Univerzalni konvencionalni rezkalni stroji za orodja, X-hod 700–999 mm nakup rabljenega (17)

Stanje: rabljeno, Leto izdelave: 1965, x-travel 700 mm y-travel 350 mm z-travel 450 mm Clamping surface of table: 940 x 510 mm Spindle taper: SK 40 Spindle speeds: 32 - 1600 rpm Feeds – longitudinal & cross: 8 - 400 mm/min Feeds – vertical: 4 - 200 mm/min Cjdpfevzhh Tox Afnepw Total power requirement: 4.5 kW Machine dimensions (L x W x H): 1.85 x 1.62 x 1.83 m Accessories: swivel-type vertical head with extendable quill, universal table, counter bearing, coolant device

Stanje: rabljeno, Universal tool milling machine MAHO type MH 800 P with digital display and HEIDENHAIN TNC 121 path control Serial no. 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently rarely used in the workshop of an electronics company. Travels: X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Cpodpfx Afsv Amryonsw Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z axis: 10-500 mm/min, stepless Feed rate Y axis: 5-250 mm/min, stepless Rapid traverse X, Z axis: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Quill travel vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill travel horizontal: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02 - 0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in machine base - Universal rotary table, 360° rotatable, 30° swivel and tiltable, 225 mm cross travel - Rotary table with direct division 72 x 5° and indirect division via indexing disc 1:120 = 1 rev. = 3° - Swiveling operator panel - Central lubrication - Operating manual - Machine mounted on a steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Required floor space L x W x H 2650 x 2000 x 2450 mm Weight 3700 kg + 550 kg steel plate Total weight 4250 kg (measured) In very good condition

Stanje: rabljeno, Leto izdelave: 1998, Technical details: X-axis travel: 820 mm Y-axis travel: 280 mm Z-axis travel: 410 mm Spindle mounting (ISO): SK 40 Distance table/horizontal spindle: min. 30 / max. 440 mm Cross beam adjustment - horizontal: 650 mm Speed range: 40...2000 / 18 steps rpm Swivel range +/-: at 90°: 360° and at 45°: 360° degrees Clamping surface: 1120 x 250 mm Table swiveling approx.: 45° right / left Feed rate: X/Y: 12.5 - 830 + Z: 5.2 - 260 mm/min Rapid traverse: X/Y: 2500 and Z: 1040 mm/min Total power requirement: 10 kW Machine weight approx.: 2000 kg Machine dimensions (LxWxH) approx.: 2.2 x 1.8 x 1.7 m Cjdpsva Ei Sofx Afnopw Equipment: 2x counter bearings Ø 55 mm Coolant device: pump and supply Operation via 3-axis measuring system ACU-Ride and control panel Machine feet

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 21207004, Ponudba 25434 Tehnični podatki: - Delovno območje osi - X (vzdolžna) / Y (prečna) / Z (navpična) 750 / 380 / 380 mm - Dimenzije mize 1300 x 300 mm - Vpenjanje orodja ISO 40 - Avtomatski pomik pinole - Hod pinole - Naprava za rezanje navojev 140 mm - Razdalja navpično vreteno – miza 20 - 540 mm - Hitrosti delovnega vretena 80 - 3800 min⁻¹ - Pomik X – Y in Z os Cpodpox Dl Hhjfx Afnjw - Hitri pomik 1400 mm/min - Nagibna navpična rezkalna glava vsaka po 45° levo in desno - Zavrtljiv zgornji nosilec 360° - Naprava za hlajenje - Pogon 400 V / 5,0 kW - Potrebna površina pribl. Š 2000 x V 2500 x G 2100 mm - Teža pribl. 2200 kg - Posebna delovna miza / orodni omarica z razno opremo

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, electric - Coolant device Cpodpfoh Rv U Eox Afnow - Operating manual - Drill bit grinding attachment with diamond wheel - used, as seen -

Stanje: rabljeno, številka stroja/vozila: 1621, x-axis travel: 800 mm y-axis travel: 300 mm z-axis travel: 400 mm Table size: 1000 x 440 mm Tool holder spindle taper: SK40 Spindle speeds (belt pulley): 40 - 2000 rpm Number of main spindle speed steps: 18 Maximum spindle speed: (6000 possible by changing the belt) rpm Feed rate range: 10 - 500 mm/min Number of feed speed steps: 18 Total power requirement: 3 kW Machine weight approx.: 2.1 t Space requirement approx.: 1600x1550x1930 mm Universal tool milling machine in travelling column bed design for machining heavy workpieces, featuring a 3-axis rotating and swivelling work table, feeds and rapid traverse on all 3 axes, both vertical and horizontal quills with high-speed head, maximum speeds of 1900/2350/3000/3750/4750/6000 rpm adjustable via belt preselection, coolant pump, universal clamping table equipped with 6 T-slots, each 16 mm x 7. Separate control cabinet without main machine switch. Cpodpfx Afjh Ra Nqonew

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Cjdpfxet U Rm Ie Afnjpw Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Stanje: rabljeno, Leto izdelave: 2003, x-travel: 760 mm y-travel: 290 mm z-travel: 370 mm Speed: 60 - 4200 rpm Table: 750 x 230 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.13 mm/rev Feed range: 19 - 890 (x) mm/min Spindle taper: SK 30 Column overhang: 171 - 476 mm Total power requirement: 2.4 kVA Machine weight approx.: 0.95 t Space requirement approx.: 2.05 x 1.63 x 2.07 m The MF1 universal milling machine series impresses with its design and has become indispensable in many repair shops as well as training and production departments. The X-axis is equipped with a continuously variable feed unit, and the swiveling vertical milling head features a wide, stepless speed range for machining steel and non-ferrous metals. Standard equipment includes automatic quill feed, pneumatic tool clamping, and a digital position display. ·Swivel and tilting milling head with quill feed Cpsdpfxst U Rm Uj Afnew ·Pneumatic tool clamping device ·Continuously variable spindle speed ·Rapid feed in X-axis ·Comprehensive standard accessories

Stanje: rabljeno, številka stroja/vozila: 0736, x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm Work table: 1000 x 440 mm Spindle speeds: 40 - 2000 RPM Number of speed steps: 18 Feed range: 10-500 mm/min Number of feed steps: 18 Rapid traverse: 1.50 m/min Spindle taper: SK40 Total power requirement: 2.2 kW Cjdpfxocxxyhe Afnjpw Machine weight approx.: 2 t Space requirement approx.: 1.57 x 1.68 x 1.85 m Universal tool milling machine in traveling column design, suitable for particularly heavy and large workpieces. Equipped with a swiveling vertical head and quill (stroke 85 mm), horizontal spindle with quill (stroke 120 mm), inclined bed with fixed, precise angle table, automatic feeds on 3 axes, chip tray, coolant pump and system, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 2806-0743, x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm Table clamping surface (W x D): 1000 x 550 mm Spindle speeds - stepless: 0 - 5000 rpm Feed rate, directly programmable: 2 - 6000 mm/min Rapid traverse: 6.0 m/min Cpsdpjcxxngefx Afnsw Quill stroke: 80 mm Tool holder: SK40 Total power requirement: 12 kW Machine weight approx.: 3.9 t Space requirement approx. (L x W x H): 2200 x 2800 x 2400 mm

Stanje: rabljeno, Univerzalna rezkalna stroj ERNAULT SOMUA HES ZHV1 Pomik X: 700 mm Pomik Y: 250 mm Pomik Z: 350 mm Obrati: od 40 do 2000 obr/min Cpjdpfxexxlp Ss Afnjw Velikost mize: dolžina 1200 mm x širina 300 mm Univerzalna vrtljivo navpična/vodoravna glava Digitalni odčitek 3 osi EAE Hitri pomiki v 3 oseh Napetost: 380 V Širina: 2000 mm Globina: 1800 mm Skupna višina: 1600 mm Teža: cca 1,5 t

Stanje: dober (rabljeno), Leto izdelave: 1997, x-pomik 600 mm y-pomik 450 mm z-pomik 400 mm Krmiljenje Heidenhain 430 ITNC Vpenjalo orodja SK 40 Obratovalna napetost 400 V Krmilna napetost 24 V Teža stroja ca. 6 t - Obratovalne ure: 48.690 Cpodpfx Aswbi A Djfnsw - Maks. obremenitev mize: 1.000 kg - Teža stroja: 6.000 kg - Vključno z nosilci orodij – SK40 - Vključno z vsemi opisi - Vključno s programirnim priročnikom – Heidenhain - Vključno z enim strojnim primežem - Vključno s pritrditvenimi kremplji

Leto izdelave: 1986, stanje: zelo dobro (rabljeno), številka stroja/vozila: 12024, Table clamping surface: 290 x 1250 mm Table travel X: 800 mm Table travel Y: 360 mm Table travel Z: 450 mm Cpodpjf Tc R Ujfx Afnow Milling head swivels: 90/45 ° Spindle taper: ISA 40 Spindle speeds: 56 - 4,500 rpm Quill stroke: 125 mm Quill feeds: 0.035; 0.14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Space requirements: 2,000 x 1,900 x 2,300 mm Weight: 1,700 kg

Stanje: rabljeno, x-travel 800 mm Cpjdpfx Asqpl Uujfnsw y-travel 400 mm z-travel 300 mm Heidenhain digital readout Clamping table size 1000 x 520 mm Spindle speed range 40 – 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Space requirements approx. 1700 x 1600 x 1800 mm Deckel FP 2 B – slant-bed, travelling column design Universal swivel-tilt table Including various SK40 tool holders, draw thread S20x2 Collet chuck The machine was overhauled for approx. €24,000.00

Stanje: rabljeno, x-travel 780 mm y-travel 220 mm z-travel 410 mm Table length 1100 mm Cpedpsupxxnsfx Afnsw Table width 270 mm Spindle speeds 40 - 960 rpm Spindle taper SK 40 Total power requirement kW Machine weight approx. 1.7 t Space requirements approx. 1.8 x 1.6 x 1.8 m Horizontal milling machine - incl. indexing table

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Takang milling machine. Ready for immediate use with various types of tooling. Instruction manual included. Installation and trade-in possible. If interested, please call! Kenta Industrial Tools and Service Ambachtsstraat 3 7951 ZA Staphorst Cpedpowy Rpvjfx Afnew

Stanje: rabljeno, X-AXIS TRAVEL: 800 MM X-AXIS WORK FEED: 10–600 MM/MIN X-AXIS RAPID TRAVERSE: 1500 MM/MIN Y-AXIS TRAVEL: 450 MM Y-AXIS WORK FEED: 10–600 MM/MIN Y-AXIS RAPID TRAVERSE: 1500 MM/MIN Z-AXIS TRAVEL: 250 MM Z-AXIS WORK FEED: 10–600 MM/MIN Z-AXIS RAPID TRAVERSE: 1500 MM/MIN TABLE OVERALL LENGTH: 800 MM OVERALL WIDTH: 300 MM T-SLOT SIZE: 12 MM NUMBER OF T-SLOTS: 6 Cpodewg Trgepfx Afnjw T-SLOT SPACING: 50 MM MAXIMUM DISTANCE BETWEEN VERTICAL SPINDLE AND TABLE: 365 MM