Aluminij Krožna žaga

MEP Cobra 352 NC EVO 5.0

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), 1 used short bar feeder Hfsdjht Rl Ejpfx Ah Tsn Manufacturer: Breuning Model: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5–80 mm diameter Bar length: 100–1200 mm

Stanje: rabljeno, Leto izdelave: 1994, Tehnični podatki: Premer žaginega lista: 450 mm Število vrtljajev: 2820 min⁻¹ Največja dolžina reza: 5000 mm Najmanjša dolžina reza: 240 mm Potreben zračni tlak: 6-8 bar Premer izvrtine žaginega lista: 32 mm Kot reza v obe smeri: 45+90° Priključek za stisnjen zrak: 6–8 bar Skupna priključna moč: pribl. 4,6 kW Teža stroja pribl.: 1,1 t Dimenzije stroja (D x Š x V): pribl. 6,05 x 1,49 x 1,79 m Dodatne značilnosti stroja: Hfsdpfxeu Nigks Ah Tjn - Vpenjalna naprava: pnevmatska, vertikalna in horizontalna - Pnevmatska naprava za meglenje - Višinsko nastavljive noge stroja - Materialne podpore pomične skupaj z žago - Dvoročno upravljanje - Števec kosov Premer reza v skladu s tabelo reznim diagramom, saj je odvisen od hitrosti in žaginega lista. Hitrost rezanja pri 2820 obr./min in premeru lista Ø = 66 m/sec. Oprema: - 2 rezervna žagina lista

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Hfodsuiy Hrspfx Ah Tsn Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Max. profile length with 3-sided machining: 7,600 mm, Y-axis travel: 845 mm, Z-axis travel: 620 mm, max. traversing speed X-axis: 63 m/min, max. traversing speed Y-axis: 60 m/min, max. traversing speed Z-axis: 60 m/min, A-axis swivel range: -90°, 0°, +90°, max. spindle speed: 24,000 rpm, spindle power: 11 kW S1, machining directions: top/front/rear/left/right, positioning accuracy: 0.1 mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120 mm, saw blade diameter: 180 mm, software: eluCam, connected load: 30 kVA, compressed air connection: 7 bar, compressed air consumption: approx. 180 l/min, length: 10,775 mm, width: 3,430 mm, height: 2,950 mm, weight: 4.9 t, operating hours: 1,550 h, standby: 6,300 h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2-layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for job/machining data input and documentation. Regularly maintained, on-site inspection possible. Hsdpfx Ahozbb Rrj Tofn

Stanje: novo, Leto izdelave: 2023, BERG+SCHMID krožna žaga iz aluminija, model VELOX 350, ročna, regulirana hitrost: 1800+3.600 vrt/min • Naklon desno in levo 45° Hfjdpfjr Ilktsx Ah Tjn • Naklon glave do 45° (nastavljiv) • Vrteča miza s krogličnimi ležaji • Osnova stroja • Najvišja kakovost reza zaradi dušenja vibracij • Zelo miren potek reza • Enostaven zagon in visoka zmogljivost • Podstavek stroja s predalom za žagovino Dimenzije žaginega lista: 350x32 mm Dodatna oprema, kot so žagini listi, valjčni transporterji, merilni vodila, minimalno mazanje itd., je na voljo na zahtevo! Dobavni rok: iz skladišča Waiblingen Beinstein.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication Hjdpfouiy Ngjx Ah Tofn - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Stanje: rabljeno, Leto izdelave: 1998, Hänel Tip: Rotomat 950 Št. naprave: 120.657*1 Leto izdelave: 1998 Višina naprave: pribl. 3800 mm Širina naprave: pribl. 3140 mm Globina naprave: pribl. 1250 mm + 330 mm namizna plošča Število polic: 18 Širina police: pribl. 2880 mm Globina police: pribl. 400 mm Višina police: pribl. 310 mm Nosilnost police: 300 kg Skupna nosilnost: 5400 kg Hfjdjy D S Hwspfx Ah Ton Barva: sprednja stran bež / vogali sivi

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 30.000 mm, skupna višina: 4.300 mm, skupna širina: 6.500 mm, teža obdelovanca (maks.): 100 kg, temperatura: 220 °C, ogrevalna zmogljivost: 80 kW (108,77 KM), višina obdelovanca (maks.): 1.200 mm, dolžina obdelovanca (maks.): 2.500 mm, izolacijski material: Mineralwolle 75 kg/m³, debelina izolacije: 150 mm, širina obdelovanca (maks.): 800 mm, Oprema: osvetlitev, Popolnoma avtomatska linija za nanašanje praškovih premazov (tekoči transport, predobdelava, nanašanje s sistemom Wagner, peči) Prodaja se profesionalna, popolnoma avtomatska linija za nanašanje praškovih premazov, zasnovana kot tekoča linija (ciklični sistem) podjetja Klaus Benecke. Linija je idealna za učinkovito nanašanje premazov na aluminijaste komponente in druge kovinske izdelke. Individualna prilagoditev linije je možna po dogovoru! Glavne značilnosti in ključne komponente: Hedoum Uflopfx Ah Tefn - Kemijska predobdelava: 2-stopenjska brizgalna komora (D=3.600 mm, Š=1.500 mm, V=2.250 mm), vključno z razmaščevanjem/fosfatiranjem in izpiralnim območjem s brizgalno rameno. - Sušilnik za predhodni premaz: tekoča peč do 120 °C s 40 kW gorilnikom za utekočinjeni naftni plin (Riello). (možna druga vrsta oskrbe z energijo) - Kabina za nanašanje praškovih premazov PVC 3.600: antistatična plastična kabina z monociklonom (sesalna moč 12.000 m³/h) in dodatnim filtrom. - Wagner Premium sistem za nanašanje: 2 dvižna mehanizma, 6 avtomatskih pištol PEA-C4, 2 ročni pištoli in krmilnik, zasnovan za do 10 pištol. - Peč za strjevanje: tekoča peč do 220 °C s 80 kW gorilnikom za utekočinjeni naftni plin (Riello). (možna druga vrsta oskrbe z energijo) - Transportni sistem: Cardin verižni transporter C-100 v cikličnem načinu (50 m transportne poti, 54 m verige). - Krmilnik: sodoben PLC krmilnik z 7-palčnim barvnim zaslonom (Easy View), pretvornikom in modemom za oddaljeno vzdrževanje. Tehnični podatki: - Vrsta linije: linija za nanašanje praškovih premazov (tekoči / ciklični sistem) - Največje dimenzije obdelovancev: (D x Š x V) 2.500 x 800 x 1.200 [mm] - Največja obremenitev na nosilec: 100 kg/prečka - Ocena proizvodne zmogljivosti: pribl. 50 m²/h (oba strani) - Material: aluminij / kovinski deli - Transportni trak: veriga Cardin C-100 (50 m) - Moč gorilnika: sušilnik / peč 40 kW / 80 kW (utekočinjeni naftni plin ali drug vir energije na zahtevo) - Krmilnik: PLC s 7-palčnim zaslonom na dotik - Stanje: nova linija / projekt Komponente v obsegu dobave: - Kemijska predobdelava (2-stopenjska brizgalna komora) - Sušilnik za predhodni premaz - Sistem za nanašanje praškovih premazov (PCB 3.600) - Wagner sistem za nanašanje - Peč za strjevanje praškovih premazov - Transportni sistem - Električni krmilnik - Storitve in dodatna oprema

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 80 t Hfedpfxetycdke Ah Ten Outreach: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table surface: 830 x 610 mm Ram surface: 650 x 400 mm Gap depth (to rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - with gear-driven wheels - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - central grease lubrication - cover plate for drop-through hole - stepless speed control via frequency converter - The machine will be mechanically inspected and overhauled in our facility, and will receive a new control cabinet with safety control and touchscreen - Current UVV inspection with braking time measurement

Stanje: rabljeno, Leto izdelave: 1980, Premer žaginega lista: 380 mm Pnevmatska pritrditev: da Št. stroja: 46893 Teža stroja: ca. 1,3 t +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega ni mogoče prikazati stroja pod električnim tokom niti izdelava videoposnetka. Naš oglas vsebuje najpomembnejše fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. Hfodsd N Sm Djpfx Ah Ton +++++