Rezkalni stroj

Kunzmann WF4/3

Stanje: dober (rabljeno), Horizontal milling attachment – counter holder for KUNZMANN milling machines, WF series. This was an accessory for a KUNZMANN WF 4/3 TNC 124. There are 2 units available. The current new price from Kunzmann is over €2,000 plus VAT. With a suitable adapter plate, it should also fit other machines such as EMCO, MIKRON, DECKEL, FPS, etc. Rodpovr Stusfx Agtot Price quoted net ex-stock.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Rodpothd Shofx Agtst Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 2.542 h, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h Redpfx Ajyub H Tsgtst X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill travel: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirements: approx. 2,000 x 2,000 x 2,100 mm Total power requirement: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety cabin – LED machine light

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, največja hitrost vretena: 4.000 obr/min, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 124, število osi: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a SK40 spindle taper. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse speeds of up to 1,000 mm/min on all axes. Take the opportunity to purchase this KUNZMANN universal machining center WF 4/3. Contact us for further details on this machine. • Swiveling head: ±90° • Spindle and drives (INDRAMAT): • Main spindle motor: 2AD104C-B050A1-CS06-A2N1 • Spindle taper: SK40 • Spindle bore: 22 mm • Quill diameter: 90 mm • Quill stroke: 60 mm • Axis drives: • X / Y / Z motor type: MKD071B-061-GG1-KN • Speed & feed: • Spindle speeds: • Range I: 0–1,000 rpm (stepped) • Range II: 1,001–4,000 rpm (stepless) • Rapid traverse: • X-axis: up to 1,000 mm/min • Y-axis: up to 1,000 mm/min • Z-axis: up to 1,000 mm/min • Feed force (X/Y/Z): approx. 4 kN • Electrical & control (INDRAMAT): • Power supply modules: • Line filter: NFD03.1-480-030 • Capacitor module: CZM01.3-02-07 • Controllers: Redpfjya D Svjx Agtot • Spindle controller: DKC11.3-100-7-FW • Axis controller: DKC01.3-040-7-FW • Firmware versions: • Spindle: ESM 2.1-SMT-02V • Axes: ESM 2.1-SMT-02V Technical Specification Taper Size SK40

Stanje: rabljeno, Details on request. Rsdpjdbmyzjfx Agtet

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, For sale is a milling machine from Kunzmann, model WF 4/3. The machine is fully operational and ready for immediate use. Technical specifications: Control: Heidenhain TNC 124 Year of manufacture: 1996 Working area longitudinal X-axis: 400 mm Rjdpfevftrxsx Agtst Transverse Y-axis: 350 mm Vertical Z-axis: 400 mm Fixed angle table, clamping surface: 650 x 350 mm Max. table load: 250 kg Main drive AC motor: 5.5 kW Feed drives: AC individual drives Infinitely variable feed: 0 - 2,000 mm/min Tool holder: SK 40 Spindle speed range: 1–4000 rpm Quill, vertical: stroke 60 mm Swivelling range, vertical milling head: ± 90° Tool clamping: hydraulic Direct linear measuring systems, coded distance, resolution 0.001 mm Max. position deviation (Pmax) according to VDI/DGQ 3441: 0.015 mm Operating voltage: 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg Transport and loading can be organised Europe-wide upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be glad to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or ways to contact us, please visit our website.

Stanje: rabljeno, Leto izdelave: 1995, - Heidenhain digital position display - Infinitely variable feed on all axes - Rapid traverse on all axes - Hydraulic tool clamping system - Rigid angular table - Electrical central lubrication system - Coolant system - Workplace lighting - Machine feet - Year of manufacture: 1995 Specifications Milling Table: - Clamping surface: 650 x 350 mm - T-slots: 5 - T-slot width: 14 H7 mm - T-slot spacing: 63 mm - Max. load: 250 kg Working Area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Distances: - Table top to horizontal spindle centre: 140 – 540 mm - Table top to bottom edge of vertical head max.: 430 mm Milling Spindle: - Tool holder: SK40 - Speeds vertical/horizontal: 40 – 2550 rpm - Gear stages: 2 - Quill stroke vertical: 60 mm - Vertical head swivel range (both sides): 90° Feeds: - Longitudinal & cross feed: 0 – 1000 mm/min - Longitudinal & cross rapid traverse: 4000 mm/min - Vertical feed: 0 – 1000 mm/min - Vertical rapid traverse: 3000 mm/min General Data: - Drive power: 3 kW / 1410 rpm Rodpevhfqrefx Agtst - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control – Excellent Condition, CE-Compliant! Technical Specifications: - Year of manufacture: 2015 Machine No. 610398 - Clamping surface of milling table: 800 x 425 mm - Number of T-slots: 6 - T-slot width: 14 H7 - T-slot spacing: 63 mm - Max. load: 300 kg - Spindle speed range: 1–4500 rpm - Stepless feed rate: 0–2000 mm/min - Rapid traverse, X and Y axes: 5000 mm/min - Z axis: 4000 mm/min Rsdpfx Aswz Eu Nsgtjt - Travel distances X/Y/Z: 600/400/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (LxWxH): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Output at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: For sale is a Kunzmann WF 600M tool milling machine equipped with a Heidenhain TNC 128 control system. The TNC 128 features numerous dialog-guided cycles with graphic simulation for fast and easy data input, e.g. various drilling cycles, thread cutting, bolt circles, linear drilling patterns, rectangular pockets, rectangular studs, and surface milling. This universal milling machine is in nearly new condition. The control is very user-friendly. The machine is equipped with hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple via the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested on our premises. Take the opportunity to inspect and test the Kunzmann on site under power.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Redpfx Agjhikrrjtot Year of manufacture: 2008 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Machine no.: 344349 Warranty: 6 months Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Centralized lubrication, electric - Coolant system - Chip tray - Operating manual - Used, sold as seen -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant! Technical Specifications: - Year of manufacture: 2008, Machine No. 348084 - Rigid universal angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed on 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min, Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal spindle: SK40 taper - Hydraulic clamping system - Weight: approx. 1,800 kg - Space requirement: approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Features and Accessories: Redpfxjv Dut Io Agtjt - Heidenhain TNC 320 CNC control - Hydraulic clamping vertical and horizontal - Centralized automatic lubrication system - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. The machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated by the centralized lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Kunzmann under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1990, From company closure: Mössner Rekord SSF 520 Year of manufacture: 1990 Serial no.: 27968 Infinitely variable speed from 15 to 2350 m/min Rjdpfxjviym Ds Agtst 4 gearbox speeds Bandsaw welding unit BSSO25 Air pump Work light Grinding wheel Table tiltable left 15° - right 45° Table size: 790 x 740 mm Vertical clearance: 390 mm / Horizontal clearance: 500 mm Machine height: 2100 mm Weight: approx. 700 kg

Stanje: rabljeno, Leto izdelave: 1996, x-axis travel: 400 mm y-axis travel: 350 mm z-axis travel: 400 mm Tool holder: SK 40 Rsdpfxow U U Sij Agtst Spindle speeds: 1.0 – 4,000 rpm Feed rates: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 CNC control: TNC 124 Motor power: 5.5 kW Weight: 1,800 kg Required space: approx. 2,000 x 1,000 x 2,100 mm Original price: ~ EUR 55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN TNC 124 CNC control - Swiveling control panel, positioned on the right - Hydraulic tool changer (DIN 69872) - Vertical milling head – SK 40 - X-axis feed: 0 – 2,000 mm/min - Y-axis feed: 0 – 2,000 mm/min - Z-axis feed: 0 – 2,000 mm/min - Centralized electric lubrication - Coolant system - Chip tray - Operating manual for both machine and control Special accessories included: - Hydraulic machine vice - Multiple tool holders - HEIDENHAIN HR 410 electronic handwheel

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red RAL7016 anthracite grey Machine no.: 344025 with warranty Geometric inspection with test protocol Accessories: - HEIDENHAIN TNC 124 path control system - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probing system • For detecting the workpiece position • For determining workpiece reference points • For measuring finished parts • Incl. Weldon chuck SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) • Swivels on 3 axes • Rotatable 360° (displayed digitally in the control as a 4th axis) • Tiltable +/- 30° • Tilt range towards the machine 45° • Tilt range away from the machine 15° • Centering bore Ø 32 mm • Table load capacity 150 kg - Vertical milling head SK 40 • With hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Splash guard cabin, movable, electrically secured - Operating instructions Used as seen The machine complies technically with the standards of its year of manufacture. Rsdjm Nbwtepfx Agtet

Leto izdelave: 1978, stanje: rabljeno, številka stroja/vozila: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Table size: AT-F 205 x 345 mm Rodpfx Agsbx Elijtet Space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (approx. 1/3 loss of power at 380 V), 0.6 kW accordingly

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3, Heidenhain Digital Readout, Year 1994 – Excellent Condition! Technical Specifications: • Year of manufacture: 1994 • Rigid angular table • Spindle speed range: 40 – 2550 rpm Rodpfxovyr R Nj Agtot • Infinitely variable feed in X, Y, Z axes: 0 – 2000 mm/min • Travels (X/Y/Z): 400/320/400 mm • Rapid traverse in all axes • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic drawbar system • Weight: approx. 1500 kg Equipment and Accessories: • 3-axis Heidenhain digital readout • Centralized electric lubrication • Machine leveling feet • Handwheels • Coolant unit About the Machine: For sale is a Kunzmann WF4/3 universal milling machine in excellent condition. The machine comes from a government entity and was only lightly used. Switching from vertical to horizontal milling is quick and easy by simply swinging the vertical head aside. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our facility.