Klingelnberg nakup rabljenega (35)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 150 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 230 mm, merilno območje osi Y: 230 mm, merilno območje os Z: 550 mm, teža obdelovanca (maks.): 300 kg, lastna masa: 2.550 kg, TECHNICAL DETAILS Workpiece Data Module Range: min. 0.3 mm - max. 20 mm (0.1 - 20 mm) Helix / Lead Angle: min. 0° - max. 90° Inspection Diameter for Gears Between Centers: max. 400 mm Workpiece Diameter: max. 490 mm Vertical Measuring Range (Z-axis): 550 mm (700 mm) Horizontal Measuring Range / Traversing Path (X-axis): ± 115 mm Permissible Mass Moment of Inertia: max. 5 kg m² Permissible Workpiece Weight: max. 300 kg Center Distance: min. 50 mm - max. 800 mm (50 - 1,000 mm) Chart Recording Magnification: 50x / 100x / 200x / 500x / 1,000x / 2,000x / user-defined Longitudinal Magnification: 0.5x - 1x - 2x - 4x - 5x - 10x - 20x Machine Accuracy VDI/VDE 2612 part 1 and 2 as well as 2613 group I at +18 °C to +22 °C, reference temperature 0.5 K/h; 2 K/d; 2 K/m MPEE0 ISO 10360-2 (2010): 1.8 + L/450 mm VDI2631 Radial Guide Deviation: 0.2 µm Roundness Ø100/L: 0.3 µm Flick 15W/U/L: 1.5 µm Flick 50W/U/L: 1.5 µm Straightness Ø70/L: 0.4 µm Coaxiality: 1.2 µm Total Runout: 1.5 µm Machine Accuracy at +15 °C to +35 °C Reference temperature: 2 K/h; 12 K/d; 2 K/m MPEE0 ISO 10360-2 (2010): 1.8 + L/250 mm VDI2631 Radial Guide Deviation: 0.4 µm Roundness Ø100/L: 0.5 µm Flick 15W/U/L: 1.8 µm Flick 50W/U/L: 1.8 µm Straightness Ø70/L: 0.6 µm Coaxiality: 1.4 µm Flatness Deviation: 1.8 µm Hfsdoxamnrepfx Adrsh Evaluation Software Spur gears – External and Internal Helical Gears up to 60° Standards: DIN 3960 / 3962, free tolerances, AGMA 2015, ANSI B92.1, DIN 5480, ISO 1328:1995, JIS B1702:1998, JIS B1702:2016, GBT 10095:2008, ISO 1328:2013 Functions: Profile and Tooth Flank Line, Tooth Thickness Variation, Tooth Pitch and Two-ball Measurement, Crown, Tapered, Trapezoidal and Bevel Gear Teeth Root and Tip Circle Measurements, Determination of Tip and Root Diameters over up to six teeth or up to four teeth at three measuring heights, or all teeth at one height on a special measurement sheet Gear Measurement Contact Pattern Measurement: 3 x profile and 3 x flank line Topography: 10 profiles x 10 flank lines (30 x 30 grid points) Measurement of all teeth on a separate special measuring sheet Block Gear Measurement: up to 10 gear sets Alignment Measurement: up to six gear sets as well as apex point determination Storage Formats: ASCII format, ASCII mka file, ASCII csv file (grid point deviation) Storage Capacity: up to 5,000 workpiece measurement programs MACHINE DETAILS Net Weight incl. Standard Accessories: approx. 2,150 kg Net Weight with Active Vibration Isolation: approx. 2,550 kg EQUIPMENT - PC with software installed (currently on machine) - Measuring probe and extensions included - 2x calibration spheres - Surface roughness reference standard - 2x 3-jaw chucks for different diameters - 1x measuring arbor for aligning upper and lower measuring tip - Stand for dial gauge - Driver fixture for an extended part spectrum - Transport restraints

Stanje: rabljeno, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and drive technology for noise and contact pattern testing of bevel and hypoid gears. Technical Data Diameter: 540 (400) mm Hypoid: ±50 mm Pinion spindle diameter: 90 mm Dimensions: 1,800 x 1,800 x 1,600 mm Machine weight: approx. 2,800 kg *Specifications and data are non-binding. Subject to prior sale. Special Features: This machine is intended for noise and contact pattern testing of bevel and hypoid gears of all types. By simulating operating conditions, applying different speeds, and changing load conditions for drive and coast sides, the optimal mounting distance for stationary operation can be determined. Hfsdpjxpq Nlofx Adrsh • Digital actual value display for 2 axes • Stepless speed adjustment via frequency converter • Electrically interlocked and removable safety guard • Accessories – wide range of workpiece fixtures • Condition: very good

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, The Klingelnberg PKE 300 H (PSKE 900) bevel gear testing machine was designed as a universal machine for the flexible machining of gears and is used for single-flank rolling tests of bevel gears with evaluation. The image shows the machine in its current condition as a retrofit / modernized version. Technical specifications: - Gear diameter: 450 (300) mm - Axis angle: 90 degrees - Hypoid offset: +/- 60 mm - Footprint approx.: 1.4 x 0.8 x 1.5 m - Machine weight approx.: 1,100 kg Further information on available options and the current purchase price upon request. Hfjdpstncnhsfx Adrjh *All information and schedules are non-binding. Subject to prior sale.

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), Centre distance: 400–800 mm, spindle speed: 1000–2700 rpm, workpiece diameter: 10–300 mm, grinding wheel diameter: 40–300 mm, swiveling range: -45 to 45°, length: 3000 mm, width: 2500 mm, height: 2275 mm, equipped with Hoffmann oil mist separator (new filter inserts), Faudi gravity band filter system, hydraulic unit, additional grinding head for worm wheel grinding, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, circuit diagrams in paper form, inspection is possible. Hsdpfxergahxe Adrofh

Stanje: rabljeno, Plate length 1050 mm Hedpfxou Sbfks Adrsfh Plate width 1050 mm Plate height 60 mm Machine weight approx. 0.2 t Space requirement approx. 1050x1050x0.1 m Clamping plate for a PFSU 1600, Ø 1050 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, TEHNIČNI PODATKI Maks. dolžina vpenjanja: 90 mm Višina vpenjanja orodja s konusnim steblom: 50 mm Višina vpenjanja orodja z ravnim steblom: 45 mm Maks. kot vijačnice: 45° Število vpenjalnih položajev: 1 do 99 Maks. hod sani: 550 mm Maks. premer brusnega koluta: 350 mm Min. premer brusnega koluta: 150 mm Hitrost brusnega koluta (nastavljiva): do 2700 min⁻¹ Območje vrtenja osi brusnega vretena: 0° do 15° Pomik brusne sani (nastavljiv): 0,05 do 16 mm/min (pri 3. in 4. osi: 0,05 do 8 mm/min) Stožec vretena obdelovanca: ISO stožec št. 40 Hedpfjwwkacox Adrsfh Podatki o brusnih kolutih CBN in diamantni skledasti brusni kolut: Ø200 mm → min. DFF: 66 (3. os), 76 (4. os) Ø250 mm → min. DFF: 16 (3. os), 26 (4. os) CBN-ES stožčasti brusni kolut: Ø200 mm → min. DFF: 50 (3. os), 60 (4. os) Ø250 mm → min. DFF: 0 (3. os), 10 (4. os)

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Max. workpiece diameter: 10–350 mm, max. grinding length/width: 690/60 mm, clamping length: 950–1330 mm, swivel angle: -60 to 60°, length: 6200 mm, width: 4000 mm, height: 2500 mm, weight: 9 t, equipped with oil filtration system, oil mist extraction, and additional accessories. Hodpeiph T Hofx Adrsfh

Stanje: dober (rabljeno), Leto izdelave: 2007, Wheel diameter – max. 500 mm Wheel width 200-400 mm Module 12 Speed 0-3,250 rpm Braking torque up to max. 95 Nm Inner taper: Taper #39 Control: Fanuc 16 Total connected load: 15 kW Machine weight approx. 6 t Hjdpovr Hf Ejfx Adrsfh Space requirement approx. 2,350 x 2,240 x 2,500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED, AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear test machine is a CNC inspection machine with three linear axes for fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers a wide range of objective and subjective testing options with speeds up to 3,250 rpm and braking torques up to 95 Nm.

Stanje: dober (rabljeno), Leto izdelave: 2006, Napetost 110 - 230 V Frekvenca 50 - 60 Hz Priključna moč 0,5 kVA Teža 150 kg Prostorske potrebe pribl. 1,0 x 0,8 x 1,75 m Merilna naprava za kontroliranje profila stablnikov - Upravljanje preko PC-krmiljenja z operacijskim sistemom Windows XP - Digitalni ojačevalniki pogona, linearni motorji in merilni sistemi Hsdoymfz Sspfx Adrsfh - Popolnoma avtomatsko določanje položaja rezalnih robov in osi stablnika - Merjenje skoraj vseh posameznih in neprekinjenih postopkov potrebnih stablnikov za spiralne stožčaste zobnike in hipoidne prenose - Koncept stroja zasnovan za najkrajši čas nastavitve in preoblikovanja ter najvišjo merilno natančnost - Kombinirani gumbi za merilno konico in merjenje površine - Integriran predal za dodatno opremo - Tipkovnica integrirana v ploskem predalu - Krmilni elementi in PC zaščiteni pred nepooblaščenim dostopom z zaklepljivim omarnim elementom

Stanje: dober (rabljeno), Leto izdelave: 2002, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Hjdpfxow N S E Ao Adrjfh Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data