Deckel Fp 50 Cc nakup rabljenega (676)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, O F F E R We can offer you, without obligation and subject to prior sale, the following from stock: DECKEL Universal Tool Milling Machine Type FP 2 Year of Manufacture ca. 1975 _____ Table travel: longitudinal motor/manual 390 / 400 mm vertical motor/manual 390 / 400 mm cross motor/manual 190 / 200 mm Fixed angle table 250 x 700 mm Installation height under spindle 400 mm Spindle overhang (quill travel) approx. 165–465 mm Spindle taper SK 40 18 spindle speeds 40–2,000 rpm Infinitely variable feed rate 5–400 mm/min Rapid traverse 1,200 mm/min Spindle drive 2.2 kW Total drive power 2.5 kW - 380 V - 50 Hz Weight 1,000 kg Accessories / Special Equipment Ksdpfxsxzk Iro Ah Ajfa • DECKEL universal swivelling angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with separate drive • Large original DECKEL tool cabinet for storing the above accessories and various arbors, approx. 30 assorted collets, various milling tools, several arbors, etc., as well as operating tools, separate control cabinet, coolant system Condition : very good – demonstration-ready, ideal for training workshops/education Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice Constantly available: further DECKEL FP 1 / FP 2 / FP 4 milling machines and, of course, additional accessories such as spiral milling attachments also in stock

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Kfsdpfjpy Eldex Ah Asa Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: dober (rabljeno), Dimensions: Width 2000 mm, Depth 2000 mm, Height 1600 mm Table: 620 mm x 390 mm Machine weight: approx. 1500 kg Control: Dialog 4 Kjdpeu A Iuysfx Ah Aefa Equipment: backlash-free ball screw drives, hydraulically actuated SK40 tool holder, electronic handwheel

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, CNC - univerzalna obdelovalna centra DECKEL MAHO - DMU 50 T Leto izdelave: 2003 x-hod: 500 mm y-hod: 400 mm z-hod: 400 mm Krmiljenje: Siemens 810 D Obseg vrtljajev - glavno vreteno: 20 - 9.000 min⁻¹ Pogonska moč - glavno vreteno: 9 / 13 kW Vpenjalni stožec: ISO 40 DIN 69871 Velikost mize: 700 x 500 mm Nagibna os B: 105° (-10°/+95°), ročno Zavrtenje 360° ročno Maks. obremenitev mize: 200 kg Število T-utorov: 7 Razmak T-utorov: 63 mm Širina T-utorov: 14H7 mm Centrirna izvrtina: 30H7 mm Število mest za orodja: 16 Vpenjalo orodja: ISO 40 DIN 69871 Maks. dolžina orodja: 290 mm Maks. teža orodja: 6,0 kg Maks. skupna masa: 50 kg Maks. podajalna hitrost: 10.000 mm/min Kodpfsx Auvvex Ah Asfa Hitri pomik: 12 m/min Natančnost vnosa: 0,01 mm Skupna priključna moč: 17 kW Teža stroja pribl.: 3,2 t Dimenzije stroja (D x Š x V): pribl. 4,0 x 4,0 x 2,5 m - 5 osi (3 + 2) - Nagibna rotacijska miza z indikatorjem kota (osi B+C ročno s ročnim kolesom) Na voljo takoj. Vključno z držali za orodja in sistemom za vpenjanje na ničelni točki.

Stanje: dober (rabljeno), Leto izdelave: 1986, CNC universal milling machine Manufacturer: DECKEL, Model: FP5NC, Year: 1986, Control: DIALOG 4 Parts only. Please inquire specifying exactly which parts you need. Kfsdpfxjdtdahs Ah Aoa

Stanje: pripravljen za uporabo (rabljen), Travel distances: 300 x 150 x 340 mm Universal table: 600 x 260 mm Spindle mount: ISO 40 Kjdpfjdr E Apjx Ah Aefa Spindle speeds: 40–2000 rpm Digital readout Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout AXESTA, including 2 accessory cabinets, from university environment, in excellent condition Technical Data: >> Machine No. 0494 >> 3-axis digital readout AXESTA >> Swiveling, tilting and rotating table >> Spindle speeds: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel path X/Y/Z: 500/300/400 mm >> Equipment: vertical and horizontal spindle >> Extensible vertical and horizontal quill – SK-40 >> Drawbar system S20x2 >> Weight: approx. 1,300 kg Accessories and Equipment: >> 3-axis digital readout AXESTA >> Coolant system >> Centralized lubrication 2 accessory cabinets including: - Collets - Horizontal and vertical tool holders - Clamping tool Kfodsxxzl Nepfx Ah Aja - Dividing head with 3-jaw chuck - Machine vice - Counter-support - Faceplate - Additional small rotary/tilting/turning table - Rotary table - Counter-support - Machine vice and much more About the machine: Offered for sale is a Deckel FP3 universal milling machine in excellent condition. All spindles move easily. The machine comes with 2 tool cabinets including a comprehensive set of accessories. Previously located at a university. Oil change performed. Mechanically and electrically tested. The digital readout allows for easier and more precise work. Take the opportunity to inspect and test-run the Deckel on site under power.

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 23.816 h, Funkcionalnost: popolnoma funkcionalen, Pomiki (XYZ): 850x560x510 mm, največja hitrost vretena: 12.000 min⁻¹, menjalec orodij za 60 mest, SK40, krmiljenje: SIEMENS 840D, 1 transporter za ostružke notranji dovod hladilne tekočine OPOMBA: Ksdsxuqlkspfx Ah Asfa Nudimo prilagodljive finančne rešitve za vse stroje in profesionalno storitev selitve. Demontaža, transport in strokovna montaža – vse na enem mestu. Obračun glede na individualne pogoje in trajanje. Za osebno ponudbo nas kontaktirajte.

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Osi: 5, hod X/Y/Z: 500mm/400mm/400mm, število obratov: 9000 obr/min, moč vretena: 9kW/13kW, število orodnih mest: 16, največja dolžina orodja: 290mm, največja teža orodja: 6kg, največja obremenitev mize: 200kg, podajalna hitrost: 10m/min, hitro pomikanje: 12m/min. Dimenzije stroja X/Y/Z: pribl. 4500mm/4000mm/2500mm, teža: pribl. 3400kg, krmilje: Heidenhain MillPlus, delovne ure: 34724h, ure vretena: 6490h. Ena izmed upravljalnih tipk stroja je v okvari in orodje se občasno ne iztisne. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Stroj je bil uporabljen v izobraževalne namene. Kfjdpox Aupisfx Ah Aea

Stanje: rabljeno, skupna višina: 1.900 mm, skupna širina: 1.250 mm, skupna dolžina: 1.700 mm, Poids à vide : 1 500 kg - Documentation disponible : Oui Ksdpfx Ahex Aq Nxj Asfa - Certificat CE : Non - Numéro de série : 5965 - Commande : Conventionnelle - Horizontal/Vertical : Horizontal - Nombre d’axes [pcs] : 3 - Course axe X [mm] : 400 - Course axe Y [mm] : 200 - Course axe Z [mm] : 400 - Longueur de table [mm] : 800 - Largeur de table [mm] : 330 - Porte-outil : SK40 - Puissance broche principale [kW] : 2,2 - Vitesse de broche min. [tr/min] : 40 - Vitesse de broche max. [tr/min] : 2 000 - Options : Affichage numérique - Type d’affichage numérique : Heidenhain - Dimensions de transport : 1 700 mm x 1 250 mm x 1 900 mm (L x l x h) - Poids transport [kg] : 1 500 kg - Colis de transport [pcs] : 2 Informations financières TVA : Prix hors TVA TVA/régime de la marge : TVA récupérable pour professionnels Livraison et reprise possibles à tout moment pour tout matériel industriel Lukas van Rossum

Leto izdelave: 1990, Stanje: dober (rabljeno), Various collets and holders, approx. 300 pieces. For DECKEL milling machines FP1, FP2, FP3, FP4. Individual sale upon request. Kjdpfx Aehvz Iioh Asfa

Stanje: dober (rabljeno), Leto izdelave: 1979, Deckel FP2 s brezstopenjsko regulacijo, orodna rezkalna stroja. Stroj je v dobrem stanju, tog namizje, SK 40 vpenjalni vreteno, pribor: razne napenjalne tule in držala rezk. V dobrem, delujočem stanju. Po dogovoru je možen prikaz pod napetostjo. Kfodpfx Ajxzn Hlsh Aoa

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: transportni trak za ostružke, Universal Milling Machine Deckel Maho DMU 50T with Heidenhain TNC 426 / 430 Control and Chip Conveyor Technical Data: >> Year of manufacture: 2000 >> Heidenhain control: TNC 426 / 430 >> Travel X500/Y400/Z400 >> C and B axes manually adjustable with digital readout >> Working spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder: SK40 >> Feed rate X, Y, Z - 10,000 mm/min Rapid traverse X, Y, Z: 12 m/min >> Tool magazine: Number of tools: 16 >> Table Ø700x500 mm >> Swivel range +95° / -10° >> Dimensions and weight: Dimensions: 2,200 x 4,000 x 2,450 mm Weight: approx. 3,500 kg >> Coolant system >> Power connection: 400V, 17 kVA Kedpovyr N Sjfx Ah Aofa About the machine: For sale is a Deckel Maho DMU 50T universal milling machine equipped with a Heidenhain TNC 426/430 control, in very good condition. The table can be adjusted manually (digitally) via two additional axes (B and C). The machine runs smoothly and with high precision. The DMU 50T includes a chip conveyor. You are welcome to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel Maho DMU 50M with Heidenhain TNC 124 Path Control – Excellent Condition! Technical Data: >> Year of manufacture: 1998 >> Heidenhain TNC 124 control system >> Travel: X500/Y400/Z400 mm >> C and B axis, manual adjustment with digital readout >> Spindle speed: 20–4500 rpm >> Feed rate: 5000 mm/min >> Rapid traverse: 5 m/min >> Tool holder: SK 40 >> Table dimensions: Ø700 x 500 mm >> Swivel range: +95° / -10° Kedjr Hbf Topfx Ah Aofa >> Electronic handwheel >> Weight: 2800 kg >> Machine footprint: approx. 4.0 m x 2.5 m, height 2.6 m >> Coolant system >> Power connection: 400V, 32A About the machine: For sale is a Universal Milling Machine Deckel Maho DMU 50M equipped with Heidenhain TNC 124 path control, in very good condition. The table has two additional axes (B and C), adjustable manually with digital display. The control system is very user-friendly, supporting position input and approach, deep and thread drilling, drilling patterns, hole circles, hole rows, and rectangular pocket milling. Programs can be entered and read via an interface. The Heidenhain path control facilitates easier and even more precise operation. The milling machine was used for training purposes in a large company. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel Maho DMU 50M with Heidenhain TNC 124 Contour Control – Excellent Condition! Kedpjr Hbf Eofx Ah Asfa Technical specifications: >> Year of manufacture: 1998 >> Heidenhain TNC 124 Control >> Travel (X/Y/Z): 500/400/400 mm >> C and B axes manually adjustable with digital readout >> Spindle speed: 20 - 4,500 rpm >> Feed rate: 5,000 mm/min >> Rapid traverse: 5 m/min >> Tool holder: SK 40 >> Table size: Ø700 x 500 mm >> Swivel range: +95° / -10° >> Electronic handwheel >> Weight: 2,800 kg >> Machine footprint: approx. 4.0 m x 2.5 m, height 2.6 m >> Coolant system >> Power supply: 400 V, 32 A About the machine: For sale: a universal milling machine Deckel Maho DMU 50M equipped with Heidenhain TNC 124 contouring control, in excellent condition. The table can be manually (digitally) adjusted in two additional axes, B and C. The control system is very user-friendly: it allows input and approach of positions, deep and thread drilling, drilling patterns, hole circles, line boring, and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain contouring control makes operation easier and even more precise. The milling machine was previously used in a large company for training purposes. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, EXCELLENT CONDITION Technical Data: >> Year of manufacture: 1990 Machine No. 2102-5046 >> Fixed angular table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes Kfodpfx Aju Um Erjh Asa >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle support >> Vertical and horizontal quill - SK40 taper >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Coolant system >> Operating manual, spare parts list Additional information about the machine: Offered is a Deckel FP1 universal milling machine, year 1990, in very good condition. The machine has very little backlash on the handwheels and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed for all three axes is infinitely variable, and the machine is also equipped with rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain controller, you can enter dimensions which the machine will move to automatically. The FP1 was previously used in a training shop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this excellent machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis K&C Digital Readout (new) and stepless feed on 3 axes – Excellent Condition Technical Data: Ksdpfxetwlwzj Ah Asfa >> Year of manufacture: 1983 Machine No.: 2102-2444 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout (K+C) newly installed, manufacturer’s warranty and manual included. Display features: set reference points, zero points, enter coordinates, mm/inch conversion, absolute/incremental coordinates, circle functions, hole array, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a universal milling machine Deckel FP1, built in 1983, in excellent condition. The machine has very little backlash, and all leadscrews move smoothly. Even at maximum speed, the milling machine runs quietly. On this newer FP1 model, the feed is continuously variable on all three axes, plus rapid traverse is available in all axes. The FP1 was located in a training workshop and used only occasionally. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test this gem on site under power.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 in Special Light Grey Paint with New 3-Axis K+C Digital Display Technical Data: • Mach. No. 5983, Year of manufacture approx. 1975 • Rigid angle table (newly refurbished) • Speed range: 40 - 2000 rpm • Feed and rapid traverse on 3 axes • Drive power: 2.2 kW Kjdpfx Ahju I Rm No Asfa • Travel X/Y/Z: 400/200/400 mm • Equipment: Vertical & horizontal spindle • Extendable vertical and horizontal quill - SK-40 taper • Drawbar system: S20x2 • Weight approx. 1,100 kg Accessories and Features: • 3-axis K+C digital readout, newly installed with manufacturer's warranty Display features: set reference points, set zero points, input coordinates, switch mm/inch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. • User manual for digital readout • Coolant system About the machine: For sale is a Deckel FP2 universal milling machine in good condition. The Deckel has very little backlash and all spindles move smoothly. The machine has been completely dismantled and newly painted. An oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes work easier and even more precise. Additionally, you receive a 1-year warranty on the new digital readout. Take the opportunity to view and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ksdpfx Aju Nvxmeh Ajfa Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm Kfedjt Aav Iopfx Ah Aja >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Kfodpfxot Aarpe Ah Aoa Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 Kfjdpjvb Ud Uefx Ah Aoa >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 Ksdpju Racrefx Ah Aefa >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) Kfodpfx Aju T D Nreh Asa >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm Kfodpfx Aju Nvwvoh Aja - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.