Razdelilnik kolutov Rezalnik kolutov Giljotina

Klanke RGS50A Supercut

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, Bwsdpfxjvgrh Us Afnsi We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: novo, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm and made from various materials such as PE, PP, and PVC. Bedoghgd Iepfx Afnjwi These machines are capable of directly shredding plastic pipes up to 9 meters in length without the need for pre-cutting or sawing. At the heart of the system are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently process the material at low rotational speed. The pipe is fed into an enclosed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed via a belt to a granulator. The granulator reduces the material to directly processable regrind. The entire system is automatically controlled via a central control unit. Further advantages of the system include low energy consumption, prevention of power peaks, and minimization of accident risks during the pre-shredding process.

Leto izdelave: 2015, Stanje: generalkompletno obnovljen (rabljeno), Overband plate magnet Bwjdpfed Dy U Rex Afnoi Constructed in stainless steel 1.4301, fully seam-welded 620 x 420 x 200 mm Fully welded housing Lifting eyes for suspension

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 1.530 h, Funkcionalnost: popolnoma funkcionalen, moč: 129 kW (175,39 KM), Naprodaj je Arjes Impaktor 250 EVO Letnik: 10/2022 Delovne ure: 1530 Bwedpfx Aew Nyt Iofnoi Vgrajena je lopatična gred za les, plastiko, komunalne odpadke ipd. Priložena je tudi betonska gred. Stroj je popolnoma delujoč in si ga je mogoče ogledati v delovanju.

Stanje: rabljeno, Leto izdelave: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained, ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and reinforced cutting frame. — Features / Scope of Delivery • 1 set of armored shafts HW 8/10 with comb scrapers and re-breaking bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with comb scrapers and re-breaking bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine output: approx. 566 kW (approx. 770 HP) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked chassis, hydraulically driven Applications: scrap, commercial waste, bulky waste, mixed waste, wood, recyclables Bodpfsx Nkhqox Afnewi — Condition: • Well-maintained machine • Fully operational • Sale as inspected on-site Additional Information / Service History The machine has always had a full maintenance and service contract directly with Lindner. All maintenance and service work has been performed professionally according to manufacturer specifications and documented. Notes: • Sale is without any warranty or guarantee. • No returns or renegotiation. • Subject to prior sale. All details are provided without guarantee. The seller accepts no liability for any errors, incompleteness, or changes to the information provided. The sale is exclusively subject to prior sale.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12786 040, skupna masa: 20.000 kg, premer rotorja: 640 mm, skupna dolžina: 4.900 mm, skupna višina: 2.600 mm, skupna širina: 4.100 mm, širina rotorja: 2.000 mm, moč: 203 kW (276,00 KM), največja hitrost vrtenja: 340 obr/min, vhodni tok: 415 A, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The Vecoplan VAZ 2000 M F-T is a powerful single-shaft shredder. This robust shredder provides an efficient and reliable solution for a wide range of applications. Areas of application: - Household waste - Plastics Bjdpfxsurkc Ro Afnowi - Paper With its proven technology and high throughput capacity of 4-5 tonnes per hour, the VAZ 2000 M F-T is the ideal choice for shredding and volume reduction in waste management and recycling processes. The images shown are sample images only. They do not depict the actual machine being offered; they are for illustrative purposes to show what the machine may look like after reconditioning. Price on request.

Stanje: novo, - Motor power: 7.5 kW - Cutting force: 20 tons Cutting channel designed for: - maximum roll length: 1100 mm - maximum roll diameter: 900 mm - Machine weight: approx. 2500 kg - Tank capacity: approx. 100 litres - Safety guard in the operating panel area and on the opposite side - Colour scheme: machine body in RAL as per customer's request Safety guard/cutter bar in RAL 1028 melon yellow Bjdpfoftnt Nex Afnjwi Custom order item Price and further information upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, Type: DW 3060 Typ D Année de fabrication : 07/2015 Emplacement : Allemagne Heures de fonctionnement : 1 950 h Disponible à partir de : sur rendez-vous Équipement : Moteur diesel MTU R 1300 EUROMOT IV, 320 kW Poids total : env. 25 000 kg Entraînement hydraulique Télécommande radio à 18 canaux Convoyeur arrière 5,5 m, rabattable hydrauliquement Extension de peigne Dispositif d'humidification 21 dents de rouleau forme C, système de changement rapide DoubleLock 20 dents de peigne trapézoïdales Aimant de séparation Rehausseur de trémie Détails du service La machine est en très bon état technique et visuel La machine recevra un nouveau réducteur planétaire avant livraison La machine bénéficiera d'une inspection technique et d'un entretien avant livraison La machine est vendue dans l'état dans lequel elle se trouve au moment de la remise. Le vendeur n'assume aucune responsabilité pour les défauts. Bwsdpfx Afoxrtt Eensi Sous réserve de vente préalable, de modifications et de réparations.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 38 t, moč: 5,5 kW (7,48 KM), Neu auf Lager Bedpfxowhfu As Afnowi Avermann MPC 20 PEL Optional mit Behälterlift

Stanje: novo, Leto izdelave: 2025, Moč motorja 7,5 kW - Rezna sila 30 t Rezni kanal zasnovan za: - maks. dolžina role 1500 mm - maks. premer role 1250 mm - Masa stroja cca 3800 kg - Prostornina rezervoarja cca 110 litrov - Zaščitna rešetka v območju upravljalne plošče in na nasprotni strani - Zaklep noža Bsdpfx Ajltmi Sofnowi - Ravna izvedba razcepne mize - Dokumentacija 2x v nemščini (1x v besedilni obliki, 1x USB) - Barva RAL 5012 svetlo modra Zaščitna rešetka/nožni nosilec RAL 1028 melonsko rumena Stroj na zalogi – takoj dobavljiv Cena in dodatne informacije na zahtevo