Vakuumskega dvigala z steber Pomolni žerjav

Barbaric Uniwood B3 90 - 250 + SSK 250

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Schiavo Hydro 3000.6 Vertical glass washing machine with pre-wash zone, main washing zone, and drying zone. Wet zone is largely made of stainless steel and moisture-resistant materials. 150 mm one-piece washing brushes with stainless steel core. Including water tanks for water treatment. Including fan for glass drying. Kdodpfewd N Urox Ai Nop Outfeed zone with inspection lamps. Processing dimensions: Max. glass height: 3,000 mm Glass thickness: 3–22 mm Brushes: 6 units Connected load: 22 kW

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Kodpfxepiarne Ai Nodp Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Kodpfxeu R Szaj Ai Nsdp Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: rabljeno, Tenon cutter / Dowel saw LOSER model AA220 - USED Kdjdeqpdkcjpfx Ai Nsp - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6–18 mm.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Kdjdpfxedqzcxj Ai Nep Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: skoraj kot novo (rabljeno), Delovna širina 1350 mm Ksdpfxsuuitgj Ai Nodp Stroj je v odličnem, kot novem stanju, kot je razvidno s slik.

Stanje: rabljeno, Rezne vreteno 1 kos. Število rezalnih glav 4 kos. Premer vretena 50 mm Weinig Unicontrol 6, obdelovalni stroj za okna ----- Za prodajo po naročilu stranke Opis proizvajalca: Za proizvodnjo posameznih delov, elementov in majhnih serij. Kedex Tu N Hopfx Ai Nedp Razporeditev vreten: Ena žaga za obrezovanje, eno vreteno za izdelavo utorov in profilov, eno desno vreteno za profiliranje, eno vreteno za utore in profile ter profilno vreteno, primerno za namestitev več orodij eno nad drugim, s pnevmatičnim premikanjem vretena. Miza za utore z motoriziranim premikanjem mize in avtomatskim prenosom na neprekinjen, brez verige, gumijast valjčni sistem za podajanje profilne enote, nastavitev višine podajanja ročno. Napetost obdelovanca prek 2 pnevmatičnih vpenjalnih valjev. Dolžinski opora z lestvico in povečevalnim steklom za zunanje mere okvirjev oz. kril. Upravljanje položajev orodij (obdelava v vzdolžni in prečni smeri) s pomočjo izbirnega stikala na upravljalni plošči. Tehnični podatki ----- Žaga za obrezovanje ----- Število orodij: 1 Hitrost vretena: 2.800 rpm Premer vretena: 40 mm Premer orodja maks.: 350 mm Motor: 3 kW Vreteno za utore in profile ----- Število orodij: 3/4 kos. za debelino lesa IV 68 - IV 92 Hitrost vretena 3.500 rpm Premer vretena 50 mm Dolžina vpenjanja orodja 320 mm Premer orodja maks. 320 mm Motor 11 kW Profilno vreteno ----- Število orodij: 3/4 kos. za debelino lesa IV 68 - IV 92 Hitrost vretena 6.000 rpm Premer vretena 50 mm Dolžina vpenjanja orodja 320 mm Premer orodja maks. 232 mm Motor 11 kW Posebna oprema: Sinhrono vreteno ----- pnevmatično krmiljeno za naprej-nazaj, za obdelavo robov oken, okvirjev in vrat brez poškodb. Premer vretena 50 mm, 4 kW Dolžina vpenjanja orodja 120 mm, premer orodja v mirovanju 112-140 mm, premer orodja maks. 232 mm, hitrost vretena 6000 rpm Povečanje moči motorja za sinhrono vreteno z 4 kW na 7,5 kW Upravljanje z zaslonom za 99 vrst oken, 1 vrsta lahko vsebuje do 8 različnih delov z 2 končnimi profili in 2 vzdolžnimi profili, možnosti izdelave: posamezni deli, dvojni deli, po okvirjih, po serijah, obdelava robov, vnos podatkov prek tipkovnice z integriranim vodilom za uporabnika in diagnostiko napak. 1 vreteno za žleb z vrha ----- Moč motorja: 2,2 kW Hitrost: 6000 rpm Premer vretena: 40 mm, s pero 10 x 4 mm Dolžina vpenjanja: 13 mm Dolžina vpenjalnega prostora: 40 mm Aksialni hod, 2 nastavitvi Radialni hod, 2 nastavitvi maks. premer orodja 130 mm Povečanje moči motorja vretena za žleb z 2,2 na 3 kW 1 enota za obdelavo robov za vgradnjo, desna: ----- Za izdelavo utora za okovje med obdelavo robov oz. za izdelavo utora v vzdolžnem profilu. Pnevmatični horizontalni premik z izbirnim stikalom na upravljalni plošči. Moč motorja: 2,2 kW Hitrost: 6000 rpm Premer vretena: 40 mm Višina vpenjanja: 125 mm Premer krožne poti orodja: min. 140 mm, maks. 180 mm Osnovna nastavitev pod ravnino mize: 10 mm Enota za obdelavo robov v posebni izvedbi: Dolžina vpenjanja 150 mm Aksialni hod 80 mm, 3 nastavitve 3 orodja Radialni hod, 2 nastavitvi Povečanje moči motorja za vreteno za obdelavo robov z 2,2 na 3 kW Vreteno za obdelavo robov za premer orodja 230 mm v mizi in nad njo Električna nastavitev višine podajanja z izbirnim stikalom na upravljalni plošči na 2 mere lesa, vključno s pnevmatičnim sistemom...

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Kodpofxpbmofx Ai Nsdp

Stanje: novo, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Kdedpsdmi Nijfx Ai Nsp Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: Frequenzgesteuert Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtmotorleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querantriebsmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Heben-/Senkmotor: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Tischhöhenverstellung: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg

Stanje: rabljeno, številka stroja/vozila: 007135, Maks. širina plošče: 800 mm Maks. dolžina plošče: 2500 mm Kdedpfx Aiot Hmppo Njp Povrat delov za robno lepilko: levo