Deckel Fp 50 Cc nakup rabljenega (676)

Stanje: rabljeno, Leto izdelave: 1980, x-axis travel 300 mm y-axis travel 160 mm z-axis travel 340 mm Tool holder SK40 Spindle speed 40-2000 rpm Control unit: HEIDENHAIN Aktiv Ksdow A Apyjpfx Ah Ajfa Table size 600 x 210 mm Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. LWH 1200x1100x1600 mm - Powered feed on X and Z axes - Additional swivelling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Various tool holders, clamping devices, and milling cutters included - Operating manual

Stanje: dober (rabljeno), Leto izdelave: 2006, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, širina mize: 380 mm, dolžina mize: 500 mm, obremenitev mize: 200 kg, montažni premer: 30 mm, Merilna sonda TS640 Rezervoar 600 l s 40 bar notranjim hlajenjem (IKZ) Podaljšan transportni trak za odrezke za 30/60 orodij ATC Neposredne merilne letve tudi na B- in C-osi Zračno centrirano vreteno prek M-funkcije X-os: 500 mm Y-os: 450 mm Z-os: 400 mm A-os: 360° B-os: 0–108° Dolžina mize: 500 mm Širina mize: 380 mm Obremenitev mize: 200 kg Pomik X-os: 50.000 mm/min Pomik Y-os: 50.000 mm/min Pomik Z-os: 50.000 mm/min Nosilec orodja: 40ISO/BT/MK Moč vretena: 35 kW Št. vrtljajev: 18.000 obr/min Izmenjevalec orodij: 30 IKZ: 20 Kfedpfx Ahow Rl Igj Asa Število krmiljenih osi: 3+2 Transporter odrezkov: da Hladilna naprava: da Dolžina: 3.800 mm Širina: 3.200 mm Višina: 2.800 mm Teža: 6.500 kg

Leto izdelave: 1982, Stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Brand: DECKEL Kfedpepn Rgvjfx Ah Aoa Model: FP 3 Aktiv Year of manufacture: 1982 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2201-5539 with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread M16 - Central lubrication, manually operated - Coolant system - Operating manual Used, as seen The machine corresponds technically to the standard of its year of manufacture.

Stanje: dober (rabljeno), Leto izdelave: 1991, 1 rabljeni univerzalni orodni rezkalni stroj Proizvajalec: Deckel Tip: FP 1 z aktivnim digitalnim prikazovalnikom Heidenhain Leto izdelave: 1991 Tehnični podatki: X-hod: 300 mm Y-hod: 160 mm Z-hod: 340 mm Vpenjalo vretena: SK 40 Vertikalni hod pinole: 60 mm Velikost mize: 600x210 mm Hitrosti vretena: 40–2000 vrt/min Teža stroja cca: 1 t Kfodpfxow Sdmdo Ah Aoa Priključna moč: 7,5 kW Prostorske potrebe cca: 1,6x1,3x1,8 m Opremljen z: fiksno mizo nagibno mizo univerzalnim delilnikom različnimi držali za orodje horizontalnim naslonom

Stanje: rabljeno, x-travel 500 mm Ksdpfxsv Td Elo Ah Asfa y-travel 400 mm z-travel 400 mm

Stanje: nepreverjeno (rabljeno), Oglejte si tehnične podatke na fotografiji. Ksdpfx Ahjhvzxzj Ajfa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, NEW ARRIVAL 1 used, very well-maintained 5-axis CNC machining center D E C K E L D M U 50, year 2001, with only 14,056 spindle hours! X 500 - Y 380 - Z 380 mm – NC rotary table 500 x 380 mm with 180° swivel axis Display resolution 0.001 Spindle SK 40 / 15,000 RPM – 24-position tool changer Kedpfx Ajg Rhnnjh Aefa HEIDENHAIN CNC 426 – electronic handwheel – zero-point clamping system – tool breakage monitoring with laser length measurement – prepared for infrared probing – coolant system – machine mounts – many tool holders etc. Machine from SURGICAL production environment with regular maintenance! 2024: Complete spindle cooling system replaced. We would be happy to demonstrate the machine under power at our showroom. Delivery time: immediately – subject to prior sale and errors. Pricing: ex stock, plus 19% VAT, unpacked, uninsured. Payment: as is standard for used machines—before removal, immediately upon receipt of invoice. -- Best regards Mathias Becker Induba GmbH 78628 Rottweil

Stanje: rabljeno, X-axis travel 800 mm Y-axis travel 300 mm Z-axis travel 400 mm Kfsdjbq Dbaepfx Ah Asa Spindle speed 40 - 2000 rpm Spindle taper ISO 40 Feed rate 10 – 500 mm/min Spindle motor 2.2 kW

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 LV Aktiv Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2309-0146 Milling head type: 2271 Milling head no.: 700-0887 Warranty: 12 months, single-shift operation from delivery date, covering the mechanics overhauled by us. Electrical and electronic components are excluded, as they have only undergone a functional test. For machines located outside our North Bavarian sales territory, travel expenses are to be borne by the customer. Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbolt thread M 16 - Central lubrication, manual - Coolant system - Operating instructions Kjdpfxjtdnb Es Ah Asfa Used, sold as seen. The machine is technically in accordance with the standard from the year of manufacture.

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 2204 - 0469, x-travel: 580 mm y-travel: 400 mm z-travel: 450 (390*) mm Kfodocxxwajpfx Ah Aoa Table size: 460 x 800 mm Spindle speed range: 40 - 4000 rpm Feed range: 2 - 3600 mm/min Rapid traverse: 4.0 m/min Spindle taper: SK 40 Space requirement approx.: 3.0 x 2.10 x 2.10 m Spindle drive: 4.0 kW Control: Contour 2 CNC-controlled universal milling machine with Contour 2 control, swiveling vertical head +/- 90° with 80 mm quill stroke, horizontal spindle, automatic feeds and rapid traverse in 3 axes, hydraulic tool clamping, pendant control panel, electronic handwheel, automatic central lubrication, coolant system, emergency stop, chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, Universal Milling Machine DECKEL Type FP 1 Machine No. 52185 Year of manufacture: 1968 Travel range X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle taper SK 40 - S20 x 2 Kfedpfx Aodzqb Ssh Asa Spindle speed 40-2000 rpm, 16 steps Motor power 1.0 and 1.4 kW, pole-switchable Power supply 380 Volt, 50 Hz - Powered feed on X and Z axes - Two motor speeds and 8 gear stages - Quill travel on vertical milling head 60 mm - Fixed angle table - Coolant system integrated in machine base - Separate control cabinet - Support bracket with counter bearing for horizontal milling SK 40 Required floor space (L x W x H): 1200 x 1100 x 1600 mm Weight approx. 1000 kg In very good condition

Stanje: skoraj kot novo (rabljeno), X-hod: 300 mm Y-hod: 220 mm Z-hod: 400 mm Površina delovne mize: 620 x 390 mm Obrati vretena: 31 – 3150 obr/min Podajalno območje: 1 – 3600 mm/min Kfodpfeh Ty Hkox Ah Aoa Hitri pomik: 4000 mm/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Control System: Heidenhain TNC 310 Accessories: Available Working Area Ksdpfx Ajp H S Uxsh Ajfa X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Main Drive Spindle speed, infinitely programmable: 20 – 4,500 rpm Tool holder: SK 40 Work Table B/C-axis drive: Manual Clamping surface: ø 700 x 500 mm T-slot spacing/size: 63/14H7 mm Rotational range: 360° Swivel range: +95 / -10° Dimensions Length: 1800 mm (750 mm control unit) Depth: 1800 mm Machine weight: 2,600 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Universal milling machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1984 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2101-1067 Milling head type: 2171 Milling head no.: 1086 with warranty Geometric acceptance with inspection protocol Accessories: Kfsdpfxjchfyfs Ah Asa - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X and Z axes - Fixed table 600 x 200 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual - used, as seen -

Stanje: rabljeno, Leto izdelave: 1986, številka stroja/vozila: 2204-0929, x-travel: 560 mm y-travel: 500 mm Kfedpfecxxrisx Ah Asa z-travel: 450 / 390 mm Quill stroke: 80 mm Feed rate: 2 - 3600 mm/min Table clamping area: 800 x 460 mm Spindle speeds: 40 - 4000 rpm Spindle taper ISO: ST40 Swivel head left and right: +/- 90° Control: Contour 2 Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Space required approx.: 2.0 x 2.5 x 2.2 m CNC-controlled universal milling machine with Contour 2 control system, vertical head swivels +/- 90° with 80 mm quill stroke, horizontal spindle, feeds and rapid traverses on 3 axes, hydraulic tool clamping, pendant control panel, machine lighting, automatic central lubrication, coolant device, emergency stop, chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, Universal tool milling machine DECKEL type FP 1 Machine No. 28317 Year of manufacture: approx. 1960 Travels X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Kfjdpeiy Ekvofx Ah Asa Horizontal spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 0.8 and 1.1 kW, pole-changing Power supply 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gearbox steps - Feed on X and Z axes - Coolant system with mechanical pump integrated in the machine base - Quill travel on the vertical milling head 60 mm - Vertical milling head swivels +/- 90° - Metal base made of angle iron with machine feet Space required (L x W x H): 1100 x 900 x 1650 mm Weight: 650 kg In good condition

Stanje: rabljeno, 3-axis digital display Heidenhain ND780 Coolant system Mechanical central lubrication Rigid angle table X travel: 400 mm Y travel: 220 mm Z travel: 400 mm Speed range: 25 - 2500 rpm Infinitely variable feed on 3 axes Rapid traverse on 3 axes Spindle brake Vertical milling head can be moved 150 mm on spindle carrier Vertical quill and horizontal quill – SK 40 extendable Kedpfx Ahobu U Nno Asfa Drawbar system S20x2 Weight approx. 1400 kg

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes Kfjdpfx Aor En Dysh Aoa - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 31268, X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Quill stroke: 115 mm Table surface: 900 x 700 mm Spindle speeds: 30–6000 rpm Spindle taper: SK 50 Control: Sinumerik 3 M Feed rate: 0–6000 mm/min Spindle drive motor: 7.5 kW Total connected load: 32 kW Machine weight approx.: 6.6 t Kfjdpfjcxxwgox Ah Aja Space requirements approx.: 3.8 x 1.8 x 2.9 m Universal milling machine with Sinumerik 3 M control, swiveling table – adjustable in 3 axes +/-30°, tiltable +/-30°, rotatable +/-45°. Milling head swiveling in 2 axes. Separate electrical cabinet, coolant system, automatic central lubrication, work light, emergency stop safety function.

Stanje: rabljeno, Universal tool milling machine direct from liquidation Milling machine DECKEL Type FP 4 Machine No. 1 Year of manufacture: 1978 Travel range: X: 700 mm, Y: 400 mm, Z: 450 mm Table clamping surface: 860 x 500 mm Spindle taper: SK 40 - M16 Spindle speed: 31.5 - 1600 rpm, 18 steps Quill travel: horizontal and vertical Main spindle drive: 4 kW Power supply: 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN - Universal swiveling, tilting and rotary table - Coolant system integrated in the machine base - Machine vice - Supplied without tools Space requirements (L x W x H): 2100 x 1750 x 1900 mm Weight: approx. 3 tons. Kfedpfx Aov Srf Doh Asa

Stanje: rabljeno, številka stroja/vozila: 2819-0517, x-axis travel: 300 mm y-axis travel: 300 mm Kfodecxxp Tspfx Ah Asa z-axis travel: 400 mm (340 mm with apron) Clamping surface: 390 x 620 mm / chip tray Spindle speed: 40–2500 rpm Feed range: 0.2–3600 mm/min Rapid traverse: 4.0 m/min Control: Contour 3 – 3D Path Control System Spindle taper: SK40 Quill stroke: 60 mm Swiveling head +/-: 90° Spindle drive motor: 2.0 kW Total power requirement: 1.6 / 2.0 kW Machine weight approx.: 1.3 t Space requirement approx.: 1.8 x 1.8 x 1.8 m Universal milling machines from Deckel have proven themselves for decades in mold, tool, and machine construction. CNC-controlled tool milling machine with Contour 3 control, vertical head swivels +/- 90° with 60 mm quill stroke, horizontal spindle, feeds and rapid traverse on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop button, chip guard enclosure with chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, Universal tool milling machine DECKEL Type FP 1 Mach. No. 33064 Year of manufacture: approx. 1960, overhauled in 2012 Travel paths X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 1.1 and 1.4 kW Power supply 380 Volt, 50 Hz Kedpfx Ahsdzp T Ej Asfa - Feed on X and Y axes - Quill adjustment on vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable and plug connection Required space L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg Good condition Machine was overhauled in 2012.

Stanje: rabljeno, številka stroja/vozila: 2801-0234, X-travel: 300 mm y-travel: 220 mm z-travel: 400 mm Clamping surface: 620 x 390 mm Spindle speed: 31 - 3150 rpm Feed range: 1 - 3600 mm/min Rapid traverse: 4000 mm/min Spindle taper: SK 40 Head swivels +/- 90° Quill stroke: 60 mm Total connected load: 1.09 / 2.0 / 4.0 kW Ksdpfxscxxm Eo Ah Aofa Machine weight approx.: 1.3 t Space requirement approx.: 1.3 x 1.1 x 1.6 m CNC-controlled universal milling machine with Dialog 4 control, vertical head swivels +/- 90° with quill stroke 60mm, horizontal spindle, feeds and rapid traverse in 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop, chip guard enclosure with chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 0736, x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm Work table: 1000 x 440 mm Spindle speeds: 40 - 2000 RPM Number of speed steps: 18 Feed range: 10-500 mm/min Number of feed steps: 18 Rapid traverse: 1.50 m/min Kfedpfjcxxyhex Ah Asa Spindle taper: SK40 Total power requirement: 2.2 kW Machine weight approx.: 2 t Space requirement approx.: 1.57 x 1.68 x 1.85 m Universal tool milling machine in traveling column design, suitable for particularly heavy and large workpieces. Equipped with a swiveling vertical head and quill (stroke 85 mm), horizontal spindle with quill (stroke 120 mm), inclined bed with fixed, precise angle table, automatic feeds on 3 axes, chip tray, coolant pump and system, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 2806-0743, x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm Table clamping surface (W x D): 1000 x 550 mm Spindle speeds - stepless: 0 - 5000 rpm Feed rate, directly programmable: 2 - 6000 mm/min Rapid traverse: 6.0 m/min Quill stroke: 80 mm Tool holder: SK40 Total power requirement: 12 kW Machine weight approx.: 3.9 t Space requirement approx. (L x W x H): 2200 x 2800 x 2400 mm Ksdjcxxngspfx Ah Aofa