CNC obdelovalni center

Gannomat ProTec 0571

New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving: Detailed technical data available in the data sheet for ProTec type 0571. Processing unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y4th drilling axis in Y.

Workpiece sizes and weights:
- Workpiece width (X): min. 60 mm / max. 1,000 mm
- Workpiece thickness (Z): min. 6 mm / max. 60 mm
- Workpiece length (Y): min. 250 mm in throughfeed mode, max. 5,600 mm programmable in the software
- Workpiece weight: max. 75 kg

Milling unit Profit HSK63F with 3-position magazine for automatic tool change, 5.5 kW (S1) motor, 1000-20,000 rpm with frequency converter, clockwise and counterclockwise, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm.

Information:
Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit.

Hodjw Tfzfopfx Ab Esfd
Connected load: 12 kVA
Rated current: 17.5 A
Fuse: 32 A
Voltage: 400 V, 50 Hz, 3-phase (without transformer)
Power network: TN or TT
Pneumatic connection: 7 bar (102 psi)
On machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory side
For the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side
Supply pipe, hose inner diameter min. 12 mm
Compressed air requirement, continuous air consumption: approx. 230 L/min (about 3.8 L/s) (compressed air)

Extraction connection: 3x extraction nozzles, dia. 80 mm
Extraction speed: 30 m/sec - measured at extraction nozzle
Extraction requirement: min. approx. 2,500 m3/h

Machine weight: approx. 1,650 kg (with options!)

Machine footprint:
In general, a ProTec can be fixed to the floor. Concrete flooring (or foundation) is required (at least under the 4 machine corners/feet).

Equipment:
- Protec 571 Profit HSK63F with 3-position magazine
- Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm
- Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm
- Auxiliary stop 600 mm with integrated rollers for roller tables
- Additional safety device via lamella curtain
- Requirement for horizontal milling for Lamello P-System (without tools for Lamello P-System)

Drill bit set for Protec shank ø 10 mm with clamping surface (JSO):
1 HW pyramid point drill bit 5x70mm (NL 35mm), LH #30566-5-05035-L
3 HW dowel drill bit 5x70mm (NL 35mm), RH #30540-5-05035-R
4 HW dowel drill bit 5x70mm (NL 35mm), LH #30540-5-05035-L
3 HW dowel drill bit 8x70mm (NL 35mm), RH #30540-5-08035-R
5 HW dowel drill bit 8x70mm (NL 35mm), LH #30540-5-08035-L
2 HW dowel drill bit 10x70mm (NL 35mm), LH #30540-5-10035-L
1 HW cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L
1 HW cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R
1 HW cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R
1 HW grooving cutter ø 125/30 mm, groove width (SB) 4.0 mm, Z=12, LH, Leitz - Only for chipboard and MDF, solid wood on request and subject to agreement

Tool holder HSK63 F 3.00 pcs for collet 462E/OZ25
Collet 462E/OZ25 for shank 25 mm, 3.00 pcs
Carbide insert shank cutter Z1+1, 1.00 pcs HW with insert drill tip ø20, S25, LH 120, L2/L3 58 mm
Grooving cutter HW-insert Z1, 1.00 pcs with insert drill tip, D ø 10 mm, d ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately)
Decorative grooving cutter HW-insert Z1, 1.00 pcs

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.