Kragarmregal Ohra 3M Höhe Ausleger 800 Kg nakup rabljenega (77.346)

Stanje: dober (rabljeno), Nosilno konzolno regal, OHRA, 3 m, višina Tjdpfjcd Dwyjx Aqtsb Na zalogi več kot 100 m, glejte slike. Višina 3 m Izstop konzole 100 cm Nosilnost/izstop konzole 800 kg 4,5 tekočih metrov, 4 nosilci z izstopom konzole Cena za pogajanja: 2.360,00 € /neto Ponudba vključuje: 4 nosilci z nogami, višina 3 m 4 nastavljive konzole, 100 cm na nosilec, nosilnost 800 kg/konzola. Diagonalne vezi, opornice in distančniki so vključeni. Razmik med okvirji 150 cm Nosilnost na nosilec na eni strani 3.200 kg Na voljo v višinah 2,5 m, 4 m ali 6 m. Druge konfiguracije na zahtevo. Stalno na zalogi več kot 3000 tekočih metrov regalov za palete različnih proizvajalcev. Transport in montaža na zahtevo možni. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do prodaje predhodno. Glejte naše splošne pogoje, vse cene so brez DDV, odvisno od zaloge.) Lenox Trading – vrhunska oprema za skladiščenje in rabljenih/novih regalov za težke obremenitve Opis: Iščete visokokakovostne regalne sisteme za skladiščenje? Lenox Trading je z okoli 100 zaposlenimi eden največjih trgovcev z novo in rabljeno opremo za skladiščenje v celotni regiji DACH (Avstrija, Nemčija, Švica). ⚡ HITRA DOBAVA: • Več kot 10.000 tekočih metrov regalov, ki so na voljo takoj. • 20.000 m² skladiščnih podestov in jeklenih podestov, ki so na voljo takoj. • 30–50 polnih tovornjakov prevoženih tedensko, kar zagotavlja največjo izbiro. 📦 NAŠA PONUDBA (UGODNO NAKUPOVANJE NA SPLETU): Ne glede na to, ali kupujete regal za palete, regal za težke obremenitve, visoke regale, regale s policami ali regale za IBC-posode – dobavljamo in montiramo po vsej Evropi s svojo lastno ekipo! Vključno z načrtovanjem v CAD-u, transportom, demontažo in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ LIKVIDACIJSKIH POSTOPKOV/KONKURZOV: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regal za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Nosilno konzolna regala (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠ DRUGI STEBER POSLOVANJA: SPLETNE AUKCIJE IN LIKVIDACIJA Pri demontaži in čiščenju ponujamo celovit paket storitev: 1. Pausalno odkupovanje: odkup komercialne robe, opreme in celotnih zalog, vključno s popolnim čiščenjem. 2. Aukcija na podlagi provizije: izvajanje dražb v našem imenu. Naše celovite storitve, ki jih izvajajo naši zaposleni: katalogizacija, priprava pisarne, pregled, izročitev blaga, logistika, razstavljanje in popolno čiščenje. Ne glede na to, ali ste na nas naleteli zaradi regalov za težke obremenitve ali iščete pocinkane regale za težke obremenitve / regalski sistem za težke obremenitve – zagotavljamo najboljše pogoje. Stopite v stik z nami za neobvezno ponudbo!

Stanje: novo, OHRA konzolni regal Cena po dogovoru: 6.540,00 € neto, iz skladišča Ponujate regal dolžine 7,5 m, sestavljen iz: 6 nosilcev z osnovo, višina 6 m + 4 nastavljivi konzolni izvedenci na nosilec (120 cm), nosilnost 900 kg/izvedenec. Diagonalni okrepki, podpore in distančniki so vključeni. Mostovi, mreže in iverne plošče so na voljo za doplačilo! Razdalja med okvirji 150 cm Dolžina konzole / izvedenca 120 cm Nosilnost 900 kg / izvedenec Nosilnost na en nosilec na eni strani 3.600 kg Na voljo več kot 100 metrov. Na voljo različne višine: 2,5 m, 3 m ali 4 m. Druge konfiguracije na zahtevo. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do medprodaje! Glejte naše splošne pogoje, vse cene so brez DDV, iz skladišča.) Lenox Trading – vrhunska skladiščna tehnika in regali za težke obremenitve, rabljeni in novi Opis: Iščete kakovostne skladiščne regale za nakup? Lenox Trading je z okoli 100 lastnimi zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno tehnologijo v celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ HITRO NA VOLJO: • Več kot 10.000 tekočih metrov regalov je takoj na voljo. • 20.000 m² skladiščnih podestov in jeklenih podestov je takoj na voljo. • Tedensko 30–50 cisternskih tovornjakov za maksimalno izbiro. 📦 NAŠA PONUDBA (UGODNO KUPITE SPLETU): Ne glede na to, ali kupujete paletni regal, regal za težke obremenitve, visoke regale, regale s policami, regale za pnevmatike ali regale za IBC-posode – mi dostavljamo in montiramo po vsej Evropi s svojo LASTNO ekipo! Vključno z načrtovanjem CAD, transportom, demontažo in montažo. 🏭 VRHUNSKE ZNAMKE, RABLJENE IN IZ LIKVIDACIJE: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regal za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 Todeby Uunjpfx Aqtjb • Konzolni regali (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠ DRUGI STEBER: SPLETNE AUKCIJE IN LIKVIDACIJA Pri demontažah in čiščenjih ponujamo resnično celovito rešitev: 1. Fiksna odkupna cena: odkup trgovskega blaga, opreme in celotnih skladiščnih zalog, vključno s popolnim čiščenjem. 2. Provizijska dražba: izvedba dražb po naročilu. Naša celovita storitev, ki jo izvajajo lastni zaposleni: katalogizacija, priprava pisarne, ogled, izročitev blaga, logistika, demontaža in popolno čiščenje. Ne glede na to, ali ste na nas naleteli zaradi regalov za težke obremenitve ali iščete regal za težke obremenitve, pocinkanega / regalski sistem za težke obremenitve – zagotavljamo najboljše pogoje. Kontaktirajte nas za neobvezno ponudbo!

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel girders, wooden slats, and sheet material. With an overall length of approx. 13.20 meters, a height of approx. 4.00 meters, and arm lengths of approx. 120 cm, this long goods rack offers high storage capacity across a total of 4 storage levels (base level + 3 levels). Each cantilever arm supports up to 500 kg, and each upright can bear up to 2,250 kg. The cantilever arms are bolted and can be variably adjusted in height via a 200 mm hole grid. The fully hot-dip galvanized material ensures long-lasting protection for both indoor and outdoor use – Available as new stock from our warehouse in Wietmarschen. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of rack run: approx. 13.20 m - Overall height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Upright spacing (center-to-center): approx. 131 cm - Levels: base + 3 storage levels - Load capacity per arm: max. 500 kg (with evenly distributed load) Tsdpjzxd Rusfx Aqtsb - Load capacity per upright: max. 2,250 kg (with evenly distributed load) - Upright profile: IPE 160, approx. 400 cm, incl. base section - Upright hole pitch: approx. 20 cm - First hole above base: approx. 107.5 cm (top of base) - Topmost pair of holes: approx. 50 cm below upright top (top of upright) - Design: single-sided, arms bolted - Surface: fully hot-dip galvanized - Availability: new stock SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm, made from IPE 160, incl. base, 20 cm hole grid - 33 x cantilever arms, approx. 120 cm, made from IPE 80 (without deflectors) - Includes all connecting elements - Includes all required bolts - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany via our partner carrier – shipping costs depend on postal code - Professional assembly and disassembly by trained teams optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also available PLANNING & CONSULTANCY: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether new construction, modification, or extension – we will competently advise you on your racking configuration. Not found what you’re looking for yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You will find our phone number on our company page. We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: novo, The double-sided cantilever rack from BLT with a height of 315 cm is ideal for storing medium-weight long goods such as profiles, pipes, and bars in warehouses, workshops, or trade businesses. With an approximate rack length of 5.12 m, usable arm depth of about 80 cm, and a total of 5 levels per side (including base level), this cantilever rack provides clearly organized and easily accessible storage on both sides for long and bulky items. Each cantilever arm supports up to 500 kg and each upright up to 1800 kg per side. Bolted cantilever arms with guide deflectors ensure robust, practical use in daily operations. Made in Germany – Shipping within Germany already included, plus VAT. Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) - Usable depth of base level: approx. 80 cm - Load capacity per arm: max. 500 kg (with evenly distributed load) - Load capacity per upright: max. 1800 kg per side (without base level, with evenly distributed load) - Levels per side: Base + 4 storage levels (5 levels per side in total) - Design: Double-sided, bolted cantilever arms with guide deflector - Upright profile: IPE140 - Cantilever arm profile: IPE80 - Colour finish: RAL 7016 - Manufactured in Germany - Delivery: Shipping within Germany included, plus VAT Scope of delivery: - 5 × uprights made of IPE140, height approx. 3150 mm - 40 × cantilever arms, approx. 80 cm length, made of IPE80 - Including fastening material - Including heavy-duty anchors for floor fixation Tsdpfx Aezxpd Hsqtsb Advantages of the BLT cantilever rack: - Ideal for storing medium-weight profiles, pipes, and bars - Double-sided design for accessible storage on both sides - Bolted cantilever arms with guide deflector - 5 levels per side including base level for optimal space usage - Support up to 500 kg per arm and up to 1800 kg per upright per side - Stable floor anchoring with supplied heavy-duty anchors - Made in Germany - Shipping within Germany included Delivery: - Shipping within Germany included - Delivery includes mounting hardware - Secure floor anchoring with included heavy-duty anchors Inquiry & individual planning: Take advantage of our personal consultancy for your customized storage solution. Let us know your required dimensions, goods to be stored, and available space. Our experienced consultants will be happy to provide a non-binding quote with a tailored design and structural calculation for your custom cantilever rack. Use our inquiry form or contact us directly by phone. Together we will design your individual racking system.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Tjdofdkbhspfx Aqtjb - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation Todpfoguk Dkjx Aqteb - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: dober (rabljeno), Leto izdelave: 2014, Proizvajalec: DEMAG Nosilnost: 860 kg + 630 kg (opremljeno z dvema dvigali) Todeyu R Dzopfx Aqtsb Točne tehnične mere so prikazane na slikah. Tir za dvigalo je mogoče podaljšati s strukturami in nogami, prikazanimi na slikah, vendar pa so za podaljšanje potrebni tudi drugi elementi tira, ki niso na voljo!!

Stanje: skoraj kot novo (rabljeno), 60 m tekočih metrov regalov za pnevmatike Nedcon Novo in rabljeno, glejte slike. Višina 3 m Globina 50 cm Dolžina nosilca 3,7 m, nosilec s tovorno zmogljivostjo/polico 1000 kg Okvir modre barve Nosilec pobarvan v modro barvo Cena po dogovoru: 5.250,00 EUR neto, dobava iz skladišča Ponudba vsebuje: + 16 kosov okvirjev, predhodno sestavljenih, globina 50 cm, višina 3 m + 90 kosov nosilcev, dolžina 3,7 m, tovorna zmogljivost/polica 1000 kg + 180 kosov varnostnih zapon + 64 kosov betonskih sidrov Izdelek je na zalogi. Todji Hl T Iepfx Aqtsb Transport in montaža možna po dogovoru. Ogled možen kadarkoli po predhodnem dogovoru. Dodatne informacije na zahtevo. Stalno več kot 5000 m tekočih metrov regalov za palete različnih proizvajalcev na zalogi. (Pridržane spremembe in napake v tehničnih podatkih, informacijah in cenah ter možnost vmesne prodaje! Glejte naše splošne pogoje, vse cene so brez DDV, dobava iz skladišča) Lenox Trading – vrhunska skladiščna tehnika in regali za težke obremenitve, rabljeni in novi Opis: Iščete kakovostne skladiščne regale za nakup? Lenox Trading je s približno 100 lastnimi zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno tehniko v celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ TAKOJ NA VOLJO: • Več kot 10.000 tekočih metrov regalov, ki so na voljo takoj • 20.000 m² skladiščnih podestov in jeklenih podestov, ki so takoj na voljo • 30–50 tovornjakov s prikolico tedensko obremenitev za največjo izbiro 📦 NAŠA PONUDBA (UGODNO NAKUPOVANJE V SPLETU): Ne glede na to, ali kupujete paletne regale, regale za težke obremenitve, visoke regale, regale za police, regale za pnevmatike ali regale za IBC-kontejnerje – dobavljamo in montiramo po vsej Evropi z našo LASTNO ekipo! Vključno s CAD načrtovanjem, transportom, razstavljanjem in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ LIKVIDACIJE / KONKURSA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Tip MPB, Tip E, regali za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Regali s konzolnimi rokami (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠE DRUGO POSLOVANJE: SPLETNE AUKCIJE IN LIKVIDACIJA Pri razstavljanju in čiščenju ponujamo pravo, celovito storitev: 1. Nakup po pavšalni ceni: Nakup blaga, opreme in celotnih zalog, vključno z popolnim čiščenjem. 2. Aukcija na provizijo: Izvajanje dražb v našem imenu. Naše storitve, ki jih izvajajo lastni zaposleni: katalogizacija, priprava pisarne, ogled, izročitev blaga, logistika, razstavljanje in popolno čiščenje. Ne glede na to, ali ste na nas naleteli zaradi regali za težke obremenitve ali iščete regale za težke obremenitve, pocinkane / regalski sistem za težke obremenitve – zagotavljamo najboljše pogoje. Kontaktirajte nas za neobvezno ponudbo!

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING2/3/4/5/6/7, nosilnost na konzolno roko: 1.000 kg, višina police: 3.000 mm, skupna dolžina: 21.000 mm, skupna širina: 2.150 mm, skupna višina: 3.000 mm, razmak osovin: 1.480 mm, nosilnost na stojalo: 7.500 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 6.000 kg, Oprema: dvostranski, Ohra - Double-sided Cantilever Rack, Long Materials Rack, Heavy Duty Rack Consisting of 15 uprights + 60 cantilever arms Tsdpfxjv Smm No Aqtsb Height: 3.05 m – Uprights IPB200 (HEB200) – Upright spacing: 1.48 m center-to-center Total depth: 2.15 m (double-sided) Arms: 90 cm – IPE100 Load capacity per arm: 1,000 kg Load capacity per upright: 7,500 kg Wooden inserts can be supplied on request. 6 racks available!!!! 4 with 4 levels – 60 arms each 2 with 6 levels – 90 arms each (+2,000€ surcharge) Very good condition, see pictures. Forklift available for loading. Collection by appointment only in 75053 Gondelsheim. Shipping via freight carrier possible, please inquire with your postcode.

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING8+10 / 9, nosilnost na konzolno roko: 1.000 kg, višina police: 3.000 mm, skupna dolžina: 21.000 mm, skupna širina: 2.150 mm, skupna višina: 3.000 mm, razmak osovin: 1.480 mm, nosilnost na stojalo: 7.500 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 6.000 kg, Oprema: dvostranski, Ohra - double-sided cantilever racking, long goods rack, heavy-duty rack Consisting of 10 uprights + 40 cantilever arms Height: 3.05m – Uprights IPB200 (HEB200) – Upright spacing 1.48m center-to-center Total depth: 2.15m (double-sided) Arm length: 90cm – IPE100 Load capacity per arm: 1000kg Upright load capacity: 7500kg Wooden inserts can be supplied upon request. Three racks available! No. 8+10 – 4 racks with 4 levels each – 40 arms Todpfxsv Smrxj Aqteb No. 9 – 1 rack with 6 levels – 60 arms (+ €1,000 surcharge) Very good condition, see pictures. Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping via freight carrier possible, please inquire with ZIP code

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING1+11, nosilnost na konzolno roko: 1.000 kg, višina police: 3.050 mm, skupna dolžina: 21.000 mm, skupna širina: 2.150 mm, skupna višina: 3.050 mm, razmak osovin: 1.900 mm, nosilnost na stojalo: 7.500 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 7.000 kg, Oprema: dvostranski, OHRA K60K - Double-sided Cantilever Rack for Long Goods / Heavy-Duty Rack Rack available 2x!!! 12 uprights - 48 cantilever arms K60K Todpjv Smk Iofx Aqtjb Height: 3.05 m - Uprights IPE200 - Upright spacing: 1.9 m (center to center) Total depth approx. 2.15 m (double-sided) Arms: 90 cm - IPE100 Load capacity per arm: 1000 kg Load capacity per upright: 7500 kg Including wooden inserts Very good condition, see photos Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with your postal code

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING11, nosilnost na konzolno roko: 1.000 kg, višina police: 3.000 mm, skupna dolžina: 18.000 mm, skupna širina: 2.000 mm, skupna višina: 3.000 mm, razmak osovin: 1.500 mm, nosilnost na stojalo: 7.000 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 6.000 kg, Oprema: dvostranski, Cantilever racking, long goods rack, heavy-duty racking – double-sided Consisting of 13 uprights + 52 cantilever arms Height: 3m – uprights: IPE200 – upright spacing: 1.5m center-to-center Total depth: 2m (double-sided) Arms: 90cm – IPE100 Load capacity per arm: 1,000 kg Load capacity per upright: 7,000 kg Arms are infinitely adjustable Includes cross beams from arm to arm, includes wooden inserts Very good condition, see pictures Tedpfsv Smr Sox Aqteb Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with your postal code

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg Tsdpfx Aemhh Dheqtsb - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. Tjdpfx Asmkixweqtob When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level. Todpomhhx Iefx Aqtjb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) Tjdpfxemhhf So Aqtjb - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Tjdpsmhhl Hefx Aqtob Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) Tsdpfomhh Dtox Aqtob - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: Todpjmidyfefx Aqtsb - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm Tjdpfxsh Ek Das Aqtob - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) Todpemhhyajfx Aqteb - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Tsdpfemhhypex Aqtjb Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth Tsdpomhh Anofx Aqtsb - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing Tedpfx Aqemhh Dzstsb - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, številka stroja/vozila: HB311, Vetter AS8-3.0 stebrno vrtljiv žerjav, nosilnost 800 kg Nosilnost pri maksimalnem iztegu: 800 kg / 0,8 t Višina: cca 4 m, spodnji rob nosilca: cca 3,67 m Izteg: cca 3 m, višina kljuke: cca 3,2 m Pritrdilna plošča: 105 cm Skupna teža cca 900 kg Z verižnim dvigalom Demag DC 800 kg (2 hitrosti dviganja) Priklop: 400V 16A, vrtljivo območje 360° Žerjav je demontiran in takoj na voljo Lokacija artikla: 75053 Gondelsheim Tedpfx Aqoy Tt Nxjtsb Prodaja se samo žerjav, prikazan na slikah Zelo dobro stanje – skoraj kot novo, glejte slike Dostava s špediterjem ali osebni prevzem po dogovoru