Mdf nakup rabljenega (202)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Mali oglas
Nemčija
650 km
Edgebander
IMACombima Systems/I/R75/1370
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Ta robilni stroj IMA Combima Systems/I/R75/1370 je bil izdelan leta 2006. Obdeluje obdelovance v dolžini od 250 do 2800 mm in širini od 115 do 1300 mm, z debelinami do 40 mm. Namenjen je za materiale kot sta iverka in MDF, opremljen je z aplikatorjem toplotno taljivega lepila in servo podajalnim sistemom robnega traku. Idealen za visoko kakovostno obdelavo robov – razmislite o nakupu tega stroja IMA Combima Systems/I/R75/1370. Za več informacij o tej napravi nas kontaktirajte.
Nodox D I Hqopfx Adyowb
Vrste uporabe
Obdelava robov
Mali oglas
Jelonek
717 km
LIFTER Vakuumsko dvigalo za plošče
Klic
Leto izdelave: 2025, Stanje: novo, Column-mounted jib crane with electric hoist and vacuum lifter for short-distance handling of MDF boards, laminated boards, and medium-density particleboards, etc. Maximum lifter capacity: 200 kg.
Brand new equipment, sample images shown.
TECHNICAL DATA:
Supporting structure:
– Column with jib arm, max. load capacity 250 kg, RAL 9002 (grey-white colour)
– Arm length: 6 m
– Total column height: 3 m; usable height under jib: 2.7 m
– 270° rotation
– Base plate for anchoring to industrial concrete floor
– Positioning brake
– Enclosed electrical circuit
Hoist:
– Brand: RWM, model 250
– Lifting speed: 4 m/min
Vacuum lifter for MDF, laminated boards, and medium-density particleboard, max. capacity 200 kg:
Nedpfx Aexl Htredyewb
– 2 vacuum suction pads, each 520x320 mm
– Manual rotation of suction pads 0°/90°
– Vacuum pump, compressed air requirement: 390 Nl/min
– Operating pressure: 8 bar
– Pressure regulation valve with gauge indication
– Acoustic signal in case of pressure drop
Mali oglas
Poljska
710 km
Pločevinasta žaga
FORMAT4Kappa Automatic 80
Klic
Leto izdelave: 2017, Stanje: pripravljen za uporabo (rabljen), Panelna žaga FORMAT4 Kappa Automatic 80 je bila izdelana leta 2017. Ima dolžino reza 3200 mm, premer žaginega lista 320 mm in izstop lista 80 mm. Voziček žage je robusten, zasnovan za neprekinjeno in serijsko proizvodnjo. Vključuje avtomatski podajalni in vpenjalni sistem za učinkovit potek dela ter učinkovito odsesovalno napravo prilagojeno zahtevnim okoljem. Idealno za razrez pohištvenih plošč, MDF, vezanih plošč in lesnih ploščastih materialov. Za več informacij nas kontaktirajte.
Vrste uporabe:
Nwodpfxox Eniqj Adysb
Žaganje (les)

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Leipzig
609 km
Obdelovalni center
FORMAT-4profit H10 22.43
Klic
Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.800 h, No. 3131
CNC Machining Centre FORMAT-4 profit H10 22.43
Used, year of manufacture 2017
Operating hours approx. 1800 h
Package consisting of CNC Machining Centre FORMAT-4 profit H10 22.43, Feeding Unit FORMAT-4 L-Motion, and Extraction System FELDER RL 300
CNC Machining Centre FORMAT-4 profit H10 22.43 Technical Data:
Phenolic resin matrix table system
Grid table with two stop rows
Automatic central lubrication
HARDWARE control computer
Mobile control console
Njdpfxorrh T Aj Adyowb
Handheld terminal for remote axis control
Two vacuum pumps, rated output 2 x 250 m3/h
Tool changer with 10 tools
Tool changer on the left in the machine frame: 8 tool positions for HSK
Milling spindle 12 kW (S6) HSK F63, 24,000 rpm
Central extraction via combined connections (D=250mm)
Software: Woodflash German (H20/H08/H10/H50)
Axis travel H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm
Working area: X= 4300 mm / Y= 2160 mm / Z= 105 mm
Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min
Feeding Unit FORMAT-4 L-Motion Technical Data:
Year of manufacture 2017
2-axis version with 4 storage positions for loading an H10 with lifting table
CNC loading
Gentle transport
Fully automatic panel handling
Workpiece dimensions: Length 2000-4200 mm / Width 600-2100 mm / Thickness from 8 mm / Panel weight 200 kg
Density: Chipboard 650 kg/m3 / Raw MDF 750 kg/m3
Stack height 1800 mm
Extraction System FELDER RL 300 Technical Data:
Year of manufacture 2023
Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning
Compressed air connection 3/4 inch
Connection pressure 7 - 12 bar at 40 NL/min
Operating pressure in the unit 6 bar
Chip container volume 500 l
Fire extinguishing system with powder extinguisher, 12 kg dry powder extinguisher
Sale on behalf of customer, ex location Leipzig, without dismantling, transport, or installation
Errors in description and price reserved
Dismantling and loading by us is available as an option
To avoid misunderstandings, on-site inspection by appointment is possible and recommended
Sale takes place in as-is condition
Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee
Subject to prior sale
For used machines, any warranty is excluded; sold as seen
Pictures and videos are examples and do not represent the actual scope of delivery
Payment terms: Prices plus statutory VAT, payment prior to collection or shipping
Delivery terms: ex location
Mali oglas
Sulzberg
394 km
Pločevinasta žaga v pokončnem položaju
Striebig5220 A
Klic
Stanje: dober (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 300 mm, zahteva za prostor dolžina: 5.200 mm, potrebna višina: 2.700 mm, skupna širina: 1.200 mm, vhodni tok: 9 A, moč: 5,8 kW (7,89 KM), Striebig Vertikalna žaga za plošče
Proizvajalec: Striebig AG (Švica)
Model: 5220 A
Leto izdelave: 1983
Tip stroja: Vertikalna žaga za plošče / Vertikalna žaga
Izvedba: Ročna
Tehnični podatki
Rezkalna enota
Hitrost vrtenja: 4.750 obr/min
Motor & elektrika
Moč motorja: pribl. 5,80 kW
Priklop: 400 V / 50 Hz / trifazni tok
Mere in teža
Mere namestitve stroja (ŠxV):
pribl. 520 × 270 cm (= 5.200 × 2.700 mm)
Teža:
pribl. 750–850 kg
Ostale značilnosti
Robustna industrijska izvedba
Primerna za iverne plošče, MDF, OSB, lepljen les, obložene plošče
Nsdox Af Amspfx Adyjwb
Preizkušena Striebig kakovost
Mali oglas
Neukamperfehn
962 km
Voziček za police, nov 2.150 x 1.550 x 600 mm
Lücht & PalmLPR
Klic
Stanje: novo, Technical specifications for tiered trolley:
Manufacturer: LPR
Model: 600
01x Tiered trolley, new
Colour: blue / orange
Overall height incl. castors: 2,150 mm
Overall width: 1,550 mm
Overall depth: 600 mm
Number of levels: 3 pcs.
Consisting of:
02x Workbench uprights, new
Colour: blue
Upright profile: 50 x 50 mm
Upright height: 2,000 mm
Upright depth: 600 mm
Incl. cross and diagonal struts, metal base plates, plastic end caps
Uprights pre-assembled (bolted lattice construction)
06x Workbench beams, new
Colour: orange
Type: stepped beam
Beam profile: 80 x 50 mm
Clear width: 1,450 mm
Load capacity: 300 kg with evenly distributed load
12x Safety pins, new
Finish: fully galvanised
For securing the cross beams against accidental lifting
03x Chipboard or MDF, second choice
Chipboard thickness: 22 mm
Chipboard width: 1,430 mm
Chipboard depth: 545 mm
02x Double stop swivel castors, new
Wheel size: 125 x 37 mm
Mounting plate: 105 x 80 mm
Galvanised steel rim with hub and thread protection
02x Swivel castors, new
Wheel size: 125 x 37 mm
Mounting plate: 105 x 80 mm
Galvanised steel rim with hub and thread protection
08x Machine screws: M8 x 20 mm
08x Nuts: M8
08x Washers: 8 mm
- Workbenches are supplied unassembled;
- Workbench uprights are pre-assembled;
Njdpoqzg T Uofx Adyswb
- Usual production time is approx. 3 – 5 working days.
Mali oglas
Neukamperfehn
962 km
Delovna miza Delovna miza Pakirna miza Miza
Metal Sistem Super 4/5/6Abm.: 1.200 x 900 x 900 mm (B x T x H)
Klic
Stanje: novo, We offer you here a new workbench from the manufacturer Metal Sistem for sale.
Delivery time: approx. 3 - 4 weeks
Technical data of the workbench:
Manufacturer: Metal Sistem
Model: Super 4/5/6
Workbench width: 1,200 mm
Workbench depth: 900 mm
Workbench height: 900 mm
Scope of delivery includes:
02x workbench uprights, new
Material finish: fully galvanized
Upright type: TS4
Including cross and diagonal braces,
Base plates
Uprights are pre-assembled
(bolted truss construction)
723 mm high
700 mm deep
04x workbench beams, new
Beam type: TS
Profile dimension: 70 x 42 x 3 mm
Clear width: 920 mm
Material finish: fully galvanized
01x worktop, new
Wood type: MDF
Thickness: 28 mm
Nodpfx Aehq Txhjdyewb
Dimensions: 900 x 1,200 mm
Material color: black
03x steel shelves, new
Dimensions: 300 x 700 mm
Type: H29/D
02x swivel castors, new
02x brake/swivel castors, new
01x bracket set, new
For securing the worktop
08x safety hooks, new
Material finish: fully galvanized
Mali oglas
Neukamperfehn
962 km
Delovna miza Delovna miza Pakirna miza Miza
Metal Sistem Super 4/5/6Abm.: 1.200 x 900 x 900 mm (B x T x H)
Klic
Stanje: novo, We are offering you a new workbench from the manufacturer Metal Sistem for purchase.
Delivery time: approx. 3 - 4 weeks
Technical data of the workbench:
Manufacturer: Metal Sistem
Model: Super 4/5/6
Workbench width: 1,200 mm
Workbench depth: 900 mm
Workbench height: 900 mm
Scope of delivery includes:
02x workbench uprights, new
Material finish: fully galvanized
Upright type: TS4
Including cross and diagonal braces,
Base plates
The uprights are pre-assembled
(bolted truss construction)
Njdpfx Adehq Twyjyswb
888 mm high
700 mm deep
04x workbench beams, new
Beam type: TS
Profile dimension: 70 x 42 x 3 mm
Clear width: 920 mm
Material finish: fully galvanized
01x worktop, new
Wood type: MDF
Thickness: 28 mm
Dimension: 900 x 1,200 mm
Material color: black
03x steel shelves, new
Dimension: 300 x 700 mm
Type: H29/D
01x angle bracket set, new
For fastening the worktop
08x safety hooks, new
Material finish: fully galvanized
Mali oglas
Neukamperfehn
962 km
Delovna miza Delovna miza Pakirna miza Miza
Metal Sistem Super 4/5/6Abm.: 1.200 x 900 x 900 mm (B x T x H)
Klic
Stanje: novo, We offer you here a new workbench from the manufacturer Metal Sistem for purchase.
Nedpfxohq Txwj Adyswb
Delivery time: approx. 3 - 4 weeks
Technical data of the workbench:
Manufacturer: Metal Sistem
Type: Super 4/5/6
Workbench width: 1,200 mm
Workbench depth: 900 mm
Workbench height: 900 mm
Scope of delivery includes:
02x workbench legs, new
Material colour: fully galvanized
Leg type: TS4
Including cross and diagonal braces, footplates
Legs are pre-assembled (bolted truss)
723 mm high
700 mm deep
02x workbench beams, new
Beam type: TS
Profile dimensions: 70 x 42 x 3 mm
Clear width: 920 mm
Material colour: fully galvanized
01x worktop, new
Wood type: MDF
Thickness: 28 mm
Dimensions: 900 x 1,200 mm
Material colour: black
02x swivel castors, new
02x brake/swivel castors, new
01x angle bracket set, new
For attaching the worktop
04x securing hooks, new
Material colour: fully galvanized
Mali oglas
Neukamperfehn
962 km
Delovna miza Delovna miza Pakirna miza Miza
Metal Sistem Super 4/5/6Abm.: 1.200 x 900 x 900 mm (B x T x H)
Klic
Stanje: novo, We are offering you a new workbench from the manufacturer Metal Sistem for purchase.
Delivery time: approx. 3 - 4 weeks
Technical data for the workbench:
Manufacturer: Metal Sistem
Model: Super 4/5/6
Workbench width: 1,200 mm
Workbench depth: 900 mm
Workbench height: 900 mm
Nwjdpfx Adohq Tqdoyob
Scope of delivery includes:
02x Workbench frames, new
Frame color: fully galvanized
Frame type: TS4
Incl. cross and diagonal braces,
base plates
The frames are pre-assembled
(screwed truss construction)
888 mm high
700 mm deep
02x Workbench beams, new
Beam type: TS
Profile dim.: 70 x 42 x 3 mm
Clear span: 920 mm
Material color: fully galvanized
01x Worktop, new
Wood type: MDF
Thickness: 28 mm
Dimensions: 900 x 1,200 mm
Material color: black
01x Angle set, new
for fastening the worktop
04x Safety hooks, new
Material color: fully galvanized
Mali oglas
Biery
500 km
Vakuumsko dvigalo za plošče + žerjav
DS Systemsc250
Klic
Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.000 mm, skupna masa: 820 kg, nosilnost: 500 kg, The offer concerns the following set: (possibility to customize equipment parameters or to purchase the vacuum lifter or crane separately)
- Vacuum lifter for panels, designed among others for: MDF panels, laminated, raw panels, particle boards, etc. (model: WOOD SYSTEM DS 250)
- Stationary jib crane
- Electric chain hoist
- Manual trolley
Features of the WOOD SYSTEM DS 250 vacuum lifter:
- Designed for the handling of panels
- Actuator for tilting between vertical and horizontal positions
- 6 suction cups Ø 200 mm
- Construction allowing adjustment of the suction cup layout to adapt to different material dimensions
- Beam length: 2500 mm
- Each suction cup is equipped with a ball valve, allowing for individual disengagement
Njdpfx Adoxln Dreyewb
- Compressed air pulse feature to prevent the “sticking” effect of materials
- Individual X and Y axis adjustment of each suction cup
- Operation from the control console (control panel):
- Switching the aggregate on/off
- Vacuum supply/release
- Electric hoist control via thumb lever – lifting/lowering the lifter
- Manometer
- Compressed air supply – integrated vacuum generators
- Load capacity: 400 kg
- Device weight: 100 kg
- CE Certificate
Stationary Jib Crane
Technical specifications:
• Column height: 4 m
• Clearance under boom: 3 m
• Boom length: 4 m
• Load capacity: 400 kg
• Slewing range: 270 degrees
• Lifting speed: approx. 3 m/min
• Any RAL colour available
• Manual slewing of crane
• Manual trolley
• Quadruple / double roller-bearings on the boom for smooth rotation
• Electric chain hoist
• CE Certificate
INCLUDED IN THE PRICE:
• Column-mounted jib crane
• Single-phase electric hoist
• Manual trolley
• CE Certificate
• Complete documentation
Standard warranty: 12 months
Mali oglas
Włoszczowa
638 km
Obdelovalni center
BIESSE-UNITEAMUnica
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Naprodaj CNC Unica, leto izdelave 2003, z raster mizo, znamka Uniteam, ki spada pod Biesse.
Nwodpfxowk Ekcs Adyeb
CNC obdelovalni center Biesse-Uniteam Unica, leto izdelave 2003, z raster mizo, idealen za rezkanje lesa, MDF, plošč, pohištvenih front, nosilcev ipd. Poleg vakumskega raster stola so vključene tudi pnevmatske vpenjalne sponke.
Max. delovno območje (X-Y-Z) mm: 3440 x 1300 x 200
Moč vretena: 9 kW
Dimenzije stroja: 5000 x 2350 x 2200 mm
Teža: 4000 kg
Mali oglas
Rodgau
625 km
Drobilnik
WeimaWL4
Klic
Stanje: rabljeno, Leto izdelave: 2023, Demonstration machine! List price: €33,390.
Machine Concept:
Weima high-performance shredders, with their flexible applications, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips. In doing so, they achieve enormous volume reduction for bulky materials.
Operation:
The machine is equipped with a large feed hopper and can be loaded either via conveyor belt or manually. The hopper can be tailored to individual requirements and ensures a continuous and cost-effective material feed, negating the need for manual intervention.
A hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor, with automatic, load-dependent control. The internal pusher guides are made from highly wear-resistant plastic (polyamide) and can be adjusted as needed. The hydraulic cylinders are universally mounted to prevent lateral forces on the piston seals.
The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and fourfold indexable knives/cutting crowns are mounted in milled knife pockets on special knife holders. This patented system ensures – for the first time – minimization of the cutting gap between counterknife and rotor, enabling high throughput, low energy consumption, and optimal discharge of shredded material.
Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft.
Standard Equipment:
- V-rotor with one knife row (40 x 40 mm)
- Vibration-damping machine feet
- Hold-down device on the pusher
- Horizontal pusher
Nwjdpfx Aevfy Rzedysb
- Control cabinet with 5 m cable incl. PLC controller and LOGO! text display
- Bolt screen
- WEIMA WAP gearbox
- Extraction port, Ø160 mm
- Straight hopper
Optional Equipment:
- Additional rotor knife row (28 blades)
- Anti-bridging hopper (LOGSPACER)
- Segment floor, four-sided
- Fast reverse hydraulics with shock valve
Location:
Mali oglas
Rodgau
625 km
CNC obdelovalni center
HolzfraeseAxolox 2513
Klic
Stanje: rabljeno, Leto izdelave: 2024, New demonstration machine!! List price: €52,742 net. Gantry router, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame, with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings pre-configured lengthwise and crosswise. Mechanical set consisting of profile guides incl. profile guide carriages, ball screws, and precision racks. All elements assembled, pre-lubricated incl. trial run, ready for immediate operation.
Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance power stages, power supply, and toroidal core transformer, completely pre-assembled in the control cabinet, as well as sensors for each axis. Switching relay for automatic control of existing extraction system.
Brush seals for dust protection, as well as CE-compliant safety devices through mobile extraction hood and unilateral laser scanner for work area monitoring, with 275° and 5.5m area coverage (machine positioning in a room corner). Handheld control unit with all necessary functions for machine operation, incl. emergency stop button and dead man's switch. Tool length sensor for determining tool length and changing the active zero point offset. High-frequency spindle with 2.2 kW, incl. collet nut, frequency converter, mains filter, brake resistor, and collet set. Built-in monitor, incl. mini PC with Windows 10, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 7.0 and CAM license Estlcam V11, as well as all necessary documentation provided by email before delivery.
Vacuum table: Milling bed constructed as vacuum table, consisting of four adjustable segments. Cross table made of PE with a cover plate. Vacuum pump by Becker with a capacity of 100 m³/h, oil-lubricated. For the vacuum pump’s power connection, a 16 amp, 400 V AC plug is required. Customer provides HDF 3mm double-sided raw for the entire vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels)
Tool set in Systainer:
Tool set in Systainer consisting of:
- 1 pc. 1.5mm left (HF152LIVHM)
- 1 pc. 3.175mm 30° (HF30GVHM)
- 1 pc. 6mm 90° (HF90GVHM)
- 5 pcs. 4mm Z2 (HF41REVHM)
- 1 pc. 5mm Z2 (HF52REVHM)
- 1 pc. 5mm Z3 (HF53SRECAR)
- 2 pcs. 5mm Z2 (HF52REDIA)
- 1 pc. 5mm Z2 (HF52UPDOWN)
- 1 pc. 4mm Z3 (HF43REVHM)
- 1 pc. 6mm Z1 (HF61REVHM)
- 1 pc. 8mm Z2 (HF82LAVHM)
- 1 pc. 10mm Z2 (HF10SVHM)
- 1 pc. 12mm Z2 (HF12SVHM)
Maintenance kit in Systainer:
Maintenance kit in Systainer containing: hand pump 150 ml, one cartridge of high-performance grease 400 g, spray can of silicone grease 500 ml, one grease nipple incl. hose section, and 30mm face mill with indexable inserts.
Nwjdpjw Tfy Usfx Adysb
Pneumatic unit:
Pneumatic unit consisting of four cylinders, throttle check valve, push-in fittings, angled push-in fittings, silencer connections, filter regulator, push-in distributor, PE hose and holders, for use in a pre-configured table opening (for processing on the face side). If pneumatics are required for both table openings, the position must be calculated twice. (NOTE: Compressor must be provided by the customer)
Technical data:
- Travel: (X / Y) 2500 x 1300 mm, Z = 200 mm
- Dimensions: (L / W) 1980 mm, 3800 x 2300 mm, H = 1900 mm
- Footprint: approx. 20 m² (minimum installation area)
- Weight: 1500 kg
- Nominal voltage: 400 V
- Repeatability: +/- 0.1 mm
- Connection load: 4.3 kW
- HF spindle: 2
Mali oglas
Ebermannstadt
494 km
Oblikovanje in rezkanje
WEINIGPowermat 2500
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 230 mm, delovna višina: 120 mm, moč pogonskega motorja podajalnika: 37.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 3.000 obr/min, vrsta nastavitve višine: električni, premer gredi skobeljnika: 50 mm, vrsta vhodnega toka: trifazni, število vreten: 10, moč: 574 kW (780,42 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, vrtilna hitrost brezstopenjsko nastavljiva, Weinig Powermat 2500
10 spindles,
Working width: 230 mm,
Working height: 120 mm,
Spindle diameter: 50 mm,
Feed unit: 37 kW / 12–120 m/min,
Spindle configuration:
1–Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer
2–Right (11 kW)
3–Left (11 kW)
4–Top (37 kW) – with fully automatic straight jointer
5–Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer
6–Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer
7–Top (53 kW) – with hydraulic clamping, variable speed 3000–6000 rpm
8–Bottom (53 kW) – with hydraulic clamping, variable speed 3000–6000 rpm
9–Top (53 kW) – with hydraulic clamping, variable speed 3000–6000 rpm
10–Bottom (53 kW) – with hydraulic clamping, variable speed 3000–6000 rpm
Short infeed table 1.3 meters (4 rollers)
with 2 powered rollers above the table,
and 2 powered rollers integrated into the table. Both table rollers
are liftable. Table height adjustment with electronic digital display.
Nodpfxexz Thbs Adyjwb
Incl. 2 heavy-duty side pressure rollers, diameter 140 mm,
pneumatic.
Mounting feet, height 320 mm, for table height 1190 mm
Marathon P O W E R Coating
for machine table, fences and guiding rails (excluding
infeed table and special table plates).
Special coating for protecting table tops, fences, and
guiding rails against excessive wear. Recommended for processing
abrasive materials (e.g., tropical woods, MDF,
chipboard, plastics, metals).
Automatic lubricant pump for table de-resining.
Powered rollers in the machine table, hardened.
Heavy steel pressure rollers from above,
diameter 120 mm. Located at the right and left spindle positions.
Mali oglas
Nemčija
661 km
CNC obdelovalni center
HolzfraeseHP 1890
Klic
Stanje: rabljeno, Leto izdelave: 2019, Used machine
Year of manufacture: 2019
Only 110 operating hours!
Features and technical data:
Travel distances:
Njdpfx Adsw Nadyoyowb
- X = 1800 mm
- Y = 900 mm
- Z = 80 mm
Constructed from 18 mm Koskisen panels.
Milling bed made from 19 mm MDF as a sacrificial board, equipped with guide rails and T-slot nuts for workpiece clamping.
Base frame with reinforcements, filled with polymer concrete, prepared for transport via pallet truck or forklift.
Mechanical set consisting of profile linear guides including carriages, as well as ball screw drives 2010 and 1605 for all axes.
Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets.
Control set comprising a Triple Beast controller for 3-axis control, with Ethernet connection.
Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm, with motor cables, as well as a 48 V, 6.7 A switch-mode power supply, LED board for breakout board, ribbon cables and proximity sensors, small parts such as wire cables, ferrules, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical kit and emergency stop.
- 21.5 inch monitor as built-in screen, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic console.
Tool length sensor for tool length measurement and updating active zero offset.
Optional equipment:
- High-frequency spindle with 2.2 kW, including clamping nut, frequency inverter, line filter, brake resistor, and collet set.
- PC with 8 GB RAM and AMD processor
- CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models
Availability: short-term
Location: Flörsheim
Mali oglas
Neckartailfingen
511 km
Sekalniki lesa, drobilniki, sekalniki
mütekMRZ 830 ECO
Klic
Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours
Another machine available immediately (ex works Neckartailfingen)
Shredder MRZ 830
Commodity code: 84659600
Feed opening: 800 x 1000 mm
Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase
Knives: multi-turnable
Hydraulically actuated pusher
Screen perforation of your choice (10 - 40 mm)
Weight approx. 1,600 kg
Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm
Turbo coupling
Standard features included:
- automatic star/delta start-up
- fast hydraulic system
- automatic shut-off during rotor idle
- Rotation speed 70-90 rpm for high throughput
- Intermittent control to avoid idle times
- Performance-enhancing step control for the hydraulic pusher
- Pertinax guides for the hydraulic pusher
- Vibration-damping machine feet
- CE compliant
.
The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer
.
Included:
- Shredder raised by 30 cm (prepared for conveyor belt)
Additional shredder options:
- Angled conveyor belt + €8,770 net
Horizontal section: 1200 mm
Inclined section: 2500 mm
Angle: adjustable from 0-60 degrees
Nwedpfx Aev Sqrpsdyjb
Discharge height: approx. 2000 mm
+/- 100 mm
- Overband magnet + €6,780 net
- Control for conveyor belt and overband magnet + €2,750 net
(Start and stop synchronised with the shredder)
.
Raw material requirements:
- Moisture content (absolutely dry) must be below 30%
- Metals and mineral impurities such as sand, stones, etc. lead to increased wear
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje
muetekMRZ 530 ECO - 15 kW
Klic
Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530
Included:
+ Profile rotor for increased throughput performance
Options:
Double knife row + €895 net
Veneer and paper stripper + €970 net
* recommended for extremely thin materials with a thickness less than 3 mm
Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation.
We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos.
Machine data:
Motor: 15 kW; 400 V - 50 Hz - 3 ph,
Knives: reversible multiple times,
Rotor diameter: 260 mm,
Control: Siemens S7-1200 PLC,
Hopper (mm): 510 x 810 mm,
Hopper volume approx. 0.4 cbm,
Throughput capacity: 1 – 5 hopper fillings/h,
Hydraulically operated pusher,
Screen perforation as required (10 – 40 mm),
Suction connection Ø 160 mm,
Weight approx. 1,000 kg,
Dimensions approx. 1550 x 1100 x 1640 mm,
Nwsdpfod Db N Isx Adyjb
Moisture content of raw material: must be below 30% absolutely dry.
Standard features:
• Fast hydraulic system
• Profile rotor
• Control cabinet with Siemens PLC control
• Automatic star-delta start-up
• Automatic shutdown in case of idling rotor
• Removable extraction chute
• Rotation speed 70 – 100 rpm for higher throughput
• Intermittent control to avoid idle times
• Performance-enhancing step control of the hydraulic pusher
• Stable guides for the hydraulic pusher
Additional shredder options:
- Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net
- Angled conveyor belt + €8,770 net
Horizontal section: 1200 mm
Inclined section: 2500 mm
Angle: adjustable 0-60 degrees
Discharge height: approx. 2000 mm
+/- 100 mm
- Overband magnet + €5,980 net
- Synchronised control for conveyor and overband magnet + €2,750 net
(Start and stop synchronised with the shredder)
Requirements for input or raw material:
- Moisture content (absolutely dry) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc., cause increased wear
Mali oglas
Neckartailfingen
511 km
Drobilec lesa, drobilec, sekljalnik
mütekMRZ 830 ECO
Klic
Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months
Shredder MRZ 830
Commodity code: 84659600
Nwedpfx Ajd Dgw Usdysb
Feed opening: 800x1000 mm
Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase
Blades: multiple cutting edges (reversible)
Hydraulically operated pusher
Screen perforation size as desired (10–40 mm)
Extraction nozzle Ø 200 mm
Weight approx. 1,600 kg
Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm
Turbo coupling
Standard features included:
- Automatic star/delta start
- High-speed hydraulics
- Automatic shut-off when the rotor runs idle
- Rotor speed 70–90 rpm for high throughput
- Intermittent control to avoid idle times
- Performance-enhancing step control of the hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE conform
The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer.
Additional shredder options:
- Height increase by 30 cm (preparation for conveyor belt) + €2,140 net
- Angled conveyor belt + €8,770 net
Horizontal section: 1200 mm
Inclined section: 2500 mm
Angle: adjustable from 0–60 degrees
Discharge height: approx. 2000 mm (+/- 100 mm)
- Overband magnet + €5,980 net
- Controls for conveyor and overband magnet + €2,750 net
(Start and stop synchronized with shredder)
Raw material requirements:
- Moisture content (atro) must be below 30%
- Installation temperature: heated room, minimum +5°C
- Metals and mineral contaminants such as sand, stones, etc. increase wear
Mali oglas
Teisendorf
253 km
Drobilnik lesa
UnthaLR700
Klic
Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), Untha LR 700 Single-Shaft Shredder, new
Drive power: 18.5 kW
Nedpsu Id Ugofx Adyjwb
Hydraulic drive power: 1.1 kW
Rotor diameter: 300 mm
Rotor speed: 98 rpm
Number of indexable inserts: 19
Feed opening: 700 x 1065 mm
Extraction nozzle diameter: 200 mm
Required extraction velocity: 28 m/s
Recommended duct diameter: 200 mm
Weight: approx. 1,800 kg
Workplace sound pressure level LPA at 1 m: 82 dB(A)
Screen perforation diameter: 15 – 40 mm
Throughput capacity*: up to 6 stacked cubic metres per hour (dependent on material and screen perforation)
Applications
- Hard and softwood
- OSB
- Chipboard
- MDF
- Veneer
- Offcuts
- Reliable and economical cutting system
- Unique geometry of indexable inserts
- Low-wear screen
- Powerful and low-wear swing pusher
- Energy-efficient and trouble-free drive concept
Mali oglas
Norveška
1.491 km
Obdelovalni center
SCM Accord25 fxm
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.970 mm, pomik osi Y: 2.120 mm, pomik po osi Z: 250 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 60 m/min, hitrost podajanja osi Y: 60 m/min, hitrost podajanja os Z: 30 m/min, hitrost vretena (min.): 600 obr/min, največja hitrost vretena: 20.000 obr/min, moč vretenovega motorja: 12.000 W, število mest v zalogovniku orodij: 24, montažni premer: 350 mm, teža orodja: 8 g, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, Oprema: dokumentacija / priročnik, Komplett maskin med Coral filtersystem og SCM-løfter til salgs.
Utstyret har svært lite bruk.
CNC-bearbeidingssenter med mobil portalkonstruksjon og fast arbeidsbord for bearbeiding av heltre og ulike materialtyper: limtre, kryssfiner, sponplater, MDF, aluminium m.m.
Njdpfx Aowd Nrdjdyewb
Maskinen er designet med avanserte 3D-solid-modelleringsteknikker. Konstruksjonen består av en maskinramme og en mobil portal i elektro-sveiset stål. Bearbeiding av rammens komponenter skjer på høykvalitets CNC-maskineringssentre, med kun én oppspenning for å sikre optimal planhet, vinkelretthet og presise toleranser.
Styringen er en numerisk kontroll med grensesnitt til en industriell PC. CNC-løsningen med PC kombinerer alle egenskapene til numeriske styringer med brukervennligheten til en personlig datamaskin. PC-en gjør det mulig å benytte operatørgrensesnittet Maestro cnc, utviklet av SCM for raskt og enkelt maskinprogrammering, selv for mindre erfarne operatører.
Tekniske spesifikasjoner:
- Borede og gjengete hull med 120x120 mm avstand for vakuumtilkobling av jigger og utstyr
- Sporfelt med 40 mm avstand for sugekopper eller gummipakninger
- 2 arbeidsområder
- Maksimal bearbeidingslengde i Y-retning = 2170 mm
TELESOLVE fjernservice via internett
Mobil konsoll med "eye-M PRO" integrert PC
TECPAD – fjernstyring av maskin
Mobil konsoll med 7” farge touch-skjerm for styring og administrasjon.
PRISMA KT Bearbeidingshode
Bearbeidingshodet med 5 interpolerte akser er montert direkte på den bevegelige portalen og sikrer maksimal stivhet under fresing, med topp overflatekvalitet selv ved kraftig materialavvirkning.
Tekniske spesifikasjoner:
- Fresenhet med 5 interpolerte akser
- Elektromotor/spindel med HSK 63F hurtigvekslings system
- Turtall 600–20 000 rpm
- Høyre- og venstreløp
- Maks ytelse (S1/S6): 11/12 kW (15/16,5 HK) fra 9000 rpm
- Inverter
- C-akse rotasjon: 640°
- B-akse rotasjon: 270°
- C-akse med TTS låsesystem (Total Torque System – SCM-patent)
- Vedlikeholdsfri fett-smøring
- Væskekjøling med varmeveksler
- Automatisk avsugshette med fire posisjoner og ON/OFF styring fra programmet
To vakuumpumper 250 (300) m³/t – 50 (60) Hz
Vakuumpumpe for hver halvdel av bordet. Uavhengig vakuumkrets for hver halvdel.
PRO-SPACE Sikkerhetssystem
– Fullstendig beskyttelse av bearbeidingshode med ejektionsgardiner og støtfangere med nød-sensorer
– Nødkabel i operatørsonen
– Bakre og sidebeskyttelse langs hele maskinens omkrets
Lukket kabelkjede
MAESTRO ACTIVE operatørgrensesnitt (HMI)
Maestro active er nytt HMI-software, felles for alle SCM-teknologier. En enkelt operatør kan tryggt betjene flere SCM-maskiner, noe som forenkler opplæring og drift.
Windows 10 embedded 64 bit operativsystem
Maestro cnc programmeringsprogramvare
MAESTRO CNC SOFTWARE SUITE – BRUKERGRENSESNITT OG PROGRAMMERING
Avansert nesting fritidsform + etikettmodul for Maestro cnc
Rapid 24 – Bakenforliggende verktøymagasin
Sirkulært verktøymagasin montert på den mobile portalen.
Maksimal lastekapasitet: 96 kg
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Barntrup
778 km
Drobilnik lesa / sekljalnik
WEIMAWL 12
Klic
Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 37 kW (50,31 KM), Droblilec
Nwsdpfx Aex E Rkdedysb
Proizvajalec: Weima
Tip: WL12
Droblilec za palete, MDF in vse ostanke lesa
Vložna odprtina: 1200 x 1200 mm
Volumen lijaka: pribl. 2 m³
Počasni droblilec s hidravlično potisno dno
Učinkovitost glede na material: 2–4 polnenja lijaka na uro
Motor: 37 kW
Drobilna nožna gred z 8-krat vrtljivimi noži (obojestranske lomilne plošče)
Nože je možno hitro in enostavno zasukati/zamenjati s pomočjo vijakov
Premer gredi nožev / premer rotorja: 368 mm
Hitrost vrtenja rotorja: 90 vrt./min
64 nožev
Premer izsesovalnega priključka: 200 mm
Hitrost zraka na izsesovalnem priključku: 28 m/s
Rotor in menjalnik obnovljena pred 6 leti
Dimenzije: 2500 mm x 1900 mm x 1750 mm (DxŠxV)
Teža: pribl. 3300 kg
Mali oglas
London
1.256 km
Pločevinasta žaga
StriebigCompact
Klic
Stanje: rabljeno, Leto izdelave: 2018, Striebig Compact Vertikalna Žaga za Plošče – Model 2018 – Odlično Stanje
Nsdpfox Dh T Djx Adyjwb
Redka priložnost za nakup vertikalne žage Striebig Compact, letnik 2018, ki je bila skrbno vzdrževana. Ta stroj, poznan po švicarski natančnosti in robustni izdelavi, je popoln za natančno vertikalno in horizontalno rezanje plošč v omejenem prostoru delavnice.
Osnovni podatki:
Znamka/Model: Striebig Compact
Letnik: 2018
Stanje: Odlično – čist, zanesljiv in servisiran
Kapaciteta rezanja: Idealna za rezanje velikih plošč (MDF, vezana plošča, laminati ipd.)
Uporaba: Lahka do zmerna – ni bil intenzivno uporabljen
Lokacija: N18
Dobavljivost: Takoj na voljo za prevzem v severnem Londonu
Lastnosti:
Gladki in natančni vertikalni ter horizontalni rezi
Prostorsko varčna zasnova – idealna za manjše delavnice
Močan okvir in vodila
Priključek za odpraševanje
Striebig je zlati standard med vertikalnimi žagami za plošče, saj zagotavlja vzdržljivost, varnost in izjemno natančnost.
Mali oglas
San Giovanni Al Natisone
125 km
Stroj za nanašanje premazov
CAMBERYCWM.300.P
Klic
Stanje: novo, Leto izdelave: 2023, številka stroja/vozila: W030P23-02, Laminating machine for wood, MDF, PVC, and composite profiles
Nedotrymgepfx Adyswb
The NWA WOOD system is ideal for laminating profiles and moldings made of wood, MDF, composite, PVC, etc. with decorative foils or roll paper. The adhesive technology allows the use of EVA hotmelt, polyolefinic, or PUR adhesives.
Mali oglas
Cantù
455 km
Spajalni stroj za lesene okvirje
BREVETTI MOTTA - ITALYVELOX
Klic
Stanje: dober (rabljeno), Koda: 0040
Znamka: BREVETTI MOTTA - ITALIJA
Model: VELOX - CE standard
Pnevmatski stroj za spajanje lesenih in MDF okvirjev, namenjen izdelavi pohištva, vrat, oken in drugih različnih elementov - skladno s CE standardom.
Tehnični podatki:
Enota za spajanje: št.
Nwsdpfx Aev Am Ibodyeb
Delo s profilom: maks. širina 120 mm - maks. višina 70 mm - min. širina 5 mm - min. višina 5 mm
Možna urna proizvodnja: 150/200 dokončanih okvirjev
Delovni tlak: 6 bar (stisnjen zrak)
Skupne dimenzije: 500 x 680 x 1250 mm (višina)
Teža: 75 kg
Olajšamo vam iskanje: "mdf"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Mdf (202)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec



























































































































































