Presona Ab Lp 50 Eh1 nakup rabljenega (44.683)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, leto zadnje generalne obnove: 2024, Technical Specifications of the Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under working conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: 30 kg/m³: 6 to 7 t/hour 50 kg/m³: 7 to 9 t/hour 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspaper): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel guideways welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, new oil filled - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Menu language set to English in the program - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Limit switch for the flap replaced - Electrics of the wirbulator renewed, connected, and tested Press ram: - All four guide rollers of the press ram removed and replaced - Main hydraulic cylinder dismantled, disassembled, and partially overhauled; cylinder barrel honed, complete seal set replaced, leak test carried out - All plastic wear pads on the press ram replaced Pre-press flap: - Both bearings on pre-press shaft replaced - Both hydraulic cylinders dismantled, disassembled, and partially overhauled; both cylinder barrels honed, complete seal sets replaced, leak test carried out - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced Rsdpfx Ageu Thhrstot - Twister fingers replaced - Two twister shafts replaced - All 8 wear plates on the twist mechanism under the twister fingers replaced Scope of delivery: Only the baler is being sold. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Inspection by appointment. We assume no liability for the technical details or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, obratovalne ure: 28.748 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 570 kg, skupna masa: 20.000 kg, kapaciteta rezervoarja za olje: 600 l, moč: 37 kW (50,31 KM), volumenski pretok: 350 m³/h, Technical Data for Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of manufacture: 2015 Total operating hours: 30,143 hours (as of July 2025) Effective pump runtime: 6,527 hours (as of July 2025) Number of bales pressed: 115,193 (as of July 2025) Pre-press force: 25 t Main press force: 60 t Specific pressing force: 73 N/cm² Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Theoretical throughput: 800 m³/h Throughput under operating conditions: 350 m³/h Bale dimensions: 1,100 x 750 mm Drive power: 37 kW Binding: 5-fold vertical, fully automatic Throughput at bulk density of 50 kg/m³: 11 to 14 t/h Bale weights: 420 to 570 kg (material dependent) Hydraulic oil tank volume: 600 L Baler dimensions (assembled with hopper): 10,100 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine weight (baler): approx. 20 t Condition of the baler: The baler was partially overhauled in our workshop and subsequently tested in both manual and automatic modes. The following maintenance work was performed: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully emptied and cleaned - Oil and air filters replaced; new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers of the press ram removed and replaced - Grease cartridges of the automatic roller lubrication system replaced - Slide rails at the press floor in the pressing chamber cut out - Undercarriage reinforced with welded plates Rsdpevn Tg Iefx Agtst - New HARDOX slide rails welded in - Wire station with guide pulleys for lower wire cleaned and made operational - Slide rails on press channel floor cut out - New HARDOX slide rails welded in - Both side walls of the press channel removed and derusted - Worn side wall plates cut out - Complete side walls fitted with new wear plates and welded - Main hydraulic cylinder disassembled and inspected - Piston rod replaced, cylinder barrel honed - Complete seal kit renewed; pressure test performed - Vertical needle system for binding disassembled, cleaned, wire guide pulleys serviced - Chain cleaned and lubricated; chain tension reset - Drillomat cleaned; wire cutter, drill shafts and twisting fingers checked, retightened to specified torque and serviced - Machine inspected, general maintenance performed, and press tested in both manual and automatic modes Notes: The baler is sold without conveyor belt and without wire stations. Inspection by arrangement possible. We assume no liability for technical data or any errors.

Stanje: dober (rabljeno), Leto izdelave: 2008, obratovalne ure: 24.629 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.650 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 900 kg, skupna masa: 24.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 1.350 m³/h, transportna širina: 2.400 mm, transportna dolžina: 10.000 mm, Good day, Rodsymmmpepfx Agtet We are pleased to offer you, subject to prior sale, a used baler manufactured by Presona AB, model LP 100 CH2 S. The following technical specifications have been taken from the manufacturer's manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 (as of February 2026) Effective pump operating hours: 10,090 Main press force: 100 t Specific press force: 81 N/cm² Pre-press flap force: 50 t Feed opening dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic tank capacity: 2,000 L Transport weight (excluding the press after disassembly): approx. 25 t Note: The machine has been used in a recycling facility for compacting paper, cardboard, and films. The baler is in good condition and will be replaced by a new, larger press in July 2026. Until then, the machine can be inspected in operation with material processing. We would be pleased if this baler is of interest to you. Your service team Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH Rjdpjvgrh Usfx Agtot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Rsdpfev T I Evsx Agtst Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Rsdpevwlqqofx Agtet Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.900 h, številka stroja/vozila: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Throughput based on material bulk density: * 30 kg/m³ = 7-9 t/h * 50 kg/m³ = 8-9 t/h * 100 kg/m³ = 11-14 t/h - Hopper length: 1500 mm - Hopper width: 1100 mm - Feed chamber volume: 2.7 m³ - Bale width: 1100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400-550 kg - Number of vertical tying wires: 5 pcs. - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Hydraulic tank capacity: 600 l - Motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 Rsdpfx Ajyrhi Nogtjt - Specifications: * Conveyor width: approx. 1300 mm * Length of horizontal section: 5,500 mm * Length of inclined section: approx. 10,800 mm * Conveyor weight: approx. 6 t Scope of delivery: - Baler, control cabinet, operator panel, conveyor belt for sale. The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Viewing available by appointment. We assume no liability for technical information or possible errors. Video material can be provided upon request.

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Bale Press Presona LP 85 VH2 with cross-tying, year of manufacture 2018 Technical data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical capacity: 1200 m³/h Throughput (at 30-100 kg/m³): 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank capacity: 2000 L Transport dimensions of press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg Redpfoyz Snpjx Agtst The press was dismantled from ongoing operations. Technical documentation is available. Please note: All technical data is based on manufacturer information. We assume no liability for the information provided or for possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. Sale against advance payment ex works, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 1982, številka stroja/vozila: 340, Ponudba 25032 Tehnični podatki: - Vrtalna zmogljivost v jeklu ST 60: 50 mm - Vrtalna kapaciteta v jeklu ST 60: 65 mm - Naprava za rezanje navojev do M 60 - Vpenjalo vretena: MK 5 - Hodi vretena: 240 mm - Izmet: 400 mm - Miza z 2 T-utori: 720 x 560 mm - Maks. razdalja miza – vreteno cca: 850 mm - 4 podajalne hitrosti: 0,1 - 0,2 - 0,3 – 0,4 mm/obrat - Menjalnik z brezstopenjskim avtomatskim prenosom Redoyk Dp Nspfx Agtot - Vrtljaji vretena brezstopenjsko nastavljivi: 40 - 1600 min⁻¹ - Pogon: 400 V / 5,5 kW - Potrebni prostor (prib.): Š 850 x V 2480 x G 1350 mm - Teža (pribl.): 1450 kg

Stanje: novo, Drilling capacity in steel (diameter): 60.0 mm Tapping capacity: M 42 Throat: 350 mm Drilling stroke: 200 mm Spindle speed: 60 - 1530 rpm Table size: 720 x 510 mm Drill spindle Morse taper: MK 4 short spindle Column diameter: 200 mm Feed rates: 0.15-0.2-0.3-0.36 mm/rev Spindle/table distance: 159 / 884 mm Motor power: 3.6 / 4.3 kW Weight: 605 kg Machine height: 1950 mm Rsdpjxabgiefx Agtst Features: - Automatic feed with electromagnetic feed clutch - 4 feed steps: 0.15 / 0.2 / 0.3 / 0.36 mm/rev - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Spindle guard with electric safety interlock - Digital speed display - Machined base plate Special equipment included: - Coolant system mounted in base, item no. 24 - Tapping device, item no. 20.0 - LED machine lamp, item no. 12

Leto izdelave: 2025, stanje: novo, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor. Suitable for both viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, edible oil, vinegar, juice, milk, etc. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen control panel, available in various languages such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport (double transport possible), air separation/extraction device (removes air from the pouch before sealing—does not generate vacuum), support device for heavy finished pouches, Euro-slot punching device, suitable for OPP and PE film (PE unit available at extra charge if required). Specifications of the VFFS packaging machine: Dosing range: up to 3000 ml; film width: max. 520 mm; pouch size min–max: L(80–400) x W(80–250) mm; max. machine speed without load: 50 cycles/min; stainless steel 304; 220V, 4kW; 6 bar, 0.3 m³/min; machine dimensions (LxWxH): approx. 1150 x 1790 x 1650 mm; weight: 600 kg. Tank and pump specifications: Tank capacity approx. 50 l (customization possible); height approx. 70 mm; pump available in various versions, e.g.: 10–150 ml, 150–500 ml, 500 ml–1L, 1L–2L, 2L–5L, etc. The pumping system is adapted to your individual products based on samples provided. Specifications and product feed may vary accordingly (surcharge possible). The discharge conveyor features a stainless-steel frame. Specifications: conveyor speed 30 m/min; 220V, 0.55 kW; dimensions (LxWxH): approx. 1850 x 550 x 1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1080 x W3640 x H1720 mm, depending on final configuration. The system must be customized to customer- and product-specific requirements. Therefore, the specified data may deviate depending on the modules and machines supplied. Key components include: Colored touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. Rsdpjv Nmlaofx Agtjt The machine/system is also available in other designs for various packaging sizes and speeds. Please note that our new prices are often below typical used machine prices. Simply inquire and let us know your packaging requirements—we’re happy to advise. We typically have 30–50 different new machines in stock and available for immediate delivery. For custom-built machines, we offer very short lead times from about 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor belt. Suitable for both viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, edible oil, vinegar, juice, milk, etc. The vertical form fill seal machine (VFFS) is equipped with the following components: PLC (touchscreen operating monitor, available in various languages, e.g. English, German, etc.), date printer, automatic program setup, registration sensor, quick-change forming set, pneumatic sealing unit, servomotor-driven film transport (double transport possible), air separation/removal device (removes air from the bag before sealing—does not generate a vacuum), holder for heavy finished bags, Euro slot punching unit, suitable for OPP and PE film (PE unit possibly at extra cost). — VFFS machine specifications: Filling volume: 150–1200ml; Max. film width: 420mm; Bag size min–max: L(60–300)xW(60–200)mm; Max. machine cycle rate (idle): 50 cycles/min; Stainless steel 304; 220V, 2.2kW; 6 bar, 0.3m³/min; Machine dimensions (LxWxH): approx. 1080x1300x1400mm; Weight: 500kg. Rjdpfx Agsv Nmk Nstst — Tank and pump specifications: Tank capacity approx. 50L (customization available); Height: approx. 70mm; Pump available in various versions, e.g. 10–150ml, 150–500ml, 500ml–1L, 1L–2L, 2L–5L, etc. The pump system will be adapted to the customer’s product based on sample submission. Specifications and product feeding may vary accordingly (surcharges may apply). The discharge conveyor has a stainless steel frame. — Conveyor specifications: Conveyor speed: 30m/min; 220V, 0.55kW; Dimensions (LxWxH): approx. 1850x550x1230mm; Weight: 80kg. — Complete system dimensions: approx. L1780xW1850xH1470mm, depending on final configuration. The system must generally be tailored to customer/product requirements, so specifications may vary between modules and machines. Key components: Siemens color touchscreen display, Siemens PLC controller, Siemens servomotor, Airtac cylinders, Airtac solenoid valve, Omron relays, Siemens servomotor for film transport. The machine/system is also available in alternative versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used prices. Feel free to contact us and share your packaging requirements. — We typically have 30–50 different new machines immediately available from stock. For customized machines, we offer very short delivery times from approx. 3 weeks. — All machines are sold with a full warranty.

Stanje: novo, Leto izdelave: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC turning center with sub-spindle, driven tools and true Y-axis, 35° slant bed Max. swing diameter: 650 mm Max. turning diameter: 320 mm Max. turning length: 550 mm Linear roller guides on all axes Rapid traverse X/Z/Y: 20/20/12 m/min Y-axis travel: 140 mm; +/- 70 mm Turret: 12 stations, BMT55 all 12 driven positions Max. speed: 4000 rpm, 3 kW Main spindle Chuck diameter: 254 mm Spindle nose: A2-8 Max. bar capacity: 75 mm Spindle bore diameter: 86 mm Drive power, direct drive: 15/16 kW Max. speed: 3500 rpm Sub-spindle Chuck diameter: 152 mm Spindle head standard: A2-5 Max. bar capacity: 46 mm Drive power: 11 kW Max. speed: 3,000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard equipment: Parts catcher preparation Hinged belt chip conveyor Oil skimmer Coolant system Three-color warning light Work area lighting Centralized lubrication Programmable tailstock Set of soft jaws Redpowwvldofx Agtjt Tools and toolbox CE conformity Operator manual The machine will be exhibited at EMO, Hall 12/D10, and is immediately available afterwards. A variety of automation systems such as bar feeders and loading robots are available.

Stanje: rabljeno, Leto izdelave: 2026, barva: siv, skupna masa: 15.000 kg, širina tovornega prostora: 2.500 mm, dolžina tovornega prostora: 5.500 mm, višina nakladalnega prostora: 1 mm, prevoženi kilometri: 1.001 km, prva registracija: 01/2026, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, pritrdilne zanke Nadgradnja: odvalna platforma s pritrdilnimi zankami, ARHIVSKE SLIKE! Prijemni elementi za kavljaste sisteme po DIN 30722-1, Rsdpfx Agjytxzrjtot Talna kad iz 5mm jekla, prednja stena iz 3mm, talna površina iz rebraste pločevine, INP 180, poševni dovoz, opozorilne oznake, 4x pritrdilne zanke na vsaki strani in 2x na prednji steni RAL 7016! DODATNA OPREMA BREZ JAMSTVA, pridržujemo si pravico do sprememb, vmesne prodaje in napak!

Stanje: novo, Leto izdelave: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC Turning/Milling Center with tailstock, driven tools, and real Y-axis travel of ± 70 mm, 35° slant bed, and linear roller guides. Available for viewing in showroom. Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 driven Max. rotational speed: 4,000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional 254 mm) Spindle nose: A2-6 (optional A2-8) Max. bar capacity: 52 mm (options: 65, 75, and 91 mm) Spindle bore diameter: 66 mm Direct drive motor power: 22/30 kW Max. speed: 4,000 rpm Tailstock diameter: 110 mm / MK 3 Tailstock travel: 850 mm Rsdpfeqa Dtfsx Agtet Dimensions (WxDxH): 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard equipment: Coolant system 3-color warning light Work area lighting Centralized lubrication Programmable tailstock Set of soft jaws Tools and tool box CE compliance Operating manual Including special accessories: Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar feeder interface Video shows DT500.

Stanje: rabljeno, Leto izdelave: 2025, barva: siv, skupna masa: 15.000 kg, širina tovornega prostora: 2.500 mm, dolžina tovornega prostora: 5.500 mm, višina nakladalnega prostora: 1 mm, prevoženi kilometri: 1.001 km, prva registracija: 01/2025, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: v dovozu / v tranzitu, privezne zanke Rjdpfx Asx Iwftsgtst Nadgradnja: samorazkladalna platforma s privezimi zankami, ARHIVSKE FOTOGRAFIJE! Nosilci za kaveljske sisteme po DIN 30722-1, Talna kad iz 5 mm jekla, sprednja stena iz 3 mm, talna rebrasta pločevina, INP 180, poševni vstop, opozorilne oznake, 4x privezne zanke na vsaki strani ter 2x na sprednji steni RAL 7016! Predvidena dobava konec januarja / začetek februarja 2026. PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane!

Stanje: rabljeno, Leto izdelave: 2025, barva: siv, skupna masa: 15.000 kg, širina tovornega prostora: 2.500 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 1 mm, prevoženi kilometri: 1.001 km, prva registracija: 01/2025, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: v prihodovanju / v tranzitu, pritrditvene zanke Nadgradnja: snemna platforma s pritrditvenimi zankami, ARHIVSKE SLIKE! Priključki za kaveljske sisteme po DIN 30722-1, talna kad iz 5 mm jekla, prednja stena iz 3 mm, rebrasta talna pločevina, INP 180, poševna dovozna rampa, opozorilne označbe, 4x pritrditvene zanke na stran ter 2x zanki spredaj RAL 7016! Dobavljivo predvidoma konec januarja / začetek februarja 2026. PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Rodpfox Iwf Hex Agtst

Stanje: novo, Leto izdelave: 2026, barva: siv, skupna masa: 15.000 kg, največja dovoljena obremenitev: 13.240 kg, lastna masa: 1.760 kg, širina tovornega prostora: 2.500 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 1 mm, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, pritrdilne zanke Nadgradnja: previjalna platforma s pritrdilnimi zankami, ARHIVSKE SLIKE! Priključki za kaveljske sisteme po DIN 30722-1, talna kad iz 5 mm jekla, sprednja stena 3 mm, tla iz rebraste pločevine, INP 180, poševna klančina, opozorilne oznake, 4x pritrdilne zanke na strani in 2x na sprednji steni RAL 7016! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Redpfjyrhxkex Agtot

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, številka stroja/vozila: 20020363, Altmann Portal Crane / Gantry Crane + Radio Remote Control For cleanroom / laboratory or food industry applications Model: ELP05-3.200-E_RR Load capacity/lifting capacity: 500 kg Rjdewlb N Repfx Agtjt Technical specifications of the system: Crane runway/steel structure made of HEA220 beam / square tube, mounted on 4 heavy-duty swivel castors. With a 500 kg Altmann hoist including HBC radio remote control Overall height approx. 3.35 m Underside of runway rail approx. 3.13 m Depth approx. 150 cm Hook height approx. 2.9 m Inspection certificate available, remaining SWP (service life) 99%!! Crane is dismantled and immediately available Item location: 75053 Gondelsheim, Germany Very good, almost as-new condition – see photos Shipping by freight carrier or collection by appointment only

Stanje: pripravljen za uporabo (rabljen), Siemens 6AV7615-0AB32-0CH0 Panel PC 670, used, typical signs of use, 100% functional Rjdpfxsi Eddbo Agtst

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 15.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LP80VHK1, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 2.500 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), Oprema: dokumentacija / priročnik, Tehnični podatki stiskalnice: Proizvajalec Presona AB Tip: LP80VHK1 Leto izdelave: 2007 Stiskalna sila glavne stiskalnice 78,5 t Specifična stiskalna sila 95 N/cm² Stiskalna sila predstiskalnice 28 t Prostornina stiskalnega prostora 2,7 m³ Dimenzije dovodnega jaška 1.500 x 1.100 mm Teoretična zmogljivost 930 m³/uro Zmogljivost v delovnih pogojih 410 m³/uro Dimenzije bal 750 x 1.100 mm Pogonska moč 55 kW Vezi 5-kratno vertikalno, popolnoma avtomatsko Pretočna zmogljivost pri nasipni gostoti Gostota 30 kg/m³ približno 9 do 12 t/uro, Gostota 50 kg/m³ približno 14 do 17 t/uro, Gostota -100 kg/m³ približno 16 do 25 t/uro,g Pretočna zmogljivost pri MSW (komunalnih trdnih odpadkih) približno 20 do 27 t/uro, odvisno od materiala Teža bal 450 do 600 kg, odvisno od materiala in dolžine bal Rsdpfx Agjxw H Iyetst Prostornina rezervoarja za hidravlično olje 1.000 l Dimenzije stiskalnice z nameščenim lijakom 10.985 x 3.750 x 4.310 mm (D x Š x V) Dimenzije za transport brez stiskalnice 10.985 x 2.300 x 2.900 mm Teža stroja stiskalnice približno 24 t Naprava za nakladanje Naprava za vodenje bal od drče do tal Popolnoma avtomatska naprava za vezanje z 5 vrstami vezalne žice Vodila za žico za dovajanje 10 bobinov s težo 500 kg. Hidravlični sistem s kartušno montažo Krmilni sistem za 2 transportna traka Krmilni sistem stiskalnice s krmilnikom PLC Fotocelice za dvofazno polnjenje stiskalne komore Števec časa Števec bal Števec dolžine bal Tehnična dokumentacija

Stanje: skoraj kot novo (rabljeno), Horizontalne jeklene posode iz ogljikovega jekla, 73.000 l Rjdpfsibh S Hox Agtet Dimenzije: 3x 11 m Debelina cilindra: 8 mm Debelina dna: 12 mm Opremljene z lestvijo.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6608941, Leto izdelave: 2018, obratovalne ure: 4.536 h, nosilnost: 2.000 kg, vrsta goriva: električni, gradbena višina: 1.500 mm, dolžina vilic: 2.350 mm, vrsta pogona: Elektro, Low-lift pallet truck Rjdpjuhxk Tefx Agtjt Chassis number: 6608941 Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 24V Description: Toyota LPE200 Ref. No.: M0518 Year of manufacture: 2018 Operating hours: 4536 The machine is in very good visual and technical condition. Charger available on request. Fast and straightforward transport can be arranged! This listing is intended solely for device identification purposes. A detailed description of the condition and optional features is provided individually upon request. Subject to errors and prior sale, sale exclusively to commercial customers. All sales of used equipment are made with exclusion of any warranty and/or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other machines available on-site.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6386016, Leto izdelave: 2015, obratovalne ure: 8.327 h, nosilnost: 2.500 kg, vrsta goriva: električni, gradbena višina: 1.290 mm, dolžina vilic: 1.590 mm, lastna masa: 992 kg, vrsta pogona: Elektro, Low-level order picker Chassis number: 6386016 Technical condition: good Battery voltage: 24V Battery capacity: 375Ah Redpfxsuhwuds Agtst Battery year: 2015 Description: BT LPE 250 M0517 Year of manufacture: 2015 Operating hours: 8327 The machine is in very good cosmetic and technical condition. Charger available on request. Subject to errors and prior sale. If you have not found your desired forklift, please contact us. We have a large selection of other equipment on site.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6598789, Leto izdelave: 2018, obratovalne ure: 3.638 h, nosilnost: 2.500 kg, vrsta goriva: električni, gradbena višina: 1.300 mm, dolžina vilic: 2.400 mm, lastna masa: 1.285 kg, vrsta pogona: Elektro, Nizkonivojski komisionirni viličar Številka šasije: 6598789 Stanje: Pripravljen za uporabo in popolnoma delujoč Tehnično stanje: dobro Rsdpfsw I H N Tox Agtet Napetost baterije: 24V Kapaciteta baterije: 600Ah Leto izdelave baterije: 2020 Opis: BT LPE 250 Št.: M0576 Leto izdelave: 2018 Delovne ure: 3.638 Naprava je v dobrem vizualnem in tehničnem stanju. Pridržujemo si pravico do napak in predhodne prodaje. Če želenega viličarja niste našli, nas kontaktirajte. Na zalogi imamo še veliko drugih naprav.