Stiskalnica za ogrevanje

Hidrobrasil Vulkanisierpresse

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0303, stiskalna sila: 160 t, Pressure: 160 t Clear width between uprights: 700 mm Stroke: 400 mm Return force: 16 t Motor power: 15 kW Travel path: 400 mm Max. working height: 550 mm Ram plate: 700 x 600 mm Table height above floor: 900 mm Table plate: 700 x 600 mm Approach speed: 50 mm/sec Pressing speed: 10 mm/sec Rapid traverse speed: 50 mm/sec Oil cooling (electric): 1.5 kW (max) Oil tank: 300 l Machine weight approx.: 4.3 t Dimensions (L x W x H): 1150 x 2600 x 2400 mm Ejector: 30 x 30 mm Ejector stroke: 150 mm Ejector force: 15 t Ejector speed: 25 mm/sec Number of ejector pins: 1 piece Heating plates (L x W) with 2 diagonal temperature sensors: 550 x 500 mm Siemens control system: S7 1200 Monitor: 12 inch Rear monitored double door: 2400 mm Side right monitored door: 1200 mm Side left monitored door: 1200 mm The heating plates measure 550 x 500 mm, electrically heated up to 200 degrees Celsius and insulated from the machine body. The heating plates have 12 mm T-slots according to DIN 650, slot design customizable as per customer specifications. Each plate is equipped with 2 temperature sensors for precise heating performance within 500 x 450 mm, with a tolerance of ±3 degrees. Pressing force is adjustable in 10 steps via a rotary dial. Return speed is 50 mm/sec. The two-hand control is mounted on the machine body and is both rotatable and swiveling. Interior lighting included. Heating time is freely adjustable. Heating power approx. 12 kW. Desired temperature can be set as needed. Both the upper and lower heating plates can be independently controlled. Upon completion of the heating cycle, an audible signal sounds and the press opens automatically if desired. Control System: Positions freely adjustable: 1. Upper stop point - Speed change position Gtodpfjfxygpsx Ab Ejw 2. Pressure build-up A - Pressure relief 3. Pressure build-up B - Pressure relief Lower stop point For positions 2 & 3, pressure and venting time are freely selectable. Pressure holding time adjustable up to 20 minutes. Heating power adjustable from 100 to 200 degrees in 5-degree increments. 25 recipes can be stored in the control system. Additional recipes can be saved on a USB stick.

Leto izdelave: 2023, stanje: kot nova (razstavni stroj), Underfloor press Pressing force: 300 kN Pressing area: 300 x 300 mm Gjdpfxskuz T Uo Ab Ejtw Specific pressure: 3.3 N/mm² Opening: 200 mm Heating plate: solid steel heating plate Electrically heated up to 250°C Control system: Siemens S7-1200 with 12" touch panel Mechanical safety gate Data recording

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, skupna višina: 2.500 mm, višina mize: 900 mm, hitrost stiskanja: 8 mm/s, stiskalna sila: 50 t, skupna masa: 2.900 kg, obratovalni tlak: 250 letvica, širina plošče bata: 498 mm, dolžina mize: 522 mm, širina mize: 522 mm, vrsta vhodnega toka: Klimatska naprava, moč: 10 kW (13,60 KM), vhodna napetost: 400 V, tabela razdalj do bata: 600 mm, kapaciteta rezervoarja za olje: 130 l, obratovalna hitrost: 8 mm/s, Oprema: varnostna svetlobna zapora, If the press does not exactly meet your requirements, please request a customized quotation with just one click: Contact us for a tailored offer. Hidrobrasil manufactures presses precisely according to your specifications—at surprisingly competitive prices! #### 50 T Top Ram Heated Press, double-column design, suitable for continuous operation, with the following basic specifications: - Single heating level - Idle speed up to 10 mm/sec (adjustable via rotary control) - Opening speed up to 40 mm/sec - Pressing speed starting at 8 mm/sec - Table/heating plate size: 522 mm deep x 522 mm wide - Ram/heating plate size: 498 mm deep x 498 mm wide - 2 electrically heated plates, up to 200°C - Oil temperature monitoring - Hydraulic system with recirculating oil cooling - Pressure holding valve: 0 to 3600 sec - Pressure adjustment from 8 T to 50 T (50 T = 300 bar) - Stroke limitation selectable via pressure or position - Two-hand control, adjustable or fixed mounted - Machine body double-coated - Signal light: Red = Alarm, Yellow = Heating phase, Green = Ready - Heating plates with electric heating rods, up to max. 200°C - Setup, commissioning, and operator training available at extra charge ### Technical Data ## Construction - Press type: Double-column press ## Thermally Neutral - Temperature range: 80–120°C ## Operating Side - Number of operator sides: 1 ## Forces - Max. pressing force: 500 kN - Max. free opening force: 20 kN - Pressure build-up time: Max. 3 sec (closed tool steel on steel) ## Dimensions - Max. opening width: 600 mm - Stroke and min. opening: 300/300 mm - Table height above floor with heating plate: 900 mm - Overall height above floor: approx. 2,500 mm - Minimum hall height: 3,500 mm - Parallel deviation at 20°C: +/- 0.1 mm - Deflection: < 0.2 mm/m (determined at max. closing force with 70% loading) - Total weight (without operating fluids): approx. 2.9 t - Accessories: 2 heating plates (522 × 522 mm and 498 × 498 mm, max. heating power) - Heating plates equipped with temperature sensors: up to 200°C ## Speeds - Rapid close: 10 mm/sec - Max. pressing speed: 8 mm/sec ## Sound Pressure - Sound pressure level measured at 1.5 m height at the control panel (DIN 45635 T16 KL3): max. 78 dB(A) ## Hydraulics - Number of press cylinders: 1 - Max. operating pressure: 250 bar - Pressure build-up time: Max. 3 sec - Pressure accuracy during pressing stroke: +/- 5 bar - Main pump: BOSCHREXROTH gear pump, approx. 26 L/min - Oil volume: approx. 130 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C - Feed temperature: not specified - Automatic pressure readjustment for 5% pressure loss - Pressure holding for up to 3600 sec ## Electrical - Main power supply: 400 V AC Gedpjtwv S Nsfx Ab Ejtw - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 7.5 kW - Total connected load (excluding heating plates): approx. 10 kW Description of the Heated Press: The Hidrobrasil heated press with a pressing force of 50 tons and a table size of 600x600 mm is specifically designed for industrial applications. This is a double-column oil-hydraulic press, equipped with a sliding table mounted on spring-loaded rollers. The press is highly suitable for a variety of pressing processes, providing precise and reliable operation.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0277-Rev06, stiskalna sila: 10 t, Pressure: 10 t Column gap: 200 mm Stroke: 200 mm Approx. machine weight: 1.5 t Space requirement approx.: 2000 x 1420 x 760 mm Heating plates (L x W): 660 x 210 mm Clear opening height between the heating plates: 200 mm Travel (between the heating plates): 200 mm Oil tank: 70 l Table height: 1100 mm Gjdpfx Ajffamyeb Eotw Table plate resting on cross beams: 125 mm Ram height: 250 mm On the left and right sides inside the housing, there is a counterweight connected to the window frame via a wire rope running over a pulley. This allows the window to be opened effortlessly and to be held securely at any desired height. Both plates, together with the thermal insulation panels, heating plates, and the actual ram/table, are ground flat. Polished, chrome-plated guide columns on the left and right, over which the ram is held parallel by 250 mm high bronze guides. Constant pressure holding for up to five hours, with a tolerance of max. 5%. electronic door monitoring The vertical door is monitored by the safety control. The closing mechanism only allows ram movement when the door is closed. Additionally, the closing mechanism prevents the door from opening when the heating plates are hotter than 50 degrees Celsius. However, this function can be intentionally overridden by the operator, who must press and hold a switch for 10 seconds, clearly labeled: "Door release – risk of burns!".

Leto izdelave: 2004, stanje: dober (rabljeno), številka stroja/vozila: UP 20_LIND, Used Motoman HP20 Model: HP 20 Controller: NX100 Year of manufacture: 2004.09 Gsdpfofd Drrsx Ab Eetw Payload: 20 kg

Stanje: novo, številka stroja/vozila: DF0238 - Rev.00, stiskalna sila: 20 t, Pressure: 20 t Passage width: 400 mm Stroke: 300 mm Gedpfefxyhbox Ab Ejtw Machine weight approx. (without operating fluids): 3 t Dimensions L x W x H: 2200 x 650 x 2540 mm Drive power: approx. 4.5 kW Table plate: 400 x 400 mm Ram plate: 400 x 400 mm Clear height: 300 mm Table height above floor approx.: 950 mm Pressure adjustment (in 2t increments): 2 - 20 t Control system Siemens: S7 1500 Equipment: Automatic vertical door Electric oil cooler for hydraulic oil Warm air extraction with 150 mm extraction nozzle, with fan, outlet on top of press Heating plates separately controllable. Max. heating power 300 degrees, digital display, adjustable from 50 to 300 degrees in 5-degree increments Tolerance ±5 degrees Constant pressure control with 5% tolerance Cooling by built-in circulation pump, monitored, connection to external water supply Functions: Pressure, speed, temperature, heating time, and hold positions adjustable via control Ventilation intervals can be set All data is documented and can be exported as an EXCEL file. At an additional cost of €15,000, we can supply the machine with a built-in high-capacity cooling unit.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, stiskalna sila: 120 t, Here are the technical specifications of the offered machine: Technical Data & Information: • Pressing force: 120 tonnes • Idle speed: up to 40 mm/sec • Opening speed: up to 40 mm/sec • Initial pressing speed: 5–15 mm/sec • Table size/heating plate size: 600 × 600 mm • Ram size/heating plate size: 600 × 600 mm • 2 heating plates, electrically heated, up to 250°C – OPTIONAL • Overall dimensions approx. 2000 × 1000 × 2800 mm (H) • Oil temperature monitoring • Automatic lubrication • Free positioning of the ram • SICK/LEUTZE light curtains 14.1 mm, front side • Oil circuit cooling • Pressure holding valve 0 to 1800 sec. • Rear door with monitoring • Adjustable pressing force from 30 t up to 120 t • Stroke limitation selectable by pressure or position • Programming setup mode, single stroke (adjustable via rotary switch) • Operator panel integrated in control cabinet • Dual-hand operation • Machine frame double-painted • Signal light system: Red: Alarm, Yellow: Off phase, Green: Ready • Heating plates with electric heating elements, up to max. 250°C • Installation, commissioning, and operator training available at additional cost Thermal neutral range: 80–120°C Number of operator sides: 1 side Force Values Maximum pressing force: 1,600 kN Maximum tear-off force: 200 kN Pressure build-up time (closed tool / steel on steel): max. 8 sec. Dimensions Max. opening width per chamber: 200 mm Stroke and minimum opening per chamber: 400/200 mm Table height above floor without heating plates: 850 mm Overall height above floor (installation height): approx. 2,800 mm Minimum hall height: 3,500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Total weight of press (without operating fluids): approx. 9 t Sound pressure level, measured at 1.5 m height at the control panel (per DIN 45635-T16-KL3): max. 8 dB(A) No. of press cylinders: 1 Max. working pressure: 240 bar Pressure build-up time (press): 4 sec. Pressure accuracy during pressing stroke: +/- 5 bar Main pump BOSCH REXROTH gear pump approx. 48 L/min Oil volume: approx. 300 liters HLP 46 MW Ambient temperature max.: 40°C Oil temperature max.: 55°C Automatic pressure compensation after 5% pressure drop. Constant pressure holding for up to 1800 sec. Electrics Main supply: 400 V AC control voltage Hydraulic pumps 24 V DC 24 V DC Frequency: 50 Hz Connection hydraulic main motor: 15 kW Total connected load (without heating plates): 19 kW ##### If this press does not exactly match your requirements, please click to request a customized offer tailored to your needs: Contact us for a customized quote HIDROBRASIL manufactures presses exactly to your specifications at surprisingly affordable prices! Gtodpfxjk S Dt Te Ab Eow Our core competency is in custom machine building and press automation. We supply tailor-made hydraulic presses, press brakes, and guillotines at surprisingly affordable prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2025, premer valja: 140 mm, dolžina valja: 1.570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital readout for rear roll movement - Digital readout for bottom roll movement (material clamping) - Hardened rolls Gtsdegg Nv Ispfx Ab Ejw - Conical rolling - Brake motor - Emergency stop - Documentation - 400V

Stanje: dober (rabljeno), Leto izdelave: 2000, skupna višina: 47.000 mm, skupna širina: 27.000 mm, skupna dolžina: 25.000 mm, širina mize: 1.000 mm, dolžina mize: 1.800 mm, skupna masa: 43.000 kg, širina plošče bata: 600 mm, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Sick light barrier Separate Rittal control cabinet Side walkways/access passages Gedpfxjtiwgio Ab Eetw Floor-level installation

Leto izdelave: 1993, stanje: rabljeno, Bending length: 3,000 mm Clearance between uprights: 2,750 mm Max. pressing force: 180 t Control system: CYBELEC DNC70 Godpekh Niqsfx Ab Estw Throat depth: 220 mm Total power requirement: 15 kW Machine weight: 11,000 kg