Rezkalni stroj

Kunzmann WF4/3

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2007, Excellent CONDITION with 90 Tool Holders, CE-compliant!! Technical Data: >> Year of manufacture: 2007 Machine no.: 344283 >> Rigid angle table >> Spindle speed: infinitely variable up to 4,000 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Rapid traverse x/y/z: 5 / 5 / 4 m/min >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1,700 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 Control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, controller operating manual, and programming examples >> Handwheels Dlodpjx Ebygjfx Aa Hsa >> Coolant system >> Approx. 90 tool holders with tool carrier About the machine: For sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a facility where it was only lightly used for training purposes. The control system is very easy to operate. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal setup is very simple, thanks to the swing-away vertical head. The ways are lubricated regularly via central lubrication. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann under power at our site. Immediately available.

Stanje: dober (rabljeno), Width: 700 mm Length: 2000 mm Plate thickness: 40 mm Height: 850 mm Dledpfx Asvitcloa Hea Weight: 134 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Splošni podatki Širina: 2000 mm Globina: 2000 mm Višina: 2000 mm Dedpox D Er Rsfx Aa Hjla Premiki Premik po osi X: 400 mm Premik po osi Y: 320 mm Premik po osi Z: 400 mm Orodja Tip držala orodja: SK40 Univerzalni rezkalni stroj KUNZMANN WF4/3 je bil izdelan leta 1998. Ima vpenjalno površino 650 x 350 mm, maksimalno nosilnost 250 kg in držalo orodja SK40. Hitrost se giblje od 40 do 2500 vrt/min, z hodom pinole 60 mm. Stroj vključuje krmilno omaro in tehta približno 1300 kg. Idealen je za natančne rezkalne aplikacije. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: rabljeno, Leto izdelave: 1995, - Heidenhain digital position display - Infinitely variable feed on all axes - Rapid traverse on all axes - Hydraulic tool clamping system - Rigid angular table - Electrical central lubrication system - Coolant system - Workplace lighting - Machine feet - Year of manufacture: 1995 Specifications Milling Table: - Clamping surface: 650 x 350 mm - T-slots: 5 - T-slot width: 14 H7 mm - T-slot spacing: 63 mm - Max. load: 250 kg Working Area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Distances: - Table top to horizontal spindle centre: 140 – 540 mm - Table top to bottom edge of vertical head max.: 430 mm Milling Spindle: - Tool holder: SK40 - Speeds vertical/horizontal: 40 – 2550 rpm - Gear stages: 2 - Quill stroke vertical: 60 mm - Vertical head swivel range (both sides): 90° Dlsdpsvhfqrsfx Aa Hja Feeds: - Longitudinal & cross feed: 0 – 1000 mm/min - Longitudinal & cross rapid traverse: 4000 mm/min - Vertical feed: 0 – 1000 mm/min - Vertical rapid traverse: 3000 mm/min General Data: - Drive power: 3 kW / 1410 rpm - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 2.542 h, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill travel: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirements: approx. 2,000 x 2,000 x 2,100 mm Dljdpfx Aaow D D Sfj Hsa Total power requirement: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety cabin – LED machine light

Stanje: rabljeno, Universal NC milling machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture 1998 Travel paths X: 400 mm, Y: 320 mm, Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed 40 - 2500 rpm Feed rates X, Y, and Z axes stepless from 0 - 1000 mm/min Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill adjustment vertical 60 mm Spindle motor power 3 kW Mains connection 400 Volt, 50 Hz - CNC path control Heidenhain TNC 124 - Spindle speed in 2 gear ranges and stepless via electronically controlled variator gearbox Dodpjlvyrbefx Aa Hsla - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet attached to the machine - Coolant tank with pump positioned alongside - Central lubrication - Lighting Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1300 kg Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3, Heidenhain Digital Readout, Year 1994 – Excellent Condition! Technical Specifications: • Year of manufacture: 1994 • Rigid angular table • Spindle speed range: 40 – 2550 rpm • Infinitely variable feed in X, Y, Z axes: 0 – 2000 mm/min • Travels (X/Y/Z): 400/320/400 mm • Rapid traverse in all axes • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic drawbar system • Weight: approx. 1500 kg Equipment and Accessories: • 3-axis Heidenhain digital readout • Centralized electric lubrication • Machine leveling feet Dlodpsvyr R Nefx Aa Hoa • Handwheels • Coolant unit About the Machine: For sale is a Kunzmann WF4/3 universal milling machine in excellent condition. The machine comes from a government entity and was only lightly used. Switching from vertical to horizontal milling is quick and easy by simply swinging the vertical head aside. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our facility.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red RAL7016 anthracite grey Machine no.: 344025 with warranty Geometric inspection with test protocol Accessories: - HEIDENHAIN TNC 124 path control system - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probing system • For detecting the workpiece position • For determining workpiece reference points • For measuring finished parts • Incl. Weldon chuck SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) • Swivels on 3 axes • Rotatable 360° (displayed digitally in the control as a 4th axis) • Tiltable +/- 30° • Tilt range towards the machine 45° • Tilt range away from the machine 15° • Centering bore Ø 32 mm • Table load capacity 150 kg - Vertical milling head SK 40 • With hydraulic clamping system DIN 69872 Dodpfx Aem Nbwtja Hela - Central lubrication, electric - Coolant system - Splash guard cabin, movable, electrically secured - Operating instructions Used as seen The machine complies technically with the standards of its year of manufacture.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from Training Workshop!! Technical Data: • Year of manufacture: 2010 • Machine No.: 347283 • Rigid angle table • Spindle speed: stepless up to 4500 rpm • Feed: stepless in 3 axes from 0 to 2000 mm/min • Rapid traverse (X and Y axis): 5000 mm/min Z axis: 4000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table surface: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical quill and horizontal quill – SK40 Dedpfx Aasxuppue Hjla • Hydraulic drawbar system • Weight approx. 1800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Features: • Heidenhain TNC 320 CNC control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition with very low operating hours. It was used exclusively for training purposes. The TNC 320 control is very user-friendly. Furthermore, the machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is extremely simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann under power at our site. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 CNC control are available. All machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Kunzmann WF4/3 with Heidenhain TNC 320 contouring control, in excellent condition, CE-compliant, from a training workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347281 - Fixed angle table - Infinitely variable spindle speed up to 4500 rpm - Infinitely variable feed on 3 axes from 0 to 2000 mm/min - Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min - Travel X/Y/Z: 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 taper - Hydraulic drawbar system - Weight approx. 1,800 kg - Space requirements approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Dsdpfoxupd Sjx Aa Hsla Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: Offered here is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 control. This machine is in very good condition and has very few operating hours. It comes from an operation where it was used exclusively for training purposes. The control is extremely user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal positions. Switching between vertical and horizontal setup is very easy due to the tilting vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann on site under power. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 control are available. The machines are immediately available.

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, model krmilnika: iTNC 530, največja hitrost vrtenja: 18.000 obr/min, skupna masa: 12.500 kg, General Data Measurements width 3970 mm Measurements depth 4629 mm Measurements height 3050 mm Machine weight 12700 kg Main Drive Number of spindles 1 Spindle speed range 16000 rpm Spindle motor power 10 kW Tool taper SK 40 Number of axis 3 Movement X-Axis Movement 1200 mm Y-Axis Movement 900 mm Z-Axis Movement 500 mm Unfpvoddib Djdpfx Asvambija Hela Table Outer length 1400 mm Outer width 900 mm This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It features a robust clamping table measuring 1400 x 900 mm and a high-performance milling spindle with a maximum power of 10 kW, torque up to 87 Nm, and speeds up to 16,000 RPM. Ideal for complex machining tasks, the HERMLE C 1200 V machine we have for sale offers precision and durability. Contact us for more information. Application Types Milling

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control - Excellent Condition, CE Certified, from Training Workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347284 - Fixed angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed on 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic clamping system - Weight approx. 1,800 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping for vertical and horizontal operations - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, user manual for the control, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: Dsdpfxexupdlj Aa Hola For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used solely for training purposes. The control is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal operation is very simple thanks to the folding vertical head. The guideways are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls are available. The machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF4/3 Universal Tool Milling Machine with Heidenhain TNC 320 CNC Control, Excellent Condition, CE-Compliant from Training Workshop! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable speed up to 4500 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Dledpfsxupc Uox Aa Hoa Accessories and Equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very easy by tilting away the vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been both mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location. There are 7 pieces of Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls available. The machines are immediately available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, CNC Milling Machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Dlsdehlp Iwspfx Aa Hea Year of manufacture: 2001 Condition: Used Control unit: Heidenhain TNC 426 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping available throughout Germany and Austria. Surcharge: €1,000 Sale excludes any warranty.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from a Training Workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347285 Djdpexupczjfx Aa Hjla - Fixed angle table - Speed: infinitely variable up to 4,500 rpm - Feed rate: stepless in 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min - Travels (X/Y/Z): 400 / 350 / 400 mm - Table surface: 650 x 350 mm - Table load: 250 kg - Quill stroke, vertical: 60 mm - Vertical and horizontal quill – SK40 taper - Hydraulic tool clamping system - Weight approx. 1,800 kg - Space requirement approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Features: - Heidenhain TNC 320 CNC control system - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: For sale is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 CNC control system. This universal milling machine is in excellent condition with very low operating hours, previously used solely for training purposes. The control system is intuitive and user-friendly. The machine features hydraulic clamping for both vertical and horizontal setups. Conversion from vertical to horizontal operation is straightforward by swiveling away the vertical head. The guideways are regularly lubricated via the automatic central lubrication system. This Kunzmann has undergone both mechanical and electrical inspections in our facility. Take the opportunity to inspect and test the Kunzmann under power at our location. A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 control are available. Machines are in stock and immediately available.