IMA ADVANTAGE 310

IMA ADVANTAGE 310

This IMA Advantage 310 edge banding machine was manufactured in 2010. It processes workpieces with a length of 150 mm, a width of 65 mm, and a thickness of up to 60 mm. It is equipped for various materials, including particleboard and MDF panels, with melamine, paper, foil, or veneer edges. The equipment includes a gluing unit, a cutting unit, and a buffing unit, which enhance the finishing quality. Take advantage of this opportunity to purchase the IMA Advantage 310 edge banding machine. Contact us for further information about this machine.

Machine Benefits

Technical Machine Advantages

• Minimum workpiece length: 150 mm
• Minimum workpiece width: 65 mm (with a maximum thickness of 25 mm), 150 mm
• Workpiece thickness: min. 8 mm, 12 mm with profile scrapers; max. 40 mm (mfa 08346), 60 mm (skf)
• Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm
• Edge machining allowance per workpiece edge: 0 - 5 mm
• Workpiece shape: rectangular
• Material: particleboard, MDF
• Surface material: direct coating (melamine resin paper), paper, foil, veneer

Additional Information

Edging Material
Roll material without foil:
Hodpfxjx U U Dto Ab Eefd
Paper edges & plastic edges: 0.3 - 3.0 mm
Veneer edges: 0.5 - 3.0 mm
Max. edge cross-section: 150 - 180 mm²
Prefabricated edge strips:
Strips: 3.0 - 8.0 mm
Max. strip cross-section: 520 mm²
Edge height: Min. 12 mm, max. 65 mm
Max. upper edge overhang: 2 mm
Edge profiles:
Paper edge: Approx. 0.4 mm, 15° chamfer
Plastic edge up to 3.0 mm, depending on radius tool
Milling strips flush up to 8 mm

Machine
Constant workpiece projection from chain track: 35 mm + edge thickness
Max. cut cross-section: 520 mm²
Passage width: Min. 65 mm (with 35 mm projection)
Min. workpiece length in feed direction: 150 mm
Base height (top edge of chain track): 940 mm
Unit side: Left in feed direction
Pneumatic connection: Approx. 7 - 8 bar
Jointing unit 08.379 and air nozzle
2 motors, each 4 kW, 9000 rpm
Gluing unit 283.1513
Glue reservoir 0.8 l, 60 mm high
Suitable for hot-melt or PUR adhesive
With individual roller/strip magazine, roller diameter 800 mm
3 main pressure rollers and 3 auxiliary pressure rollers
Cutting unit 08.415
Pneumatically swiveling to 0° or 8°
2 motors, 12,000 rpm
2 HM cross-cut saw blades
Copy milling unit SKF-L
4 motors, 12,000 rpm
Profile length in feed direction: max. approx. 50 mm
Workpiece thickness: max. 60 mm
Working speed: max. approx. 20 m/min
Distance between 2 workpieces: min. approx. 400 mm
Profile drawknife 08.519
For post-scraping of an upper and lower milled quarter-circle profile
Self-tracing drawknife unit 08.521
For removing hot-melt adhesive residue in the edge area of the top and bottom of workpieces
Buffing unit 08.617-2
Upper and lower motor: 180 W, 1400 rpm
2 polishing wheels 50 x 160 x 19 mm

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.