Vrtalni stroj z več vreteni

Maggi Engineering Boring System 29

Stanje: zelo dobro (rabljeno), skupna širina: 1.300 mm, skupna dolžina: 3.500 mm, skupna masa: 7.000 kg, obratovalni tlak: 300 letvica, transportna širina: 1.600 mm, transportna višina: 2.350 mm, transportna dolžina: 4.350 mm, Polična stiskalnica za furniranje Simimpiantin 3500×1300 Gtsdexxpgbopfx Ad Asw Dolžina police: 3500 mm Širina police: 1300 mm Dva nalaga Stiskalnica z 8 cilindri Police ogrevane z vodo iz centralnega ogrevanja Maksimalni delovni tlak: 300 bar Premer batov: 80 mm Teža stroja: 7000 kg Mere stroja: 435x160x235 cm (V)

Stanje: rabljeno, Leto izdelave: 1992, Number of spindles (row drilling): 16 Number of horizontal spindles: 5 Godpfxswv Nb Ne Ad Aotw Cup hinge boring head: yes Drill spacing: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: tiltable

Stanje: zelo dobro (rabljeno), Genini Miniautomat Through-Feed Lathe Automatic lathe for machining squared timber Main spindle with dual-speed motor, power 4.9/5.9 kW Hydraulic pump motor power: 1.5 kW Maximum timber length: 950 mm Maximum turning length: 120 mm Gsdpfx Asv Hgctod Astw Maximum turning diameter: 80 mm Two carriages with profiling tools 1 face spindle for drilling or face profiling 1 rough turning tool Machine weight: approx. 1800 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 051888, Used Automatic Circular Saw Brand: Pedrazzoli Model: SB 350/45 AP Serial number: 051888 Gjdperfw Iksfx Ad Ajtw Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Removable pneumatic anti-burr vise. Pneumatic cylinder for the head movement, with brake for speed adjustment. Transmission with double expanding pulley for variable speed from 15 to 90 m/s. Pivoting head on adjustable self-lubricating bushings. 600 mm feeder stroke operated by pneumatic cylinder. Repeatable up to a maximum of 9 strokes, for a total feed length of up to 5400 mm. Maximum feeder clamp opening: 160 mm. Programmable piece counter. Minimum trim cut waste: 160 mm. Feeder speed adjustment valve. Ammeter. Reverse function. Emergency stop button and control panel lock switch. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Full safety guard designed for quick blade change. Blade diameter: Ø 350 mm. Cutting capacity: Round tubes 0°: 102 mm 45° right: 102 mm Square tubes 0°: 85 mm 45° right: 90 mm Rectangular tubes 0°: 158 x 85 mm 45° right: 120 x 85 mm Specifications: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Worktable height: 950 mm Weight: 420 kg

Stanje: novo, MAIN MACHINE FEATURES: -Single-head drilling machine for drilling at 0° to 90° -Pneumatically adjustable head angle -Cast iron fences -Spindles adapted for quick-change couplings -Patented pneumatic material clamps -Cast iron worktable -Fast and precise adjustment -High-precision drilling STANDARD MACHINE EQUIPMENT: -Two 1.5 m aluminium stops (right and left) with two position stops each -Five quick-release clamps Technical specifications: Number of spindles: 21 Distance between first and last drill: 640 mm Number of pneumatic clamps: 2 Distance between spindle centers: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Gtjdpfep Ecdgex Ad Ajw Spindle speed: 2800 rpm Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm

Leto izdelave: 1995, stanje: nepreverjeno (rabljeno), Connected load 380V 55A PMS control unit Pre-milling unit 1961 Magazine 1901 Gluing station 1906 Pressure unit 1926K End trimming unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm radius up to 15 mm flush Radius scraper 1927 Form milling unit 1983 Buffing unit 1941 Gedpfx Adjnxkm Ee Ajtw Extraction ports 1x160, 1x125 mm Compressed air connection 6 bar

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Control: Edge Control with 18.5" touchscreen color display (16:9), swiveling control panel, program memory, motorized pressure beam adjustment, feed via transport chain, feed speed 8-18 m/min, extendable workpiece support, motorized adjustable infeed fence gluing unit 1961, diamond jointing cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeder 1903 Pre-cutting up to 3 x 45 mm (material-dependent) Adhesive application system 1905 Multi-System automatic glue height adjustment with sensing nozzle, pressure regulator for cartridge press-on pressure control, use of PUR adhesives possible, Pressure section 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment Gtjdpev Sv Enefx Ad Asw End trimming saw pneumatically tiltable, Multifunctional unit 1824 MOT 4 with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separate for top and bottom) Chip collection box for radius scraper, Surface scraper 1964 for cleaning off glue residue for a clean glue joint with extraction hoods Spray system 1856 for infeed and outfeed zones Buffing unit 1940 for re-polishing and edge finishing ----- Technical Data ----- Edge thickness for coil material: 3 mm, Edge thickness for strip material: 8 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support clearance: 470 mm, Support plate diameter for edge material: 800 mm, End trimming blade for coil material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, End trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraping unit: 70 mm, Overall length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours comes from a 2022 snapshot Availability: short term Location: Röllbach

Stanje: rabljeno, Leto izdelave: 2018, max. workpiece length 4200 mm Milling spindle: 1 unit Main motor: 15 kW HOMAG CNC machining center BMG310/42/F/K, year 2018 ----- The machine is part of the sale of an entire window manufacturing operation. See stock number 1305-6979. The machines are still connected and ready for demonstration. Technical short summary: ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Overhead laser - Working dimensions: 4200 mm length, 1350 mm depth - 32-position disc tool changer - 8-position linear tool changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for PowerCLamp clamps, 8 pcs - approx. 30 vacuum clamps - 4 x PowerCLamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for box-type window frames For a detailed description refer to the attached PDF document! ----- Price on request! Optional items (subject to surcharge): Gtedpfx Adeyn R Iae Ajw ----- - Used Leitz tools for Homag with round arch production, suitable for SCM Windor 40 R systems #1305-6993. Price: €12,000 - Barbaric vacuum lifter, year 2015. Price: €4,500 - Used Löwer Minizinkepresse MZP 1 for round arch production. Price: €1,000 (Technical data according to manufacturer, without guarantee!)

Stanje: rabljeno, Leto izdelave: 2020, skupna višina: 2.100 mm, skupna dolžina: 2.000 mm, skupna širina: 2.500 mm, Price: On request - Machine available from: 2025-12-15 - Year of manufacture: 2020 - Documentation available: Yes - Type of documentation: Operating system, Technical data, User manual, Electrical circuit diagrams - CE marking present: Yes - CE certificate available: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [pcs.]: 3 - Working area X [mm]: 975 - Working area Y [mm]: 1321 - Working area Z [mm]: 243 - Number of milling spindles [pcs.]: 1 Gedpfx Adjx Ad R No Aotw - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal drilling machine: Yes - Horizontal drilling spindles [pcs.]: 10 - Vertical drilling machine: Yes - Software: Biesse works - Saw unit available: Yes - Safety device: - Spindle speed control: Variable - Voltage [V]: 400 - Power consumption [A]: 18 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (L x W x H) - Number of transport packages [pcs.]: 2 Financial information VAT: The indicated price is excluding VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items in the industrial sector Glenn Smeets

Stanje: zelo dobro (rabljeno), Maggi Boring System 35 Multi-Spindle Boring Machine Number of spindles: 35 Spindle pitch: 32 mm Distance between first and last spindle: 1088 mm Gsdpfx Asvx Aqdjd Ajtw Maximum drilling depth: 85 mm Spindle speed: 2800 rpm Number of pneumatic clamps: 4 Working pressure: 6–8 bar Air consumption per cycle: 15 l Number of motors: 2 × 1.5 kW Weight: 450 kg CE certificate