Balairka

Presona AB LP 100 CH2 S

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Fpedpfx Aofx Hv Hehmeh Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Fedpfx Ahsvf E Avsmeph Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: rabljeno, Adhesive application Glue application Adhesive application - Glue application specified for package heights up to 300 mm via 1 application roller - Drive via 0.37 kW worm gear motor - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Fedpfx Ascht Nyohmeph Dimter spare parts Dimter accessories

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, - Stroj v zelo dobrem tehničnem in vizualnem stanju Fsdpfxsy Dc Nvo Ahmoph - Takoj na voljo - Prodaja vključuje: - Škarje za staro železo: Zato FCE40 ali Genesis GXP400R - Dvigalo - Dodatna priklopna oprema na voljo po dogovoru

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 18.520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Applications: Commercial waste for thermal or material recycling, e.g. paper, cardboard, plastics and foam materials, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet: fully equipped with ABB frequency converter Recooling unit Operator console Hopper Drive motors: 200 kW Fedewxmb Eopfx Ahmsph Hydraulic unit: complete Total weight: approx. 21 t Dimensions (LxWxH): approx. 5000 x 2800 x 3000 mm Inspection: possible by prior arrangement Delivery time: immediate

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. Fodpfx Ahov T I Evemeph The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 2022,

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN 336, rezalna sila: 420 t, moč: 80,9 kW (109,99 KM), skupna širina: 2.800 mm, skupna dolžina: 15.000 mm, skupna višina: 3.400 mm, skupna masa: 54.000 kg, dolžina rezanja (maks.): 2.000 mm, leto zadnje generalne obnove: 2016, Rabljen hidravlični škarje za staro železo LEFORT 420 t / Polmobilni Tip C 420TD Vključno z HF daljinskim upravljanjem Možna postavitev brez temeljev – stroj je nameščen na 300 mm jeklenem okviru, vključno s 4 stranskimi podporami za samostojno nakladanje in razkladanje. Rezanje sila: 4200 kN Širina reza: 800 mm (rezilo 820 mm) Višina reza: 520 mm Fodpfx Ajy Hq Eqshmoph

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.900 h, številka stroja/vozila: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Throughput based on material bulk density: * 30 kg/m³ = 7-9 t/h * 50 kg/m³ = 8-9 t/h * 100 kg/m³ = 11-14 t/h - Hopper length: 1500 mm - Hopper width: 1100 mm - Feed chamber volume: 2.7 m³ - Bale width: 1100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400-550 kg - Number of vertical tying wires: 5 pcs. - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Hydraulic tank capacity: 600 l - Motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: * Conveyor width: approx. 1300 mm * Length of horizontal section: 5,500 mm * Length of inclined section: approx. 10,800 mm Fsdoyrhi Njpfx Ahmsph * Conveyor weight: approx. 6 t Scope of delivery: - Baler, control cabinet, operator panel, conveyor belt for sale. The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Viewing available by appointment. We assume no liability for technical information or possible errors. Video material can be provided upon request.

Leto izdelave: 2012, obratovalne ure: 1 h, stanje: rabljeno, Transmission: Automatic Power: 1 kW (1 HP) Unladen weight: 20,000 kg For further information, please contact Emal Jaweed. Scrap press, Hassel Ariete 480, Bonfiglioli crane, year of manufacture: 2012. Dimensions: length: 9,600 mm, width: 2,500 mm, height: 2,820 mm, weight: 20,000 kg, engine: 6-cylinder Deutz. Body: hook-lift system / easy relocation. Video available. Additional information: Fedjx R T D Depfx Ahmsph * We are offering over 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing options available. * Specialist for worldwide transport & shipping. * No liability for printing or typographical errors. * Subject to prior sale and errors. * Trade-in possible. * For vehicle and used machinery purchases, only the general terms and conditions of Jaweed GmbH apply. * Further information and our GTCs can be found on our website. All sales are subject to our general terms and conditions (listed: ... / GTC).