Stiskalnica z drsno mizo

Hidrobrasil Viersäulenpresse

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, stiskalna sila: 400 t, Hydraulic 400-ton column press suitable for continuous shift operation, with the following basic specifications: a) Closing speed: 100 - 450 mm/sec b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen) d) Accumulator with approx. 4 nitrogen bottles e) Table size (clamping area): 2700 x 1700 mm (front view, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots as per customer specification h) Table, ram, and press head are stress-relieved annealed i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping area 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 mm (floor area) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light curtains 14 mm on front and rear sides p) Recirculating oil cooling (adjustable via touchscreen) q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision-milled s) Side-monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m away from the press u) Pressure adjustment from 50 to to 400 to (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programming mode, setup mode, single stroke + continuous stroke (selectable via rotary switch) x) Swiveling operator panel with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine body primed and painted bb) Installation, commissioning, and training available at extra cost The hydraulics of the presses we offer are completely assembled using components from BOSCH-REXROTH/Parker/HAWE. Only components (SIEMENS) that are readily available in Germany are used in the control cabinet. All safety equipment, except the light curtains, is supplied by SICK. The control system is supplied by SIEMENS (S7 1500) including the 15-inch touchscreen monitor. The SIEMENS remote maintenance unit SECOME-Ethernet is included in the scope of delivery. SPECIAL FEATURE: Our design, featuring two press cylinders and the accumulator, allows full performance with a main motor of just 90 kW. Please refer to section 1.3 for technical details. Technical Data Design Type of press: Column press Thermally neutral: 80 – 120°C Number of operator sides: 2 Forces Press force max.: 4,000 kN Free opening force max.: 600 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions – intended minimum tool height: 600 mm Max. opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Gjdpfx Aog Iihwjgyobi Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 tons Speeds (see attached cycle diagram) Rapid closing: 100 - 450 mm/s Pressing speed at F max.:

Stanje: novo, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will prepare an attractive offer including installation and service. Over the past years, ISGEC has supplied to more than 26 countries, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to your enquiry. Gjdpfx Aof Rt Irsgysbi

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0329, stiskalna sila: 350 t, Pressure: 350 t Clear width: 3000 mm Stroke: 900 mm Gedpfefxygzsx Agyobi Total power requirement: 75 kW Machine weight approx.: 60 t Dimensions L x W x H: 2660 x 5400 x 5700 mm Return force: 35 t Table size: 3610 x 1600 mm Ram size: 3610 x 1600 mm Table height above floor approx.: 900 mm Forward speed: 230 mm/sec Return speed: 170 mm/sec Oil tank: 2000 l Max. working height: 1700 mm Pressing speed: 21 mm/sec Rapid traverse speed: 200 mm/sec Oil cooling (electric): 3 kW (max) Control: SIEMENS S7 1500 Monitor: WEG 12 inch

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0116 - Rev.00, stiskalna sila: 110 t, Press force: 110 t Clear width: 1300 mm Stroke: 1500 mm Machine weight approx. (without operating fluids): 12 t Dimensions (L x W x H): approx. 2300 x 2090 x 4200 mm Return force: 11 t Max. working height: 1500 mm Ram plate: 1730 x 1100 mm Table plate: 1730 x 1100 mm Table height above floor approx.: 700 mm Gbsdpfjdxvfljx Agyji Column diameter: 140 mm Ram plate thickness: 100 mm Clamping plate thickness: 100 mm Noise level (max.): 67 dB Machine body colour: RAL 7035 Moving parts colour: RAL 2009 Other components colour: RAL 7021 Cladding and balcony colour: RAL 1021 Motor power: 18 kW Max. approach speed: 300 mm/sec Pressing speed: 15 mm/sec Oil tank: 150 l Control system Siemens: S7 1200

Stanje: dober (rabljeno), Leto izdelave: 2000, skupna višina: 47.000 mm, skupna širina: 27.000 mm, skupna dolžina: 25.000 mm, širina mize: 1.000 mm, dolžina mize: 1.800 mm, skupna masa: 43.000 kg, širina plošče bata: 600 mm, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Sick light barrier Separate Rittal control cabinet Side walkways/access passages Gbedpotiwgisfx Agyei Floor-level installation

Stanje: novo, številka stroja/vozila: DF0279, stiskalna sila: 1.000 t, Pressure: 1000 t Clear width: 1500 mm Stroke: 800 mm Total power requirement: 91 kW Machine weight approx.: 68 t Gsdpfjfxyiysx Agyjbi Dimensions (L x W x H): 3850 x 2900 x 6000 mm Return force: 100 t Table size: 1500 x 2250 mm Ram size: 1500 x 2250 mm Table height above floor approx.: 1300 mm Forward speed: 200 mm/sec Return speed: 200 mm/sec Pressing speed: 10 mm/sec Oil tank capacity: 1200 l Oil cooling (electrical): 1.5 kW (max) Max. working height: 1000 mm Rapid traverse speed: 200 mm/sec Monitor (WEG): 12 inch

Stanje: rabljeno, Leto izdelave: 2019, stiskalna sila: 250 t, Pressure: 250 t Passage width: 2500 mm Stroke: 500 mm Total power requirement: 60 kW Approx. machine weight: 39 t Dimensions (L x W x H): 2720 x 3750 x 4350 mm Return force: 25 t Max. working height: 800 mm Table size: 3090 x 1500 mm Ram size: 3090 x 1500 mm Table height above floor approx.: 1000 mm Advance speed: 400 mm/sec Pressing speed: at 125 t, 50 mm/sec Return speed: 400 mm/sec Rapid traverse speed: 400 mm/sec Oil tank: 1500 l Oil cooling (electric): 3 kW (max) Vibration damping plates: each 450x450x85 mm Pressure: 250 t at 220 bar t/bar Pump capacity max.: 176 l/min Recommended oil: 46 grade / 10 μm Hydraulics by Bosch Rexroth or other German manufacturers: Parker, Hydac SIEMENS control: included Light curtains by Schmersal/Pilz: Pilz Monitor: Omron 12 inch Vibration damping plates: The machine is mounted on four special damping plates, each measuring 450x450x85 mm. Oil tank with oil cooling: The tank has a volume of 1500 l. The oil is cooled by a dedicated pump, which switches on at 40°C. Oil filter system: Independent of the main and cooling pumps, the press has a dedicated filter circuit. The pump operates continuously, but requires only 1.5 kW. Energy saving function: If the main pump is not required for a set period, it switches to energy-saving mode, then using only about 2 kW/h. Full performance is immediately available again when pressure is needed. Safety technology: The safety components are supplied by Pilz. The light curtains are from the same manufacturer. Control cabinet: The control cabinet has 40% of its volume reserved for retrofitting. All cabinet components are supplied by Schneider. Screws: All screws used in the machine are zinc-plated or yellow galvanized. Oil tray: The hydraulic block and pump are positioned in a small oil tray so that any oil can be collected during repairs or hose changes. Noise emission: The press emits a maximum of 75 decibels according to standards. Accessories: Godpfx Aod Nq Idsgysbi Roller loading bridges: Two roller loading bridges, each 1500 mm long, removable, supports fitted with large, heavy-duty steel castors. Parallelism monitoring: Both cylinders are monitored by Balluff displacement measurement systems and Sick wire-draw encoders. Parallelism monitoring is activated at the start of the pressing operation. Monitoring precision can be configured in the control system. The function is deactivated during idle runs. The position of the ram is measured left and right at the ends by two SICK cable-pull encoders. The control system then opens or closes the oil flow to the cylinders via special fast-acting valves. The achievable parallelism accuracy will be under 1 mm across the entire width.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, vhodna napetost: 400 V, notranja višina: 180 mm, notranja dolžina: 900 mm, notranja širina: 630 mm, skupna višina: 440 mm, skupna dolžina: 1.380 mm, skupna širina: 1.000 mm, vrsta vhodnega toka: trifazni, NOVO Etažna peč NOVO Model Modul 2-68 Modularna etažna peč s keramično kamnito ploščo za pekače 1 x 60x80 / 2 x 60x40 na etažo Programirljivo upravljanje z nočnim zagonom Mere pečice znotraj: 630x900x180 mm, ŠxGxV na etažo Izvedba iz nerjavečega jekla Temperatura do max. 350°C samo pri nas preverjeno po DGUV V3 Priključek 400V, 9 kW, 2 x 16A-CEE vtič Dimenzije: 1000 x 1380 x 440 mm, ŠxGxV (etaža) Nov aparat & SAB preverjeno z jamstvom + storitev rezervnih delov Priključek za vodo 3/4 cola, odtok vode DN 40 Možnosti: Leasing & najem storitev Izpušna napa Izpušna napa s kondenzatorjem Podnožje na kolesih s polico za pekače Odvod / električno Gsdpotp D T Nefx Agyobi Komora za vzhajanje Pripomoček za odvod Ročni nakladač Vzdrževalna pogodba Dostavna služba Uvajanje / zagon Druge etažne peči na zalogi!

Stanje: novo, stiskalna sila: 100 t, Pulverpresse Druck: 100 t Durchgangsbreite: 700 mm Hub: 450 mm Maschinengewicht ca.: 6 t Abmessungen L x B x H: ca. 3000 x 1210 x 3100 mm Rückzugskraft: 10 t Motorleistung: 22 kW Max. Arbeitshöhe: 850 mm Geschwindigkeit Vorlauf max.: 1 - 100 mm Geschwindigkeit Rücklauf: 1 - 100 mm/sec Gjdpefxyhqsfx Agyjbi Geschwindigkeit Druckphase : 1 - 10 mm/sec. Stößelplatte: 1090 x 600 mm Tischplatte: 1090 x 600 mm Positioniergenauigkeit: 0,1 mm Tischhöhe über Boden ca.: 800 mm Öltank: 300 l Ölkühlung (elektrisch): 1,5 kW (max) Auswerfer: d=100 mm Auswerferhub: 210 mm Auswerfer-Druck: 100 t Anzahl der Auswerferstifte: 1 Stück Monitor WEG: 15 Zoll Hydraulik und Tank oben auf der Presse.: 2.000,-- ? Umlaufender Wartungsbalkon: 2.400,-- ? Siemens S7 1500: 3.000,-- ? Ölauffangwanne: 2.400,-- ? Heizkreisanschlüsse (3 Stück), überwacht, m. Zeiteinstellfkt.: 5.800,-- ?

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0280, stiskalna sila: 160 t, Pressure: 160 t Passage width: 1000 mm Stroke: 800 mm Total power requirement: 22 kW Machine weight approx.: 13 t Dimensions (L x W x H): 2300 x 2850 x 4000 mm Return force: 16 t Table size: 1430 x 1000 mm Ram size: 1430 x 1000 mm Table height above floor approx.: 850 mm Approach speed: 200 mm/sec Return speed: 200 mm/sec Pressing phase speed: 15 mm/sec Oil tank: 400 l Oil cooling (electric): 1.5 kW (max) Gedpfx Agjd Ap Udsysbi Max. working height: 1000 mm Rapid traverse speed: 200 mm/sec Monitor WEG: 10 inch

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, skupna masa: 35.000 kg, Ковашки чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Gbsdpfx Aetgpdzogyoi