Stroj za oblaganje robov

IMA ADVANTAGE 310

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Advantage 310 edge banding machine was manufactured in 2010. It processes workpieces with a length of 150 mm, a width of 65 mm, and a thickness of up to 60 mm. It is equipped for various materials, including particleboard and MDF panels, with melamine, paper, foil, or veneer edges. The equipment includes a gluing unit, a cutting unit, and a buffing unit, which enhance the finishing quality. Take advantage of this opportunity to purchase the IMA Advantage 310 edge banding machine. Contact us for further information about this machine. Machine Benefits Technical Machine Advantages • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with a maximum thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scrapers; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Edge machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: particleboard, MDF • Surface material: direct coating (melamine resin paper), paper, foil, veneer Additional Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Prefabricated edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, 15° chamfer Plastic edge up to 3.0 mm, depending on radius tool Milling strips flush up to 8 mm Machine Constant workpiece projection from chain track: 35 mm + edge thickness Max. cut cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Base height (top edge of chain track): 940 mm Unit side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Jointing unit 08.379 and air nozzle 2 motors, each 4 kW, 9000 rpm Gluing unit 283.1513 Glue reservoir 0.8 l, 60 mm high Suitable for hot-melt or PUR adhesive With individual roller/strip magazine, roller diameter 800 mm Dsdpfjx U U Dtsx Agpeup 3 main pressure rollers and 3 auxiliary pressure rollers Cutting unit 08.415 Pneumatically swiveling to 0° or 8° 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy milling unit SKF-L 4 motors, 12,000 rpm Profile length in feed direction: max. approx. 50 mm Workpiece thickness: max. 60 mm Working speed: max. approx. 20 m/min Distance between 2 workpieces: min. approx. 400 mm Profile drawknife 08.519 For post-scraping of an upper and lower milled quarter-circle profile Self-tracing drawknife unit 08.521 For removing hot-melt adhesive residue in the edge area of the top and bottom of workpieces Buffing unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Control: Edge Control with 18.5" touchscreen color display (16:9), swiveling control panel, program memory, motorized pressure beam adjustment, feed via transport chain, feed speed 8-18 m/min, extendable workpiece support, motorized adjustable infeed fence gluing unit 1961, diamond jointing cutters for both climb and conventional milling, automatic adjustment to workpiece height Edge feeder 1903 Pre-cutting up to 3 x 45 mm (material-dependent) Adhesive application system 1905 Multi-System automatic glue height adjustment with sensing nozzle, pressure regulator for cartridge press-on pressure control, use of PUR adhesives possible, Pressure section 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable, Multifunctional unit 1824 MOT 4 with multifunction cutter for radii 1,2,3 mm Corner rounding unit 1832 corner rounding function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers with pneumatic adjustment (separate for top and bottom) Chip collection box for radius scraper, Surface scraper 1964 for cleaning off glue residue for a clean glue joint Dedpfx Agsv Sv Enepjup with extraction hoods Spray system 1856 for infeed and outfeed zones Buffing unit 1940 for re-polishing and edge finishing ----- Technical Data ----- Edge thickness for coil material: 3 mm, Edge thickness for strip material: 8 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner rounding: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Workpiece support clearance: 470 mm, Support plate diameter for edge material: 800 mm, End trimming blade for coil material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, End trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner rounding power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraping unit: 70 mm, Overall length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours comes from a 2022 snapshot Availability: short term Location: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Morbidelli P 200, letnik 2019, približno 4.500 delovnih ur. Stroj je 100% popolnoma delujoč, lepo ohranjen in čist. Od prve montaže leta 2019 na Norveškem je na svoji izvirni lokaciji. Od novega ga upravlja le en operater. Za vse tehnične podatke preberite priložen PDF dokument (na koncu tega oglasa kliknite 'prenesi ta dokument'). Stroj si je mogoče ogledati po predhodnem dogovoru. Stroj bo odklopljen konec februarja 2026. Lepo ste vabljeni. Rekman Maskin & Service – servis CNC strojev od leta 1986 – Dsdpjwuubfofx Agpoup

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Rezkalna enota za poravnavo, radije, posnetje - 15° Duedpfxjyfn Tnj Agpsp Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, Napetost 400V 3~ 50Hz 7,22kW Krmilna plošča z LCD-prikazovalnikom in tipkovnico Lepljilni agregat z 2 protismerno vrtečima diamantnima rezkama Naprava za zaokroževanje robov za čelne stranice Ročna nastavitev agregata Debelina robnega traku 0,4-5,0 mm (opcijsko 8 mm) Višina obdelovanca 8-60 mm Djdpsyf I T Uefx Agpeup Podajalna hitrost 11 m/min 3 prosti mesti za zaključno obdelavo agregatov Dovajanje robnega traku za rolo in trakasti material Strgalo

Stanje: rabljeno, Leto izdelave: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: Machine equipped with PLC control Feed rate: 12/16 m/min Edge infeed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensor nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Fixed milling unit up to 30 mm 1962 Milling unit MOT 5, multifunctional for flush, radius, and bevel milling 1966 Dusdpfx Agsyamcwjpsp Radius scraper 1927 Corner copying unit 1983 Surface scraper 1964 Buffing unit 1944 Air-blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Edging material thickness max.: 13 mm Weight: 1350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: short-term

Stanje: rabljeno, Leto izdelave: 2002, z enoto za spajanje Skupna dolžina: 6790 mm Globina: 1145 mm Največja višina: 2264 mm Višina delovne podpore: 850 mm Debelina lepilnega traku: 0,4 - 25 mm Največja višina lepilnega traku: 66 mm Najmanjša dolžina lepilnega traku: 200 mm Najmanjša širina obdelovanca: 60 mm Najmanjša dolžina obdelovanca: 140 mm pri 60 mm Največja dolžina obdelovanca: pribl. 6000 mm Najmanjša/največja debelina obdelovanca: 6/60 mm Potreba po zraku: 3000 m³/h Premer odsesovalnega nastavka osnovni stroj: 160 mm Premer odsesovalnega nastavka rezkalne enote: 125 mm Teža: pribl. 2800 kg Lokacija skladišča: pri dobavitelju Duedpfxsypwk Dj Agpjp