Balirni stroj

Presona AB LP 85 VH1

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: Fgsdpfovf E Avjx Abtoc The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: novo, Klanke Supercut roll slitter for efficient cutting of waste rolls. Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Technical data: Knife length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Fgedpfxjn I Rgpe Abtjc Cutting force: 50 tons Made to order Price and further information upon request. We are happy to provide you with a non-binding quotation.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.000 mm, širina bale: 750 mm, višina bale: 750.750.750 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 7.500 kg, kapaciteta rezervoarja za olje: 500 l, moč: 30 kW (40,79 KM), lastna masa: 7.500 kg, vhodna frekvenca: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific press force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput: 200 m³/h Fgedpfxeic Rl De Abtec Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is removed.

Stanje: pripravljen za uporabo (rabljen), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of recyclable residual materials in industrial and craft settings: - Cardboard boxes - Foam - PET bottles - Insulation mats - and other baled materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800x1100x1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5,420 kg - Average pressing cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD baler Technical data of the baler: Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: Depending on material, approx. 500–600 kg Fgedpfxera A E Us Abtsc Bale tying: triple, manual Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction ensures long-term operation Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HBC 140 2x75kW 2001 (210-008-01), stiskalna sila: 155 t, teža bale: 1.500 kg, pritisk: 250 letvica, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-ratten bekabeling Draaiuren: 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards', inclusief 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de feitelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en opnieuw gelast waar nodig. Dit geldt ten minste voor de volgende onderdelen: • Persplunjer, • Frame, • Perskanaal, • Voorpersklep Fgodpfxotvau Ao Abtec Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en alle benodigde reparatie- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw verpakt. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke plekken. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen door nieuwe. Cilinders: De cilinders worden opnieuw verpakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en schoongemaakt. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (mens-machine-interface) worden vervangen door de nieuwste Schneider M340-versie, inclusief de meest recente software.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, - Stroj v zelo dobrem tehničnem in vizualnem stanju - Takoj na voljo - Prodaja vključuje: - Škarje za staro železo: Zato FCE40 ali Genesis GXP400R Fsdpey Dc Nvjfx Abtogc - Dvigalo - Dodatna priklopna oprema na voljo po dogovoru

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W230-028, stiskalna sila: 80 t, trajanje garancije: 24 meseci, pritisk: 250 letvica, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45kW) equipped with vertical tying. Fedpfotvat Tox Abtsgc This baler has already been completely refurbished in our overhaul workshop. The refurbishment was carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including a 2-year warranty. The press is supplied with the following options: * support stands, * intermediate hopper, * bale exit chute, * wire spool platforms

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.900 h, številka stroja/vozila: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Throughput based on material bulk density: * 30 kg/m³ = 7-9 t/h * 50 kg/m³ = 8-9 t/h * 100 kg/m³ = 11-14 t/h - Hopper length: 1500 mm - Hopper width: 1100 mm - Feed chamber volume: 2.7 m³ - Bale width: 1100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400-550 kg - Number of vertical tying wires: 5 pcs. - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Hydraulic tank capacity: 600 l - Motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor Fgodpfxsyrhi Ne Abtoc - Year of manufacture: 2014 - Specifications: * Conveyor width: approx. 1300 mm * Length of horizontal section: 5,500 mm * Length of inclined section: approx. 10,800 mm * Conveyor weight: approx. 6 t Scope of delivery: - Baler, control cabinet, operator panel, conveyor belt for sale. The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Viewing available by appointment. We assume no liability for technical information or possible errors. Video material can be provided upon request.

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN 336, rezalna sila: 420 t, moč: 80,9 kW (109,99 KM), skupna širina: 2.800 mm, skupna dolžina: 15.000 mm, skupna višina: 3.400 mm, skupna masa: 54.000 kg, dolžina rezanja (maks.): 2.000 mm, leto zadnje generalne obnove: 2016, Rabljen hidravlični škarje za staro železo LEFORT 420 t / Polmobilni Tip C 420TD Fjdpfx Abey Hq Eqotegc Vključno z HF daljinskim upravljanjem Možna postavitev brez temeljev – stroj je nameščen na 300 mm jeklenem okviru, vključno s 4 stranskimi podporami za samostojno nakladanje in razkladanje. Rezanje sila: 4200 kN Širina reza: 800 mm (rezilo 820 mm) Višina reza: 520 mm