Rezkalni stroj - univerzalni

KUNZMANN WF 4

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, skupna višina: 2.100 mm, skupna širina: 2.100 mm, skupna dolžina: 2.300 mm, širina mize: 450 mm, dolžina mize: 750 mm, največja hitrost vrtenja: 4.500 obr/min, vrtljajska hitrost (min.): 1 obr/min, skupna masa: 1.900 kg, teža obdelovanca (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, spindle speeds 1 - 4500 rpm, motor 4.5 kW, spindle taper SK 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping system, coolant system, splash guard, tool holders, electronic handwheel, operating manual Fedpfxswb Erzo Ah Dsgh

Stanje: potreben popravila (rabljeno), Leto izdelave: 1996, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 340547, potovalna razdalja osi X: 400 mm, pomik osi Y: 320 mm, pomik po osi Z: 400 mm, poteza s peresom: 60 mm, skupna masa: 1.300 kg, dolžina mize: 650 mm, teža obdelovanca (maks.): 250 kg, širina mize: 350 mm, moč: 10 kW (13,60 KM), model krmilnika: TNC 124, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The listed milling machine is being sold as defective. Displayed error: Major positioning error on the Z-axis Otherwise, the machine is in good condition and was used exclusively for training purposes. The following parts were newly installed by the service team: - Supply module - Z-axis assembly with brake - Z-axis linear measurement system - Wipers on all axes - Filter mats - Synchronous belt Fsdpowlqtfjfx Ah Dsgh - X-axis linear measurement system - Signal converter for measurement system Total costs for maintenance and repairs amounted to €15,000. The error is still present. Due to the age of the machine and the modernization of the workshop, further repairs have been discontinued. You are welcome to inspect the machine. All information is provided without any warranty or guarantee.

Stanje: rabljeno, Leto izdelave: 2005, Control: Heidenhain TNC 310 Dimensions (L x W x H): 2000 x 2000 x 2000 mm Machine weight approx.: 2.0 t Kunzmann Universal Milling and Drilling Machine WF 4/3 – equipped with Heidenhain TNC 310 control The milling and drilling machine enables a wide range of machining operations, such as milling and drilling. Preferably, conventional materials used in mechanical engineering, such as steel, cast iron, and aluminum, should be processed. Materials like paper, graphite, minerals, or magnesium cannot or can only be processed with suitable safety equipment. Technical Data – Milling Table: • Clamping surface: 650 x 350 mm • T-slots: 5 • Slot width: 14 mm • Slot spacing: 63 mm • Maximum load: 250 kg Working area: • X-axis: 400 mm Fgodpfxjwwl Ine Ah Djh • Y-axis: 350 mm • Z-axis: 400 mm Maximum distances: • Table top to center of horizontal spindle: 540 mm • Table top to lower edge of vertical head (max.): 430 mm Milling spindle: • Tool holder: SK 40 • Spindle speeds, horizontal: 5–4,500 rpm • Spindle speeds, vertical: 5–4,500 rpm • Vertical quill stroke: 60 mm • Vertical head swivel range (each side): 90° Feed rate (potentiometer at 100%) longitudinal and cross: 0–2,000 mm/min. Rapid traverse longitudinal and cross: 5,000 mm/min. Feed rate vertical: 0–2,000 mm/min. Rapid traverse vertical: 4,000 mm/min. Drive power: • Power at 100% duty cycle: 8.0 kW • Power at 44% duty cycle (5 min operating time): 9.3 kW

Stanje: rabljeno, Leto izdelave: 1996, x-axis travel: 400 mm y-axis travel: 350 mm z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,000 rpm Fgjdpow U U Sisfx Ah Doh Feed rates: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 CNC control: TNC 124 Motor power: 5.5 kW Weight: 1,800 kg Required space: approx. 2,000 x 1,000 x 2,100 mm Original price: ~ EUR 55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN TNC 124 CNC control - Swiveling control panel, positioned on the right - Hydraulic tool changer (DIN 69872) - Vertical milling head – SK 40 - X-axis feed: 0 – 2,000 mm/min - Y-axis feed: 0 – 2,000 mm/min - Z-axis feed: 0 – 2,000 mm/min - Centralized electric lubrication - Coolant system - Chip tray - Operating manual for both machine and control Special accessories included: - Hydraulic machine vice - Multiple tool holders - HEIDENHAIN HR 410 electronic handwheel

Stanje: rabljeno, Leto izdelave: 2000, Used universal milling and drilling machine Kunzmann WF 4/3 Equipped with Heidenhain path control TNC 124 Travel X/Y/Z = 400/350/400 mm Speed range: 1-4000 rpm Vertical head with 60 mm quill Fixed angle table 650x350 mm Spindle SK40 with hydraulic tool clamping Accessories: - Heidenhain electronic handwheel HR 410 Fodpfx Ahsw U D Sxj Dsgh - Chip splash guard - Machine lamp - Coolant device - Machine feet The machine is located at 71334 Waiblingen-Beinstein, is available immediately and can be inspected upon request. Please arrange an appointment in advance.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Kunzmann WF4/3 Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year 2002, Excellent Condition CE Compliant!! Technical Specifications: - Year of manufacture: 2002 - Fixed angle table - Infinitely variable speed up to 4000 rpm - Stepless feed in 3 axes from 0 to 2000 mm/min - Travel X/Y/Z: 400/350/400 mm - Rapid traverse X/Y/Z: 5 / 5 / 4 m/min - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic tool clamping system - Weight approx. 1700 kg - Space requirement approx.: 2.3 x 2 x 2 m - Power consumption: 12 KVA Accessories and Equipment: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples Fjdpfx Ahew U Exye Degh - Handwheels - Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal directions. Switching from vertical to horizontal operation is very easy by simply swinging away the vertical head. The guideways are regularly lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power at our location. Further milling machines from renowned manufacturers can be found on our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Year 2010 – Excellent Condition with Tooling, CE Compliant! Technical Specifications: >> Year of manufacture: 2010 >> Rigid angle table >> Spindle speed: infinitely variable up to 4,000 rpm >> Infinitely variable feeds on 3 axes from 0 to 2,000 mm/min >> Travel (X/Y/Z): 400 / 350 / 400 mm Fgsdpfjw Id Dzex Ah Doh >> Rapid traverse x/y/z: 5 / 5 / 4 m/min >> Table size: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1,700 kg >> Required floor space approx.: 2.3 x 2 x 2 m >> Motor power: 12 KVA Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual and programming examples >> Handwheels >> Coolant system >> Tool holders, hydraulic vise, clamping tools About the machine: For sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in excellent original condition and comes from a facility where it was only sporadically used for training purposes. The control unit is very easy to operate. The machine features hydraulic clamping for both vertical and horizontal operation. Switching between vertical and horizontal milling is very straightforward, thanks to the swing-away vertical head. The guides are regularly lubricated by a central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the machine under power at our site.

Stanje: rabljeno, Universal NC milling machine KUNZMANN Type WF 3/4 Fgsdpfx Ahelvyrbe Deh Machine No. 341020 Year of manufacture 1998 Travel paths X: 400 mm, Y: 320 mm, Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed 40 - 2500 rpm Feed rates X, Y, and Z axes stepless from 0 - 1000 mm/min Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill adjustment vertical 60 mm Spindle motor power 3 kW Mains connection 400 Volt, 50 Hz - CNC path control Heidenhain TNC 124 - Spindle speed in 2 gear ranges and stepless via electronically controlled variator gearbox - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet attached to the machine - Coolant tank with pump positioned alongside - Central lubrication - Lighting Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1300 kg Good condition

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), X-axis: 400 mm, Y-axis: 350 mm, Z-axis: 400 mm, Table dimensions: 650 mm x 350 mm, Tool holder: SK 40, Spindle speed: 1-4000 rpm, Quill stroke: 60 mm, Max. feed rate: 2000 mm/min, Control system: Heidenhain TNC 124, Connected load: 5.5 kW, Dimensions: 2000 mm x 1000 mm x 2100 mm, Weight: 1.8 t. The machine is not operational and repeatedly returns errors: issues with motion monitoring on the Z and Y axes, significant positioning error on the Z axis, malfunctions when moving the control console. The operational readiness relay is missing and the fault is permanently present on startup. After several attempts, referencing is possible. The spindle gearbox is worn out. On-site inspection is possible. Fsdjuqacwopfx Ah Dogh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 2.542 h, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill travel: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Fsdpfew D D Sfex Ah Dogh Motor power: 5.5 kW Weight: 1,920 kg Space requirements: approx. 2,000 x 2,000 x 2,100 mm Total power requirement: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety cabin – LED machine light