxsl Operation • Suitable for small batch production • Main compression force measurement with digital display on the machine panel • Digital readout of parameters set via handwheels • Note: no automatic control available Technical Data • Speed: 10–75 rpm • Main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Feed shoe: two-wheel, speed adjustable • Drive motor: frequency-controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and pressing area: stainless steel • Pressing area paint-free, easy access, surfaces hard nickel-plated • Central dust extraction via connection port • Central lubrication of punches via manual lubrication pump • Automatic lubrication pump for punches and guideways • Shoe motor integrated in head section Mechanics • Handwheels for tablet thickness, main compression, pre-compression, and fill quantity • Rotary flap between fill tube and feed shoe • Robust pre- and main compression stations • Scrapers on upper and lower punches • Retaining magnets on lower punches • 12 mm feed cam standard • Lower punch is lowered after dosing • Lower guideway and ejection cam easily removable • Machine status display on control panel Measurement and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/evaluation of: o Main compression top o Main compression bottom o Pre-compression top o Ejection force o Scraping force o Punch travel (upper and lower) • Signal amplifiers for main compression, pre-compression, ejection, and scraping force available Equipment / Positions • Upper and lower punch shaft bores with feather keyways 4.8 mm for guided tooling • Compartment feed shoe • Hard-chromed turret plate • Main compression force measurement incl. display at the operator terminal • Accessory kit type 8 MX: o 4 blank dies EU-B o 4 blank dies EU-D o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Stanje: novo, Leto izdelave: 2026, skupna širina: 1.500 mm, skupna dolžina: 2.500 mm, skupna višina: 3.200 mm, Rotary Tablet Press SPT-TP600 2-layer production; Hodjuac Sfopfx Agxel Touchscreen, PLC Control Panel; HMI (Human Machine Interface); SPT-TP 600 Number of stations (max.): 16 stations 1 Max. tablet output: 3,000 - 18,000 tablets/hour 2 Max. tablet diameter (round): 50 mm 3 Max. tablet thickness: 15 mm 4 Max. main compression force: 30 t 6 Dimensions: 1,500 x 2,500 x 3,200 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), vhodna napetost: 400 V, vhodni tok: 32 A, vrsta vhodnega toka: trifazni, stiskalna sila: 20 t, skupna dolžina: 2.400 mm, skupna širina: 1.500 mm, skupna višina: 2.400 mm, skupna masa: 2.000 kg, temperatura okolja (min.): 10 °C, okoljska temperatura (maks.): 40 °C, dolžina elektro omare: 60 mm, širina krmilne omare: 80 mm, vrsta nastavitve višine: hidravlični, Oprema: dokumentacija / priročnik, Hidrobrasil Tablet Press – 20 t – C-Frame – Manual Loading Press For sale is a hydraulic single-column press (C-frame) manufactured by Hidrobrasil with a pressing force of 20 t, specially designed for applications in the pharmaceutical and chemical industries. The machine is ideal for tablet production as well as for precise pressing and forming processes in small series and laboratory applications. ==== Technical Data & Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-column press - Machine designation: Tablet press - Design: C-frame / Single-column press - Year of manufacture: 2023 - Location: Gelsenkirchen, Germany - Pressing force: max. 20 t - Machine weight: approx. 2 t - Total height: approx. 2,400 mm ==== Working Area - Max. opening width: 500 mm - Stroke / min. opening: 400 / 100 mm - Table height from floor: 800 mm ==== Speeds - Fast closing: 120 mm/sec Hodpfx Astv Ewdjgxol - Pressing speed: 5–10 mm/sec ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Pressure accuracy: ±5 bar - Main pump: Gear pump, approx. 10 l/min - Oil volume: approx. 150 l (HLP 46) - Main motor: 22 kW - Total connected load: approx. 6 kW ==== Precision & Stability - Parallelism deviation: ±0.1 mm at 20°C - Deflection: max. 0.3 mm/m ==== Control & Safety - Control voltage: 24 V DC - Light barriers: SICK / Pilz / Schmersal - Two-hand operation, optional foot control - Safety execution in accordance with EU standards and accident prevention regulations (UVV) ==== Equipment - Table plate as tray with 50 mm rim and drain - Position adjustment via sensors - Pressure adjustment: 5–20 t via rotary control - Control cabinet mounted right side, protection class IP54 ==== Production & Function - Multi-tool: 8 pressing pistons - Output: approx. 8–12 parts per minute - Hydraulic unit fully removable for maintenance ===== Tablet production, pharmaceutical industry, chemical applications, laboratory presses, small series manufacturing Hydraulic press, hydraulic press, tablet press, single-column press, C-frame press, pharma press, laboratory press Are you looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are manufactured according to German machine guidelines, as well as European machine directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with national Brazilian safety guideline NR 12, which builds upon these standards. Our core strengths are in special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2025, trajanje garancije: 12 meseci, skupna širina: 1.400 mm, skupna dolžina: 1.400 mm, skupna višina: 2.000 mm, hitrost vrtenja (razdalja/čas): 50 mm/min, Rotary Tablet Press SPT-TP500DH Salt Production Touch screen, PLC Control Panel; HMI (Human Machine Interface); SPT-TP 500 DH Number of Stations: 33 Standard Tools: EU 1” (IPZ1”) Max. Output/Hour: 180,000 pcs Rotations per Minute (rpm): 5–50 Max. Tablet Dimension (Round): 30 mm Max. Filling Depth: 35 mm Upper Punch Penetration (max.): 1–6 mm Max. Main Compression Force: 20 t Die Diameter: 41.30 mm Die Height: 38.10 mm Punch Barrel Diameter: 31.70 mm Punch Length: 154 mm Machine Dimensions with Hopper (L x W x H): 1,400 x 1,400 x 2,000 mm Weight: 7,000 kg Hsdsvu Uk Uopfx Agxsl Power Rating: 20 kW Voltage / Frequency: 240/400 V – 50/60 Hz

Leto izdelave: 2025, stanje: novo, Rotary tablet press for the tableting of single-layer tablets. Easy tool change, fast cleaning, low-noise operation. Includes dust extractor, tablet deduster, and vacuum conveyor. Hsdpsv Nl Sfsfx Agxjl - Specifications: - Tooling: D type - Number of punch stations: 15 units - Max. machine speed (idle): 77 cycles/minute (approx. 69,000 tablets/hour) - Max. tablet diameter: 25 mm - Max. fill depth: 20 mm - Max. precompression force: 12 kN - Max. main compression force: 100 kN - Product-contact parts are made from stainless steel SUS 316L; housing is stainless steel 304 - Power consumption: 5.5 kW - Machine dimensions: 660 × 690 × 1620 mm - Weight: 675 kg Please note that our new prices are often below the usual prices for used machines. Feel free to contact us and let us know your packaging requirements. Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines are supplied with a full warranty.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Slugger-modell med 12 stationer med specialverktyg Maximal presskraft: 120 kN 16/20 stationer tillgängliga med D-verktyg och 100 kN presskraft Fyrkantig modell med GMP-konstruktion. Valfri elektromagnetisk koppling för icke-farmaceutiska / tungdriftsapplikationer. ACVFD som tillval för huvudmotorn. Högmomentmotor för sluggingapplikationer. Idealisk för slugging-/brus-/veterinär-/icke-farmaceutiska applikationer. Lastcell för övervakning av presskraft finns som tillval. Hodpsrrgtrofx Agxol 38 mm runda tabletter komprimeras utan problem.

Stanje: zelo dobro (rabljeno), Manesty D3B stiskalnica za tablete Manesty stiskalnica za tablete s 16 postajami, zmogljivost do 500 tablet na minuto, največji premer tablete 25 mm, maksimalna globina polnjenja 20 mm, 3-fazni priklop. Hodpfx Asiy Nn Isgxjl

Stanje: skoraj kot novo (rabljeno), Manesty D3B tablettenpers Seriennummer: 24D117 Manesty 16-Stationen-Tablettenpresse, bis zu 500 Tabletten pro Minute, maximaler Tablettendurchmesser 25 mm, maximale Fülltiefe 20 mm, 3-Phasen-Anschluss. Hodpfxjiy Nnyj Agxel

Stanje: zelo dobro (rabljeno), Easycount CD5 števni stroj za tablete Serijska številka: 51002040 Hsdpfxeiy Nngj Agxjl Iz nerjavečega jekla, Easycount omogoča natančno inventarizacijo vseh trdih in mehkih želatinskih kapsul ter večine velikosti in oblik tablet, natančno in samodejno polni vse vrste posod, omogoča pregled števila napolnjenih posod kadar koli ter zazna število kosov v zadnjih in nedokončano napolnjenih posodah, 1-fazni priklop.

Stanje: novo, stiskalna sila: 300 t, For sale is a hydraulic portal straightening press (H-frame) manufactured by Durendus, featuring a maximum pressing force of 300 T. The machine is equipped with a table measuring 1,500 × 2,000 mm, a maximum installation height of 1,000 mm, and a stroke of up to 600 mm, making it particularly suitable for straightening, calibration, and heavy forming operations in industrial environments. The machine shown here was custom-built and delivered to a client. We can manufacture a new unit with very short lead times. Options (upon request): The listed options are based on executed customer projects and enable targeted adaptation of the machine to your specific application. The standard machine constitutes a fully functional base version—additional features are commonly integrated per project requirements. Examples include: * Siemens S7-1200 PLC + 7" display * Wireless remote control * Safety strip along the base of the portal columns (600 mm) * Table with T-slots * Motorized bridge travel * Extended travel distance * Increased open height * Light curtain at the base, beneath the bridge * Laser distance measurement * Lifting cylinder in the table ##### Technical Data + Information: Hydraulic Portal Straightening Press – H-frame – 300 T ==== General Information - Description: Hydraulic Portal Straightening Press - Design: H-frame / Portal Press - Manufacturer: DURENDUS - Pressing force: 300 T (adjustable) - Column spacing: 1,580 mm - Table size: 1,500 × 2,000 mm - Bridge travel: 1,500 mm - Lateral travel (center): ±500 mm - Max. installation height: 1,000 mm - Table height from floor: 950 mm - Ram extension: 200–400 mm - Total weight: approx. 9,500 kg ==== Hydraulic Cylinder - Piston stroke: 0–600 mm - Max. working pressure: 250 bar - Return speed: 16 mm/s - Ram speed: 10 mm/s ==== Hydraulics & Drive - Hydraulic pump: ASC - Delivery rate: 60 l/min - Tank volume: 250 l - Motor power: 11 kW - Pressure accuracy: ±5 bar - Hydraulic unit: top-mounted - Valve technology: DUBLOMATIC - Filter: FILTREC - Oil level monitoring: electronic - Cooling: air cooling ==== Motion System - Bridge drive: 2 × 2.2 kW Hjdpfsyzfkqex Agxol - Lateral cylinder movement: 0.75 kW - Movable bridge: yes - Laterally movable cylinder: yes ==== Controls - PLC: SIEMENS S7-1200 - Operation: Pendant panel / cable remote control - Control: manual lever valve + electric control - Optional: Touchscreen (7") - Optional: Wireless remote control - Optional: up to 99 programs storable ==== Safety - Hydraulic overload protection - Electronic overload protection - Top/bottom limit safety switches - Safety PLC - CE-compliant design - Optional: Safety strip on portal columns ==== Electrical Connection - Mains supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 11 kW - Total connected load: approx. 18 kW Application areas: Straightening tasks, tool and die construction, steel fabrication, heavy-duty forming, maintenance, try-out, calibration work (Hydraulic press, hydraulic portal press, portal straightening press, straightening press, 300-ton press, 300 T press, H-frame press, heavy-duty press, industrial press, forming press, straightening system) ##### The images shown are for reference purposes and may differ from the actual machine configuration.

Stanje: novo, stiskalna sila: 20 t, številka stroja/vozila: DF0233, Sliding Table Press – Manufacturer: Hidrobrasil – 20 t Assembly Press – Table 2,000 × 600 mm For sale is a compact sliding table press by Hidrobrasil with a pressing force of 20 t. The machine features a table size of 2,000 × 600 mm, a stroke of 600 mm, and a simple, precise hand lever control. Ideally suited for assembly, pressing, and light forming operations. ===== Technical Data & Details: Sliding Table Press Hidrobrasil – 20 t Assembly Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Sliding Table Press - Design: Assembly Press / Sliding Table Press - Pressing force: 20 t - Machine weight: approx. 3 t - Dimensions (L × W × H): approx. 3,500 × 1,200 × 2,800 mm ==== Working Area Hodpfx Aofxyi Sogxsl - Stroke: 600 mm ==== Table System - Table size: 2,000 × 600 mm - T-slots: according to DIN or customer specifications ==== Hydraulics - Operating pressure: 180 bar - Oil tank capacity: 100 l - Electric oil cooler - Enclosed hydraulic system ==== Speeds - Advancing speed: 9.9 mm/s - Return speed: 25 mm/s ==== Drive - Total power requirement: 3 kW ==== Control & Operation - Hand lever control - Adjustable speed - Pressure display via manometer (5") ===== Assembly operations, pressing operations, joining technology, light forming work, workshop applications, series production Sliding table press, assembly press, hydraulic press, press-fit press, workshop press, hydraulic ram press Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements by fully complying with all aspects of Brazil's national NR 12 safety guideline. Our key strengths are in custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. The hydraulic systems of our presses are equipped predominantly with components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 2019, stiskalna sila: 100 t, Straightening Press – Manufacturer Hidrobrasil – 100 t Assembly Press – Table 1,045 × 1,045 mm For sale is a versatile straightening and assembly press from Hidrobrasil with a pressing force of 100 t. The machine features an extendable table, a laterally movable cylinder unit, and a robust frame construction, making it ideal for straightening, assembly, and maintenance tasks. ==== Technical Data + Information: Straightening Press Hidrobrasil – 100 t Assembly Press Hedpfjffamxox Agxol ==== General Information - Manufacturer: Hidrobrasil - Model: Straightening Press - Design: Frame Press / Assembly Press - Pressing Force: 100 t - Machine Weight: approx. 6.6 t - Dimensions (L × W × H): approx. 2,550 × 2,850 × 3,620 mm ==== Working Area - Stroke: 1,000 mm - Installation Height: 1,600 mm - Passage: 1,200 mm - Height Above Floor: 600 mm ==== Table System - Table Size: 1,045 × 1,045 mm - Extendable Table: 800 mm - Table Speed: 50 mm/s - Travel Speed of Movable Table: 33 mm/s - Table Through Width: 180 mm - Clearance Depth Below Table: 400 mm - Transport Load: 1,000 kg - Table mounted on spring-loaded ball rollers ==== Cylinder and Ram - Piston Diameter: Ø 76 mm - Ram Diameter: Ø 110 mm - Ram Bore: 40 H7 - Cylinder laterally movable: 300 mm ==== Speeds - Idle Downstroke: 1 – 10 mm/s - Working Stroke: 3 mm/s - Return Stroke: 1 – 25 mm/s ==== Hydraulics - Operating Pressure: 250 bar - Pump Output: max. 24.9 l/min - Total Power Requirement: 5.5 kW - Oil Tank Volume: 200 l ===== Straightening work, assembly work, maintenance, shaft straightening, component machining, workshop applications, repair work Straightening press, assembly press, hydraulic press, frame press, workshop press, assembly press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all points of the Brazilian National Safety Directive NR 12, which is based on these standards. Our core strengths are special-purpose machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 30 t, širina mize: 600 mm, dolžina mize: 600 mm, skupna dolžina: 1.869 mm, skupna širina: 850 mm, skupna višina: 2.620 mm, skupna masa: 2.900 kg, Hidrobrasil C-Frame Press – 30 t – 600 × 600 mm – 400 mm stroke For sale is a single-column hydraulic press (C-frame press) by Hidrobrasil, featuring 30 t press force and a compact design. The machine offers a table size of 600 × 600 mm and is ideally suited for assembly, straightening, and pressing operations, as well as for small batch production in workshop and manufacturing environments. ===== Technical Specifications + Information: Hydraulic C-Frame Press – 30 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-column press - Design: C-frame press - Machine designation: Assembly press - Press force: 30 t - Machine weight: approx. 2.9 t ==== Working Area - Stroke: 400 mm ==== Table & Ram - Table dimensions: 600 × 600 × 100 mm - Clearance behind table: 50 mm - Table fixing points: 600 / 800 / 1000 mm ==== Speeds - Downstroke speed: 10 mm/sec - Return speed: 24 mm/sec ==== Hydraulics & Drive - Motor power: 3 kW - Oil tank: 60 l ===== Assembly work, pressing work, straightening, workshop applications, small batch production Hsdpfevhcyksx Agxol Hydraulic press, hydraulic single-column press, C-frame press, assembly press, industrial press

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, stiskalna sila: 200 t, Portal Gantry Straightening Press – Manufacturer Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm For sale is a versatile gantry straightening press from Hidrobrasil with a pressing force of 200 t. The machine features a large table area of 4,000 × 2,000 mm, a laterally traversable cylinder, and a longitudinally movable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data & Information: Gantry Straightening Press Hidrobrasil – 200 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Gantry Straightening Press - Design: Gantry press - Pressing force: 200 t - Working pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel - Cylinder lateral adjustment: max. 1,450 mm - Bridge longitudinal adjustment: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Design & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination of air and water cooling - Lift cylinders integrated in the work table - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostic system via touchscreen ==== Auxiliary System Lift Cylinder - Number of lift cylinders: 10 units - Rod diameter: 25 mm Hsdpfxoxrb Nbj Agxsl - Stroke: 80 mm - Actuation via hydraulic system or controller ==== Control & Operation - Siemens PLC: S7-1200 - Siemens touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Adjustment of stroke, pressure and holding time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety strip on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown in case of overtemperature (> 65 °C) - Filter monitoring - CE compliant ==== Hydraulics - Main drive: 5.5 kW - Oil volume: not included - Oil temperature control with automatic cooling ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special-purpose machine engineering, steel construction, maintenance, pressing work Gantry press, Straightening press, Hydraulic press, Industrial press, Special-purpose machine, Die tryout press, Tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which builds on these regulations. Our key strength lies in special-purpose machine construction and press automation. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0303, stiskalna sila: 160 t, dolžina mize: 550 mm, širina mize: 500 mm, delovna višina: 700 mm, Vulcanizing Press – Manufacturer Hidrobrasil – 160 t Heated Press For sale is a hydraulic vulcanizing press manufactured by Hidrobrasil, offering a maximum pressing force of 160 t. This machine features heated platens measuring 550 × 500 mm, a daylight opening of 700 mm, and a stroke of 400 mm, making it especially suitable for vulcanization, lamination, and thermal pressing processes in rubber and plastics processing. ==== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Type: Heated press / vulcanizing press - Pressing force: 160 t - Machine weight: approx. 4.2 t - Dimensions (L × W × H): 950 × 2,440 × 2,400 mm ==== Working Area - Daylight opening: 700 mm - Stroke / Travel: 400 mm - Table height above floor: 850 mm ==== Table and Ram - Table platen: 700 × 600 mm - Ram platen: 700 × 600 mm ==== Forces - Return force: 16 t ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulics - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Heating platen size: 550 × 500 mm - Electrically heated up to 200°C - Heating power: approx. 12 kW - Temperature sensors: 2 per heating plate - Temperature accuracy: ± 3°C in the 500 × 450 mm area - Heating platen manufacturer: ELKOM - Top and bottom platens separately controllable - Adjustable heating time - Automatic opening after heating time (optional) ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Equipment - Swiveling two-hand operation - Interior lighting - Pressure adjustment via rotary knob (10 steps) - Heating plates with T-slots (DIN 650, customer-specific) - Thermal insulation between heating plates and machine body ==== Options - Light curtains at front and rear: €6,800 - Rear monitored double door: €2,400 - Right side monitored door: €1,200 - Left side monitored door: €1,200 ===== Vulcanization, rubber processing, plastics processing, lamination processes, compression molding, thermal pressing, hot pressing Vulcanizing press, heated press, hydraulic press, rubber press, lamination press, compression press, thermo press, tryout press, tool tryout press Hsdpfxjfxyh Rs Agxjl Looking for a hydraulic press customized to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directive as well as the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed Canadian and European safety requirements, as they comply fully with the national Brazilian safety guideline NR 12, which builds upon these standards. Our core strength lies in special machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. Only components from leading European manufacturers are used in the press hydraulics.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, stiskalna sila: 120 t, dolžina mize: 600 mm, širina mize: 600 mm, Vulcanizing Press – Manufacturer Hidrobrasil – 120 t Heating Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 120 t. The machine features heating plates sized 600 × 600 mm, flexible pressure adjustment, as well as comprehensive control and safety functions, making it particularly suitable for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ===== Technical Specifications + Information: Vulcanizing Press Hidrobrasil – Heating Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heating press / Vulcanizing press - Pressing force: 120 t (max. 1,600 kN) - Pressure range: 30 – 120 t - Machine weight: approx. 9 t - Dimensions (L × W × H): approx. 2,000 × 1,000 × 2,800 mm - Table height above floor: 850 mm - Minimum hall height: 3,500 mm ==== Working Area - Stroke: 400 mm - Opening width per compartment: 200 mm - Min. opening: 200 mm ==== Table and Ram - Table size: 600 × 600 mm - Ram size: 600 × 600 mm - Heating plates: 600 × 600 mm (optional) ==== Forces - Free demolding force: max. 200 kN ==== Speeds - Rapid traverse speed: up to 40 mm/s - Opening speed: up to 40 mm/s - Pressing speed: 5 – 15 mm/s ==== Hydraulics - Operating pressure: max. 240 bar - Pressure buildup time: approx. 4 sec - Pressure buildup time (steel on steel): max. 8 sec - Pressure accuracy: ± 5 bar - Pressure holding valve: up to 1,800 sec - Automatic pressure adjustment - Oil volume: approx. 300 l (HLP 46) - Main pump: Bosch Rexroth gear pump approx. 48 l/min - Max. oil temperature: 55 °C - Max. ambient temperature: 40 °C ==== Cooling and Lubrication - Circulation oil cooling - Oil temperature monitoring - Automatic lubrication ==== Heating System - Electrically heated plates up to 250 °C (optional) - Thermal neutral: 80 – 120 °C ==== Controls and Operation - Control panel integrated in control cabinet - Two-hand operation - Programmable setup mode - Single stroke adjustable - Free positioning of the ram - Travel limit by pressure or position - Signal light (Red/Yellow/Green) ==== Safety - Light curtain (SICK / Leuze, 14.1 mm, front) - Monitored rear door - Machine body double-coated ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic motor connection: 15 kW - Total connected load: approx. 19 kW (without heating plates) ===== Hjdpsk S Dt Tsfx Agxjl Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing Vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermo press, try-out press, tool try-out press

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0329, stiskalna sila: 350 t, Hidrobrasil Four-Column Press – 350 t – 3,610 × 1,600 mm – Stroke 900 mm For sale is a hydraulic four-column press from manufacturer Hidrobrasil, delivering a pressing force of 350 t. This machine is engineered for continuous operation in industrial production processes, excelling with high traverse speeds, large clamping areas, and a powerful hydraulic system. Thanks to modern control technology and a spacious working area, it is ideally suited for demanding forming and series production applications. ===== Technical Data & Information: Hydraulic Four-Column Press – 350 t ==== General Information - Manufacturer: Hidrobrasil - Model: Four-Column Press - Design: Hydraulic column press - Machine type: Production press - Pressing force: 350 t - Machine weight: approx. 60 t - Dimensions (L × W × H): 2,660 × 5,400 × 5,700 mm ==== Working Area - Pass-through width: 3,000 mm - Max. working height: 1,700 mm - Stroke: 900 mm - Table height above floor: approx. 900 mm ==== Table & Ram - Table size: 3,610 × 1,600 mm - Ram size: 3,610 × 1,600 mm ==== Speeds - Approach speed: 230 mm/s - Return speed: 170 mm/s - Rapid traverse: 200 mm/s - Pressing speed: 21 mm/s ==== Hydraulics & Drive - Total connected load: 75 kW - Return force: 35 t - Oil tank capacity: 2,000 l - Oil cooling: electric, max. 3 kW ==== Control & Electrification - Control system: Siemens S7-1500 - Monitor: WEG, 12" ===== Hodpfjfxygzsx Agxel Forming technology, series production, large-part machining, deep drawing, industrial manufacturing Hydraulic press, hydraulic column press, four-column press, column press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your application requirements? Contact us for a personalized offer. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), comply with EC standards and EU safety regulations. Additionally, our presses surpass both Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which is based on these. Our core strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic system, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0116 - Rev.00, stiskalna sila: 110 t, Hidrobrasil Four-Column Hydraulic Press – 110 t – 1,730 × 1,100 mm – Stroke 1,500 mm For sale is a hydraulic four-column press from Hidrobrasil, offering a pressing force of 110 t. This machine is designed for versatile production and forming processes, featuring a large installation height, high travel speed, as well as a stable and precise construction. Ideal for operations requiring large tools and variable process requirements. ==== Technical Data & Information: Hydraulic Four-Column Press – 110 t ==== General Specifications - Manufacturer: Hidrobrasil - Model: Four-Column Press - Type: Hydraulic Column Press - Machine Designation: Production Press - Pressing force: 110 t - Machine weight: approx. 12 t - Dimensions (L × W × H): approx. 2,300 × 2,090 × 4,200 mm - Noise level: max. 67 dB ==== Working Area - Passage width: 1,300 mm - Max. working height: 1,500 mm - Stroke: 1,500 mm - Table height above floor: approx. 700 mm ==== Table & Ram - Table plate: 1,730 × 1,100 mm - Ram plate: 1,730 × 1,100 mm - Clamping plate thickness: 100 mm - Ram plate thickness: 100 mm - Column diameter: 140 mm ==== Speeds - Approach speed: up to 300 mm/s - Pressing speed: 15 mm/s ==== Hydraulics & Drive - Motor power: 18 kW - Return force: 11 t - Oil tank capacity: 150 l ==== Control & Electrical - Control: Siemens S7-1200 ==== Design & Execution - Machine body: RAL 7035 (Light Grey) - Moving parts: RAL 2009 (Orange) - Components: RAL 7021 (Dark Grey) - Enclosure/guard rail: RAL 1021 (Yellow) ===== Forming technology, series production, pressing processes, manufacturing, large part machining Hydraulic press, hydraulic column press, four-column press, column press, production press, industrial press, forming press Hodpfxsdxvfls Agxel Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery regulations and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they comply in all aspects with the Brazilian national safety guideline NR 12, which builds upon these standards. Our core competencies include special purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Stanje: novo, številka stroja/vozila: DF0279, stiskalna sila: 1.000 t, Hidrobrasil Four-Column Hydraulic Press – 1,000 t – 1,500 × 2,250 mm – Stroke 800 mm For sale is a hydraulic four-column press manufactured by Hidrobrasil, offering a press force of 1,000 t. Designed for heavy-duty industrial applications and high-load forming processes, this machine delivers reliable long-term performance thanks to its robust construction, high return force, and powerful hydraulics. Ideal for large-part processing and demanding series production. ==== Technical Data & Information: Hydraulic Four-Column Press – 1,000 t ==== General Information - Manufacturer: Hidrobrasil - Model: Four-Column Press - Design: Hydraulic column press - Machine type: Production press - Press force: 1,000 t - Machine weight: approx. 68 t Hjdpfxofxyiye Agxsl - Dimensions (L × W × H): 3,850 × 2,900 × 6,000 mm ==== Working Area - Clear width: 1,500 mm - Max. working height: 1,000 mm - Stroke: 800 mm - Table height above floor: approx. 1,300 mm ==== Table & Ram - Table size: 1,500 × 2,250 mm - Ram size: 1,500 × 2,250 mm ==== Speeds - Approach speed: 200 mm/s - Return speed: 200 mm/s - Rapid traverse: 200 mm/s - Pressing speed: 10 mm/s ==== Hydraulics & Drive - Total power requirement: 91 kW - Return force: 100 t - Oil tank capacity: 1,200 l - Oil cooling: electric, max. 1.5 kW ==== Controls & Electrical - Monitor: WEG, 12" ===== Heavy-duty forming, large-part processing, series production, industrial press, high-load applications Hydraulic press, hydraulic column press, four-column press, column press, production press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety standards, as they fully comply with the Brazilian national safety directive NR 12, which builds upon these requirements. Our core competency lies in custom machine construction and press automation. We offer tailored hydraulic presses at surprisingly competitive prices. Only high-quality components from leading European manufacturers are used in the hydraulic systems of our presses.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0277-Rev06, stiskalna sila: 10 t, Hidrobrasil vulcanizing press – 10 t – heating press – 660 × 210 mm – with heated plates For sale is a hydraulic vulcanizing press manufactured by Hidrobrasil with a pressing force of 10 t. The machine is designed for thermal processes such as vulcanization and hot-pressing applications, and features precisely guided heated plates as well as long-term pressure consistency. Thanks to its safety monitoring and robust construction, the press is ideally suited for reliable use in both laboratories and production environments. ==== Technical Data & Information: Hydraulic Vulcanizing Press – 10 t ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Machine description: Heating press Hjdpfxsffamyo Agxsl - Design: Single-column/column-type press - Pressing force: 10 t - Machine weight: approx. 1.5 t - Dimensions (L × W × H): approx. 2,000 × 1,420 × 760 mm ==== Working Area - Column clearance: 200 mm - Open height between heated plates: 200 mm - Stroke: 200 mm - Travel path: 200 mm ==== Heated Plates & Structure - Heated plates: 660 × 210 mm - Table height: 1,100 mm - Table plate thickness: 125 mm - Ram height: 250 mm - Plates ground flat (includes thermal insulation plates and clamping surfaces) ==== Construction & Guidance - Polished, chrome-plated guide columns - Parallel guidance through 250 mm bronze bushings - Counterweight system for smooth door operation ==== Process Parameters - Pressure consistency: up to 5 hours - Pressure tolerance: max. ± 5 % ==== Hydraulics - Oil tank: 70 l ==== Safety & Operation - Electronic door monitoring - Interlock: Ram movement only possible with door closed - Overheat protection for plate temperatures >50 °C - Manual override with safety release ("Burn risk" warning) ===== Vulcanization, hot pressing, thermal processes, laboratory applications, material testing Hydraulic press, vulcanizing press, heating press, laboratory press, production press, industrial press Looking for a hydraulic press tailored to your requirements? Contact us for an individual quote. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), EC norms, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety standards, as they fully comply with the national Brazilian safety guideline NR 12, which is based on these standards. Our key strength lies in custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Leto izdelave: 2018, stanje: novo, številka stroja/vozila: DF0246 Rev0, Tool Change Cart – Manufacturer Hidrobrasil – 20 t Load Capacity For sale is a tool change cart from Hidrobrasil with a maximum load capacity of 20 t. This cart is suitable for safe and efficient tool changes on presses and machine tools. Thanks to its hydraulically adjustable working height and variable width, the cart can be flexibly adapted to different tool sizes, enabling ergonomic handling of heavy tools in production environments. ===== Technical Data & Information: Tool Change Cart Hidrobrasil ==== General Specifications Hedpfx Agodxvfmjxel - Manufacturer: Hidrobrasil - Design: Tool change cart - Load capacity: 20 t - Dead weight: approx. 2 t ==== Dimensions - Overall dimensions (L × W × H): 1,920 × 2,818 × 1,140 mm - Max. tool dimensions: 2,500 × 1,800 mm ==== Adjustment Ranges - Width adjustable: 1,000 – 2,000 mm - Height adjustable via hydraulic pump: 700 – 1,200 mm ==== Drive and Mechanics - Motor power: 2.2 kW - Spindle diameter: 70 mm ===== Tool change for presses, tool handling, tool transport, tool change station, die handling, mold change Tool change cart, tool change station, tool transport cart, tool handling cart, die cart, tool change table, die change cart Looking for a hydraulic press tailored to your specific application? Contact us for a custom quote. Our hydraulic presses are manufactured in accordance with German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our core strengths include custom machine engineering and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0303, stiskalna sila: 160 t, dolžina mize: 550 mm, širina mize: 500 mm, delovna višina: 550 mm, Vulcanizing Press – Manufacturer Hidrobrasil – 160 t Heated Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 160 t. The machine features electrically heated platens measuring 550 × 500 mm, a maximum working height of 550 mm, as well as a modern control system with recipe management. It is particularly suited for vulcanization, lamination, and thermal pressing processes in rubber and plastics processing. ==== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heated Press / Vulcanizing Press - Pressing force: 160 t - Machine weight: approx. 4.3 t - Dimensions (L × W × H): 1,150 × 2,600 × 2,400 mm ==== Working Area - Column gap: 700 mm - Max. working height: 550 mm - Stroke / travel: 400 mm - Table height above floor: 900 mm ==== Table and Ram - Table plate: 700 × 600 mm - Ram plate: 700 × 600 mm - Heating plates: 550 × 500 mm (with 2 temperature sensors) ==== Forces - Return force: 16 t ==== Speeds - Approach speed: 50 mm/s - Pressing phase speed: 10 mm/s - Rapid traverse speed: 50 mm/s - Return speed: 50 mm/s ==== Hydraulics - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Electrically heated plates up to 200 °C - Heating power: approx. 12 kW - Temperature range: 100 – 200 °C (in 5 °C increments) - Temperature accuracy: ± 3 °C - 2 temperature sensors per heating plate - Upper and lower plates individually controllable - Adjustable heating time - Automatic opening after heating cycle ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Control System - Siemens S7-1200 - Monitor: 12-inch - Freely programmable positions: - Upper stop / speed change - Pressure build-up A / pressure release - Pressure build-up B / pressure release - Lower stop - Pressure and venting time freely adjustable - Pressure hold time up to 20 minutes - Recipe management: 25 programs storable - Expandable via USB ==== Equipment Hodpfofxygpsx Agxol - Swiveling two-hand operation - Interior lighting - Pressure adjustment via rotary switch (10 levels) - Platens with T-slots as per DIN 650 (customizable) - Thermal insulation between platens and machine frame ==== Options - Rear double door with monitoring: €2,400 - Right-side monitored door: €1,200 - Left-side monitored door: €1,200 ===== Vulcanization, rubber processing, plastics processing, lamination, compression molding, thermal pressing, hot pressing Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, compression press, thermo press, tryout press, tool tryout press Looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our key strengths are in special-purpose machine construction and press automation.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina mize: 1.500 mm, dolžina mize: 1.000 mm, širina plošče bata: 1.500 mm, hitrost vzvratne vožnje: 10 mm/s, dolžina plošče bata: 1.000 mm, potovalna razdalja osi X: 1.200 mm, vrsta vhodnega toka: Klimatska naprava, stiskalna sila: 40 t, moč: 9 kW (12,24 KM), Oprema: varnostna svetlobna zapora, Spotting Press – Manufacturer: Hidrobrasil – 40 t Sliding Table Press – Table 1,500 × 1,000 mm For sale is a hydraulic spotting press from Hidrobrasil with a pressing force of 40 t. The machine is designed as a mold opener/closer and features an extendable table, a 180° rotatable ram, and a large daylight opening of 1,800 mm, making it especially suitable for spotting, adjustment, and tryout work on heated tools. ===== Technical Data & Information: Spotting Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Sliding Table Press / Mold Opener-Closer - Pressing Force: 40 t - Machine Weight: approx. 13 t - Installation Height: approx. 3,800 mm ==== Working Area - Maximum Daylight Height: 1,800 mm - Ram Stroke: 1,500 mm Hsdpfxjtwmp Sj Agxjl ==== Table and Ram - Table Size: 1,500 × 1,000 mm - Ram Size: 1,500 × 1,000 mm - Ram Rotation: 180° - T-slots: according to customer specification ==== Table System - Table extension: 1,200 mm - Table traverse speed: 30 mm/s ==== Forces - Adjustable pressure: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Controls and Operation - Siemens control system - Monitor: 10" in control cabinet - Pressure adjustment and warning messages via display - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety - Safety components from SICK ==== Equipment - Clamping plate insulation (resin insulation plate + ventilation plate) - Custom color scheme on request - EU-compliant design ==== Operating Conditions - Maximum ambient temperature: 40 °C ===== Spotting, tool adjustment, tryout operations, mold making, toolmaking, tryout work, fine-tuning processes, heated tools Spotting press, tool tryout press, sliding table press, mold opener, tryout press, tool adjustment press, hydraulic press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which builds on these regulations. Our core strength is special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. Hydraulic components are predominantly sourced from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, stiskalna sila: 400 t, Hidrobrasil Double-Column Hydraulic Press – 400 t – 1,500 × 1,500 mm – Sliding Table Press with Ejector For sale is a double-column hydraulic press with sliding table from Hidrobrasil, providing a press force of 400 t. This machine is specifically designed for demanding forming and pressing operations. Its movable table and integrated ejector allow for high flexibility in tool handling. Equipped with modern controls, high precision, and extensive safety features, it is ideally suited for industrial series production and complex applications. ===== Technical Data & Information: Hydraulic Double-Column Press – Sliding Table Press – 400 t ==== General Information - Manufacturer: Hidrobrasil - Model: Double-Column Press - Machine designation: Sliding Table Press Hsdpfx Agjph Uk Njxjl - Design type: Double-column - Press force: 400 t (4,000 kN) - Machine weight: approx. 28 t - Dimensions (L × W): approx. 3,800 × 4,475 mm - Overall height: approx. 4,300 mm - Number of operator sides: 1 ==== Working Area - Max. opening: 800 mm - Stroke: 800 mm - Table height above floor: 1,100 mm - Minimum hall height: 5,500 mm - Parallelism tolerance: ± 0.1 mm ==== Table & Ram - Table size: 1,500 × 1,500 mm - Ram size: approx. 1,600 × 1,500 mm - Table plate: machined flat with T-slots (DIN 650-22) - Table ejector: 20 t / 350 mm stroke - Ejector moves out with the table ==== Speeds - Closing speed: up to 100 mm/sec - Opening speed: up to 100 mm/sec - Pressing speed: 3–10 mm/sec ==== Hydraulics & Power - Operating pressure: max. 300 bar - Main pump: Bosch Rexroth axial piston pump (approx. 145 l/min) - Auxiliary pump: Bosch Rexroth gear pump (10 l/min) - Pressure hold time: up to 300 sec - Main motor: 40 kW - Oil capacity: approx. 1,000 l - Oil temperature monitoring: warning at 55 °C, shutdown at 60 °C ==== Controls & Operation - Control system: Siemens S7-1200 - Touchscreen: 9" monitor - Remote maintenance: SECOMEA Ethernet - Operating modes: setup, single stroke, automatic/cycle - Pressure setting: 60–400 t via touchscreen - Stroke limitation by pressure or position - Free ram positioning - Swivel-mounted control panel - Two-hand operation with function selection ==== Safety & Equipment - Light barriers: SICK / PILZ (14 mm, up to 1,800 mm height) - Hydraulic and mechanical ram safety locks - Automatic lubrication - Recirculating oil cooling - Side doors with viewing windows (1,000 × 800 mm) ==== Construction & Features - Precise deflection: ≤ 0.2 mm/m - Robust construction for continuous operation - Suitable for demanding forming and series production ===== Forming, Series Production, Toolmaking, Pressing, Sheet Metal Processing Hydraulic press, double-column press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our strength is custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. Our presses are predominantly equipped with hydraulic components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, stiskalna sila: 300 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 300 t Gantry Press – Table 2,500 × 1,600 mm For sale is a high-performance portal straightening press from Hidrobrasil with a press force of 300 t. The machine features a movable bridge construction, a laterally movable cylinder, as well as a robust grid table design, making it ideal for precise straightening, assembly, and heavy-duty applications. ==== Technical Specifications & Information: Portal Straightening Press Hidrobrasil – 300 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry Press / Double-column press - Press force: 300 t (3,000 kN) - Machine weight: approx. 22 t - Dimensions (L × W × H): 4,500 × 2,300 × 3,700 mm ==== Working Area - Table size: 2,500 × 1,600 mm - Open height: 700 mm - Stroke: 700 mm - Table height: approx. 900 mm ==== Construction & Equipment - Movable bridge via rack and pinion with two gear motors - Cylinder laterally movable via rack and pinion - Table in grid construction - T-slots according to customer specification (standard: 22 mm) - Induction-hardened cylinder - Machine body double-coated - Lubrication via grease nipples Hodpfx Agoh Agnuoxsl - Operation via swivel arm on the bridge - Pressure setting via monitor (50 – 300 t) - Oil temperature display on the tank ==== Forces & Accuracy - Free tearing force: 500 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: max. 3 s (steel on steel) ==== Speeds - Pressing speed: approx. 8 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 55 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 93 l/min - Operating pressure: max. 350 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 ==== Electrical Equipment - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor power: 22 kW (IE3) - Total connected load: approx. 30 kW ==== More Information - Thermal working range: 80 – 120 °C - Operating sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,000 mm ===== Straightening work, assembly work, heavy-duty machining, forming technology, steel construction, toolmaking, maintenance Gantry press, straightening press, double-column press, hydraulic press, industrial press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they comply in all aspects with the national Brazilian safety regulation NR 12, which is based on these. Our greatest strength is special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we primarily use components from leading European manufacturers.