Deckel Fp 50 Cc nakup rabljenega (697)

Stanje: dober (rabljeno), Leto izdelave: 2001, MACHINE SPECIFICATIONS Control System: HEIDENHAIN Machining Area: X-axis travel: 500 mm Pgodpfx Asxq Hb Teafou Y-axis travel: 420 mm Z-axis travel: 380 mm Main Drive: Spindle speed range: 20 – 18,000 rpm Power (40/100% duty cycle): 35/25 kW Torque (40/100% duty cycle): 130/87 Nm Feeds: Working feed (X/Y/Z): 20 – 20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work Table (B+C Axes): Table dimensions: Ø 500 x 380 mm Maximum table load: 200 kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360° (resolution 0.001°) B-axis travel: 180° (resolution 0.001°) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2,470 mm Machine weight: 5,020 kg Taper: Taper type: SK 40 (DIN 69871 A) Electrical Connection: Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Through-spindle coolant Automatic tool changer: ATC-32 - Max. tool weight / Max. tool diameter: 6 kg / 200 mm Chip conveyor Electronic handwheel: HR-410 High-capacity cooling system: Interlit SUK-200-900 Equipped with Renishaw probe interface: probe included

Stanje: dober (rabljeno), Leto izdelave: 1986, 1 rabljeni univerzalni orodni rezkalni stroj Proizvajalec: Deckel Tip: FP 1 z aktivnim digitalnim prikazovalnikom Heidenhain Tehnični podatki: X-pomik: 300 mm Y-pomik: 160 mm Z-pomik: 340 mm Vpenjalni konus: SK 40 Velikost mize: 600x210 mm Hitrosti vretena: 40–2000 min⁻¹ Teža stroja pribl.: 1 t Pedpfx Aajwuu Sdjfjgu Prostorska zahteva pribl.: 1,6x1,3x1,8 m

Stanje: rabljeno, Universal Milling Machine DECKEL Type FP 1 Podpfx Aodzqb Sjafjgu Machine No. 52185 Year of manufacture: 1968 Travel range X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 steps Motor power 1.0 and 1.4 kW, pole-switchable Power supply 380 Volt, 50 Hz - Powered feed on X and Z axes - Two motor speeds and 8 gear stages - Quill travel on vertical milling head 60 mm - Fixed angle table - Coolant system integrated in machine base - Separate control cabinet - Support bracket with counter bearing for horizontal milling SK 40 Required floor space (L x W x H): 1200 x 1100 x 1600 mm Weight approx. 1000 kg In very good condition

Stanje: dober (rabljeno), DECKEL - FP2 with New Three-Axis Digital Readout from Educational Facility - Well-maintained original condition - Travel X/Y/Z: 400x200x400mm - 3-axis digital readout "NEW" - Swivel table – clamping surface 700x350mm - Speed range: 40–2000 rpm - Automatic feeds on all three axes - Rapid traverse on all three axes Pjdewtbq Dspfx Aafsgu - Tool holder: ISO 40 - Vertical and horizontal milling setup - Swiveling vertical head with quill - Coolant system - Spindle nut X-axis "NEW" - Machine feet - Machine vice "RÖHM" - Various tool holders - Chip pan / machine base - Documentation included Dimensions: LxWxH: 1.5 x 1.7 x 1.8 meters / Weight: 1500 kg Errors and omissions excepted.

Stanje: rabljeno, x-travel 500 mm y-travel 400 mm z-travel 400 mm Pedpjv Td Elefx Aafegu

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 53.776 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 380 mm, premer vrtljive mize: 500 mm, največja hitrost vrtenja: 18.000 obr/min, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 2000 Control: MillPlus Operating hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping table diameter: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 positions Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Pgjdpjwxd Agsfx Aafsu Transport and loading can be organized throughout Europe at an additional cost, if required. Prices are plus VAT. Viewing by appointment possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or would you like to sell your machine? For further information or contact options, please visit our website.

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 500mm/400mm/400mm, Spindle speed: 9,000 rpm, Spindle power: 9kW/13kW, Tool holder: SK40, Feed rate X/Y/Z: 10m/min, Rapid traverse X/Y/Z: 12m/min. Table dimensions X/Y: 700mm/500mm, Max. table load: 200kg, Number of T-slots: 7, T-slot spacing: 63mm. Tool stations: 16, Max. tool length: 290mm, Max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/2200mm/2500mm, Weight: approx. 3500kg, Control: MillPlus. Documentation available. Inspection on site is possible. Pgedpfx Asu T Riloafou

Stanje: dober (rabljeno), 1 rabljeni univerzalni orodni rezkalni stroj Znamka: Deckel Tip: FP 2 Digitalni prikazovalnik: 3-osni aktivni digitalni prikazovalnik HEIDENHAIN Pomik X-os: 400 mm Pomik Y-os: 220 mm Pomik Z-os: 400 mm Vpenjalni sistem orodja: SK 40, izvlečni navoj S 20 x 2 Tip rezkalne glave: vertikalna rezkalna glava Območje vrtljajev: 25–2.500 min⁻¹, 21 stopenj Tip mize: fiksna miza Psdswuu Raopfx Aafsgu Uporabna površina mize: 700 x 280 mm T-utor: 12 mm Teža: pribl. 1.400 kg Dimenzije: pribl. 1.600 x 1.350 x 1.800 mm Dodatki: Aktivna funkcija v X-, Y- in Z-osi Hladilna naprava Centralno mazanje, ročno upravljanje Navodila za uporabo

Stanje: rabljeno, Universal tool milling machine DECKEL type FP 1 Machine No. 28317 Year of manufacture: approx. 1960 Travels X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Horizontal spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 0.8 and 1.1 kW, pole-changing Power supply 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gearbox steps - Feed on X and Z axes - Coolant system with mechanical pump integrated in the machine base Pgedpfjiy Ekvex Aafou - Quill travel on the vertical milling head 60 mm - Vertical milling head swivels +/- 90° - Metal base made of angle iron with machine feet Space required (L x W x H): 1100 x 900 x 1650 mm Weight: 650 kg In good condition

Stanje: dober (rabljeno), Orodjarski rezkalni stroj DECKEL FP 1 - Hodi X/Y/Z: 245x150x340 mm - Fiksna kotna miza: 600x210 mm - Vpenjalni stožec: MK 4 Pjdpfsw I Ty Sex Aafegu - Sprejem za napenjalne tule z vključenim kompletom napenjalnih tulcev - Območje vrtljajev: 95–1900 obr/min / 12 stopenj - Pomiki osi X in Z - Horizontalna/vertikalna rezkalna naprava - Pomik pinole navpične rezkalne glave cca 60 mm - Navpična rezkalna glava nagibna +/- 90° - Noge stroja - Razno orodje – glejte slike - Dokumentacija Dimenzije: D x Š x V: 1,1 x 0,9 x 1,7 m / Teža 650 kg Možne napake in spremembe podatkov.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 24.128 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 530 mm, pomik osi Y: 380 mm, pomik po osi Z: 380 mm, največja hitrost vrtenja: 8.000 obr/min, število mest v zalogovniku orodij: 24, kot vrtenja osi B (max.): 180 °, kot vrtenja osi C (maks.): 360 °, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control system: Heidenhain Millplus Spindle speed: 8,000 rpm Power: 15 kW Torque: 130 Nm Tool holder: SK40 NC rotary tilt table B-axis: 180°, 16 rpm C-axis: 360°, 18 rpm Clamping surface: Ø500 × 380 mm Max. table load: 200 kg T-slot spacing/size: 63 / 14 H7 mm Centering bore: Ø30 H7 mm Max. torque (rotary axis): 1,000 Nm Max. table plate rotation (rotary axis): 18 rpm Max. tilting moment: 1,100 Nm Swivel speed: 16 rpm Travel and measurement Rapid traverse in X/Y/Z axis: 30 m/min Position feedback system: Direct in X/Y/Z (glass scales) Tool magazine Tool magazine: 24 stations Max. tool length from spindle nose: 280 mm Max. tool weight for automatic tool change: 6 kg Max. total tool weight in magazine: 80 kg Required compressed air: approx. 5.5 – 8.0 bar Compressed air consumption: approx. 7 m³/h Chip management Chip management: chip tray Pgjdsv Tp Dmjpfx Aafju MACHINE DETAILS Operating hours: 58,886 h Spindle hours: 24,128 h Weight: 4,400 kg Installation dimensions: 5.2 x 4.0 x 3.1 m (without peripherals) Transport dimensions: 2.45 x 1.76 x 3.38 m, 3.5 t The zero-point clamping plate on the working table is not included in the scope of delivery.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2102-2783, Deckel FP 1 Aktiv milling machine with Heidenhain TNC113 digital readout in very good condition. Technical specifications: * Year of manufacture: 1985, Machine No. 2102-2783 * Rotary/swivel tilting table * Spindle speed: 40 - 2000 rpm * Infinitely variable feed in 3 axes * Rapid traverse in 3 axes * Spindle brake Pgedpop Sqyuefx Aafeu * Travel X/Y/Z: 300/160/340 mm * Vertical milling head can be shifted 100 mm on spindle carrier * Vertical quill * Tool clamping system: SK40/S20x2 * Weight approx. 800 kg Accessories and equipment: * 3-axis digital readout Heidenhain TNC113 * Coolant system * Central lubrication * Operating manual, spare parts list The Deckel FP 1 Aktiv milling machine offered is in very good condition. All spindles move smoothly and have minimal backlash. All guides have been disassembled, checked, and are in as-new condition. The machine runs very quietly at all speeds. All bellows, scrapers, roller shutters, etc., are in very good or new condition, and an oil change has been performed. Mechanically and electrically fully inspected. You are warmly invited to view and test this machine and see for yourself the like-new condition.

Leto izdelave: 2019, Stanje: pripravljen za uporabo (rabljen), A Deckel FP2 universal tool milling machine, completely overhauled in 2019, is available. Travel range X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Pjdpfx Aasvf Iy Djfjgu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control, Excellent Condition Technical Data: >> Year of manufacture: 2006 >> Heidenhain controller, type iTNC 530 >> Travel ranges X500/Y450/Z400 mm >> C-axis: 360 degrees Pedpfxevyr Tds Aafogu >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feedrate infinitely programmable up to X, Y, Z 20,000 mm/min C/B axis infinitely programmable up to rapid traverse speed >> Rapid traverse Y-Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 magazine positions >> Table clamping surface Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load capacity: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Heidenhain electronic handwheel HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> Through-spindle coolant (IKZ) 40 bar >> Coolant filtration system (fleece filter unit) >> Rinse gun >> Visiport >> Sealing air on measuring system >> Prepared for robotic loading >> Heidenhain 3D probe TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and tool breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all coolant and pneumatic hoses replaced, new filters, fluids, and belts replaced. Scrapers etc. fully cleaned. >> Geometric inspection (acceptance report available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in very good condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an inspection report has been prepared. You are welcome to view and test the machine under power at our premises.

Stanje: rabljeno, CNC Milling Machine DECKEL Type FP 3 A Toolroom milling machine with handwheels, suitable for both CNC and manual operation Serial No. 2206 – Year of manufacture: 1982 CNC Contour Control GRUNDIG CNC 2101 Travel paths: X: 490 mm, Y: 300 mm, Z: 340 mm Table size: 705 x 425 mm Spindle taper: SK 40 Quill stroke: 100 mm Spindle speed: 25 – 2500 rpm, 21 steps Feed rate: 5 – 500 mm/min, stepless Rapid traverse speed: 1200 mm/min Spindle drive motor power: 2 / 4 kW, pole-changing Power supply: 380 Volt, 50 Hz - CNC contour control GRUNDIG CNC 2101 - Mechanical handwheels on all three axes - Universal swivel/tilt rotary table - Vertical milling head tiltable and manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Front and side protective enclosure with 3 folding doors Podpfxov R E Rdj Aafsgu - Free-standing control cabinet (L x W = 600 x 430 mm) Space requirement (L x W x H): 1900 x 1700 x 1950 mm Weight: 1700 kg (Machine 1540 kg + electrical cabinet 160 kg) Very good condition

Stanje: dober (rabljeno), Deckel FP1 Universal Milling Machine - Travel distances X/Y/Z: 245 x 150 x 340 mm - Supplied without vertical head / Machine was exclusively used for horizontal milling operations - Speed range: 95 – 1900 rpm Pgsdowpruxjpfx Aafou - Built-in rotary table - Automatic feeds on X & Y axes - Various collets included - Documentation available Dimensions: L x W x H: 1.1 x 0.9 x 1.6 meters / Weight: 650 kg Errors and omissions excepted.

Stanje: rabljeno, Leto izdelave: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm Table clamping surface 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t Pedpfxewwwr Es Aafjgu - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2102-2641, Deckel FP 1 Aktiv milling machine with Heidenhain TNC113 digital readout in very good condition, with original paintwork. Technical specifications: * Year of manufacture: 1985, Machine No. 2102-2641 * Swivel/tilt/rotary table * Spindle speed: 40 - 2000 rpm * Infinitely variable feed in 3 axes * Rapid traverse in 3 axes * Spindle brake * Travel X/Y/Z: 300/160/340 mm * Vertical milling head adjustable on spindle support by 100 mm * Vertical quill * Tool clamping system SK40/S20x2 * Weight: approx. 800 kg Accessories and equipment: * 3-axis digital display Heidenhain TNC113 * Coolant system * Operating manual, spare parts list Pjdef E Ilzopfx Aafogu The offered Deckel FP 1 Aktiv milling machine is in very good condition. All spindles move smoothly with minimal backlash. All guides have been inspected and are in very, very good condition. The machine runs smoothly at all speeds. All bellows, wipers, rollers, etc. are in excellent or new condition; oil change has been performed. Mechanically and electrically tested. You are warmly invited to inspect and test this machine and see its excellent condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 39.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 420 mm, pomik po osi Z: 380 mm, model krmilnika: Heidenhain Mill Plus IT, skupna višina: 5.600 mm, skupna dolžina: 9.000 mm, skupna masa: 6.000 kg, For sale is a 5-axis machining center by DMU, model 50 eVolution. Special features include the GMN high-frequency spindle HCS 30,000/15 and the 92-position tool changer. The machine is in good condition and fully operational. Technical Data: Year of manufacture: 2004 Operating hours: approx. 39,000 h Control: Heidenhain MillPlus IT Table size: approx. 500 mm ⌀ Travel: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0–180° C-axis: 360° Tool holder: HSK 50 Spindle speed: max. 30,000 rpm Frequency: 500 Hz Power: 15 kW Tool positions: 92 NO chip conveyor Space requirements according to drawing: 9,000 × 5,600 mm Transport dimensions: 2,800 × 3,700 × 2,800 mm Weight: 6,000 kg Transport and loading can be organized across Europe for an additional fee upon request. Prices are subject to VAT. Inspection possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machine Purchasing & Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Fzho0bc Pgjdpfotyit Eex Aafju Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or to get in touch, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Control: Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Psdpfx Aajwrt Rmsfjgu Spindle speed: 15,000 rpm 2-station pallet changer, 400 x 400 mm Tool magazine for 40 tools, SK 40 Paper filter Chip conveyor

Stanje: rabljeno, Universal tool milling machine direct from liquidation Milling machine DECKEL Type FP 4 Machine No. 1 Year of manufacture: 1978 Travel range: X: 700 mm, Y: 400 mm, Z: 450 mm Table clamping surface: 860 x 500 mm Spindle taper: SK 40 - M16 Spindle speed: 31.5 - 1600 rpm, 18 steps Quill travel: horizontal and vertical Main spindle drive: 4 kW Power supply: 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN - Universal swiveling, tilting and rotary table - Coolant system integrated in the machine base - Machine vice - Supplied without tools Space requirements (L x W x H): 2100 x 1750 x 1900 mm Pgodpfx Asv Srf Djafeu Weight: approx. 3 tons.

Stanje: dober (rabljeno), Orodjarska rezkalna naprava DECKEL FP 1 s 3-osnim aktivnim digitalnim prikazovalnikom TNC 113 iz izobraževalne ustanove - Hodi X/Y/Z 300x160x340 mm - Območje vrtljajev 40-2000 vrt/min - Brezstopenjski pomik v vseh treh oseh - Hitri pomik v vseh treh oseh - Navpična glava pomična za 100 mm Podpfow Rbxnex Aafjgu - Navpična - vodoravna rezkalna naprava - Orodni vpenjalni sistem ISO 40 - Pogonska moč 1,5 / 1,9 kW - Tog kotni stroj - Posoda za ostružke - Hladilna naprava - Delovna svetilka - Dokumentacija Dimenzije: D x Š x V 1,3x1,2x1,7 m / Teža 900 kg Možne so napake ali tipkarske napake

Stanje: dober (rabljeno), Leto izdelave: 2003, 18.000 U/min, Pgodpfx Aaowt Rvcefou 32 Plätze im Werkzeugwechsler, SK 40, per Hand gezeigte Anbauteile nicht im Lieferumfang enthalten.

Stanje: rabljeno, Universal tool milling machine DECKEL Type FP 1 Mach. No. 33064 Year of manufacture: approx. 1960, overhauled in 2012 Travel paths X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 1.1 and 1.4 kW Pgodpfjdzp T Eex Aafeu Power supply 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable and plug connection Required space L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg Good condition Machine was overhauled in 2012.

Stanje: rabljeno, Universal Tool Milling Machine DECKEL Type FP 1 Machine No.: 34338 Year of manufacture: approx. 1965 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 200 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95-1900 rpm, 12 steps Horizontal spindle speed: 60-1200 rpm, 12 steps Motor power: 1.0 and 1.5 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gearbox steps - Power feed on X and Z axes - Coolant device with mechanical pump in machine base - Quill stroke on vertical milling head: 60 mm - Swivelling, rotating and tilting angle table - Separate control cabinet Pjdpfx Aasic R I Refegu Required space L x W x H: 1000 x 900 x 1750 mm Weight: 690 kg Good condition