Kunzmann Ba 600 nakup rabljenega (66)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 2.542 h, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill travel: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Kfjdpew D D Sfsfx Ah Asa Motor power: 5.5 kW Weight: 1,920 kg Space requirements: approx. 2,000 x 2,000 x 2,100 mm Total power requirement: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety cabin – LED machine light

Stanje: dober (rabljeno), Leto izdelave: 1980, For sale: 1 unit milling machine Manufacturer: Kunzmann Model: HF6/2V Year of manufacture: 1980 Kfodpfxoq Rfqbj Ah Aea Spindle speeds: see nameplate Table size: 700 x 170 mm The machine can be inspected at our warehouse in 09599 Freiberg by appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 600 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, skupna višina: 2.000 mm, skupna širina: 2.000 mm, skupna dolžina: 2.000 mm, širina mize: 425 mm, dolžina mize: 800 mm, skupna masa: 2.000 kg, teža obdelovanca (maks.): 250 kg, Travel paths X/Y/Z: 600/400/400 mm, spindle speeds: 1 - 4500 rpm, motor power: 7.5 kW, spindle taper: SK 40, control unit: Heidenhain TNC 124, table size: 800x425 mm, hydraulic tool clamping, edge finder, swivelling milling head, coolant system, tool holders, electronic handwheel, operating manual. Kfsdsw Ay N Djpfx Ah Aoa

Stanje: rabljeno, z-axis travel: 380 mm y-axis travel: 400 mm x-axis travel: 500 mm Tool holder: SK 40 Swiveling vertical head: 90° to both sides Table size (LxW): 700x425 mm Space required approx.: 2x2x2 m Quill stroke: 60 mm T-slot width: 14H7 mm T-slot spacing: 63 mm Machine weight approx.: 2 t Total power requirement: 10 kW Kjdpfx Aocxxmqsh Ajfa Driven tool speed range: 5 - 3000 rpm Maximum load: 250 kg Number of T-slots: 6 Spindle drive power: 5.5 kW

Stanje: rabljeno, Leto izdelave: 1996, x-axis travel: 400 mm y-axis travel: 350 mm z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,000 rpm Feed rates: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 CNC control: TNC 124 Motor power: 5.5 kW Weight: 1,800 kg Required space: approx. 2,000 x 1,000 x 2,100 mm Original price: ~ EUR 55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN TNC 124 CNC control - Swiveling control panel, positioned on the right - Hydraulic tool changer (DIN 69872) - Vertical milling head – SK 40 - X-axis feed: 0 – 2,000 mm/min - Y-axis feed: 0 – 2,000 mm/min - Z-axis feed: 0 – 2,000 mm/min - Centralized electric lubrication Kfjdpfjw U U Sijx Ah Aoa - Coolant system - Chip tray - Operating manual for both machine and control Special accessories included: - Hydraulic machine vice - Multiple tool holders - HEIDENHAIN HR 410 electronic handwheel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant! Technical Specifications: - Year of manufacture: 2008, Machine No. 348084 - Rigid universal angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed on 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min, Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal spindle: SK40 taper - Hydraulic clamping system - Weight: approx. 1,800 kg - Space requirement: approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Features and Accessories: - Heidenhain TNC 320 CNC control Kfsdpfx Asv Dut Ioh Aja - Hydraulic clamping vertical and horizontal - Centralized automatic lubrication system - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. The machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated by the centralized lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Kunzmann under power on site.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 400 mm, pomik osi Y: 320 mm, pomik po osi Z: 400 mm, hitrost pomika os X: 2.000 m/min, hitrost podajanja osi Y: 2.000 m/min, hitrost podajanja os Z: 2.000 m/min, poteza s peresom: 60 mm, hitro pomikanje X-os: 5.000 m/min, hitri pomik os Y: 5.000 m/min, hitri pomik na osi Z: 4.000 m/min, skupna višina: 2.000 mm, skupna širina: 2.000 mm, skupna dolžina: 2.000 mm, širina mize: 650 mm, dolžina mize: 350 mm, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 1 obr/min, obremenitev mize: 250 kg, skupna masa: 2.000 kg, Oprema: dokumentacija / priročnik, Stanje stroja: Stroj je trenutno še vedno v uporabi in je v delujočem stanju. Pozitivno izpostavljeno: Kfsdpfx Ajw Icwmoh Aja Enostavno upravljanje preko krmilnika TNC124 Nizko vzdrževanje, robustna konstrukcija stroja Možno ročno vrtanje (samo linearna obdelava) Omejitve: Omejena geometrija stroja (malenkost nenatančno) Relativno visoka poraba olja Dodatne informacije: Popolna dokumentacija o stroju je na voljo. Motor 5 kW, vreteno SK 40, krmilnik Heidenhain TNC124, Vertikalna in horizontalna pinola - SK40, centralno mazanje, ročna kolesa, hladilna naprava.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.000 obr/min, poteza s peresom: 60 mm, širina mize: 650 mm, dolžina mize: 350 mm, skupna masa: 1.800 kg, Oprema: dokumentacija / priročnik, Dear Sir or Madam, For sale is a Kunzmann WF4/3 CNC milling machine, year of construction 2004. The machine can be operated both manually and under CNC control. The Heidenhain TNC124 controller is ideal for learning basic CNC programming and remains a popular choice for production applications as well as for machining special components. The quickly retractable vertical milling head turns the Kunzmann into a true all-rounder with a compact footprint. This machine is available from us workshop-tested, partially refurbished, or fully overhauled—each variant available with or without an enclosure. Kfodpfxeu H U Hkj Ah Aoa Availability: on request Year of manufacture: 2004 Control: Heidenhain TNC124 Table: fixed angular table 650x350mm Travels: X400mm / Y350mm / Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1–4000 rpm Feed rate: 0–2000 mm/min Tool holder: SK40 Equipment and accessories: coolant system, central lubrication, instruction manual, documentation, machine feet, electronic handwheel, etc. Our service promise to you: - We are a certified master craftsman business specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced prior to delivery - Upon request, we can completely or partially overhaul the selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install further accessories such as safety devices - We are happy to arrange shipping and/or on-site installation for you

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in operation; test runs possible during inspection; Good technical condition; Folding machine from the renowned German manufacturer GUK, equipped with a high-pile feeder (sheet separation by suction roller from the top) FL2-50, 2 buckle folding units, both with maximum working width of 50 cm, and stream delivery. GUK folding machine, model FA 50/6-6 FL2-50 – feed width up to 50 cm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Kfsdporx S Iwefx Ah Aoa Feeder speed (high-pile feeder): 40 - 180 m/min Maximum output capacity: up to 27,000 A4 sheets/hour Electrical supply: 400 V/50 Hz Machine equipment: High-pile feeder FL2-50; Multifunctional counter for programming machine operation. Possibility to fold sheets in batches (groups) of preset quantity, with stepless adjustment of intervals between batches. 1st folding unit FA 50/6, 6 folding pockets; Soundproof cover for 1st folding unit, top. 2nd folding unit FA 50/6, 6 folding pockets; Soundproof cover for 2nd folding unit, top. Stream delivery S 520; can be positioned after either the 1st or 2nd folding unit.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: nepreverjeno, številka stroja/vozila: 370791, dolžina podajanja os X: 800 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 4.500 obr/min, širina mize: 420 mm, dolžina mize: 800 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period from 28.07.2025 to 31.07.2025. Ksdpowvi T Eefx Ah Aofa TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Feed rate X-axis: 2,000 mm/min Feed rate Y-axis: 2,000 mm/min Feed rate Z-axis: 2,000 mm/min Rapid traverse X-axis: 5,000 mm/min Rapid traverse Y-axis: 5,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Spindle Spindle speed: 1 - 4,500 rpm Tool holder: 40 mm Speed range 1: 1 - 1,125 rpm Speed range 2: 1,125 - 4,500 rpm Table Table width: 420 mm Table length: 800 mm MACHINE DETAILS Overall height: 2,000 mm Overall width: 1,750 mm Overall length: 1,750 mm Total weight: 1,800 kg Machine weight: 2,025 kg Input frequency: 50 Hz Operating voltage: 400 V Connected load: 13 kVA EQUIPMENT - The machine vice visible on the table surface is not included in the scope of delivery.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Manufacturer: Kunzmann Model: WF5/3 Year of manufacture: 1990 X-axis travel: 500 mm Y-axis travel: 360 mm Z-axis travel: 420 mm Clamping surface: 700 x 350 mm Tool holder: SK40 Spindle bore: 22 mm Ksdoffyfrspfx Ah Aefa Quill stroke: 60 mm Dimensions (approx.): W 1.50 x D 2.40 x H 1.90 m Weight (approx.): 1.6 t All information without guarantee. The machine is in very good condition. A demonstration is possible at any time in our showroom.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF7/3 with Heidenhain TNC 310 Contour Control – Excellent Condition, CE Compliant!! Technical Specifications: >> Year of manufacture: 2004 Machine No.: 370506 >> Milling Table Clamping Surface: 800 x 425 mm T-slots: 6 Kfjdpowpkchsfx Ah Aja T-slot Width: 14 H 7 T-slot Pitch: 63 mm Max. Table Load: 300 kg >> Spindle Speeds: up to 4,500 rpm >> Feed Range: up to 2,000 mm/min Rapid Traverse: up to 5,000 mm/min >> Travel X/Y/Z: 600 / 400 / 400 mm >> Vertical and Horizontal Quill – SK40 >> Hydraulic Drawbar System >> Weight: approx. 2,000 kg >> Dimensions (approx.): 2 x 2 x 2 m >> Main Drive Motor: 5.5 kW Equipment and Accessories: >> Heidenhain TNC 310 Contour Control >> Hydraulic Clamping – Vertical and Horizontal >> Automatic Central Lubrication >> Spindle Brake >> Electronic Handwheel >> Heidenhain Touch Probe >> Technical Documentation, Spare Parts Manuals, Operating Instructions >> Full Protective Enclosure / Safety Cabin >> Coolant System About the Machine: Offered here is a Kunzmann WF7/3 universal tool milling machine equipped with a Heidenhain TNC 310 contour control. This universal milling machine is in very good condition. The control system is very user-friendly. The machine is equipped with hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal setup is particularly straightforward due to the tilting vertical head. Guides are lubricated regularly thanks to the central lubrication system. The Kunzmann has been mechanically and electrically tested on our premises. Take the opportunity to view and test the Kunzmann under power at our facility.

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, CNC Milling Machine KUNZMANN - WF7/3 X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Kfodpfxjwq Ndge Ah Aoa Table length: 650 mm Table width: 400 mm Max. table load: 250 kg Quill stroke: 40 mm Length: 2800 mm Width: 2400 mm Height: 2100 mm Weight: 2000 kg

Stanje: dober (rabljeno), potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, montažni premer: 40 mm, skupna višina: 2.000 mm, skupna širina: 2.000 mm, skupna dolžina: 2.000 mm, širina mize: 700 mm, dolžina mize: 425 mm, moč: 5 kW (6,80 KM), X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Kjdpforxry Tox Ah Aefa Spindle taper: SK 40 Spindle speeds: 1 - 4000 rpm Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system - Operating manual Country of origin: Germany Motor power: 5 kW Machine dimensions (LxWxH): 200 x 200 x 200 cm Machine weight: 2000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE-Compliant! Technical Data: >> Year of manufacture: 2006 Machine no.: 348013 >> Fixed angular table >> Infinitely variable spindle speed up to 4,500 rpm >> Stepless feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 15 kVA Equipment and Accessories: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual, programming examples Kfedpfowrhxfjx Ah Aea >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Furthermore, the machine features hydraulic clamping in both vertical and horizontal positions. Converting from vertical to horizontal operation is straightforward due to the swing-away design of the vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested at our premises. Take advantage of the opportunity to inspect and test the Kunzmann under power at our location.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF 410M with Heidenhain TNC 128 Control - LIKE NEW CONDITION, CE Compliant! Technical Data: - Year of manufacture: 2022, Machine No. 411555 - Milling table clamping surface: 650 x 375 mm T-slots: 5 Slot width: 14 H7 Slot spacing: 63 mm Max. table load: 250 kg - Speed range: 1–4500 rpm - Feed rate X/Y/Z axis (stepless): up to max. 5/5/4 m/min - Travel X/Y/Z: 410/350/450 mm - Vertical and horizontal quill – SK40 - Hydraulic pull-in system - Weight approx. 2000 kg - Dimensions approx.: 2 x 2 x 2 m - Connected load: 13 kVA Accessories and Equipment: - Heidenhain TNC 128 control - Heidenhain HR 510FS electronic handwheel - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, operation manual - Machine lamp - Minimum quantity lubrication system - Steady rest - Digital display for quill stroke - Oriented spindle stop (thread cutting without compensating chuck) - Chip guard enclosure - Edge finder KT 130 - Coolant system - Rotary table 200 mm - Dividing attachment with 125 mm three- and four-jaw chuck - Hydraulic vice 125 mm About the machine: Kodpjv Rppkjfx Ah Ajfa For sale is a Kunzmann WF 410M universal tool milling machine, year 2022, in like-new condition, equipped with a Heidenhain TNC 128 control. The TNC 128 offers numerous dialog-guided cycles with graphical simulation for rapid and simple data entry, e.g., various drilling cycles, thread cutting, bolt circles, linear hole patterns, rectangular pockets, rectangular studs, and face milling. The control is very user-friendly. Additionally, the machine offers hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very straightforward, thanks to the tiltable vertical head. The guides are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically checked by us. Take the opportunity to inspect and test the Kunzmann under power on site.