Panimatic Rabljena Fermentacijska Komora Panimatic 750X900 Mm nakup rabljenega (80.749)

Stanje: rabljeno, - Dimenzije: 925x1090x2270 mm - 20 polic Bwedpswxvu Ijfx Agtol - Pladnji: 750x900 mm - Temperatura: 10°C - Masivna vrata - Moč: 1450 W - Teža: 235 kg - Obnovljena oprema: Oprema je pripravljena po naročilu. Časi prevzema in vračila so dogovorjeni v tem trenutku (ceno prosim zahtevajte po obnovi).

Stanje: rabljeno, Razširitev regalnega sistema s 16 skladiščnimi posodami – razširitveni modul za modularni skladiščni sistem Ta razširitev regala s 16 skladiščnimi posodami je praktičen dodatek že obstoječim regalnim sistemom in ponuja učinkovito rešitev za enostavno povečanje skladiščne kapacitete. Zaradi modularne zasnove je sistem mogoče prilagodljivo namestiti. Bedpfxoy Hpvzo Agtjwl

Stanje: rabljeno, Razširitev regala s škatlami za shranjevanje – razširitveni modul za modularne skladiščne sisteme Ta razširitev regala s škatlami za shranjevanje je praktičen dodatek k obstoječim regalnim sistemom in ponuja učinkovito rešitev za enostavno povečanje skladiščnih zmogljivosti. Bsdoy Hpvnepfx Agtowl Zaradi modularne zasnove je sistem prilagodljiv

Stanje: rabljeno, - Dimenzije: 660x880x2305 mm - Pekači: 400x600 mm - Leto: 2008 - Temperatura: 43°C - Hladilno sredstvo: R404A - Količina hladilnega sredstva: 0,33 kg - Moč: 0,90 kW Bwedpfx Agjwxvvfjtel - Napetost: 220–240 V

Stanje: rabljeno, -Nadzorovana fermentacijska komora: -Dimenzije: 1150x3750x2225 mm -Zunanja širina komore: 1.150 mm -Zunanja globina komore: 3.750 mm -Tip fermentacijske komore: BFC -Dimenzije vozička: 600 x 800 (skupne mere 670x825) -Število vozičkov: 4 -Uporabna globina komore: 3.600 mm -Uporabna širina celice: 1.000 mm -Tip vratnega okvirja: Enokrilna vrata 1.000 mm -Stran izparilnika: Levo -Krmilna plošča: OPTICOM -Električni priklop BFC: P6: 400-440V / 3F + N + PE / 50-60Hz -Tunelska komora: Ne -Leto proizvodnje: 12/2014 -Obnovljena oprema: Oprema se pripravi po naročilu. Dobavni roki se določijo ob naročilu (prosimo, povprašajte za ceno po obnovi). -Samodejno upravljanje fermentacijskega cikla -Temperaturno upravljanje -Ročni in samodejni način -30 programirljivih ciklov -Samodejno upravljanje datuma zaključka cikla -Upravljanje napak Bwjdjyman Topfx Agtol -Gladke tipke, odporna proti praskam.

Stanje: rabljeno, -Dimenzije: 635x1200x2250 mm -Serijska številka: 2001/1558B -Število plošč: 24 -Leto: 2001 -Moč: 1,1 kW Bodpfx Agewxvunjtewl -Napetost: 230 V Noy Tdxowxvunsugjda -Frekvenca: 50 Hz

Stanje: rabljeno, - Dimenzije D x V x Š: 770x1150x2220 - Pladenj: 400x600 ali 600x800 - 22 nivojev - Tip: AA48V - Serijska št.: 2001/1522A Bjdpfx Agjwxvuzjtowl - Leto izdelave: 2001 - Moč: 1,1 kW - Napetost: 230V

Stanje: dober (rabljeno), Leto izdelave: 2004, 329 RABLJENA hladilno-vzhajalna komora Miwe GVA. ZUNANJE MERE (v cm): - viš: 260, - dł: 390, - šir: 180. NOTRANJE MERE (v cm): - viš: 190, - dł: 335, - šir: 140. Bodpoyqnvyofx Agtjwl Navedena cena je neto cena. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZSKO, RUSKO, UKRAJINSKO. Na zalogi imamo veliko pekarskih peči: etažne peči, rotacijske peči, plinske, oljne, električne, različnih proizvajalcev. Ponujamo tudi stroje, pekarsko opremo, linije za žemljice, linije za kruh. Če želite videti našo celotno aktualno ponudbo, obiščite naš profil Bakeres.

Stanje: rabljeno, - Dimenzije: 2150x1330x2100 mm - Dimenzije vrat: 1010x1900 mm Bedpfx Agsx Arzcetowl - 2 vozička 600x800 ali 800x800 - Serijska številka: 10130992 - Leto izdelave: 2005 - Napetost: 400V - Frekvenca: 50Hz - Obratovalna temperatura: 32°C - Grelna moč: 2,5 kW - Hladilna moč: 2,99 kW - Teža: 420 kg

Stanje: zelo dobro (rabljeno), - Model: Omega 1 - Serijska številka: 13770392 - Dimenzije: 2200x2600x1420 mm - Širina traku: 800 mm - Globina traku: 1630 mm - Višina pekače komore: 235 mm - Površina peke: 6,6 m2 - Tloris: 3,7 m2 - Število etaž: 5 - Moč ogrevanja: 65,2 kW - Napetost: 400V - Frekvenca: 50Hz Bwedpfxswxmp As Agtol - Najvišja temperatura: 300 °C - Leto izdelave: 2008 - Teža peči: 2070 kg - Priložen nakladalni dvigalo - Obnovljena oprema: enota se pripravlja po naročilu; prevzemni in vrnitveni termini so določeni takrat (za ceno po obnovi povprašajte). Oglas je bil preveden samodejno. Možne so napake pri prevodu.

Stanje: zelo dobro (rabljeno), Naprodaj opora (steady rest) za stružnico. Profesionalna delavniška oprema za stabilno vodenje dolgih in težkih obdelovancev med obdelavo. Močna lita konstrukcija – maksimalna togost in vzdržljivost. Delovna odprtina pribl. 150 mm (izmerjeno s suvilnikom). Odpirajoč okvir – hitro in udobno vpenjanje obdelovanca. Nastavljivi čepi z drsnimi konicami. Priprava za pritrditev na ležišče stružnice preko osnove z odprtino. Podpira je namenjena struženju gredi, cevi, palic in drugih dolgih elementov, ki zahtevajo oporo med obdelavo. Bjdpfjw Sfpysx Agtswl

Stanje: zelo dobro (rabljeno), Na prodaju je profesionalni mjerni set japanske tvrtke Mitutoyo, model SBM-25CXST (kat. br. 568-925). Set je namijenjen za precizno mjerenje promjera otvora i cilindričnih elemenata u rasponu od 12 do 25 mm. Sadržaj seta: digitalni unutarnji mikrometar Mitutoyo ABSOLUTE Digimatic s LCD zaslonom, tri mjerne glave: 12–16 mm, 16–20 mm, 20–25 mm, podešavajući prsteni: Mitutoyo 19,997 mm i HK66 19,001 mm, produžeci i dodatna oprema, originalna drvena kutija Mitutoyo s prilagođenom pjenom. ABSOLUTE sustav jamči stabilna mjerenja bez potrebe za ponovnim postavljanjem nule pri svakom uključivanju. Digitalno očitanje omogućuje brza i pouzdana mjerenja visoke točnosti. Set je u vrlo dobrom stanju, kompletan i spreman za rad. Idealan je za mjeriteljske laboratorije, odjele kontrole kvalitete i alatničke radionice. Bjdpow R E Hvofx Agtswl

Stanje: zelo dobro (rabljeno), Naprodaj profesionalna stroj za odrezovanje in glajenje cevi TUBOGRAT nemškega proizvajalca Tracto Technik Spezialmaschinen. Naprava je namenjena obdelavi koncev cevi ter odstranjevanju notranjih in zunanjih ostružkov. Idealna za delavnice, proizvodnjo in montažo. Trdna konstrukcija zagotavlja dolgo in zanesljivo delovanje. Tehnične specifikacije: Proizvajalec: Tracto Technik Spezialmaschinen KG Model: TUBOGRAT TG 138 Obseg premerov: 6 do 42 mm Hitrost vrtenja: 180 obr/min Smer vrtenja: levo Napajanje: 380 V Faze: 3 Frekvenca: 50 Hz Moč: 0,12 kW Tok: 0,4 A Stanje: Bwodpjyvgp Tofx Agtel Naprava v dobrem tehničnem stanju Vidne sledi uporabe Stroj deluje

Stanje: zelo dobro (rabljeno), Stroj za presejanje in sortiranje sipkih materialov ali drobnih kovinskih elementov. Zelo dobro ohranjen – popoln, z originalnim pogonom, krmilno omaro in kompletom kalibracijskih sit. • Proizvajalec: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Leto izdelave: 1972 • Pogon: motor Bauknecht 0,55 kW, 380/220 V, 2850 vrt/min • Krmilna omara: Carl Kurt Walther GmbH, Wuppertal • Jeklena konstrukcija, stabilen okvir s transportnimi kolesci • Trifazno napajanje 400 V • Komplet presejalnih sit v lesenih okvirjih (številke 1–6) • Velikost mrež sit: od 2 mm do 15 mm • Možnost prilagoditve in zamenjave sit • Glavno stikalo, upravljanje start/stop in zaščita pred preobremenitvijo • Zelo dobro stanje – po demontaži iz obrata, mehansko brezhiben Stroj je pripravljen za delo po osnovnem pregledu. Idealno za: kovinske obrate, livarne, industrijske laboratorije, sortiranje granulata, peska ali drobnih delov. Bsdpfx Ajxmt Eqogtewl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) Bodpomhhypsfx Agtjwl - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: Bwodpjmhh Dhjfx Agtol - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard Bsdpfxsmhh Dze Agtewl - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Bwsdpfxsmhhx Io Agtjl Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany Bwedpfomhhyajx Agtjl - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm Bedpfx Agjh Ek Dastjwl - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth Bsdpfxomhh Ans Agtewl - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Bedpfx Agsmidyfjtewl Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Bodpfemkixwjx Agtowl Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Bwedomhhf Sepfx Agtol - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Bwodpfomhhl Hjx Agtsl Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards