Kunzmann nakup rabljenega (67)

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, For sale is a milling machine from Kunzmann, model WF 4/3. The machine is fully operational and ready for immediate use. Technical specifications: Control: Heidenhain TNC 124 Year of manufacture: 1996 Working area longitudinal X-axis: 400 mm Transverse Y-axis: 350 mm Vertical Z-axis: 400 mm Fixed angle table, clamping surface: 650 x 350 mm Max. table load: 250 kg Main drive AC motor: 5.5 kW Feed drives: AC individual drives Infinitely variable feed: 0 - 2,000 mm/min Tool holder: SK 40 Spindle speed range: 1–4000 rpm Quill, vertical: stroke 60 mm Swivelling range, vertical milling head: ± 90° Tool clamping: hydraulic Direct linear measuring systems, coded distance, resolution 0.001 mm Max. position deviation (Pmax) according to VDI/DGQ 3441: 0.015 mm Operating voltage: 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg Transport and loading can be organised Europe-wide upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be glad to assist you. Trade-in or exchange possible! Laodpfovftrxox Ah Aek Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or ways to contact us, please visit our website.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2004, Universal Tool Milling Machine Manufacturer: KUNZMANN Model: WF 610 MC Year of manufacture: 2017 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red RAL7016 anthracite grey Ljdsx H Nmaspfx Ah Aeak Machine No.: 610648 Machine hours: approx. 2,100 h machine on approx. 7,200 h control system on approx. 500 h program run approx. 360 h axes approx. 450 h spindle S1 approx. 5 h hydraulics with warranty Geometric inspection with test protocol Equipment: - CNC control HEIDENHAIN TNC 620 - Electronic handwheel HEIDENHAIN HR 510 FS, new - Oriented spindle stop, vertical and horizontal including threading cycle without compensating chuck - Probe preparation kit for TS 260 with receiver taper at control panel and spindle lock - Heidenhain touch probe TS 260 - Fixed table 800 x 425 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Splash guard cabin, movable, electrically interlocked - Left-hand side window of splash guard cabin removable, electrically interlocked - Control panel mounted on base - Operating manual Used as seen The machine is technically in accordance with the state of the art as of the original year of manufacture.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Kunzmann WF 410 M rezkalni stroj (2022) Proizvajalec: Kunzmann Tip: WF 410 M rezkalni stroj Leto izdelave: 2022 Stanje: rabljeno, zelo dobro, kot novo Ure vklopa: 2355 h Spindle ure: 253 h X-hod: 410 mm Y-hod: 350 mm Z-hod: 450 mm Glavni pogon (100 %/25 % ED): 6,8/13,0 kW Laodex Ni U Nepfx Ah Ajk Območje obratov: 1-4500 obr/min Orodno držalo: SK 40 DIN ISO 7388-1 Področje podajanja do 5 m/min Teža cca 2.000 kg Kotna miza, toga Vpenjalna površina 800 x 425 mm T-utor 6 x 14 H 7 Maks. obremenitev mize 300 kg Hladilni sistem Strojna luč Horizontalno rezkalno vreteno z menjalnikom Obseg dobave: – El. ročni kolešček HR 510 – Originalna dokumentacija Brez primeža.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Krmilnik Heidenhain TNC530, IKZ 40 bar, Transporter za ostružke, Orodno držalo SK40 – orodna zaloga za 32 orodij, Vrtljaji vretena 8.000 U/min, Lodjx Emrwspfx Ah Ajak Primeži niso vključeni.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very good CONDITION CE-compliant! Technical Data: Lsdpjx Elxpjfx Ah Aeak >> Year of manufacture: 2003 Machine No.: 344174 >> Fixed angle table >> Infinitely variable spindle speed up to 4,000 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Travel (X/Y/Z): 400/320/400 mm >> Table area: 650 x 350 mm >> Table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Required floor space approx. 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Features: >> Heidenhain TNC 124 control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control unit manual, and programming examples >> Handwheels >> Coolant system >> Heidenhain electronic handwheel About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control unit. This universal milling machine is in very good condition. It comes from a facility where it was used only minimally for training purposes. The control unit is very easy to operate. The machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal milling is very straightforward due to the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power on site. The machine is available immediately.

Leto izdelave: 2002, Stanje: generalkompletno obnovljen (rabljeno),

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Splošni podatki Širina: 2000 mm Globina: 2000 mm Višina: 2000 mm Premiki Premik po osi X: 400 mm Premik po osi Y: 320 mm Ledpfx Ajx D Er Roh Asak Premik po osi Z: 400 mm Orodja Tip držala orodja: SK40 Univerzalni rezkalni stroj KUNZMANN WF4/3 je bil izdelan leta 1998. Ima vpenjalno površino 650 x 350 mm, maksimalno nosilnost 250 kg in držalo orodja SK40. Hitrost se giblje od 40 do 2500 vrt/min, z hodom pinole 60 mm. Stroj vključuje krmilno omaro in tehta približno 1300 kg. Idealen je za natančne rezkalne aplikacije. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: dober (rabljeno), Leto izdelave: 2001, Heidenhain TNC 310 CNC control Electronic handwheel Coolant system Technical Specifications: X-axis travel (longitudinal): 600 mm Y-axis travel (cross): 400 mm Z-axis travel (vertical): 400 mm Spindle taper: SK 40 Spindle speed range: 60–5000 rpm Feed rate: 0–2000 mm/min Rapid traverse x/y: 5 m/min Laodpfx Ahoit Tr Tj Ajk Rapid traverse z: 4 m/min Total drive capacity: 7 kW Approximate weight: 2000 kg Technical data, accessories, and description of the machine are not binding.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 410 MC univerzalni rezkalni stroj (2021) Proizvajalec: Kunzmann Tip: WF 410 MC rezkalni stroj Leto izdelave: 2021 Stanje: zelo dobro, kot novo, malo rabljen Krmiljenje HEIDENHAIN TNC 620 X-hod: 410 mm Y-hod: 350 mm Z-hod: 450 mm Glavni pogon (100%/25% ED): 6,8/13,0 kW Območje vrtljajev: 1-5.000 min⁻¹ Vpenjalo orodij: SK 40 DIN ISO 7388-1 Območje pomika: do 5 m/min Teža pribl. 2.000 kg Kotna miza, fiksna Vpenjalna površina: 800 x 425 mm T-utori: 6 x 14 H 7 Laodpfx Asx Ivypjh Aok Obremenitev mize maks. 300 kg Hladilna naprava Strojna luč Horizontalna rezkalna vretena z menjalnikom Obseg dobave: – Elektronski ročni kolešček HR 510 – Originalna dokumentacija – Vključno z merilno napravo za orodje – Vključno z 20 vpenjalnimi držali za orodje

Leto izdelave: 1986, Stanje: dober (rabljeno), Universal milling machine Make: KUNZMANN Type: UF 6 / 3 Year: 1986 with Heidenhain digital readout Spindle taper: ISO 40 horizontal and vertical Spindle speeds: 50 - 2150 rpm Infinitely variable feeds: 0-1000 mm/min for X/Y axes and Z 0-250 mm/min Rapid traverse: 2000 mm/min X/Y and 500 mm/min Z Table size: 860 mm x 265 mm, swiveling ±45° Counter bearing, 2 arbors for horizontal milling Machine documentation available. In good condition, ready for demonstration. Laodpfxoich Dvo Ah Ajk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Rabljeni CNC orodni rezkalni stroj Leto izdelave: 2002 Proizvajalec krmilja: Heidenhain Tip krmilja: TNC 426 Delovno območje: X: 400 mm Y: 350 mm Z: 400 mm Vpenjalna površina: 650 x 350 mm (fiksna miza) Vpenjalo rezkalne vretena: SK40 Območje vrtljajev: 5 – 5000 1/min Pomik: 0–2 m/min Ledexz Rkyepfx Ah Aoak Izmenjevalec orodij: brez Oprema: standardna, posoda za ostružke, ročno kolo & dokumentacija, vključno z izjavo o skladnosti in varnostno kopijo podatkov

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3, Heidenhain Digital Readout, Year 1994 – Excellent Condition! Technical Specifications: • Year of manufacture: 1994 • Rigid angular table • Spindle speed range: 40 – 2550 rpm Laedsvyr R Nopfx Ah Ajk • Infinitely variable feed in X, Y, Z axes: 0 – 2000 mm/min • Travels (X/Y/Z): 400/320/400 mm • Rapid traverse in all axes • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic drawbar system • Weight: approx. 1500 kg Equipment and Accessories: • 3-axis Heidenhain digital readout • Centralized electric lubrication • Machine leveling feet • Handwheels • Coolant unit About the Machine: For sale is a Kunzmann WF4/3 universal milling machine in excellent condition. The machine comes from a government entity and was only lightly used. Switching from vertical to horizontal milling is quick and easy by simply swinging the vertical head aside. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.020 mm, pomik osi Y: 620 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 24 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC530, teža obdelovanca (maks.): 850 kg, širina mize: 1.020 mm, dolžina mize: 610 mm, obremenitev mize: 850 kg, skupna masa: 8.400 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 9.200 h, nos vretena: SK40, število vreten: 1, število mest v zalogovniku orodij: 32, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Ta izjemno robusten Kunzmann BA 1000 je v zelo dobrem stanju in ga je mogoče v delovanju ogledati v našem razstavnem salonu. Gre za precej kompaktno strojno opremo, a še vedno z velikim delovnim območjem (X:1020 mm - Y:620 mm) in z mizo velikosti 1200x610 mm ter maso 8.400 kg. Laedjxwk Nnopfx Ah Aek Stroj je opremljen z: transporterjem ostružkov, elektronskim ročnim kolesom, izpiralno pištolo, Losma sistemom za odsesavanje megle, Step-Tec vretenom, merilnikom višine Heidehain TT 140, 3 modularnimi strojniškimi primeži, 32 kakovostnimi nosilci orodja skupaj z rezalnimi orodji in originalno dokumentacijo.

Stanje: rabljeno, Leto izdelave: 1977, Technical details: X-axis travel: 450 mm Y-axis travel: 200 mm Z-axis travel: 400 mm Spindle taper ISO: SK 30 Distance table/horizontal spindle: max. 400 mm Cross beam adjustment - horizontal: 400 mm (manual) Speed range, horizontal: 30 - 1275 rpm / 18 steps Spindle taper horizontal & vertical: SK30 Distance spindle/table, vertical: max. 430 mm Quill stroke: 60 mm Swivel range +/-: 90° Speed range, vertical spindle: 50 - 215 rpm / 18 steps Clamping surface: 860 x 240 mm Table swivel approx.: 45° Feed rate: 0 - 1,000 mm/min, stepless Rapid traverse: 2,000 mm/min Total power requirement: 6.0 kW Machine weight approx.: 3,100 kg Machine dimensions (LxWxH) approx.: 1.6 x 1.6 x 1.9 m Laodpfx Aovc Awfsh Ajk Coolant system Heidenhain 3-axis digital readout Control panel Accessories as shown in photo In stock.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 600 M Milling Machine (2012) Manufacturer: Kunzmann Model: WF 600 M Year of manufacture: 2012 Condition: Used, very good Control: Heidenhain TNC 124 X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table length: 650 mm Table width: 350 mm Spindle speed: 4,500 rpm Lodpfxjxwl Ulj Ah Aoak Vertical quill and horizontal quill: SK40 Hydraulic drawbar system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx.: 2,000 kg Coolant system Scope of delivery: - Documentation - Machine lamp - Machine mounts - Machine vice

Stanje: rabljeno, Universal NC milling machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture 1998 Travel paths X: 400 mm, Y: 320 mm, Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed 40 - 2500 rpm Feed rates X, Y, and Z axes stepless from 0 - 1000 mm/min Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill adjustment vertical 60 mm Spindle motor power 3 kW Mains connection 400 Volt, 50 Hz - CNC path control Heidenhain TNC 124 - Spindle speed in 2 gear ranges and stepless via electronically controlled variator gearbox - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet attached to the machine - Coolant tank with pump positioned alongside - Central lubrication Laedpfslvyrbsx Ah Aok - Lighting Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1300 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 5.238 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 120007, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 700 mm, pomik po osi Z: 750 mm, model krmilnika: Heidenhain TNC530, največja hitrost vretena: 8.000 obr/min, TEHNIČNI PODATKI Premik X: 1.200 mm Premik Y: 700 mm Premik Z: 750 mm Maksimalno število vrtljajev vretena: 8.000 vrt/min PODROBNOSTI O STROJU Krmiljenje: Heidenhain TNC530 Električni podatki Obratovalna napetost: 400 V / 50 Hz Krmilna napetost: 24 V Moč: 35 kVA Nazivni tok: 50 A Glavna varovalka: 6,3 A Laodpfexnwxqox Ah Aok Obratovalne ure Ure vretena: 5.238 h Ure vklopa krmiljenja: 17.705 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from Training Workshop!! Technical Data: • Year of manufacture: 2010 • Machine No.: 347283 • Rigid angle table • Spindle speed: stepless up to 4500 rpm • Feed: stepless in 3 axes from 0 to 2000 mm/min • Rapid traverse (X and Y axis): 5000 mm/min Z axis: 4000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table surface: 650 x 350 mm • Table load: 250 kg Ledpfsxuppusx Ah Ajak • Vertical quill stroke: 60 mm • Vertical quill and horizontal quill – SK40 • Hydraulic drawbar system • Weight approx. 1800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Features: • Heidenhain TNC 320 CNC control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition with very low operating hours. It was used exclusively for training purposes. The TNC 320 control is very user-friendly. Furthermore, the machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is extremely simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann under power at our site. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 CNC control are available. All machines are immediately available.

Stanje: rabljeno, Leto izdelave: 2000, Obdelovalni center Kunzmann BA 600 popolnoma opremljen z Heidenhain krmiljem. Zelo dobro ohranjen, vendar občasno prihaja do težav s krmiljenjem. Lodpfxjxn Av Uj Ah Asak

Stanje: rabljeno, Leto izdelave: 1989, x-hod 500 mm y-hod 360 mm z-hod 420 mm Krmiljenje Heidenhain 355 Vpenjalo za orodje SK 40 Teža stroja cca 1,7 t Laodpsh Hrvfsfx Ah Aek +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega prikaz pod napetostjo ali izdelava videa ni možna. Naš oglas vsebuje najbolj reprezentativne fotografije najboljše možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 7 CNC Milling Machine TNC 410 Control Manufacturer: Kunzmann Model: WF 7 Year of manufacture: 2001 Condition: Used, under power Lsdpfx Ahjxwl Ufe Ajak Control: Heidenhain TNC 410 X-axis travel: 610 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle taper: SK 40 Speed range: 1–5000 RPM Tilting/swiveling table Scope of delivery: – Documentation – Various tool holders

Stanje: rabljeno, Leto izdelave: 2004, Technical data: Travel (X/Y/Z): 650 / 500 / 450 mm Clamping area: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 6,500 rpm Maximum table load: 400 kg Number of tool magazine slots: 20 Power consumption: 24 kVA Machine weight, approx.: 5,500 kg Equipment: - Motor spindle 12,000 rpm - 20-position tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain electronic handwheel - Menzel minimum quantity lubrication system Lasdpfx Ajwglapeh Ajk - Approx. 25 tool holders

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control - Excellent Condition, CE Certified, from Training Workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347284 - Fixed angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed on 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic clamping system - Weight approx. 1,800 kg - Space requirement approx.: 2.3 x 2 x 2 m Lodpfxoxupdlj Ah Asak - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping for vertical and horizontal operations - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, user manual for the control, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used solely for training purposes. The control is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal operation is very simple thanks to the folding vertical head. The guideways are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls are available. The machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 12.959 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 12.000 obr/min, skupna višina: 2.450 mm, skupna širina: 2.400 mm, skupna dolžina: 3.100 mm, širina mize: 630 mm, dolžina mize: 630 mm, obremenitev mize: 350 kg, skupna masa: 6.800 kg, Kunzmann WF 650 5-Axis Machining Center, Simultaneous (2009) Manufacturer: Kunzmann Model: WF 650 5-Axis Machining Center, Simultaneous Year of Manufacture: 2007 Commissioning: 2009 Condition: Used, very good Machine ON hours: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software package 1 for iTNC 530 X-axis: 650 mm Y-axis: 500 mm Z-axis: 450 mm Lodpfoxwl T Uox Ah Aeak Swiveling range of vertical milling head: -5° to +95° NC rotary table diameter: 630 mm Table load capacity: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 tools ICU: Tool clamp with coolant supply and air blast device through the spindle, delivery rate 25 l/min at 40 bar Selectable water/air through the spindle Paper band filter CNC-controlled milling head (B-axis) Preparation kit for probe TS 640 3D probe with infrared transmission Dimensions (LxWxH) approx.: 3.1 x 2.4 x 2.45 m Weight approx.: 6,800 kg Coolant system (LxWxH) approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine levelling feet – Machine lamp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF4/3 Universal Tool Milling Machine with Heidenhain TNC 320 CNC Control, Excellent Condition, CE-Compliant from Training Workshop! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable speed up to 4500 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axes: 5000 mm/min Ledpfexupc Uox Ah Ajak Z axis: 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very easy by tilting away the vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been both mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location. There are 7 pieces of Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls available. The machines are immediately available.