Deckel Fp nakup rabljenega (692)

Stanje: rabljeno, Leto izdelave: 1987, Deckel FP1 Aktiv s Heidenhain digitalnim prikazovalnikom za 3 osi, 3 aktivne osi, togo mizo, vreteno SK40 S20x2. Centralno mazanje, navodila za uporabo. V dobrem in delujočem stanju, pripravljen za uporabo. Po dogovoru možen prikaz v obratovanju. Dkjdpfx Aozbykwekpst

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, A Deckel FP2 universal tool milling machine, completely overhauled in 2019, is available. Travel range X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Dkedpfx Ajvf Iy Dskpjt

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal tool milling machine Brand: DECKEL Model: FP 2 Year of manufacture: 1976 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine number: 6976 with warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) Dkjdpfx Aed Tytyokpjt - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual -Used, as seen-

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2201-5046, Dobro stanje z različnimi držali orodij. SK40 - S20 Heidenhain Aktivsteuerung upravljanje Avtomatski pomiki na vseh oseh. Djdsy Al Tnspfx Akpekt 4. os je krmiljena.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 150 mm, pomik po osi Z: 340 mm, poteza s peresom: 80 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, dolžina mize: 210 mm, širina mize: 600 mm, skupna višina: 1.750 mm, skupna dolžina: 1.400 mm, skupna širina: 1.600 mm, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, skupna masa: 850 kg, obremenitev mize: 200 kg, trajanje garancije: 3 meseci, Stroj bol v roku 2026 nami dielňou kompletne/čiastočne repasovaný a je vo výbornom stave. Počas čiastočnej repasácie bol nainštalovaný nový brzdový motor. Ovládanie 3-osové aktívne digitálne odčítavanie HEIDENHAIN TNC 113 Otáčky 40–2000 ot./min, geometricky stupňovaná priama prevodovka s 18 rýchlostnými stupňami pre maximálny krútiaci moment/frézovací výkon Posuv 5 až 500 mm/min, plynulo nastaviteľný Rýchloposuv 1,2 m/min Pinola Výsuvná pinola, vertikálne 80 mm, SK40 s upínacím závitom M16, voliteľne: so závitom na pílu DECKEL S20 x 2 Výsuvná pinola horizontálne cca 100 mm Osi X/Y/Z 300/150/340 mm Stôl Pevný uhlový stôl 600 x 210 mm Maximálne zaťaženie stola 200 kg Vybavenie • Vertikálne a horizontálne vreteno • Frézovacia hlava manuálne naklápateľná +/- 90° • Harmonikový kryt osi Z Voliteľné príslušenstvo • Vanička na triesky • Pracovné osvetlenie • Univerzálny stôl • Otočný stôl • Dlabací nadstavec • Deliaca hlava • Protiľahlý držiak • atď. Dsdpfx Akjyi Amwspokt

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm Dksdeu Dm E Hopfx Akpst • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vrtenja: 2.500 obr/min, vrtljajska hitrost (min.): 50 obr/min, vhodna napetost: 400 V, Deckel FP4M univerzalni rezkalni stroj v tehnično in optično odličnem stanju. Serijska št.: 2203-1389 Leto izdelave: 1984. Tehnične specifikacije: - Delovni hod X/Y/Z: 500/400/400 mm - Območje vrtljajev: 50 - 2500 obr/min - Moč: 3,7 / 4,4 kW Dsdpfx Ajytb Uhjkpokt - Vretena zavora - Avtomatski pomik: X-Y-Z brezstopenjsko nastavljiv 6,3 / 630 mm/min - Hitropomik X-Y-Z 1300 mm/min - Fiksna kotna miza - Vertikalna pinola, hod 90 mm - Oznaka ISO 40/M16 - Teža cca 1500 kg Možnosti stroja: - 3-osni digitalni odčitek Heidenhain - Sistem za hlajenje - Posoda za odrezke - Centralno mazanje - Avtomatsko impulzno mazanje glave rezkala - Knjige s prikazom rezervnih delov in električnimi shemami - Omarica z dodatno opremo, glejte fotografije

Stanje: dober (rabljeno), Please read the technical specifications carefully. If you consider this machine as a potential investment, we kindly request your full identification including a correct telephone number and email address when submitting an offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed, X/Z-axis: 5 – 500 mm/min Feed rate adjustment: stepless Rapid traverse X/Z-axis: 1,200 mm/min Feed, Y-axis: manual Dodpfx Akjxyc Tkopjkt Fixed angle table: 600 x 210 mm Tilting vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change without notice! Features: - For horizontal machining, the milling head is swivelled 90 degrees and pushed back. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z-axis - The machine was partially overhauled by a specialist company several years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro-cooling/lubrication system - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: Good to very good, from a training facility Available from March 2026

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Interna št. artikla: 26007 Univerzalni rezkalni stroj Deckel FP1 Pomiki: X300 / Y160 / Z340 mm Pomik pinole: 60 mm Priključna moč: 1,9 kW Dkedpfx Akjzb Ni Ajpot Število hitrosti vretena: 16 Območje vrtljajev: 40–2000 vrt/min Vpenjanje orodja: SK40 Pomik: brezstopenjsko 5–500 mm/min Hitri pomik ne deluje! Stroj je izobraževalnega izvora in je lepo ohranjen. Z veseljem vam stroj pod napetostjo pokažemo v naši ogrevani skladiščni hali na več kot 500 m².

Leto izdelave: 1982, stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Brand: DECKEL Model: FP 3 Aktiv Year of manufacture: 1982 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Dsdspn Rgvepfx Akpskt RAL5008 grey-blue Machine no.: 2201-5539 with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread M16 - Central lubrication, manually operated - Coolant system - Operating manual Used, as seen The machine corresponds technically to the standard of its year of manufacture.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1986, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 600 mm, skupna masa: 6.000 kg, Heidenhain TNC 426 Univerzalna miza 900x700 mm Dkjdpfxeyt Nxuo Akpot Hodi 850x700x600 mm Maksimalna hitrost vretena 6000 vrt/min Teža 6000 kg

Stanje: rabljeno, Universal tool milling machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 - Year of manufacture: 1979 Manual travel X: 300 mm | Y: 160 mm | Z: 330 mm Table size: 600 x 210 mm Spindle mounting: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed on X and Y axes: 5 to 500 mm/min. Rapid traverse: 1200 mm/min. Motor power: 1.5 and 1.9 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Infinitely variable feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill travel on the vertical milling head: 60 mm - Vertical milling head tiltable and extendable horizontally by 100 mm - Fixed angle table, 600 x 210 mm - Coolant system integrated in the machine base - Separate control cabinet included - Original chip tray for installation on machine base - Electrical diagrams included Required space (L x W x H): 1350 x 1100 x 1700 mm Dkedpfx Akor U St Uepot Weight: 770 kg Good condition

Stanje: dober (rabljeno), 1 used universal tool milling machine Make: Deckel Model: FP 1 Year of manufacture: 1982 Technical specifications: X-axis travel: 300 mm Y-axis travel: 160 mm Djdpfx Aksrn I Rzspokt Z-axis travel: 340 mm Spindle taper: SK 40 Table size: 600 x 210 mm Spindle speeds: 40–2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m

Stanje: rabljeno, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 – Year of manufacture 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Doder D T U Dspfx Akpekt Feed on X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 and 1.8 kW (pole-changeable) Power connection: 380 Volt, 50 Hz - Stepless feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill feed at vertical milling head: 60 mm - Vertical milling head swivelable and extendable horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Separate control cabinet - Original chip tray to be mounted on the machine base - Electrical diagram available Required space (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 770 kg Very good condition

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Dedpfex It Rxex Akpskt Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Djdpfxox S Edle Akpjkt Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: rabljeno, Fraiseuse universelle à outils avec afficheur digital actif DECKEL Type FP 1 Fraiseuse universelle N° de machine 2102 - 3322 Année de fabrication 1986 Courses de déplacement X : 300 mm Y : 150 mm Z : 330 mm Table 600 x 210 mm Cône de broche SK 40 - S20x2 Vitesse de broche 40-2000 tr/min, 16 positions Avance 5 à 500 mm/min. Avance rapide 1200 mm/min. Puissance moteur 1,6 et 2 kW, commutable par enroulements Alimentation 380 Volt, 50 Hz - Affichage digital actif pour 3 axes HEIDENHAIN type TNC 113 - Avance continue sur les axes X, Y et Z - Vitesse de broche par 2 vitesses moteur et 8 plages de vitesses - Déplacement du fourreau de la tête de fraisage verticale 60 mm - Tête de fraisage verticale orientable et extensible horizontalement de 100 mm - Table angulaire fixe 600 x 210 mm - Système de réfrigération intégré dans le socle machine - Armoire électrique séparée - Bac à copeaux d'origine pour montage sur le socle machine - Manuel d'utilisation, schéma électrique, plan des pièces détachées disponibles Dimensions L x l x H 1350 x 1100 x 1700 mm Dodpfx Ajr D T Uyjkpskt Poids 830 kg Bon état

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 700 mm, pomik po osi Z: 550 mm, poteza s peresom: 80 mm, skupna masa: 3.900 kg, Brez minimalne cene – zagotovljen nakup po najvišji ponudbi! TEHNIČNE PODROBNOSTI Potovanje osi X: 800 mm Potovanje osi Y: 700 mm Potovanje osi Z: 550 mm Vertikalni hod vretena: 80 mm PODROBNOSTI O STROJU Dodpjzpwxyjfx Akpskt Masa stroja: 3.900 kg OPREMA Okrogla miza

Leto izdelave: 1981, stanje: rabljeno, Manufacturer: Deckel Model: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal travel (X-axis): 700 mm Cross travel (Y-axis): 400 mm Vertical travel (Z-axis): 450 mm Spindle overhang: 50–450 mm Dodjihp U Dspfx Akpekt Spindle taper: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5–1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5–1600 rpm Machine weight: 2000 kg Feed rates X/Y/Z axes: 18 steps, 10–500 mm/min Accessories: Milling head with quill Table size: 1000 x 470 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1978, Universal tool milling machine Make: DECKEL Model: FP 1 with infinitely variable feed Year of manufacture: approx. 1975 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty Dkedpfx Aedf E H Askpst Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 250 mm (T-slot: 12 mm) - Vertical milling head ISO 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual - used, as seen -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed - Excellent Condition Technical Data: >> Year of manufacture: 1983 | Machine no.: 2201-5919 >> Fixed angle table (refurbished) >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head adjustable by 200 mm on column >> Vertical and horizontal quill – SK40 retractable >> Drawbar system: S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the Machine: Dkjdey D Tl Iopfx Akpot For sale is a Deckel FP3 universal milling machine in very good condition. The machine has minimal backlash, and all spindles move smoothly. On this later FP3 model, the feed rate can be infinitely adjusted on all three axes, plus there is a rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With this Heidenhain CNC control, you can input target dimensions and the machine will move to position automatically. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with 3-Axis Active Heidenhain Digital Display and Stepless Feed – Excellent Original Condition Technical Data: - Year of manufacture: 1982 - Machine no.: 2201-5527 - Swiveling, tilting, and rotating table - Spindle speeds: 25 – 2500 rpm - Stepless feed in 3 axes - Rapid traverse in 3 axes - Drive power: 2.0 / 4.0 kW - Spindle brake - Travel (X/Y/Z): 500 / 300 / 400 mm - Vertical milling head can be shifted 200 mm along the column - Extendable vertical and horizontal quill – SK40 - Drawbar system: M16 - Weight approx. 1,500 kg Equipment and Accessories: - 3-axis active digital display Heidenhain TNC113 - Coolant system - Central lubrication Dkedpfx Aksy Eqkzjpjt About the machine: Offered here is a Deckel FP3 universal milling machine in very good original condition. The machine has minimal backlash and all spindles move smoothly. On this newer FP3 model, feed is steplessly adjustable in all three axes. Additionally, the machine features rapid traverse on each axis. A major advantage is the active 3-axis digital display. With this Heidenhain control, you can enter dimensions that the machine then automatically moves to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. You are welcome to view and test the machine under power on site. The machine is available immediately.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-10147 with warranty Geometric acceptance with inspection protocol Accessories: Dkodpfx Aofcqfpokpet - 3-axis digital readout HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, manual - Coolant system - Operating manual - used, as seen -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, DECKEL FP4M – univerzalni strojni mlin (1984) Serijska številka: 2203-1545 Nadzorni sistem: HEIDENHAIN POSITIP 855 Dkedpfxjzmhlfs Akpet Hodi: Os X: 500 mm Os Y: 400 mm Os Z: 400 mm Hitri pomik: 1300 mm/min Pomik: 8 – 630 mm/min Dimenzije mize: približno 800 x 460 mm Maksimalna obremenitev mize: približno 600 kg Območje vrtljajev vretena: 50 – 2500 vrt/min Vpenjalna glava za orodje: SK40 Brez strojne primealke.

Stanje: rabljeno, Stroj za obdelavo s frezalno glavo Deckel FP1 Lokacija: Bad Tölz Ogled je možen. Dkjdpfx Ajzv Sm Sekpjt Na voljo so še druge rabljene stroje. Stopite v stik z nami.