Center za precizno merjenje

Klingelnberg P40

TECHNICAL DETAILS

Workpiece Data
Module Range: min. 0.3 mm - max. 20 mm (0.1 - 20 mm)
Helix / Lead Angle: min. 0° - max. 90°
Inspection Diameter for Gears Between Centers: max. 400 mm
Workpiece Diameter: max. 490 mm
Vertical Measuring Range (Z-axis): 550 mm (700 mm)
Horizontal Measuring Range / Traversing Path (X-axis): ± 115 mm
Permissible Mass Moment of Inertia: max. 5 kg m²
Permissible Workpiece Weight: max. 300 kg
Center Distance: min. 50 mm - max. 800 mm (50 - 1,000 mm)

Chart Recording
Magnification: 50x / 100x / 200x / 500x / 1,000x / 2,000x / user-defined
Longitudinal Magnification: 0.5x - 1x - 2x - 4x - 5x - 10x - 20x

Machine Accuracy
VDI/VDE 2612 part 1 and 2 as well as 2613 group I
at +18 °C to +22 °C, reference temperature 0.5 K/h; 2 K/d; 2 K/m
MPEE0 ISO 10360-2 (2010): 1.8 + L/450 mm
VDI2631 Radial Guide Deviation: 0.2 µm
Roundness Ø100/L: 0.3 µm
Flick 15W/U/L: 1.5 µm
Flick 50W/U/L: 1.5 µm
Codpfoxamnrjx Adhorh
Straightness Ø70/L: 0.4 µm
Coaxiality: 1.2 µm
Total Runout: 1.5 µm

Machine Accuracy
at +15 °C to +35 °C
Reference temperature: 2 K/h; 12 K/d; 2 K/m
MPEE0 ISO 10360-2 (2010): 1.8 + L/250 mm
VDI2631 Radial Guide Deviation: 0.4 µm
Roundness Ø100/L: 0.5 µm
Flick 15W/U/L: 1.8 µm
Flick 50W/U/L: 1.8 µm
Straightness Ø70/L: 0.6 µm
Coaxiality: 1.4 µm
Flatness Deviation: 1.8 µm

Evaluation Software
Spur gears – External and Internal Helical Gears up to 60°
Standards: DIN 3960 / 3962, free tolerances, AGMA 2015, ANSI B92.1, DIN 5480, ISO 1328:1995, JIS B1702:1998, JIS B1702:2016, GBT 10095:2008, ISO 1328:2013
Functions: Profile and Tooth Flank Line, Tooth Thickness Variation, Tooth Pitch and Two-ball Measurement, Crown, Tapered, Trapezoidal and Bevel Gear Teeth
Root and Tip Circle Measurements, Determination of Tip and Root Diameters over up to six teeth or up to four teeth at three measuring heights, or all teeth at one height on a special measurement sheet

Gear Measurement
Contact Pattern Measurement: 3 x profile and 3 x flank line
Topography: 10 profiles x 10 flank lines (30 x 30 grid points)
Measurement of all teeth on a separate special measuring sheet
Block Gear Measurement: up to 10 gear sets
Alignment Measurement: up to six gear sets as well as apex point determination
Storage Formats: ASCII format, ASCII mka file, ASCII csv file (grid point deviation)
Storage Capacity: up to 5,000 workpiece measurement programs

MACHINE DETAILS
Net Weight incl. Standard Accessories: approx. 2,150 kg
Net Weight with Active Vibration Isolation: approx. 2,550 kg

EQUIPMENT
- PC with software installed (currently on machine)
- Measuring probe and extensions included
- 2x calibration spheres
- Surface roughness reference standard
- 2x 3-jaw chucks for different diameters
- 1x measuring arbor for aligning upper and lower measuring tip
- Stand for dial gauge
- Driver fixture for an extended part spectrum
- Transport restraints

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.