Mep Maschine Italien nakup rabljenega (138)

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 x 250 mm Cutting capacity at 60° flat: 170 x 170 mm Cutting capacity at 60° square: 170 x 170 mm Cutting capacity at 60° round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semiautomatic electrohydraulic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel mounted on an articulated arm. - Low voltage operating unit: - Polyester membrane keypad with thermoformed raised pushbuttons and actuation feedback signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Cutting time per cycle * Saw band motor current draw * Saw band tension * Saw band speed Kjdpfjfg E H Uex Agfjdt * Numeric display of head position. - Manual 24V IP55 cycle selector switch. - Complete cycle program for all special cutting operations. - Identification of additional special cutting cycles for specific applications. - Latest generation, high-performance hydraulic control unit with low energy consumption. - Rotating table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Two band speeds (40/80 m/min.) with control system. - Designed to accommodate an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Bow stroke programmable directly from the control panel for adaptation to the material being cut. - Sliding clamping device, adjustable left and right, with quick-release vice. - Manual blade tensioning control with display via electronic converter. - Base frame designed for complete coolant recovery, even during maximum angle cuts. - Coolant tray (equipped with electric pump for blade lubrication and cooling) and swarf drawer (can be replaced with a chip conveyor – see special accessories) integrated into the base frame. - Ready for optional minimal blade lubrication kit (in addition to standard coolant system with emulsifying oil). - Swarf removing brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cuts of the same length. - Material support arm with roller for securing the loading table. - Bimetal saw blade suitable for solid and profile materials. - Tool kit and operating manual in the respective user language.

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. Kodpfx Aefg E Hzsgfjdt + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Kdodpfofg E H Rex Agfst Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Key features: - Swiveling control panel mounted on a vertical post Kodjfg E Iaopfx Agfjdt - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Stanje: novo, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs by the weight of the saw arm itself, is balanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the required position for material feeding. Electrical control panel (labeled wiring connections, indicator light for operational readiness, main safety switch with provision for padlock, selector or speed change switch, emergency stop, thermal-magnetic protection, 24-volt low voltage system). Electronic tension converter for the saw band with on-screen display. Manual vice with quick-release lock. Kdedpfx Agefg E H Tsfet Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (accessory). Electric coolant pump for cooling and lubricating the saw band. Chip removal brush. Adjustable precision stops for making identical length cuts. Machine is designed for pallet truck transport. Bimetal saw band for solid and profile material. Tool kit and operating instructions included.

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine Kodpfefm T Hbex Agfedt • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.

Stanje: novo, Cutting diameter: 280 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Control: NC Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Attention: Special offer price! • Hydraulic fully automatic bandsaw Kdodpfxjfg E H Do Agfst • Mitre cuts up to 60° to the left possible • Saw blade length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touch screen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required footprint: 3.4 m² • Installation dimensions: 1900 mm wide x 1800 mm deep

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Kodpfsxaatbex Agfjdt Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for monitoring all functions * Swivel-mounted, front right - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw bow lowering speed - Saw band guide with carbide plates - Hydraulic saw band tensioning including digital value display - 2 saw band speeds - 1 Bi-metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Premer reza: 300 mm Obseg reza pri 90 stopinjah: ploščati material 330 x 260 mm Obseg reza pri 90 stopinjah: kvadratni material 260 x 260 mm Obseg reza pri 45 stopinjah: ploščati material 270 x 200 mm Obseg reza pri 45 stopinjah: okrogli material 260 mm Obseg reza pri 45 stopinjah: kvadratni material 250 x 250 mm Obseg reza pri 60 stopinjah: ploščati material 170 x 170 mm Obseg reza pri 60 stopinjah: kvadratni material 170 x 170 mm Obseg reza pri 60 stopinjah: okrogli material 180 mm Območje vrtljajev: 40 / 80 m/min Dimenzije traku žage: 3650 x 27 x 0,9 mm Krmiljenje: MEP Moč motorja: 1,5 / 1,8 kW Teža: 670 kg Oprema: - robusten elektro-hidravlični polavtomatski stroj za rezanje s tračno žago (INDUSTRIJSKA IZVEDBA) - z možnostjo poševnega reza od 45° v desno do 60° v levo * nastavitev kota s pomočjo velikega vrtljivega krožnika - MEP mikroprocesorsko krmiljenje EVO za nadzor vseh funkcij * spredaj desno, vrtljiv - možnost ročnega ali avtomatskega spuščanja žaginega ročaja * brezstopenjska nastavitev spuščanja žaginega ročaja - vodilo traku žage iz karbidnih plošč - hidravlična napenjalna naprava za trak žage - vključno z digitalnim prikazovalnikom vrednosti - 2x hitrosti traku žage - 1x bimetalni trak žage - hladilni sistem - 1x omejevalo kota - krtača za čiščenje ostankov Kjdpfexaav Ajx Agfodt - podstojna konstrukcija stroja z žepi za viličar - navodila za uporabo v nemščini Način delovanja polavtomatskega obratovanja: - elektro-hidravlično vpenjanje primeža - elektro-hidravlično spuščanje žaginega ročaja - elektro-hidravlično dvigovanje žaginega ročaja - elektro-hidravlično odpiranje primeža

Stanje: novo, Model designation: PH 261-1 HB Kdodpfol H Dydox Agfet

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90° (flat): 280 x 200 mm Cutting range at 90° (square): 230 x 230 mm Cutting range at 45° (round): 190 mm Cutting range at 45° (flat): 180 x 180 mm Cutting range at 45° (square): 180 x 180 mm Cutting range at 60° (flat): 110 x 110 mm Cutting range at 60° (square): 110 x 110 mm Cutting range at 60° (round): 120 mm Vice opening: 285 mm Blade speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 370 kg Space requirement: approx. 1620 x 1360 mm Equipment/features: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic lowering of the saw bow Kjdpfxexaa H Ij Agfodt * With infinitely adjustable feed * End stop at end of cut - Manual cutting function selectable - 2x band saw speeds - Carbide blade guides - 1x saw blade - 1x angle stop - Integrated chip cleaning brush - Operator panel - front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing unit

Stanje: novo, Model designation: Shark 282 CCS Kjdpjgvkbcefx Agfodt

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 105 mm Cutting range at 90° (flat): 180 x 70 mm Cutting range at 45° (round): 120/110 mm Cutting range at 45° (square): 10/95 mm Cutting range at 45° (flat): 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, circular saw automatic machine with semi-automatic function, for sawing aluminium and light metal alloys, designed for use with carbide-tipped circular saw blades. Machine suitable for mitre cuts from 45° right to 45° left. The vertical axis alignment allows for sawing operations with the head inclined from 0° up to 45° to the left. Kdjdpfjfg Rlgsx Agfot Numerically controlled circular sawing machine equipped with a new Windows CE-based control system, specially developed by MEP for automatic machines.

Stanje: novo, Cutting diameter: 230 mm Cutting range at 90 degrees, flat: 230 x 230 mm Cutting range at 90 degrees, square: 230 x 230 mm Vice opening: 235 mm Cutting speed range: 15 - 100 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP CNC Total power requirement: 3.18 kW Machine weight: approx. 1,175 kg Space requirement: approx. 1980 x 1105 mm * Automatic double-column bandsaw with a footprint of only 2.5 square meters * * Maximum performance in the smallest space * Kdjdpoxabq Usfx Agfjt Equipment: - Powerful CNC automatic bandsaw in double-column design * for 0° cuts - Windows CE-based touch screen control * Swiveling control panel, 5.0 - 180° * Up to 100 cutting programs with different quantities and lengths * Minimizes programming time for recurring jobs - 2 operating modes (semi-automatic and automatic) * Enables efficient cutting under all conditions - Saw head feed via hydraulic cylinders . Driven linear guides with preloaded ball bearings * Reduces mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head * Reduces processing time - Feed system with 600 mm stroke, repeatable, allows cutting of all lengths - Vertical roller pairs for any type of bar or bundle material - Infinitely variable blade speed from 15 to 100 m/min - Robust cast iron (G25) structure to compensate for vibrations - Safety enclosure complying with the latest safety regulations . according to Machinery Directive EN 13898/2007

Stanje: novo, Premer reza: 300 mm Območje reza pri 90 stopinjah: ploska plošča 380 x 250 mm Območje reza pri 90 stopinjah: kvadratna plošča 250 x 250 mm Območje reza pri 45 stopinjah: ploska plošča 300 x 200 mm Območje reza pri 45 stopinjah: okrogla plošča 260 mm Območje reza pri 45 stopinjah: kvadratna plošča 250 x 250 mm Območje reza pri 60 stopinjah: ploska plošča 200 x 170 mm Območje reza pri 60 stopinjah: kvadratna plošča 170 x 170 mm Območje reza pri 60 stopinjah: okrogla plošča 180 mm Območje hitrosti: 40 / 80 m/min Kdedsxaax Depfx Agfst Dimenzije traku žage: 3770 x 27 x 0,9 mm Moč motorja: 1,5 / 1,8 kW Teža: 695 kg Potreben prostor: približno 1950 x 1300 x 200 mm Oprema: - robusten elektro-hidravlični polavtomatski stroj za žaganje s trakom (INDUSTRIJSKI) - z možnostjo poševnih rezov od 45° v desno do 60° v levo * nastavitev poševnega kota prek velikega vrtljivega krožnika - krmilnik MEP z mikroprocesorjem EVO za nadzor vseh funkcij * spredaj desno, vrtljiv - ročno ali avtomatsko spuščanje žage (izbira) * brezstopenjska nastavitev spuščanja žage - vodilo za trak žage iz trdih kovinskih plošč - hidravlična napetost traku žage – vključno z digitalnim prikazom vrednosti - 2 hitrosti traku žage - 1 trak žage iz BI-kovine - sistem za hlajenje - 1 podaljšek za natančno rezanje pod kotom - krtača za čiščenje žagovine - podstavek stroja z žepi za viličar - navodila za uporabo v nemščini Način delovanja polavtomatskega stroja: - elektro-hidravlično vpenjanje primeža - elektro-hidravlično spuščanje žage - elektro-hidravlično dvigovanje žage - elektro-hidravlično odpiranje primeža

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight: approx. 0.615 t Space requirement: approx. 1.4 x 1.4 x 2.0 m Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: • Saw head runs on recirculating ball linear double guides • Three-stage gearbox • Infinitely variable blade speeds 15–150 rpm • Vice jaw opening: 190 mm • Saw head stroke programmable directly via control panel, for adaptation to the cutting material • Pneumatic vertical vice • Saw blade HSS DMO 5 Ø 370x32x3 for solid and profile material • Vice with counterhold device for double workpiece clamping • Machine base with removable coolant tray Kdedjfg Rldspfx Agfst • Chip removal brush • Length stop for identical length cuts • Material support arm, with connection option for roller conveyor/loading side

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Kdjdpsfg E Ibsfx Agfst Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported.

Stanje: skoraj kot novo (rabljeno), Overall length: 1500 mm Width: 500 mm Height adjustable with leveling feet: +/- 900 mm 6 rollers, diameter: 60 mm Kodpfefn Thhex Agfsdt Roller width: 430 mm

Stanje: novo, Model designation Ksdpfx Agegvquwsfodt Shark 332-1 CCS

Stanje: novo, Model designation PH 262 HB Kodpfel H Dyljx Agfodt

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 435 kg Space requirement approx.: 1000 x 2000 mm Kedpfx Agjw U U Uwsfedt Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for monitoring all functions * Front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering - Saw band guides with carbide plates - Hydraulic blade tensioning – including digital display - 2x band saw speeds - 1x Bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90°: round 115 mm Cutting capacity at 45°: round 110 mm Cutting capacity at 60°: round 90.0 mm Cutting capacity at 90°: square 95 x 95 mm Cutting capacity at 45°: square 95 x 95 mm Cutting capacity at 60°: square 90 x 90 mm Cutting capacity at 90°: flat 180 x 95 mm Cutting capacity at 45°: flat 125 x 95 mm Cutting capacity at 60°: flat 90 x 90 mm Speed: 15 / 30 / 45 / 90 rpm Control system: MEP NC Total power requirement: 1.8 / 2.5 kW Weight: 410 kg Dimensions (L x W x H): 2050 x 1050 x 1120 mm Equipment / Description: - NC electro-pneumatic semi-automatic (INDUSTRIAL) * suitable for cuts from 45° right to 60° left - MEP NC control with soft-touch keyboard * backlit display - Saw head guided on preloaded linear guides on a robust cast steel column - Powerful 2-speed gearbox designed specifically for solid material cutting - Four blade rotation speeds available for optimal adaptation to the material - Large, ball-bearing rotary table with internal table clamping & precision stops at 0/45/60° for fast adjustment for miter cuts - Pneumatic vice equipped with bolted jaws, providing optimum workpiece clamping thanks to the ribbed surface - Base frame with lockable door, chip drawer, and removable coolant tray with electric coolant pump - Chip removal brush Kedjxabd Ispfx Agfedt - Adjustable length stop 600 mm - Comprehensive operating instructions, maintenance manual - Wiring diagrams and exploded drawings - Lifting eyes for transport * Machine is supplied without saw blade

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90°: flat 510 x 320 mm Cutting capacity at 90°: square 320 x 320 mm Cutting capacity at 45°: flat 350 x 320 mm Cutting capacity at 45°: round 320 mm Cutting capacity at 45°: square 300 x 300 mm Cutting capacity at 60°: flat 230 x 310 mm Cutting capacity at 60°: square 200 x 200 mm Cutting capacity at 60°: round 200 mm Speed range: 15 - 100 m/min Saw band dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) Kjdpfxjxaa Tzj Agfjdt - Suitable for mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Rotatable, located at front right - Optional manual or automatic lowering of the saw bow * Infinitely variable saw bow descent adjustment - Carbide blade guides - Hydraulic blade tensioning – including digital value display - 2x blade speeds - 1x Bi-metal saw band - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functions: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100x100 / 95x95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Speed: 1,700 / 3,400 rpm Control system: MEP CNC Total power requirement: 2.6 / 3.5 kW Machine weight: approx. 605 kg Dimensions (L x W x H): 2210 x 1680 x 2150 mm Features: - Fully automatic CNC high-performance circular saw * for mitre cuts from 45° right to 45° left * for cutting aluminium and light metal alloys - MEP microprocessor control * Windows "CE" based control system * user-friendly interface * up to 100 cutting programs storable * user interface with 7” touch screen display & mechanical buttons * adjustable/swing-mounted operation panel * display and logging of alarms and error messages * positioning of saw head and movement of feeder via joystick * automatic detection of cutting start position - Material feed with stepper motor and ball screw * with 600 mm stroke Ksdpfx Agexaa Uxefedt * can be repeated for any length cuts - Manual safety hood - Mechanical stops at -45°, 0°, +45° * allow for quick saw head positioning - Pneumatic vice system * 2x pneumatic frontal vices * including vertical vice - Heavy cast iron construction ensures vibration-free operation & maximum precision - Saw head can be tilted up to 45° - 2 saw blade speeds - Base frame with lockable door - Coolant system (emulsion oil lubrication) - Machine base with forklift pockets - Comprehensive operating and maintenance manuals

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 115 mm Cutting capacity at 90 degrees: square 95 x 95 mm Cutting capacity at 90 degrees: flat 180 x 95 mm Cutting capacity at 45 degrees: round 110 mm Cutting capacity at 45 degrees: square 95 x 95 mm Cutting capacity at 45 degrees: flat 125 x 95 mm Cutting capacity at 60 degrees: round 90.0 mm Cutting capacity at 60 degrees: square 90 x 90 mm Cutting capacity at 60 degrees: flat 90 x 90 mm Speed: 15 / 30 / 45 / 90 rpm Total power requirement: 1.8 / 2.5 kW Machine weight: approx. 375 kg Dimensions L-W-H: 1000 x 1100 x 1870 mm Kdodpfxsxaab Sj Agfst Features / Description: - Manual high-performance vertical circular saw - For cuts from 45° right to 60° left - The saw head runs on preloaded linear guides mounted to a robust cast steel column - Heavy-duty two-stage gearbox specifically designed for solid material cutting - Four available blade speeds for optimal adaptation to the material - Large, mounted rotary table with internal table clamping and precision end stops at 0/45/60° for rapid adjustment of miter cuts - Quick-release vise equipped with bolted jaws - Serrated jaws for optimal workpiece grip - Base frame with lockable door, chip drawer, and removable coolant tray with electric coolant pump - Chip removal brush - Adjustable length stop 600 mm - Comprehensive operating instructions and maintenance manual - Circuit diagrams and exploded views - Crane lugs for transport * Machine is supplied without saw blade