Kunzmann Wf4 3 nakup rabljenega (71)

Stanje: skoraj kot novo (rabljeno), Machine as new from laboratory X-axis travel: 400 mm Y-axis travel: 320 mm Z-axis travel: 400 mm Control system: Heidenhain TNC124 Podpfx Aju Nnaieafogu Table size: 650 x 350 mm Tool holder: SK 40 Spindle speeds: 0-4,000 rpm Quill stroke: 60 mm Vertical head swivels 90 degrees Total power requirement: 5.0 kW Machine weight: approx. 1.3 t Space required: approx. 2.00 x 2.00 x 2.00 m

Stanje: potreben popravila (rabljeno), Leto izdelave: 1996, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 340547, potovalna razdalja osi X: 400 mm, pomik osi Y: 320 mm, pomik po osi Z: 400 mm, poteza s peresom: 60 mm, skupna masa: 1.300 kg, dolžina mize: 650 mm, teža obdelovanca (maks.): 250 kg, širina mize: 350 mm, moč: 10 kW (13,60 KM), model krmilnika: TNC 124, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The listed milling machine is being sold as defective. Displayed error: Major positioning error on the Z-axis Otherwise, the machine is in good condition and was used exclusively for training purposes. Pedpfx Aswlqtfeafsgu The following parts were newly installed by the service team: - Supply module - Z-axis assembly with brake - Z-axis linear measurement system - Wipers on all axes - Filter mats - Synchronous belt - X-axis linear measurement system - Signal converter for measurement system Total costs for maintenance and repairs amounted to €15,000. The error is still present. Due to the age of the machine and the modernization of the workshop, further repairs have been discontinued. You are welcome to inspect the machine. All information is provided without any warranty or guarantee.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, skupna višina: 2.100 mm, skupna širina: 2.100 mm, skupna dolžina: 2.300 mm, širina mize: 450 mm, dolžina mize: 750 mm, največja hitrost vrtenja: 4.500 obr/min, vrtljajska hitrost (min.): 1 obr/min, skupna masa: 1.900 kg, teža obdelovanca (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, spindle speeds 1 - 4500 rpm, motor 4.5 kW, spindle taper SK 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping system, coolant system, splash guard, tool holders, electronic handwheel, operating manual Pgedpfx Aswb Erzeafeu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Year 2010 – Excellent Condition with Tooling, CE Compliant! Technical Specifications: >> Year of manufacture: 2010 >> Rigid angle table >> Spindle speed: infinitely variable up to 4,000 rpm >> Infinitely variable feeds on 3 axes from 0 to 2,000 mm/min >> Travel (X/Y/Z): 400 / 350 / 400 mm >> Rapid traverse x/y/z: 5 / 5 / 4 m/min >> Table size: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1,700 kg >> Required floor space approx.: 2.3 x 2 x 2 m >> Motor power: 12 KVA Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual and programming examples >> Handwheels >> Coolant system >> Tool holders, hydraulic vise, clamping tools About the machine: Pgedpfxjw Id Dzs Aafsu For sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in excellent original condition and comes from a facility where it was only sporadically used for training purposes. The control unit is very easy to operate. The machine features hydraulic clamping for both vertical and horizontal operation. Switching between vertical and horizontal milling is very straightforward, thanks to the swing-away vertical head. The guides are regularly lubricated by a central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the machine under power at our site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 2.542 h, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 4/3 Milling Machine TNC 320 Podpow D D Sfofx Aafsgu Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill travel: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirements: approx. 2,000 x 2,000 x 2,100 mm Total power requirement: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety cabin – LED machine light

Stanje: rabljeno, Leto izdelave: 1995, - Heidenhain digital position display - Infinitely variable feed on all axes - Rapid traverse on all axes - Hydraulic tool clamping system - Rigid angular table - Electrical central lubrication system - Coolant system - Workplace lighting - Machine feet - Year of manufacture: 1995 Specifications Milling Table: - Clamping surface: 650 x 350 mm - T-slots: 5 - T-slot width: 14 H7 mm - T-slot spacing: 63 mm - Max. load: 250 kg Working Area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Psdevhfqrepfx Aafjgu Max. Distances: - Table top to horizontal spindle centre: 140 – 540 mm - Table top to bottom edge of vertical head max.: 430 mm Milling Spindle: - Tool holder: SK40 - Speeds vertical/horizontal: 40 – 2550 rpm - Gear stages: 2 - Quill stroke vertical: 60 mm - Vertical head swivel range (both sides): 90° Feeds: - Longitudinal & cross feed: 0 – 1000 mm/min - Longitudinal & cross rapid traverse: 4000 mm/min - Vertical feed: 0 – 1000 mm/min - Vertical rapid traverse: 3000 mm/min General Data: - Drive power: 3 kW / 1410 rpm - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Kunzmann WF4/3 Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year 2002, Excellent Condition CE Compliant!! Podpfow U Exyjx Aafjgu Technical Specifications: - Year of manufacture: 2002 - Fixed angle table - Infinitely variable speed up to 4000 rpm - Stepless feed in 3 axes from 0 to 2000 mm/min - Travel X/Y/Z: 400/350/400 mm - Rapid traverse X/Y/Z: 5 / 5 / 4 m/min - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic tool clamping system - Weight approx. 1700 kg - Space requirement approx.: 2.3 x 2 x 2 m - Power consumption: 12 KVA Accessories and Equipment: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal directions. Switching from vertical to horizontal operation is very easy by simply swinging away the vertical head. The guideways are regularly lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power at our location. Further milling machines from renowned manufacturers can be found on our website.

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), X-axis: 400 mm, Y-axis: 350 mm, Z-axis: 400 mm, Table dimensions: 650 mm x 350 mm, Tool holder: SK 40, Spindle speed: 1-4000 rpm, Quill stroke: 60 mm, Max. feed rate: 2000 mm/min, Control system: Heidenhain TNC 124, Connected load: 5.5 kW, Dimensions: 2000 mm x 1000 mm x 2100 mm, Weight: 1.8 t. The machine is not operational and repeatedly returns errors: issues with motion monitoring on the Z and Y axes, significant positioning error on the Z axis, malfunctions when moving the control console. The operational readiness relay is missing and the fault is permanently present on startup. After several attempts, referencing is possible. The spindle gearbox is worn out. On-site inspection is possible. Psdpfx Aaouqacwjfegu

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 400 mm, pomik osi Y: 320 mm, pomik po osi Z: 400 mm, hitrost pomika os X: 2.000 m/min, hitrost podajanja osi Y: 2.000 m/min, hitrost podajanja os Z: 2.000 m/min, poteza s peresom: 60 mm, hitro pomikanje X-os: 5.000 m/min, hitri pomik os Y: 5.000 m/min, hitri pomik na osi Z: 4.000 m/min, skupna višina: 2.000 mm, skupna širina: 2.000 mm, skupna dolžina: 2.000 mm, širina mize: 650 mm, dolžina mize: 350 mm, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 1 obr/min, obremenitev mize: 250 kg, skupna masa: 2.000 kg, Oprema: dokumentacija / priročnik, Stanje stroja: Stroj je trenutno še vedno v uporabi in je v delujočem stanju. Pozitivno izpostavljeno: Enostavno upravljanje preko krmilnika TNC124 Nizko vzdrževanje, robustna konstrukcija stroja Možno ročno vrtanje (samo linearna obdelava) Omejitve: Omejena geometrija stroja (malenkost nenatančno) Relativno visoka poraba olja Dodatne informacije: Pgodpfx Aasw Icwmefju Popolna dokumentacija o stroju je na voljo. Motor 5 kW, vreteno SK 40, krmilnik Heidenhain TNC124, Vertikalna in horizontalna pinola - SK40, centralno mazanje, ročna kolesa, hladilna naprava.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control – In Excellent Condition, CE Compliant! Technical Specifications: - Year of manufacture: 2000 Machine No.: 343030 - Fixed angle table Pgedpfxjwzu Sks Aafsu - Infinitely variable spindle speed up to 4000 rpm - Infinitely variable feed in 3 axes from 0 to 2000 mm/min - Travel X/Y/Z: 400/320/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic drawbar system - Weight approx. 1800 kg - Floor space required approx.: 2.3 x 2 x 2 m - Drive power: 13 KVA Accessories and Equipment: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels - Coolant system About the Machine: For sale is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in excellent condition. It comes from a facility where it was used sparingly, primarily for training purposes. The machine features a very user-friendly control system. Furthermore, it has hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal mode is very straightforward by swiveling away the vertical head. The guideways are lubricated regularly via the centralized lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power at our site.

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, For sale is a milling machine from Kunzmann, model WF 4/3. The machine is fully operational and ready for immediate use. Technical specifications: Control: Heidenhain TNC 124 Year of manufacture: 1996 Working area longitudinal X-axis: 400 mm Transverse Y-axis: 350 mm Vertical Z-axis: 400 mm Fixed angle table, clamping surface: 650 x 350 mm Max. table load: 250 kg Main drive AC motor: 5.5 kW Feed drives: AC individual drives Infinitely variable feed: 0 - 2,000 mm/min Tool holder: SK 40 Spindle speed range: 1–4000 rpm Quill, vertical: stroke 60 mm Swivelling range, vertical milling head: ± 90° Pgedpfx Aajvftrxsfou Tool clamping: hydraulic Direct linear measuring systems, coded distance, resolution 0.001 mm Max. position deviation (Pmax) according to VDI/DGQ 3441: 0.015 mm Operating voltage: 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg Transport and loading can be organised Europe-wide upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be glad to assist you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or ways to contact us, please visit our website.

Stanje: dober (rabljeno), Horizontal milling attachment – counter holder for KUNZMANN milling machines, WF series. This was an accessory for a KUNZMANN WF 4/3 TNC 124. There are 2 units available. The current new price from Kunzmann is over €2,000 plus VAT. With a suitable adapter plate, it should also fit other machines such as EMCO, MIKRON, DECKEL, FPS, etc. Pedpfxjvr Stuj Aafsgu Price quoted net ex-stock.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant! Technical Specifications: - Year of manufacture: 2008, Machine No. 348084 - Rigid universal angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed on 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min, Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal spindle: SK40 taper - Hydraulic clamping system - Weight: approx. 1,800 kg - Space requirement: approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Features and Accessories: - Heidenhain TNC 320 CNC control - Hydraulic clamping vertical and horizontal - Centralized automatic lubrication system - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: Pjdev Dut Ispfx Aafjgu Offered for sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. The machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated by the centralized lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Kunzmann under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3, Heidenhain Digital Readout, Year 1994 – Excellent Condition! Technical Specifications: • Year of manufacture: 1994 • Rigid angular table • Spindle speed range: 40 – 2550 rpm Pjdpfxsvyr R No Aafsgu • Infinitely variable feed in X, Y, Z axes: 0 – 2000 mm/min • Travels (X/Y/Z): 400/320/400 mm • Rapid traverse in all axes • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic drawbar system • Weight: approx. 1500 kg Equipment and Accessories: • 3-axis Heidenhain digital readout • Centralized electric lubrication • Machine leveling feet • Handwheels • Coolant unit About the Machine: For sale is a Kunzmann WF4/3 universal milling machine in excellent condition. The machine comes from a government entity and was only lightly used. Switching from vertical to horizontal milling is quick and easy by simply swinging the vertical head aside. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE-Compliant! Technical Data: >> Year of manufacture: 2006 Machine no.: 348013 >> Fixed angular table >> Infinitely variable spindle speed up to 4,500 rpm >> Stepless feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm Pedpfxjwrhxfj Aafjgu >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 15 kVA Equipment and Accessories: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual, programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Furthermore, the machine features hydraulic clamping in both vertical and horizontal positions. Converting from vertical to horizontal operation is straightforward due to the swing-away design of the vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested at our premises. Take advantage of the opportunity to inspect and test the Kunzmann under power at our location.

Stanje: rabljeno, Leto izdelave: 1996, x-axis travel: 400 mm y-axis travel: 350 mm z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,000 rpm Feed rates: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 CNC control: TNC 124 Motor power: 5.5 kW Weight: 1,800 kg Required space: approx. 2,000 x 1,000 x 2,100 mm Original price: ~ EUR 55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN TNC 124 CNC control - Swiveling control panel, positioned on the right Pedpfxow U U Sie Aafogu - Hydraulic tool changer (DIN 69872) - Vertical milling head – SK 40 - X-axis feed: 0 – 2,000 mm/min - Y-axis feed: 0 – 2,000 mm/min - Z-axis feed: 0 – 2,000 mm/min - Centralized electric lubrication - Coolant system - Chip tray - Operating manual for both machine and control Special accessories included: - Hydraulic machine vice - Multiple tool holders - HEIDENHAIN HR 410 electronic handwheel

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red RAL7016 anthracite grey Machine no.: 344025 Pgedom Nbwtspfx Aafeu with warranty Geometric inspection with test protocol Accessories: - HEIDENHAIN TNC 124 path control system - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probing system • For detecting the workpiece position • For determining workpiece reference points • For measuring finished parts • Incl. Weldon chuck SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) • Swivels on 3 axes • Rotatable 360° (displayed digitally in the control as a 4th axis) • Tiltable +/- 30° • Tilt range towards the machine 45° • Tilt range away from the machine 15° • Centering bore Ø 32 mm • Table load capacity 150 kg - Vertical milling head SK 40 • With hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Splash guard cabin, movable, electrically secured - Operating instructions Used as seen The machine complies technically with the standards of its year of manufacture.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.000 obr/min, poteza s peresom: 60 mm, širina mize: 650 mm, dolžina mize: 350 mm, skupna masa: 1.800 kg, Oprema: dokumentacija / priročnik, Dear Sir or Madam, For sale is a Kunzmann WF4/3 CNC milling machine, year of construction 2004. The machine can be operated both manually and under CNC control. The Heidenhain TNC124 controller is ideal for learning basic CNC programming and remains a popular choice for production applications as well as for machining special components. The quickly retractable vertical milling head turns the Kunzmann into a true all-rounder with a compact footprint. This machine is available from us workshop-tested, partially refurbished, or fully overhauled—each variant available with or without an enclosure. Availability: on request Year of manufacture: 2004 Control: Heidenhain TNC124 Table: fixed angular table 650x350mm Travels: X400mm / Y350mm / Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1–4000 rpm Feed rate: 0–2000 mm/min Tool holder: SK40 Equipment and accessories: coolant system, central lubrication, instruction manual, documentation, machine feet, electronic handwheel, etc. Psdou H U Hkopfx Aafogu Our service promise to you: - We are a certified master craftsman business specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced prior to delivery - Upon request, we can completely or partially overhaul the selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install further accessories such as safety devices - We are happy to arrange shipping and/or on-site installation for you

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Machine no.: 344349 Pgjdpfx Aohikrreafou Warranty: 6 months Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Centralized lubrication, electric - Coolant system - Chip tray - Operating manual - Used, sold as seen -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1999, Universal Tool Milling Machine Make: KUNZMANN Model: WF 4/3 Pgedpfx Aajub R R Sofeu Year of manufacture: 1999 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine number: 343006 with warranty Geometric inspection with test certificate Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system ISO 7388 - Central lubrication, electric - Coolant system - Splash guard cabin, electrically interlocked - Control panel on base - Operating manual used, sold as seen The machine corresponds, from a technical standpoint, to the state of the art at the time of its year of manufacture.

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, CNC Milling Machine KUNZMANN - WF7/3 X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table length: 650 mm Table width: 400 mm Pgodpfxewq Ndgj Aafju Max. table load: 250 kg Quill stroke: 40 mm Length: 2800 mm Width: 2400 mm Height: 2100 mm Weight: 2000 kg

Stanje: dober (rabljeno), Leto izdelave: 2001, Heidenhain TNC 310 CNC control Electronic handwheel Coolant system Technical Specifications: X-axis travel (longitudinal): 600 mm Y-axis travel (cross): 400 mm Z-axis travel (vertical): 400 mm Spindle taper: SK 40 Spindle speed range: 60–5000 rpm Feed rate: 0–2000 mm/min Rapid traverse x/y: 5 m/min Rapid traverse z: 4 m/min Total drive capacity: 7 kW Approximate weight: 2000 kg Technical data, accessories, and description of the machine are not binding. Pgjdpfx Aajit Tr Tsfeu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control unit: HEIDENHAIN TNC 410 Spindle speeds – infinitely variable: 0 – 4000 rpm Quill stroke: 60 mm Tool holder: SK 40 Table clamping surface: 650 x 350 mm Pgsdpjunt Ihjfx Aafou Total power requirement: 6.5 kW Machine weight approx. 1.8 t Space requirements approx. 2.5 x 1.8 x 2.0 m Electronic handwheel HR 410 Probing system MP 11, automatic tool measurement TT 120 Enclosure, tool holders, ...

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 350119, Table clamping surface: 350 x 700 mm X-axis travel: 500 mm Pgjdpfx Ajgq Dclsafju Y-axis travel: 320 mm Z-axis travel: 400 mm Spindle taper: SK 40 Spindle speeds: 30 – 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Required space: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF7/3 CNC with Heidenhain TNC 124 Control – Excellent CONDITION! Technical Data: >> Year of manufacture: 1996 Machine No. 370173 >> Fixed angle table >> Infinitely variable spindle speed up to 3700 rpm >> Infinitely variable feed in 3 axes from 0 to 1000 mm/min >> Travel X/Y/Z: 600/400/400 mm >> Rapid traverse X/Y/Z: 5 / 5 / 4 m/min >> Table size: 650 x 350 mm >> Table load capacity: 300 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Main drive motor: 4 kW >> Total power consumption: approx. 7 kVA Accessories and Equipment: Pjdpsw Rx Tiefx Aafjgu >> Heidenhain TNC 124 Control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual, and programming examples >> Full safety enclosure >> Coolant system >> Electronic handwheel About the Machine: Offered here is a Kunzmann WF7/3 tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from an automotive manufacturer, where it was used only sparingly for training purposes. The control is very user-friendly. Additionally, the machine is fitted with hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated by the automatic central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power on site.