Rezkalni stroj

Kunzmann WF4/3

Stanje: rabljeno, Universal NC milling machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture 1998 Travel paths X: 400 mm, Y: 320 mm, Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed 40 - 2500 rpm Feed rates X, Y, and Z axes stepless from 0 - 1000 mm/min Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill adjustment vertical 60 mm Spindle motor power 3 kW Mains connection 400 Volt, 50 Hz Laodpfjlvyrbox Ah Doh - CNC path control Heidenhain TNC 124 - Spindle speed in 2 gear ranges and stepless via electronically controlled variator gearbox - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet attached to the machine - Coolant tank with pump positioned alongside - Central lubrication - Lighting Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1300 kg Good condition

Stanje: skoraj kot novo (rabljeno), Machine as new from laboratory X-axis travel: 400 mm Y-axis travel: 320 mm Laedpfx Ahou Nnaij Dsh Z-axis travel: 400 mm Control system: Heidenhain TNC124 Table size: 650 x 350 mm Tool holder: SK 40 Spindle speeds: 0-4,000 rpm Quill stroke: 60 mm Vertical head swivels 90 degrees Total power requirement: 5.0 kW Machine weight: approx. 1.3 t Space required: approx. 2.00 x 2.00 x 2.00 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, skupna višina: 2.100 mm, skupna širina: 2.100 mm, skupna dolžina: 2.300 mm, širina mize: 450 mm, dolžina mize: 750 mm, največja hitrost vrtenja: 4.500 obr/min, vrtljajska hitrost (min.): 1 obr/min, skupna masa: 1.900 kg, teža obdelovanca (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, spindle speeds 1 - 4500 rpm, motor 4.5 kW, spindle taper SK 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping system, coolant system, splash guard, tool holders, electronic handwheel, operating manual Laodpfx Aowb Erzoh Doh

Stanje: potreben popravila (rabljeno), Leto izdelave: 1996, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 340547, potovalna razdalja osi X: 400 mm, pomik osi Y: 320 mm, pomik po osi Z: 400 mm, poteza s peresom: 60 mm, skupna masa: 1.300 kg, dolžina mize: 650 mm, teža obdelovanca (maks.): 250 kg, širina mize: 350 mm, moč: 10 kW (13,60 KM), model krmilnika: TNC 124, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The listed milling machine is being sold as defective. Displayed error: Major positioning error on the Z-axis Otherwise, the machine is in good condition and was used exclusively for training purposes. The following parts were newly installed by the service team: - Supply module - Z-axis assembly with brake - Z-axis linear measurement system - Wipers on all axes - Filter mats - Synchronous belt - X-axis linear measurement system - Signal converter for measurement system Total costs for maintenance and repairs amounted to €15,000. The error is still present. Due to the age of the machine and the modernization of the workshop, further repairs have been discontinued. You are welcome to inspect the machine. Lsdpfx Ajwlqtfeh Djah All information is provided without any warranty or guarantee.

Stanje: rabljeno, Leto izdelave: 1996, x-axis travel: 400 mm y-axis travel: 350 mm z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,000 rpm Feed rates: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Lsdpjw U U Siefx Ah Djah CNC control: TNC 124 Motor power: 5.5 kW Weight: 1,800 kg Required space: approx. 2,000 x 1,000 x 2,100 mm Original price: ~ EUR 55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN TNC 124 CNC control - Swiveling control panel, positioned on the right - Hydraulic tool changer (DIN 69872) - Vertical milling head – SK 40 - X-axis feed: 0 – 2,000 mm/min - Y-axis feed: 0 – 2,000 mm/min - Z-axis feed: 0 – 2,000 mm/min - Centralized electric lubrication - Coolant system - Chip tray - Operating manual for both machine and control Special accessories included: - Hydraulic machine vice - Multiple tool holders - HEIDENHAIN HR 410 electronic handwheel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Year 2010 – Excellent Condition with Tooling, CE Compliant! Technical Specifications: >> Year of manufacture: 2010 >> Rigid angle table >> Spindle speed: infinitely variable up to 4,000 rpm >> Infinitely variable feeds on 3 axes from 0 to 2,000 mm/min >> Travel (X/Y/Z): 400 / 350 / 400 mm >> Rapid traverse x/y/z: 5 / 5 / 4 m/min >> Table size: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1,700 kg >> Required floor space approx.: 2.3 x 2 x 2 m >> Motor power: 12 KVA Lasdow Id Dzopfx Ah Dsh Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual and programming examples >> Handwheels >> Coolant system >> Tool holders, hydraulic vise, clamping tools About the machine: For sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in excellent original condition and comes from a facility where it was only sporadically used for training purposes. The control unit is very easy to operate. The machine features hydraulic clamping for both vertical and horizontal operation. Switching between vertical and horizontal milling is very straightforward, thanks to the swing-away vertical head. The guides are regularly lubricated by a central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the machine under power at our site.

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), X-axis: 400 mm, Y-axis: 350 mm, Z-axis: 400 mm, Table dimensions: 650 mm x 350 mm, Tool holder: SK 40, Spindle speed: 1-4000 rpm, Quill stroke: 60 mm, Max. feed rate: 2000 mm/min, Control system: Heidenhain TNC 124, Connected load: 5.5 kW, Dimensions: 2000 mm x 1000 mm x 2100 mm, Weight: 1.8 t. The machine is not operational and repeatedly returns errors: issues with motion monitoring on the Z and Y axes, significant positioning error on the Z axis, malfunctions when moving the control console. The operational readiness relay is missing and the fault is permanently present on startup. After several attempts, referencing is possible. The spindle gearbox is worn out. On-site inspection is possible. Lsdpfsuqacwox Ah Djah

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Kunzmann WF4/3 Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year 2002, Excellent Condition CE Compliant!! Technical Specifications: - Year of manufacture: 2002 - Fixed angle table - Infinitely variable speed up to 4000 rpm - Stepless feed in 3 axes from 0 to 2000 mm/min - Travel X/Y/Z: 400/350/400 mm - Rapid traverse X/Y/Z: 5 / 5 / 4 m/min - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 Lasdpfsw U Exysx Ah Deh - Hydraulic tool clamping system - Weight approx. 1700 kg - Space requirement approx.: 2.3 x 2 x 2 m - Power consumption: 12 KVA Accessories and Equipment: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal directions. Switching from vertical to horizontal operation is very easy by simply swinging away the vertical head. The guideways are regularly lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power at our location. Further milling machines from renowned manufacturers can be found on our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 2.542 h, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill travel: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirements: approx. 2,000 x 2,000 x 2,100 mm Total power requirement: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation Ljdpfx Aow D D Sfsh Dsah – Full safety cabin – LED machine light

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 400 mm, pomik osi Y: 320 mm, pomik po osi Z: 400 mm, hitrost pomika os X: 2.000 m/min, hitrost podajanja osi Y: 2.000 m/min, hitrost podajanja os Z: 2.000 m/min, poteza s peresom: 60 mm, hitro pomikanje X-os: 5.000 m/min, hitri pomik os Y: 5.000 m/min, hitri pomik na osi Z: 4.000 m/min, skupna višina: 2.000 mm, skupna širina: 2.000 mm, skupna dolžina: 2.000 mm, širina mize: 650 mm, dolžina mize: 350 mm, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 1 obr/min, obremenitev mize: 250 kg, skupna masa: 2.000 kg, Oprema: dokumentacija / priročnik, Stanje stroja: Stroj je trenutno še vedno v uporabi in je v delujočem stanju. Pozitivno izpostavljeno: Enostavno upravljanje preko krmilnika TNC124 Nizko vzdrževanje, robustna konstrukcija stroja Možno ročno vrtanje (samo linearna obdelava) Ljdpew Icwmofx Ah Djah Omejitve: Omejena geometrija stroja (malenkost nenatančno) Relativno visoka poraba olja Dodatne informacije: Popolna dokumentacija o stroju je na voljo. Motor 5 kW, vreteno SK 40, krmilnik Heidenhain TNC124, Vertikalna in horizontalna pinola - SK40, centralno mazanje, ročna kolesa, hladilna naprava.