Mdf nakup rabljenega (191)

Stanje: novo, Universal application (wood, pallets including nails, wood fiberboard and offcuts, veneers, MDF boards, plastic, ...) Itedpjgw Sxzsfx Abxsh Motor power: 18.5 kW Rotor length: 550 mm Rotor diameter: 222 mm Rotor speed: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m³/h (depending on material) Extraction connection: 160 mm Material: plastic, cardboard, wood (chipboard, MDF boards, waste, ...) Feed hopper opening: 946 x 567 mm Dimensions (L/W/H): 1880/1120/1670 mm Weight: approx. 1250 kg 2-year warranty or 2,000 operating hours Used machine notice: • Subject to errors in technical details and prior sale. • Stated prices are ex works - loading included! • The machine has been cleaned and function-tested. • All machines are sold as inspected, with no claims or warranties. Buyers are free to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries with full address and phone number!)

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Features and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Constructed from 18 mm Koskisen panels, comprising a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed made of 19 mm MDF as a sacrificial plate with guide rails and T-slot nuts for clamping. Base frame with struts, filled with polymer concrete, prepared for transport by pallet jack or forklift. Mechanical set consisting of profile guides including carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast controller for three axes, with Ethernet connection. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm, with motor cables, as well as a 48V, 6.7A switching power supply, LED board for breakout board, ribbon cables and proximity sensors, as well as accessories such as wire leads, ferrules, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum housing, including electrical kit and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, and mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining length and updating the active zero offset. Special features: High-frequency spindle with 2.2 kW, including lock nut, frequency inverter, line filter, braking resistor, and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solids Availability: short-term Location: Flörsheim Itodpfx Abow Nadysxjh

Stanje: dober (rabljeno), Koda: 0040 Znamka: BREVETTI MOTTA - ITALIJA Iedov Am Ibepfx Abxsth Model: VELOX - CE standard Pnevmatski stroj za spajanje lesenih in MDF okvirjev, namenjen izdelavi pohištva, vrat, oken in drugih različnih elementov - skladno s CE standardom. Tehnični podatki: Enota za spajanje: št. Delo s profilom: maks. širina 120 mm - maks. višina 70 mm - min. širina 5 mm - min. višina 5 mm Možna urna proizvodnja: 150/200 dokončanih okvirjev Delovni tlak: 6 bar (stisnjen zrak) Skupne dimenzije: 500 x 680 x 1250 mm (višina) Teža: 75 kg

Stanje: rabljeno, Leto izdelave: 2016, TECHNICAL DATA AXES Max. Workpiece Dimensions X-Y-Z mm: 3050 x 800 x 50 Min. Workpiece Dimensions X-Y-Z mm: 300 x 90 x 10 Working Area Drilling/Grooving mm: 0 x 800 / 0 x 800 X-Axis Stroke mm: 750 Max. Traverse Speed X-Y Axes m/min: 25 DRILLING UNIT Vertical Spindles: - Number: 7 (4X-4Y, one shared) Itsdpfovvi I Rox Abxsh Horizontal Spindles (along Y-axis): - Number: 2 (1+1) Horizontal Spindle (along X-axis): - Number: 1 Fixed Grooving Saw (Direction): X Saw Blade Diameter mm: 100 Max. Saw Blade Thickness mm: 5 Motor Power kW (HP): 1.5 (2) Spindle Speed rpm: 3350 Saw Blade Speed rpm: 4300 INSTALLATION Power Supply V (Hz): 380 / 400 (50/60) Installed Power kVA: 4.5 Compressed Air Requirement bar: 6 Compressed Air Consumption Nl/cycle: 90 Extraction Requirement m³/h: 1200 Extraction Air Speed m/sec: 20 Extraction Port Diameter mm: 80+80 F10L Drilling Unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles: 32 mm - 2 horizontal drilling heads: 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill holder D10 mm) - Speed: 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed: 4300 rpm - Motor power: 1.5 kW - Vertical pneumatic stroke per spindle: 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece Positioning and Drive of the Working Unit A CNC-controlled vacuum suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along the X and Y axes is via THK rails with transmission on reinforced toothed belts. Movement in the Z axis is pneumatic on ball bushing guides, with stops adjustable via the end position. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system is specifically designed for use in drilling and milling machines. - CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and any faults or errors displayed in the operator's language Programming - Programmed via CN - Automatic optimization of drilling operations - Option for plate zero-point shift - Option to save and import drilling programs via USB dongle - Option to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the operating manual - Graphic display of aggregate configuration Vacuum Suction Cup "B-Power" vacuum suction cup with dual vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine Operating Interface Software: Xilog Maestro USB Hardware and Software Requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min.; multicore processor recommended - Memory: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The package includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphical programming - Supported programming with graphical and syntax aids for drilling operations - Ability to create and save machining macros Integrated Additional Functions - Self-diagnosis and error reporting in the operator's language - User interface in

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Itjdpfxjvwbp Ae Abxsh

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, V-motion classic vakumska dvižna naprava s vrtljivim nosilcem Nosilnost: 250 kg Višina naprave: 3,8 m Spodnji rob nosilca: pribl. 3 m Doseg: 4 m Vrtilni obseg: 250° Primerna za horizontalni in vertikalni transport materialov. Odlično uporabna za standardne gladke plošče in plošče (MDF od 8 mm debeline). Iodpfsy R D Hiox Abxoth Pnevmatika za nagibanje omogoča lažje delovanje naprave. Območje vrtenja pri nagibanju je do 90°. Vakuum se ustvarja z ejektorjem prek pnevmatike. Podrobnosti: Hitrost dviga: verižni vitel, 0–10 m/min Višina dviga: 2 m Dolžina verige: 3,5 m Delovni tlak: 7 bar (potrebno prečiščeno stisnjen zrak) Potrebna količina zraka: 11 Nl/s.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 610203Z, skupna masa: 295 kg, Vitap ALFA 21 Classic, večvretenasta bušilica – 2016 Vitap ALFA 21 Classic poluautomatska večvretenasta bušilica proizvedena u Italiji. Stroj je namijenjen za precizno bušenje linija u proizvodnji namještaja i kuhinja prema 32 mm sustavu. Pogodna je za vertikalno, horizontalno i kutno bušenje iverice, MDF-a i masivnog drveta. Itodpfx Abjy Uwrysxsh Stroj je u vrlo dobrom stanju, potpuno funkcionalan i spreman za trenutnu upotrebu. Značajke: Proizvođač: Vitap Model: ALFA 21 Classic Godina proizvodnje: 2016 21 vreteno Razmak između vretena: 32 mm Pneumatska glava za bušenje s nagibom (0°–90°) Vertikalno i horizontalno bušenje Upravljanje nožnom pedalom Pneumatski prihvati materijala Brzomijenjajuće stezne glave Precizni graničnici i oslonci Robusna industrijska konstrukcija Tehnički podaci: Broj vretena: 21 Udaljenost između prvog i posljednjeg vretena: 640 mm Brzina vretena: 2800 o/min Maksimalna dubina bušenja: 70–80 mm Maksimalni promjer alata: Ø35 mm Dimenzije stola: cca 864 × 500 mm Snaga motora: 1,5 kW Napajanje: 400V / 3 faze / 50 Hz Potrebni tlak zraka: 6–8 bara Težina stroja: cca 295 kg Stroj je moguće pregledati i isprobati pod naponom.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), število osi: 3, skupna dolžina: 2.500 mm, skupna širina: 1.300 mm, skupna masa: 1.260 kg, Oprema: CE označba, dokumentacija / priročnik, Reduce setup times by 4-5 times with pneumatic automatic tool change and a tool length sensor! Convenient operation. This CNC milling machine is suitable for cutting and engraving wood, MDF, chipboard, acrylic, plexiglass, PVC, composites, and aluminum. The Wattsan M3 1325 features an increased frame thickness, allowing it to handle heavy workpieces. It is capable of manufacturing parts for the light industry, interior and exterior decoration, souvenirs, outdoor advertising, processing of soft metals and stone, woodworking, and furniture production. For more information, you can call our managers! Features of the Wattsan M3 1325: - Working area: 1300x2500 mm - Positioning accuracy: 0.03 mm - Spindle: 7.5 kW Itsdporywtqofx Abxjh - Machine dimensions: 1960x3350x1740 mm - Weight: 830 kg Virmer not only offers top-quality machines, but also service and delivery. Our engineers and managers are ready to answer all your questions and provide video support if needed. In addition, owners of Wattsan equipment receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We supply not only laser engravers, but also metal cutters, welding machines, marking systems, and cleaning equipment. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and is continuously developing with the help of its customers. Thanks to customer feedback, Wattsan has implemented more than 50 upgrades, making the machines more reliable, precise, and powerful, so you can take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK If you are looking for the right laser or CNC milling machine, we are happy to assist you. At our company, you will find a large selection of laser machines and equipment: CO2 laser machines; laser cutting machines for metal; metal laser cutters; fiber metal lasers; fiber metal laser engravers; CNC milling machines for metal; milling machines for wood; CNC milling machines; laser engraving machines; laser engravers; laser cutting machines for plywood; laser engravers; laser cutting machines for metal; CNC milling machines; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary devices; mirrors for laser machines.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 4,5 kW (6,12 KM), število osi: 3, skupna masa: 730 kg, dolžina mize: 1.600 mm, širina mize: 1.600 mm, Oprema: CE označba, dokumentacija / priročnik, This is a medium-sized CNC router designed for cutting, engraving, and 3D milling. It is capable of working with plywood, wood, MDF, chipboard, plexiglass, plastics, soft metals, and aluminium. The equipment is designed for efficient operation around the clock, day and night. The Wattsan M1 1616 comes standard with a 4.5 kW spindle. The machine features a worktable measuring 1600x1600x200 mm. Its gantry is reinforced for increased rigidity, enabling the installation of one to twelve spindles. This allows even heavy workpieces to be processed with ease. For further details, you can contact our managers by phone! Features of the Wattsan M1 1616: - Working area: 1600x1600 mm - Spindle: 4.5 kW - Machine dimensions: 2300x2140x1780 mm - Weight: 590 kg Virmer offers not only premium machinery, but also service and delivery. Our engineers and managers are ready to answer all your questions and provide video support if required. Additionally, owners of Wattsan equipment receive lifetime online support. Virmer is based in the Netherlands and operates across Europe. Virmer is the official supplier of Wattsan. We not only supply laser engravers, but also metal cutting machines, welding equipment, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years and continuously develops its machines based on customer feedback. Thanks to this input, Wattsan has implemented over 50 upgrades, making their machines more reliable, precise, and powerful—helping you take your business to the next level. Itjderywhuspfx Abxoh YOU CAN CONTACT US BY EMAIL OR PHONE! WE WILL HELP YOU SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for the ideal laser or CNC milling machine, we are happy to assist you. We offer a wide range of laser machines and accessories, including: CO2 laser machines; metal laser cutting machines; metal laser cutters; fiber metal lasers; fiber laser engraving machines; CNC milling machines for metal; woodworking milling machines; CNC routers; laser engravers; laser engraving machines; plywood laser cutters; laser cutters for metal; CNC routers; laser marking systems; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary attachments; mirrors for laser machines.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 3,2 kW (4,35 KM), število osi: 3, skupna masa: 620 kg, dolžina mize: 1.600 mm, širina mize: 1.600 mm, Oprema: CE označba, dokumentacija / priročnik, This is a medium-sized CNC router designed for cutting, engraving, and 3D milling. It can process plywood, wood, MDF, particle board, plexiglass, plastics, soft metals, and aluminum. The equipment is suitable for efficient operation at any time—day or night. The Wattsan A1 1616 comes standard with a 3 kW spindle. The spindle’s Z-axis travel is 20 centimeters. The machine offers a working area of 1600x1600x200 mm. Its robust cast-iron bed provides the necessary rigidity and excellent vibration resistance. For further details, please contact our sales managers! Key Features of Wattsan A1 1616: - Working area: 1600x1600 mm - Spindle: 3 kW - Machine dimensions: 2260x2130x1550 mm - Weight: 590 kg Virmer not only delivers high-quality machines, but also provides service and delivery. Our engineers and managers are available to answer all your questions and, if needed, can provide remote video support. Additionally, owners of Wattsan equipment benefit from lifetime online support. Itjdpfjryv Hhox Abxoh Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official distributor for Wattsan. We supply not only laser engravers, but also metal cutters, welding machines, marking systems, and cleaning units. Wattsan, a Chinese manufacturer, has been producing laser equipment for nearly 15 years and continually advances its product line through customer feedback. Thanks to over 50 upgrades based on user input, Wattsan machines have become even more reliable, precise, and efficient—empowering you to take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for the right laser or CNC milling machine, we are happy to assist you. We offer an extensive range of laser machines and accessories: - CO₂ laser machines - Metal laser cutting machines - Fiber metal lasers - Fiber laser engraving machines - CNC metal milling machines - Wood milling machines - CNC routers - Laser engraving machines - Laser engravers - Laser plywood cutters - Metal laser cutting machines - CNC routers - Laser markers - Lenses - Chillers and machine cooling systems (S&A chillers) - IPG Laser, MAX Photonics, Raycus - Compressors - Rotary devices - Laser machine mirrors

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 4,5 kW (6,12 KM), število osi: 3, skupna masa: 880 kg, dolžina mize: 2.500 mm, širina mize: 1.300 mm, Oprema: CE označba, dokumentacija / priročnik, With this universal CNC milling machine, you can cut, engrave, or 3D mill any shape. The Wattsan M1 6090 enables you to produce decorations, furniture, advertising materials, and packaging. This machine is compatible with a variety of materials, including wood, MDF, chipboard, acrylic, plexiglass, PVC, composites, and aluminum. The Wattsan M1 6090 worktable measures 600x900x200 mm. A 2.2 kW spindle and a T-slot table are included as standard features. Compared to the A1 6090 model, the processing depth can be increased by 20% in a single pass thanks to the 300 mm gantry height. For more details, feel free to call our team! Wattsan M1 6090 Features: Work area: 600x900 mm Spindle: 2.2 kW Machine dimensions: 1380 x 1500 x 1890 mm Weight: 400 kg Virmer not only offers first-class machines, but also service and delivery. Our engineers and managers are ready to answer all your questions and provide video support if needed. Additionally, Wattsan owners receive lifelong online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We supply not only laser engravers, but also metal cutters, welding equipment, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years, continuously evolving with the help of its customers. Thanks to customer feedback, Wattsan has made over 50 upgrades, making the machines more reliable, precise, and powerful—so you can take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL CHOOSE THE RIGHT MACHINE FOR YOUR REQUIREMENTS If you are looking for the right laser or CNC milling machine, we are happy to assist you. We offer a wide selection of laser machines and accessories: CO2 laser machine; metal laser cutting machine; metal laser cutter; fiber metal laser; fiber metal laser engraving machine; CNC metal milling machine; wood milling machine; CNC milling machine; laser engraving machine; laser engraver; plywood laser cutting machine; laser engraver; metal laser cutting machine; CNC milling machine; laser marker; lenses; coolers; machine cooling systems; S&A chiller; IPG Laser, MAX Photonics, Raycus; compressor; rotary device; laser machine mirrors. Iodpfx Ajrvh Ebjbxeth

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 6 kW (8,16 KM), skupna masa: 1.140 kg, natančnost pozicioniranja: 0,05 mm, dolžina mize: 3.000 mm, širina mize: 2.000 mm, število osi: 3, Oprema: CE označba, dokumentacija / priročnik, Large CNC milling machine for high-volume production. With this machine, you can manufacture doors, cabinets, tables, chairs, gaskets, LED signs, souvenirs, and 3D wood reliefs. An excellent choice for those who don’t want any limits. This machine is designed for cutting and engraving wood, MDF, chipboard, acrylic, plexiglass, PVC, composite materials, and aluminium. The planetary gearbox of the Wattsan M1 2030 ensures high speeds, while the reinforced gantry and machine bed guarantee vibration-free operation. Together, they deliver precision. Contact our managers for further details! Specifications of the Wattsan M1 2030 Working area: 2000x3000 mm Spindle: 6 kW Machine dimensions: 2700x3540x1780 mm Weight: 860 kg Virmer not only offers top-class machines, but also comprehensive service and delivery. Our engineers and managers are ready to answer all your questions and, if required, provide video support. In addition, owners of Wattsan equipment benefit from lifetime online support. Virmer is based in the Netherlands and operates across Europe. Virmer is the official supplier of Wattsan. We provide not only laser engravers but also metal cutting machines, welding machines, markers, and cleaning equipment. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years, continually improving with assistance and feedback from its customers. Thanks to over 50 upgrades, Wattsan machines have become more reliable, precise, and powerful—allowing you to take your business to the next level. Isdpfx Aoih Sdgebxoth YOU CAN WRITE TO US OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK. If you are looking for the right laser or CNC milling machine, we will be pleased to assist you. You will find a wide range of laser machines and accessories with us: CO₂ laser machine; metal laser cutting machine; metal laser cutter; fiber laser for metals; fiber laser engraving machine; CNC milling machine for metal; wood milling machine; CNC milling machine; laser engraving machine; laser engraver; plywood laser cutting machine; metal laser cutting machine; CNC milling machine; laser marker; lenses; chiller; machine cooling system; S&A chiller; IPG Laser, MAX Photonics, Raycus; compressor; rotary device; mirrors for laser machines.

Stanje: rabljeno, Leto izdelave: 2026, Special Price - Exhibition Machine Garbsen Our machine concept WL 6: The WEIMA high-performance shredder, with its flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving enormous volume reduction, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper, which can be loaded via conveyor belt or manually. This hopper can be customized to individual requirements and guarantees continuous and cost-effective material feeding without manual assistance. The hydraulically controlled pusher feeds the wood waste to be shredded into the rotor’s cutting area, with automatic, load-dependent regulation. The internal pusher guides are made from highly wear-resistant plastic (polyamide) and are adjustable. The hydraulic cylinders are mounted with gimbal suspension to prevent lateral forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible knives/cutting crowns are seated in milled knife pockets on special knife holders. This patented system guarantees, for the first time, a reduced cutting gap between counter-knife and rotor, resulting in high throughput, low energy consumption, and optimal discharge of the shredded material. The screen beneath the rotor determines the chip size (10–100 mm). Optionally, a hydraulically opening screen basket is available. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox, mounted on one side of the rotor shaft. Precise cutting at high throughput with profiled V-rotor: The V-rotor, specially developed by WEIMA, is universally applicable and made from solid material. Its aggressive material intake, with up to two knife rows, ensures high throughput with low power requirement. It can be equipped with hardened cutting knives (edge lengths 30 mm and 40 mm), which are multiple reversible when worn, drastically reducing maintenance costs. Intuitive operation via Siemens PLC control with touch display: To ensure optimal coordination of electronics and machine, we design, build, and wire our own control cabinets, exclusively using premium components (e.g., Siemens or Rittal). Intuitively operable touch surfaces ensure fast adjustments. Features such as adjusting the pusher stroke or stop ensure high throughput. Built-in overload protection also prevents machine damage. Technical Features WL 6 - Feed opening: 800 x 1,250 mm - Hopper volume: 0.9 m³ - Rotor length: 800 mm - Rotor diameter: 256 mm - Drive power: 22 kW - Rotor speed: 90 rpm Itedpoy D E Tdefx Abxsh - Max. number of knives: 42 pcs - Knife type and size: concave / 40 x 40 mm, reversible cutting crowns - Screen perforation: 10–60 mm - Paint finish: WEIMA standard RAL 2022 / 7016 - Electrical connection: 400 V +/- 5% / 50 Hz - Weight: approx. 1,600 kg - Including: Control cabinet (Rittal) with electrical control (Moeller/Siemens) and S

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 2,2 kW (2,99 KM), skupna masa: 400 kg, natančnost pozicioniranja: 0,05 mm, dolžina mize: 900 mm, širina mize: 600 mm, število osi: 3, Oprema: CE označba, dokumentacija / priročnik, With this universal CNC milling machine, you can cut, engrave, or mill any shape in 3D. The Wattsan A1 6090 allows you to produce decorations, furniture, advertising materials, and packaging. This machine is compatible with various materials, including wood, MDF, chipboard, acrylic, plexiglass, PVC, composites, and aluminum. The Wattsan A1 6090 has a worktable size of 600x900x200 mm. Standard features include a T-slot table and a 2.2 kW spindle. Two-phase stepper motors ensure precise movements. For further details, feel free to call our sales team! Features of the Wattsan A1 6090 - Working area: 600 x 900 mm - Spindle: 2.2 kW - Machine dimensions: 1260 x 1500 x 1662 mm - Weight: 340 kg Virmer provides not only high-quality machines, but also service and delivery. Our engineers and sales representatives are ready to answer all your questions and, if needed, provide video support. Additionally, owners of Wattsan equipment receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. We are the official supplier of Wattsan. In addition to laser engravers, we also supply metal cutters, welding machines, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer with nearly 15 years of experience in laser equipment production, continuously evolving with the help of its customers. Thanks to customer feedback, Wattsan has implemented over 50 upgrades, making the machines more reliable, precise, and efficient — taking your business to the next level. CONTACT US BY PHONE OR EMAIL! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK If you are looking for the right laser or CNC milling machine, we are happy to assist. You will find a wide selection of laser machines and accessories with us: CO2 laser machines; metal laser cutting machines; metal laser cutters; fiber metal lasers; fiber metal laser engraving machines; CNC milling machines for metal; milling machines for wood; CNC routers; laser engraving machines; laser engravers; plywood laser cutters; laser engravers; metal laser cutters; CNC milling machines; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary attachments; mirrors for laser machines. Itodpfsih Sb Nox Abxsh

Stanje: rabljeno, Leto izdelave: 2023, New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving: Detailed technical data available in the data sheet for ProTec type 0571. Processing unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y4th drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1,000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in throughfeed mode, max. 5,600 mm programmable in the software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, 5.5 kW (S1) motor, 1000-20,000 rpm with frequency converter, clockwise and counterclockwise, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm. Iodpfx Aow Tfzfobxeth Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit. Connected load: 12 kVA Rated current: 17.5 A Fuse: 32 A Voltage: 400 V, 50 Hz, 3-phase (without transformer) Power network: TN or TT Pneumatic connection: 7 bar (102 psi) On machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory side For the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side Supply pipe, hose inner diameter min. 12 mm Compressed air requirement, continuous air consumption: approx. 230 L/min (about 3.8 L/s) (compressed air) Extraction connection: 3x extraction nozzles, dia. 80 mm Extraction speed: 30 m/sec - measured at extraction nozzle Extraction requirement: min. approx. 2,500 m3/h Machine weight: approx. 1,650 kg (with options!) Machine footprint: In general, a ProTec can be fixed to the floor. Concrete flooring (or foundation) is required (at least under the 4 machine corners/feet). Equipment: - Protec 571 Profit HSK63F with 3-position magazine - Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm - Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamella curtain - Requirement for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec shank ø 10 mm with clamping surface (JSO): 1 HW pyramid point drill bit 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill bit 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill bit 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill bit 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill bit 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW dowel drill bit 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW grooving cutter ø 125/30 mm, groove width (SB) 4.0 mm, Z=12, LH, Leitz - Only for chipboard and MDF, solid wood on request and subject to agreement Tool holder HSK63 F 3.00 pcs for collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm, 3.00 pcs Carbide insert shank cutter Z1+1, 1.00 pcs HW with insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW-insert Z1, 1.00 pcs with insert drill tip, D ø 10 mm, d ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately) Decorative grooving cutter HW-insert Z1, 1.00 pcs

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Prodam vertikalni CNC obdelovalni center Weeke Optimat BHX 500, letnik 2007, namenjen za vrtanje, rezkanje in izdelavo utorov v ploščinske materiale v pohištveni industriji. Stroj omogoča hitro in natančno obdelavo elementov ter je primeren za serijsko ali individualno proizvodnjo pohištva. Tehnični podatki: • Model: Weeke Optimat BHX 500 • Letnik: 2007 • Tip stroja: 3 osni pretočni CNC obdelovalni center • CNC krmiljenje: WoodWOP (Homag / Weeke) • Maksimalna dolžina obdelovanca: cca 3050 mm • Maksimalna širina obdelovanca: cca 1200 mm • Maksimalna debelina obdelovanca: 80 mm • Minimalna dolžina obdelovanca: cca 200 mm • Minimalna širina obdelovanca: cca 70 mm Oprema: • vrtalna glava z več vertikalnimi in horizontalnimi vreteni • 96 vrtalnih vreten (48 zgoraj, 48 spodaj) • 36 vertikalnih orodij • 12 horizontalnih orodij • žaga za utore • rezkar zgoraj, spodaj • žaga (125mm) vrtljiva za 90° • samodejni kleščni transport obdelovanca Uporaba: Itedpfx Abeywgb Noxjh • vrtanje za moznike, okovje • rezkanje in utori • obdelava iverala, MDF, HDF, vezanih plošč in masive Prednosti: • možnost obdelave dveh kosov hkrati, kar bistveno poveča produktivnost • hitra priprava in menjava obdelovancev • visoka natančnost vrtanja in rezkanja • idealen za proizvodnjo korpusnega pohištva, kuhinj, omar in notranje opreme Stanje: • stroj je redno vzdrževan in delujoč • možen preizkus ob ogledu Dobava: Junij 2026

Leto izdelave: 2025, stanje: novo, Vacuum Lifter BARBARIC, Swivelling, incl. Column Slewing Crane Equipment package consisting of: - Vacuum lifter uniWood B3-90 Degree - 250 Comfort version with integrated chain hoist, reinforced, load capacity: 250 kg Suitable for the vertical and horizontal transport of flat, standard commercial panels. Vacuum generation is achieved pneumatically via ejector. A reinforced vacuum pump is installed for lifting permeable materials (MDF over 8 mm thick). -- Technical Data -- Lifting speed chain hoist: 0–10 m/min infinitely variable via frequency converter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Dead weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum gauge. Load release via 2-button operation - BARBARIC Column Slewing Crane Load capacity 250 kg at the hoist Consisting of: column, bracket, and low-friction jib. Supplied with trolley and energy supply system. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Jib outreach: 5 m Slewing range: approx. 250° Manual slewing and trolley travel Base plate 700 x 700 mm with mounting materials. Itedpfx Aboc Umftoxjh Supplied with chemical anchors for concrete floor. A prerequisite for this mounting is a suitably reinforced concrete floor. The static inspection of the floor is to be carried out and documented by the customer. Other versions and lengths available on request.

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Itjdpfou I R Utex Abxeh Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, CNC Wood Router Axolox 3021 – Demonstration Machine, Immediately Available – Made from 19mm Forescolour, consisting of a milling table (X-axis), gantry (Y-axis), Z-axis assembly in compact laminate, and subframe with adjustable machine feet. The milling bed serves as a sacrificial plate in 19mm MDF. Table openings are pre-configured for longitudinal and transverse setup. Mechanical set comprises profile rail guides including carriage units, ball screw, and precision rack and pinion. All components are assembled, pre-lubricated (test run included), and immediately ready for operation. Control kit includes control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply, and toroidal transformer, pre-installed in the control cabinet, plus sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals offer dust protection, and all protective measures comply with CE by means of a mobile extraction device and a side-mounted laser scanner for workspace monitoring, covering a 275° and 5.5m field of view (machine positioned in room corner). Handheld control unit equipped with all necessary functions, including emergency stop and dead man's switch. Tool length sensor determines tool length and updates the active zero offset. High-frequency spindle, 2.2 kW, includes collet nut, frequency inverter, line filter, brake resistor, and collet set. Built-in monitor, including mini PC with Windows 10, control software Beamicon2, mouse, and keyboard, pre-installed in an ergonomic console. CAD license Rhino 7.0 and CAM license Estlcam V11, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable segments. Cross-table made of PE with top plate MDF. Becker vacuum pump, 160 m³/h, oil-lubricated. For electrical connection, a 16A, 400V AC plug is required. Customer to provide 3mm HDF, unfinished on both sides, for the full vacuum table area (3000x2100mm), to be used as a sacrificial plate. (Recommended application: processing of laminated chipboard materials.) - Tool set: 10 pieces 2 pcs 5mm TAC double-flute cutters. 8 pcs 4mm solid carbide single-flute cutters. - Maintenance kit: Includes 150ml grease gun, one cartridge of high-performance grease (400g), 500ml silicone spray grease, one grease nipple. - Hold-down device Attachment for existing high-frequency spindle. Suitable for slightly curved and especially thin materials. Iodpfxowdny Ts Abxsth Location: ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our Machine Concept WL 6 The high-performance Weima shredders, with their versatile applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction particularly with bulky materials. Operating Principle: The machine is equipped with a large feed hopper and can be loaded either by conveyor belt or manually. This hopper can be customized to individual requirements and guarantees continuous and economical material infeed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Iodpfsh Eiw Isx Abxoth Rotor working width: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting inserts Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connection: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration mounts - V-rotor (patented) with milled knife holders in profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second row of knives Available from stock in 54634 Bitburg - Immediately available - Request more information

Stanje: novo, Leto izdelave: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our Machine Concept WL 6 Weima high-performance shredders, with their flexible range of applications, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction of bulky materials in the process. Operating Principle: The machine is equipped with a large feed hopper and can be loaded either via a conveyor belt or manually. This hopper can be tailored to individual requirements and guarantees continuous and cost-effective material infeed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Itsdpfx Abjh Hnp Doxsh Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Rotor working width: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Includes: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber anti-vibration mounts - V-rotor (patented) with profile-milled knife pockets - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second row of knives Available ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Single-shaft shredder HOKUTech special edition H600 Compact, Robust, High Throughput The H600 high-performance shredder, offering versatile application options, is capable of processing all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction with bulky materials. The hydraulically controlled pusher feeds the wood waste into the cutting area of the rotor and is automatically regulated based on load. The high-performance E-rotor, made from solid steel, has a diameter of 252 mm and operates at a rotor speed of 85–95 rpm. The concave-ground, aggressive, quadruple-rotatable knives/cutting crowns are mounted in milled knife pockets on special knife carriers. This highly efficient system ensures high throughput, low energy consumption, and optimal discharge of the shredded material by minimizing the cutting gap between the counter-knife and the rotor. Chip size (10–60 mm). Itedpfx Aoutmw Hsbxoh Technical data: • Hopper opening: 600 x 800 mm • Hopper volume: 0.6 m³ • Working width of rotor: 600 mm • Rotor diameter: 252 mm • Drive power: 15 kW • Rotor speed: 90 rpm Location: Arriving in stock at 54634 Bitburg - Available by arrangement -

Stanje: novo, Leto izdelave: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our Machine Concept WL 6 Weima high-performance shredders, with their flexible range of applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips, achieving significant volume reduction of bulky materials. Functionality: The machine is equipped with a large feed hopper, which can be loaded either by conveyor belt or manually. This hopper can be customized according to individual requirements and ensures continuous and cost-effective material feeding without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of rotor: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection rating: 400 V ±5% / 50 Hz Weight: approx. 1,600 kg Includes: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starting - Rubber vibration absorber elements - V-rotor (patented) with profile-milled knife pockets - Gear limit switch Iodpfx Abecbtpksxjth - Pressure bar - Very robust Weima WAP gearbox Recommended Accessories - Logspacer (self-cleaning hopper) - Second row of knives Ex-stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multi-turnable Hydraulically actuated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - automatic star/delta start-up - fast hydraulic system - automatic shut-off during rotor idle - Rotation speed 70-90 rpm for high throughput Itsdpfxsv Sqrpj Abxoh - Intermittent control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer . Included: - Shredder raised by 30 cm (prepared for conveyor belt) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronised with the shredder) . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Included: + Profile rotor for increased throughput performance Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. Isdpfxed Db N Ie Abxjth We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €5,980 net - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear